This Government Contract opportunity from Department Of Defense was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Disposable Medical Applicator Manufacturing

Closed

Federal

Submission Closed07/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113

New

DIBBS

IMPLANT, MESH, SURGICAL

Solicitation # SPE2DS-26-T-371M

This contract is for the procurement of one package of sterile, absorbable surgical implant mesh made of woven polyglactin 910, measuring 12 by 12 inches. Each package contains three individual units. The product must have a total shelf life of 60 months, and no more than 9 months may have elapsed from the date of manufacture to the date of delivery to the government. The solicitation is issued by the Department of Defense Medical Supply Chain and requires delivery within 20 days after receipt of the order. Bidders must specify the source and part number being supplied and adhere to DLA packaging requirements and technical quality standards. The place of performance is located in Pascagoula, Mississippi.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-370P

This solicitation is for the procurement of ten black pelvic binders designed for emergency pelvic stabilization. These one-size-fits-all devices are intended for single-use, temporary stabilization over a 24 to 48 hour period to protect pelvic hematomas and provide pain relief. The items must be cut to fit each individual patient and are issued as individual units. The contract requires adherence to DLA technical and quality standards, including specific packaging and marking requirements according to Medical Marking Standard No. 1. Supplies must be delivered in sealed unit containers within suitable commercial shipping containers to ensure safe delivery to Fort Bliss. Bidders are required to specify the source and part number being supplied, with a delivery timeline of 20 days after the order is placed.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DH-26-T-6228

This contract is for the procurement of two Warrior Evacuation Litter Pads (WELP) for the Department of Defense Medical Supply Chain. These black mattress pads measure 72 by 23 by 2 inches and weigh 10.5 pounds. They are engineered for high-altitude aviation use, meeting U.S. Air Force Air Mobility Command standards and Federal Aviation Regulations for flammability. The pads feature a non-reflective, conductive surface with fluid-impermeable materials and pressure relief vents designed to maximize patient pressure management and reduce shear injuries. The solicitation, identified as SPE2DH-26-T-6228, requires delivery within five days after receipt of order to San Antonio, Texas. Bidders must provide the source and part number for the items supplied. The contract adheres to DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies, and specifies that the item is not regulated by the FDA.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-371T

This solicitation from the Department of Defense Medical Supply Chain for general surgical knives involves the procurement of one package containing ten disposable, retractable surgical knife handles compatible with number 15 blades. The devices are designed for ambidextrous use with top-mounted activation and are restricted to cold sterilization only. The contract requires adherence to DLA master technical and quality requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. Bidders must provide the source and part number for NSN 6515-01-668-5279, with a required delivery timeframe of 20 days after receipt of order.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-367R

This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of sterile, disposable oral airways. The specific requirement is for size 00 newborn airways, measuring 40mm in length, featuring a soft reinforced bite block, kink-resistant material, and millimeter size engravings on the flange. These latex-free devices are to be supplied in packages of 10 units each. The contract requires the delivery of one package to Davis Monthan AFB within 20 days after the order is placed. Bidders must specify the source and part number being supplied and adhere to DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies. The solicitation is listed under NAICS code 339113 with a response deadline of August 31, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-366M

This contract is for the procurement of 12 packages of sterile burn dressings, specifically 24 by 36 inch absorbent cotton gauze with a 3 mil color-free polyethylene backing. Each unit of issue consists of 15 dressings per package. The items must be delivered to Fort Wainwright within 20 days after the order is placed. The dressings must have a non-extendable shelf life of 36 months, with no more than 5 months having elapsed from the date of manufacture to the date of delivery to the government. All packaging must be individually sealed and labeled with the manufacturer date, expiration or retest date, and the contract or lot number in accordance with MMS1A standards. Bidders are required to specify the source and part number being supplied.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

WOUND CLOSURE KIT, FACI

Solicitation # SPE2DS-26-T-371L

This solicitation is for the procurement of four boxes of sterile, disposable facial wound closure kits under solicitation number SPE2DS-26-T-371L for the Department of Defense. Each kit consists of 14 specific components, including a fenestrated drape, alcohol and povidone-iodine swabs, cotton-filled sponges, and surgical instruments such as tissue forceps, fine-point scissors, a Webster needle holder, and a curved mosquito hemostat. The contract requires adherence to DLA packaging and quality standards, specifically referencing RP001 and RA001. Bidders must provide the source and part number for the supplies provided. The delivery deadline is 20 days after the order is placed, with the place of performance located at Fort Wainwright, Alaska.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

