Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DISPLAY UNIT

Active
SPE8EN-26-T-2767Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three DISPLAY UNIT units with NSN/Part Number 7025-01-728-9463, under solicitation SPE8EN-26-T-2767, with a delivery requirement of 156 days after order. The supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization and comply with all Defense Logistics Agency packaging and quality requirements, including adherence to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformances unless otherwise specified. Attributes designated as critical, major, or minor must be verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Technical drawings are accessible only during the open solicitation period via the DIBBS portal. The item contains technical data subject to export controls under ITAR or EAR, prohibiting any transfer to foreign persons without explicit authorization, and mandates that contractors complete the required DOD export-controlled data training and obtain DLA approval prior to accessing such data. Only contractors with an approved US/Canada Joint Certification Program status are permitted to handle this technical information, governed by DFARS 252.225-7048. All activities are subject to the DLA Master List of Technical and Quality Requirements in effect on the solicitation or award date, and the point of contact for inquiries is Jennifer Esworthy at DLA.

General Info

Procure three display units with CMMC Level 2 certification, zero non-conformances, ITAR/EAR controls, and US/Canada certification.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQView Agency

NAICS

334112 - Computer Storage Device ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8EN-26-T-2767.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ
View Agency Profile
Office AddressUS
Contacts
Jennifer Esworthy
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DISPLAY UNIT
DISPLAY UNIT
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the
SPE8EN-26-T-2767
SECTION B
Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 7025-01-728-9463 Quantity: 3 EA Purchase Request: 7017585760QTY: 3 Delivery: 156 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334112
New
DIBBS
DISK DRIVE UNIT
Solicitation # SPE8EN-26-T-2659
This contract is for the procurement of five disk drive units with NATO Stock Number 7025-01-728-8546 and part number AFL3-S500, issued under solicitation SPE8EN-26-T-2659 by the Department of Defense’s Defense Logistics Agency. Delivery is required FOB origin to the receiving warehouse in Tracy, California, with a need ship date of January 18, 2027, and an original required delivery date of February 28, 2027. The units must be packaged and preserved in strict compliance with MIL-STD-2073-1E and marked according to MIL-STD-129, using unit packaging code D3 and intermediate container E5, with no cushioning or preservation materials required. Palletization must adhere to DLA Packaging Requirements for Procurement, and all shipments must include proper barcoding and labeling as mandated, with no special markings beyond standard requirements. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lamps, instrument sensors, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. The contract incorporates numerous Federal Acquisition Regulation and Defense Federal Acquisition Regulation Supplement clauses governing compliance in cybersecurity, labor standards, hazardous materials, and procurement integrity. Key clauses include 252.204-7012 for safeguarding covered defense information and cyber incident reporting, 252.223-7006 and 252.223-7008 prohibiting toxic materials and hexavalent chromium, 252.222-50 for combating human trafficking, and 252.203-7002 on whistleblower rights. Inspection and acceptance occur at the destination by government personnel, with failure to meet technical and quality requirements tied to the DLA Master List of Technical and Quality Requirements. Pricing is fixed at $5.00 per unit, totaling $25.00, with zero variance allowed on quantity, and payment must be processed electronically through Wide Area WorkFlow using accepted invoice and receiving report document types. Offerors must be registered in SAM, provide a valid Unique Entity ID, and affirm their small business status if applicable, with socioeconomic preferences potentially
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334112
New
DIBBS
DISK DRIVE UNIT
Solicitation # SPE8EN-26-Q-0066
The contract involves the procurement of 43 disk drive units with NSN 7025-01-681-7922 under solicitation SPE8EN-26-Q-0066, issued by the Department of Defense through the Defense Logistics Agency. Delivery is required within 90 days of award, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Packaging must conform to DLA-specific standards, and non-accepted supplies must have all government identification removed prior to return. The item includes technical data subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA training on handling export-controlled technical data, and formal approval by the DLA authority. The place of performance is New Cumberland, Pennsylvania, with Kirk Borowski as the primary point of contact, and responses are due by August 15, 2026.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334112
New
DIBBS
COMPUTER SYSTEM, DIGITA
Solicitation # SPE8EN-26-T-2764