PARTS KIT, REGULATOR BR

Solicitation # SPE7M4-26-T-365A

Solicitation SPE7M4-26-T-365A is a federal request from the Department of Defense Fluid Handling Division for 137 units of a regulator parts kit, identified by NSN 4240-01-439-1355. The delivery requirement is set for 364 days after order, with a response deadline of September 8, 2026. Offerors are encouraged to provide quantity ranges to accommodate potential changes in demand and must disclose any non-domestic materials to comply with the Berry Amendment and Buy American Act. The contract prohibits the use of covered telecommunications equipment and restricts the use of additive manufacturing unless specifically authorized. All contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additionally, small business joint ventures must provide specific representations and certifications regarding their business status. Support for eligible businesses is available through APEX Accelerators.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE2DH-26-T-6239

This contract is a solicitation from the Department of Defense Medical Supply Chain for the procurement of two cases of large, single-use instant heat treatment pads. These pads are designed to reach 112 degrees Fahrenheit when activated at a room temperature of 75 degrees Fahrenheit. Each case contains 24 units, and the items must be delivered within 20 days after the order is placed to the performance location at Fort Bragg. The supplies must adhere to specific DLA technical, quality, and packaging requirements, including the removal of government identification from non-accepted supplies. The heat pads must have a total shelf life of 24 months, with no more than 3 months elapsed from the date of manufacture to the date of delivery. All labeling must include the manufacturer date, expiration or retest date, and the contract or lot number in accordance with MMS1A standards.

MEDICAL SUPPLY CHAIIN FSH

POSTED

DEADLINE

Solicitation # SPE2DS-26-T-371N

This contract is for the procurement of three units of open netted elastic bandages, each measuring 25 yards. These bandages are composed of rubber, nylon, and polyester and are designed to hold wet or dry dressings in place on the head, cranium, ears, face, neck, and child's chest. The items are issued individually and must be delivered within five days after receipt of the order. The supplier must adhere to commercial packaging and packing standards, ensuring each unit is in a sealed container to prevent damage. All materials must be marked according to Medical Marking Standard No. 1. This solicitation, issued by the Department of Defense Medical Supply Chain, is governed by DLA technical and quality requirements and specifies a place of performance in FPO 34087.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

SPECTACLES, INDUSTRIAL

Solicitation # SPE8E5-26-T-4061

This contract, identified as SPE8E5-26-T-4061, is a solicitation by the Defense Logistics Agency for the procurement of 20 units of industrial spectacles, identified by NSN 4240-01-729-1700. The order is issued to Fast Metal LLC under purchase request 7017995852, with a required delivery date of August 27, 2026, and a delivery window of 20 days. The terms specify FOB Origin with inspection and acceptance occurring at the destination. The shipment is destined for the CS BN CO A Distribution center at Fort Carson, Colorado. Compliance with several technical and quality standards is required, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements RP001. Additionally, the contract incorporates specific quality requirements RA001, RQ011 regarding the removal of government identification from non-accepted supplies, and RD003 concerning covered defense information.

Defense Logistics Agency

POSTED

DEADLINE

HANDLE, WEBBING, RESCUE

Solicitation # SPE2DH-26-T-6221

This contract is for the procurement of webbing handles used in rescue and transport systems, specifically identified as replacement handles for the basic patient rescue and transport system. The requirement is for one package containing four handles, referencing Skedco Inc part number SK-205 and NSN 6530-01-260-1214. The item is explicitly noted as not being an FDA regulated device. The supplier must adhere to DLA packaging requirements and Medical Marking Standard No. 1 for all labeling and shipping. Delivery is required within 20 days after the order, with the destination serving as the point for both inspection and acceptance. The contract is issued by the Department of Defense Medical Supply Chain and specifies that the bidder must clearly identify the company and part number being supplied.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 5 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract requires the manufacture of disposable medical applicators with precise dimensional and material specifications, each pre-saturated with povidone-iodine and compliant with medical-grade and sterility standards. These applicators must meet rigorous quality controls to ensure safety and efficacy in clinical settings, with production adhering to the NAICS code 339113 for medical equipment and supplies manufacturing. All items are to be delivered to Joint Base Charleston, SC, with a response deadline of July 22, 2026, and the solicitation is classified as a subcontract under the Department of Defense’s Medical Supply Chain division. The procurement is part of the Defense Logistics Agency’s efforts to secure essential surgical and antiseptic supplies for military medical operations, with no set-aside designation specified and no point of contact provided in the published details.

General Info

Manufacture sterile povidone-iodine applicators per medical specs for Joint Base Charleston, delivery by July 22, 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

JOINT BASE CHARLESTON, SC, 29404, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-26-T-245M.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

APPLICATOR, DISPOSABLE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedJul 16

subcontract

Response DeadlineJul 22

Deadline has passed

Submission Closed

07/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture disposable medical applicators with specified dimensions and materials, pre-saturated with povidone-iodine, meeting sterility and medical-grade standards.