The contract under solicitation SPE8EN-26-T-2764 pertains to the procurement of a computer system, digital touchscreen, with the NSN 7010017259011, requiring one unit under CLIN 0001 and two units under CLIN 0002, for a total quantity of three units. All items must be delivered within five days of the ship date, FOB origin, with no quantity variance permitted, and are subject to inspection and acceptance at the destination. Packaging must comply with ASTM D3951 as baseline, but all DLA Master List of Technical and Quality Requirements supersede this standard, and all items must be marked and labeled per MIL-STD-129 with palletization following RP001 packaging guidelines. Mercury and mercury-containing compounds are strictly prohibited from contact with the hardware except for specific functional applications such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA, with portable devices requiring shockproof construction and secondary containment as per NAVSEA 5100-003D. The delivery destination is RAAF Base Edinburgh, Australia, via DHL Global Forwarding, and transportation protocols reference DLAD PROC NOTES C19 and C20. The contract prohibits submission of technical data package requests to DLA Troop Support due to lack of an approved package, and the supplier must reference approved part numbers: Northrop Grumman Systems Corporation P/N 301-C20750-1 and Teguar Corporation P/Ns TM-5040-19 and TP-5040-19B. The original required delivery date is July 31, 2026, and the contract incorporates all applicable DLA technical and quality requirements identified by R or I numbers, with compliance controls based on the revision in effect on the solicitation issue date.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334112
New
DIBBS
CARTRIDGE, PROGRAMMA
Solicitation # SPE8EN-26-T-2643
This contract is for the procurement of 53 units of a programmable cartridge with NSN 7045-01-519-5103 and part number SSD-P02GI-3068 from Western Digital Corp and ATV-8GB-TSI-3524-A from FMJ Storage Inc, at a unit price of $53.00, for a total value of $2,809.00. Delivery is required to the DLA Distribution DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with FOB Origin terms and a 44-day delivery timeline from the order date, with an original required delivery date of November 5, 2026, and a need ship date of September 17, 2026. The contract specifies strict packaging and marking requirements in accordance with MIL-STD-2073-1E and MIL-STD-129, including dry preservation methods, D3 unit and intermediate containers, and the use of the Pack Code U without special marking. The item must not contain intentional mercury or mercury compounds except in specified exempted applications such as functional batteries, fluorescent lights, sensors, weapon systems, or approved chemical reagents, and portable mercury-containing devices must have shock-proof design and a secondary containment barrier as per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List referenced online, and the contract incorporates multiple FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, cybersecurity safeguards, subcontracting, inspection, default, and export control. Compliance with NIST SP 800-171 for safeguarding covered defense information is required, along with electronic invoicing through Wide Area WorkFlow, use of the DoD Activity Address Code on DD Form 1155, and adherence to the System for Award Management. Subcontracting procedures follow DFARS guidelines for commercial products, and the contractor must comply with prohibitions on hexavalent chromium, covered defense telecommunications equipment, and mandatory arbitration. The item is subject to zero percent quantity variance, and the inspection and acceptance point is at destination. Offerors must submit proposals through the DLA Internet Bid Board System by the August 6, 2026 deadline and provide current UEI and CAGE codes, along with accurate size and socioeconomic status representations as required.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334112
New
DIBBS
INTERFACE UNIT, AUTO
Solicitation # SPE8EN-26-T-2677
The contract solicitation SPE8EN-26-T-2677 seeks the procurement of 205 units of an Interface Unit, Auto with NSN 7025-01-586-9193, to be delivered within 104 days ADO to the DLA Distribution San Joaquin facility in Tracy, CA, under FOB Origin terms. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, superseding other standards where applicable, and packaging must adhere to ASTM D3951 and RP001 DLA Packaging Requirements, with marking following MIL-STD-129. All shipments must ensure hazardous materials are labeled per 29 CFR 1910.1200 and Clause 252.223-7001, and mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Invoicing must be completed electronically via Wide Area WorkFlow (WAWF) using approved document types, and contractors must be registered in the system. The contract includes FAR and DFARS clauses addressing small business representation, employment eligibility, trafficking in persons, cybersecurity safeguarding with a waiver for certain terms, hazardous material identification, transportation by sea, and unenforceable obligations. The offeror must provide a valid UEI and CAGE code if supplying covered defense telecommunications equipment and must declare size status and socioeconomic certifications, including potential HUBZone, SDVOSB, or WOSB status, with joint venture partners disclosed if applicable. No pricing is provided in the solicitation; vendors must submit competitive prices. Proposals must be submitted electronically via DIBBS by August 3, 2026, and inspection and acceptance will occur at the destination per FAR 52.246-1. The Government retains responsibility for inspection and acceptance, and payment details, accounting codes, and contracting officer information will be finalized upon award.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334112
New
DIBBS
DISPLAY UNIT
Solicitation # SPE8EN-26-T-2765
The contract pertains to the procurement of a DISPLAY UNIT with NSN 7025-01-690-7742 and part number 593-8729156 ASSY 99, governed by technical and quality requirements referenced from the DLA Master List, with compliance tied to revisions in effect on the solicitation or award date. Strict packaging standards under MIL-STD-2073-1E and MIL-STD-129 apply, requiring specific methods for preservation, wrapping, containment, and marking, with no special marking codes and palletization aligned with DLA packaging rules. Mercury and mercury-containing compounds are prohibited unless functionally essential in batteries, lighting, instruments, sensors, weapon systems, or approved chemical reagents, with portable fluorescent lamps and instruments containing mercury needing shockproof design and secondary containment per NAVSEA 5100-003D. Two delivery line items are specified, each for one unit, with delivery due in five days FOB origin to designated military facilities—USS BAINBRIDGE DDG 96 in FPO AE and NAVY STATION NORFOLK AIR TERMINAL—with inspection and acceptance occurring at the destination. Shipment must use traceable freight methods, excluding parcel post, and must adhere to DLA transport procedures. Pricing is fixed at $1.00 per unit, with zero variance allowed in quantity, and delivery deadlines are set for July 30 and 31, 2026, respectively. The contract is issued under solicitation SPE8EN-26-T-2765, with procurement governed by DoD unit of issue standards and technical specifications referenced from official DLA documentation.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334112
New
DIBBS
STYLUS, DATA ENTRY
Solicitation # SPE8EN-26-T-2664
The contract involves the procurement of 8 units of STYLUS, DATA ENTRY with NSN 7025-01-717-5029, under solicitation SPE8EN-26-T-2664, issued by the Defense Logistics Agency. Delivery is required at the DLA Distribution New Cumberland Facility in Pennsylvania with an FOB Origin term and a delivery window of 167 days from the order date, originally due by November 20, 2026, with a need ship date of January 18, 2027. The total contract value is listed as $8.000, though the unit price of $0.000 is inconsistent and likely erroneous. Packaging must adhere to ASTM D3951 and be palletized according to DLA Packaging Requirements for Procurement (RP001), with all items marked and labeled in compliance with MIL-STD-129. Technical and quality requirements referenced by R or I numbers take precedence over ASTM standards and are sourced from the DLA Master List. Mercury or mercury-containing compounds are prohibited unless used functionally in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable mercury-containing devices must be shock-proof with secondary containment as per NAVSEA 5100-003D. Inspection and acceptance occur at the destination, and delivery must be accompanied by all required documentation including safety data sheets and hazard warnings under 29 CFR 1910.1200. Electronic invoicing is mandatory via WAWF, and adherence to FAR and DFARS clauses is required, including those on trafficking in persons, employment verification, sustainable products, hazardous material identification, cyber security assessments per NIST SP 800-171, and export controls. The contract mandates representation of size status and socioeconomic categories, with applicable preferences for small business, HUBZone, SDVOSB, WOSB, and EDWOSB entities. The offeror must also provide a UEI and CAGE code, comply with prohibitions on forced arbitration and internal confidentiality agreements, and avoid use of certain Chinese military company products or hexavalent chromium. All submissions must be made via the DIBBS portal by August 3, 2026, and include compliance with all specified regulations, including proper labeling of hazardous materials and reporting for any equipment covered under defense telecommunications restrictions.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334112
New
SLED
IWQ 135155 Purchase of Video Shared Storage Solution
Solicitation # IWQ 135155
Gwinnett County Government in Georgia is seeking proposals for the purchase of a video shared storage solution under solicitation number PE-77023-NONST-2027-000000692, which was posted on August 3, 2026, with a response deadline of August 10, 2026, at 7:50 PM. This solicitation is categorized under the SLED government type and aims to acquire a system capable of securely storing and managing video data across multiple platforms or departments. The place of performance is located within the state of Georgia, and the contract does not specify a set-aside type or NAICS code. Blake Christopher of Gwinnett County Government is the primary point of contact, reachable at 770-822-8820 or via email at blake.christopher@gwinnettcounty.com for any inquiries or additional details regarding the requirements or submission process. Prospective bidders are directed to the official UI link for full access to solicitation documents and submission guidelines.
Gwinnett County Government

POSTED

about 21 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334112
New
Federal
COMPUTER EQUIPMENT
Solicitation # N0016426Q0241
The Naval Surface Warfare Center Crane is soliciting two Dell PowerEdge R760 servers, one Dell PowerVault MD2412 storage array, two APC Smart-UPS power supplies, and one Quantum tape drive under a Small Business Set-Aside with a Firm-Fixed-Price contract, using Brand Name or Equal procurement procedures as authorized by FAR 19.502-2(c). The solicitation number is N0016426Q0241, issued under FAR 12 using simplified acquisition procedures, and responses must be submitted electronically to Alicia Dobbyn at Alicia.a.dobbyn.civ@us.navy.mil by 4:00 PM Eastern Time on August 7, 2026, following an amendment that extended the original July 30, 2026 deadline. All offerors must be currently registered in the System for Award Management (SAM) and must submit complete documentation including the signed base solicitation, signed amendment, completed evaluation criteria, technical evaluation matrix, letter of supply, and product literature for any “Equal” alternatives to be considered responsive. Delivery is FOB Destination to NSWC Crane, 300 Highway 361, Crane, IN 47522-5001, with a required delivery date of October 26, 2026. Compliance with MIL-STD-130 and MIL-STD-129 is mandatory for Unique Item Identification and shipment labeling, requiring two-dimensional Data Matrix symbols compliant with ISO/IEC 16022 and encoded with enterprise identifier and serial number data per ISO/IEC 15434. Technical acceptability is assessed through a GO/NO GO evaluation based on conformance to specifications, on-time delivery, and past performance using Supplier Performance Risk System (SPRS) ratings—any Yellow or Red risk status results in rejection. Pricing is evaluated solely after technical acceptability, with award going to the lowest-priced technically acceptable offer under a Low Price Technically Acceptable (LPTA) method. Electronic invoicing via Wide Area WorkFlow (WAWF) is required, and the contract incorporates critical DFARS clauses including 252.204-7012 (cybersecurity safeguarding of Covered Defense Information), 252.204-7018 (prohibition on certain telecommunications equipment), and 252.22
Nswc Crane

POSTED

about 23 hours ago

DEADLINE

in 3 days
View Details
NAICS: 334112
New
DIBBS
Supply and Delivery of Display Units (NSN 7025013094130)The contract requires the procurement, packaging, and delivery of 21 units of a specific electronic display identified by NSN 7025013094130 to a government-designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All activities must fully comply with federal regulations governing packaging, labeling, and the handling of hazardous materials to ensure safe and lawful transport and receipt. The item is classified under NAICS code 334112, indicating its origin in the manufacturing of electronic computer and peripheral equipment. The contract is structured as a subcontract with no set-aside preferences specified, and it was posted on August 2, 2026, with responses due by August 13, 2026. Delivery must be completed by the deadline, and the contract is managed under the Department of Defense through the Construction & Equipment T & IFO EQ office, with the solicitation referenced as SPE8EN26T2759.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334112
New
DIBBS
Supply of Ericsson Enterprise Wireless Solutions Processor, GatewayThe contract requires the supply of one unit of a specified Processor, Gateway with NSN 7025-01-730-6400, manufactured by Ericsson Enterprise Wireless Solutions under part number TAA-MB05-19005GB-GA or an equivalent CUBIC model, ensuring full compliance with all technical, packaging, and labeling specifications. The item must meet stringent defense requirements and be sourced in accordance with Trade Agreements Act standards. The solicitation is issued as a subcontract under the NAICS code 334112, which classifies it within the Semiconductor and Related Device Manufacturing sector, and the performance location is designated as Fort Bragg with a zip code of 28310. The opportunity was posted on August 2, 2026, with responses due by August 13, 2026, and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ organization.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 9 days
View Details
NAICS: 334112
New
DIBBS
Supply of Interface Units for Automatic Data ProcessingThe contract requires the procurement and delivery of two Interface Units for Automatic Data Processing, identified by NSN 7025-12-404-1390, to be fully compliant with Department of Defense technical standards, including MIL-STD-129 and MIL-STD-2073-1E for labeling, packaging, and preservation. These units must meet all applicable military specifications to ensure compatibility and operational readiness within defense systems. The solicitation is issued as a subcontract under NAICS code 334112 and is managed by the Department of Defense through its Construction & Equipment T & IFO EQ office, with performance located at FPO 09583. The opportunity was posted on August 2, 2026, and responses are due by August 13, 2026, with no set-aside classification specified. All deliverables must adhere strictly to the required packaging and labeling protocols to ensure proper handling and logistics integrity throughout the supply chain.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT T & IFO EQ

Same awarding agency

NAICS: 334419
New
DIBBS
Display Unit SupplyThe contract involves the supply of two commercial off-the-shelf display units that meet military specifications for packaging and labeling, intended for defense use under NSN 7017722058. These units are to be delivered to a military installation with a place of performance listed as FPO, ZIP 09565, indicating overseas or naval deployment support. The solicitation is classified as a subcontract under NAICS code 334419, which covers other electronic component manufacturing, and is managed by the Department of Defense through the Construction & Equipment T & IFO EQ office. Bidders must submit responses by August 14, 2026, with the opportunity posted on August 3, 2026, through the DIBBS platform for procurement transparency. Compliance with military packaging and labeling standards is mandatory, ensuring the units are suitable for field operations under harsh conditions typical of defense environments.
Other Electronic Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
BOX, DOCUMENT
Solicitation # SPE8EN-26-T-2635
The contract solicitates 16 units of BOX, DOCUMENT and BOX, ACCESSORIES STOWAGE under NSN 2540015759648 with a 56-day delivery timeline after order placement, meeting a firm delivery requirement by March 30, 2027. Deliveries are to be made FOB ORIGIN to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. Packaging must comply with the DLA Master List of Technical and Quality Requirements, which supersedes all other standards including ASTM D3951 for non-hazardous items and TQ Requirement IP025 for hazardous materials as defined by FED-STD-313. All packaging and labeling must adhere to MIL-STD-129, including barcoding, unit of issue, and quantity per unit pack specifications, with palletization following RP001 standards. The item is not classified as hazardous under FED-STD-313 and must be commercially packaged unless otherwise specified in the DLA Master List, which governs all technical and quality criteria referenced by R-numbers such as RA001, RC001, RD003, and RQ011, covering documentation, covered defense information handling, and removal of government identification. The contract mandates compliance with FAR clauses including 52.223-3 for hazardous material identification and safety data submission, 252.204-7012 for safeguarding covered defense information, 252.223-7008 for hexavalent chromium prohibition, and 252.225-7007 restricting procurement from Communist Chinese military companies. Contractors must submit Safety Data Sheets prior to award, comply with hazard communication standards under 29 CFR 1910.1200, and flow down applicable clauses to subcontracts over the simplified acquisition threshold. Invoicing must be processed electronically via WAWF, and the contractor must represent its small business status, UEI, and CAGE code in alignment with SAM.gov registrations. The solicitation does not include pricing details, contract type, or evaluation factors, and no formal attachments are listed, with all requirements incorporated by reference from external DLA sources. All proposals must be submitted electronically via DIBBS by August 6, 2026, under solicitation SPE8EN-26-T
Other Motor Vehicle Parts Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
RING, SECURITY
Solicitation # SPE8EN-26-T-2766
The contract pertains to the procurement of four security rings, identified by NSN 3615-01-447-0047 and part number 593-6960319, under solicitation SPE8EN-26-T-2766, issued by the Department of Defense through DLA. The items must be manufactured and delivered in full compliance with technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129, with no special marking required. Sampling for inspection shall follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances accepted unless otherwise specified, and attributes are to be classified with verification levels or AQLs as defined. The delivery must occur FOB origin with a lead time of 156 days, targeting a required delivery date of February 25, 2027, and the units must be shipped to the DLA distribution facility in New Cumberland, Pennsylvania. Packaging must adhere to DLA packaging requirements, including palletization and container specifications, and the unit of issue is each (EA), with no quantity variance permitted. The seller must comply with all applicable defense information handling protocols, and the item drawing is available only during the open solicitation period via the DIBBS portal. The contract includes specific logistical directives, including freight shipping to the same destination as the parcel post address, and references transportation procedures outlined in DLAD Proc Notes C19 and C20. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, and the purchasing request number is 7017585333. The technical data package revision H, dated March 22, 2000, governs the item’s design and manufacturing criteria. All supplies must meet DLA’s standards for government property handling, including the removal of government identification from non-accepted items. The point of contact for the solicitation is Jennifer Esworthy, and all documentation must align with authorized DoD unit of issue standards referenced through the provided link. The NAICS code 332999 applies, and the contract is classified as a federal acquisition with no set-aside designation.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334118
New
DIBBS
COMPUTER SUBASSEMBL
Solicitation # SPE8EN-26-T-2666
The contract pertains to the procurement of four units of a COMPUTER SUBASSEMBL with NSN 7050016942565 under solicitation SPE8EN-26-T-2666, issued by the Defense Logistics Agency under the Department of Defense. Delivery is required FOB origin to the designated receipt warehouse in Tracy, California, with a delivery window of 167 days from the solicitation date, and the original required delivery date is October 16, 2026. The unit of issue is each (EA), with no variance allowed in quantity. Packaging must fully comply with MIL-STD-2073-1E, including specific preservation, wrapping, and containment methods, while marking adheres strictly to MIL-STD-129 with no special markings required. Palletization must meet DLA Packaging Requirements for Procurement (RP001). Mercury or mercury-containing compounds are strictly prohibited in or on the hardware except for specified functional uses in batteries, lighting, instruments, sensors, weapon systems, or NAVSEA-approved chemical reagents; portable devices containing mercury must be shockproof and include a secondary containment boundary as defined by NAVSEA 5100-003D. The contract includes extensive compliance obligations tied to cybersecurity, hazardous materials, and ethical procurement. It mandates adherence to NIST SP 800-171 for safeguarding controlled unclassified information, requires compliance with the DFARS clause 252.204-7012 for cyber incident reporting, and prohibits the use of covered telecommunications equipment from restricted vendors. Hazardous materials must be labeled under OSHA’s Hazard Communication Standard with accompanying Safety Data Sheets. Sustainability requirements mandate the use of environmentally preferable products. Contractor personnel must be informed of whistleblower rights, and representations regarding small business status, UEI, and CAGE codes are required. All invoicing must be submitted electronically via Wide Area WorkFlow, and payment is subject to accelerated disbursement terms for small business subcontractors. The contract applies deviations for multiple FAR and DFARS clauses, including those governing equal opportunity, employment eligibility verification, trafficking in persons, and unenforceable obligations. The clause 52.216-1 Alternate I confirms a fixed-price contract type. Inspection and acceptance occur at the destination, and the contract includes provisions to prevent unauthorized obligations and ensure proper accounting oversight. The solicitation closed on August 6, 2026, and
Computer Terminal and Other Computer Peripheral Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334210
New
DIBBS
TELEPHONE
Solicitation # SPE8EN-26-T-2679
The contract under solicitation number SPE8EN-26-T-2679 is a fixed-price procurement for seven telephones identified by NSN 5805-01-691-1084, with delivery required within 167 days of award, targeting a need ship date of January 18, 2027, and an original required delivery date of December 6, 2026. Delivery is FOB origin, with all items destined for receipt at the Defense Logistics Agency warehouse in Tracy, California, and inspection and acceptance will occur at the destination. The contract incorporates strict packaging and labeling standards, mandating compliance with ASTM D3951, MIL-STD-129 for marking and barcoding, and RP001 DLA Packaging Requirements for Procurement, with palletization and unit of issue specifications strictly defined. All technical and quality requirements referenced by R or I numbers from the DLA Master List take precedence over ASTM standards. The item must not contain intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Compliance with multiple federal regulation clauses is integral, including safeguarding covered defense information under 252.204-7012, cyber incident reporting obligations, and adherence to hazardous material handling standards under 29 CFR 1910.1200 and 52.223-3, which require submission of Safety Data Sheets prior to award. The contract prohibits the use of covered defense telecommunications equipment from Chinese military companies under 252.204-7018 and requires exclusion of hexavalent chromium and restricted toxic substances. Transportation must comply with U.S.-flag vessel requirements under 10 U.S.C. § 2631 if ocean shipping is involved. Contractors must maintain and report current Small Business status and socioeconomic designations in SAM, affirm compliance with employment eligibility and anti-trafficking provisions, and adhere to whistleblower rights notifications. Invoicing must be conducted via Wide Area WorkFlow, and all delivery documentation must align with DoDAAC and payment office specifications. The solicitation requires electronic submission via the DIBBS portal, with offers due by August 6, 2026
Telephone Apparatus Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details