Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DISPOSAL CONTAINER,

Active
SPE2DH-26-T-5809Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of two disposal containers designed for the safe disposal of hypodermic needles and syringes, with each container measuring between 6 to 7 inches in length and 1 to 2 inches in diameter. The containers must feature a securable cap and a lift-off cover to ensure safe handling and prevent accidental exposure. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date or award date depending on the acquisition type. Packaging must comply with DLA’s procurement standards, and non-accepted supplies must have all government identification removed prior to return. The item is associated with NSN 6530-01-645-6923 and is subject to potential coverage under provisions for controlled defense information. The solicitation, issued under SPE2DH-26-T-5809, was posted on August 5, 2026, with responses due by August 12, 2026. The contracting activity falls under the Department of Defense’s Medical Supply Chain FSH, with performance required at Fort Bragg, North Carolina, 28310. The point of contact is Tina Vu, reachable via email and phone. The purchase request number is 7017739033, requesting a total quantity of 40 units, with delivery mandated within 20 days after award.

General Info

Procure 40 secure needle disposal containers, 6–7 inches long, 1–2 inches diameter, delivery in 20 days to Fort Bragg.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

BLD A5474 PRATT ST, FORT BRAGG, NC, 28310, US

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5809.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUS
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DISPOSAL CONTAINER,
DISPOSAL CONTAINER
HYPODERMIC NEEDLE AND SYRINGE SHARPS TUBE CONTAINER; FOR DISPOSAL OF
NEEDLES OR SYRINGES; LENGTH 6 TO 7 INCHES; DIAMETER 1 TO 2 INCHES;
SECURABLE CAP; LIFT-OFF COVER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-645-6923 Quantity: 2 EA Purchase Request: 7017739033QTY: 40 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339113
New
DIBBS
CARRIER ASSEMBLY
Solicitation # SPE8E9-26-Q-0643
The contract awards 202 units of the Carrier Assembly, Protective Mask, identified by NSN 4240-01-224-4196, under solicitation SPE8E9-26-Q-0643, with a firm fixed price and no variance allowed in quantity. Delivery is required within 60 days after contract award, with freight shipped from origin and acceptance occurring at destination. Packaging must comply strictly with MIL-STD-2073-1E and DLA Packaging Requirements, using specified methods for preservation, wrapping, and containment, while avoiding plastic materials whenever possible. Marking must adhere to MIL-STD-129 with no special coding required. Mercury and mercury-containing compounds are prohibited unless explicitly exempted for functional components like batteries or sensors, and any exempted items must meet NavSea 5100-003D standards for shock resistance and secondary containment. The item is destined for DLA Distribution at the New Cumberland facility, with transportation governed by DLAD procedural notes. The supply is critical to a Department of Defense requirement with a material need date of May 19, 2028, and technical and quality standards referenced from the DLA Master List of Requirements in effect on the solicitation issue date.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
GLOVE, PATIENT EXAMININ
Solicitation # SPE2DS-26-T-311L
The contract specifies the procurement of 10 packages, each containing 100 black, latex-free, powder-free nitrile exam gloves designed for special-forces operations. Each glove is large size, ambidextrous, non-sterile, and features a beaded cuff with a micro-roughened finish to enhance grip. The gloves have a palm thickness of 0.16 plus 0.03 millimeters, a palm weight exceeding 105 millimeters, and a length of 240 millimeters, classified as heavy-gauge for durability in demanding environments. The unit of issue is a package of 100 gloves, and the total quantity requested is 10 packages. Compliance with DLA packaging requirements and technical specifications referenced in the DLA Master List of Technical and Quality Requirements is mandatory, with the applicable revision determined by the solicitation or award date. The government identification on non-accepted supplies must be removed per RQ011. The NSN is 6515-01-515-0197, associated with purchase request 7017754214, and delivery is required within five days of award. The solicitation, identified as SPE2DS-26-T-311L, was posted on August 5, 2026, with responses due by August 11, 2026, under NAICS code 339113 for medical device manufacturing. Performance is required at Fort Bragg, North Carolina, with primary point of contact Aidan Martz at the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SUPPORT, ARCH
Solicitation # SPE2DS-26-T-311E
This contract solicits a pair of full-length corrective arch support devices designed for men’s sizes 10–11 and women’s sizes 11–12, to be worn inside shoes. The items are green in color and must meet technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, with revisions controlled based on the solicitation or award date depending on acquisition size. The product is identified by NSN 6515-01-387-2743 and is requested in a quantity of two units, with delivery required within 84 days of award to APO ZIP 09227-0000. Bidders must clearly state the source and part number being supplied and comply with DLA packaging requirements, as well as the provision for removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-311E, issued under NAICS code 339113 by the Department of Defense’s Medical Supply Chain organization, with a response deadline of August 11, 2026, and point of contact Elizabeth Cruz for inquiries. Covered defense information may apply, and all submissions must adhere to the specified acquisition protocols.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
LANYARD, SAFETY, INDUSTR
Solicitation # SPE8E6-26-T-4024
The contract pertains to the procurement of industrial safety lanyards identified by NSN 4240015443384 and part number 10119639, with a total quantity of 264 units split between two delivery lines: 13 units and 251 units. Delivery is required within 43 days of the ship date, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking standards, including palletization per DLA’s RP001 requirements. No mercury or mercury-containing compounds may be intentionally added or come in direct contact with the supply, except for specific exempted components like functional batteries or instruments as defined by NAVSEA, and portable items containing mercury must include a secondary containment and be shock-proof. Packaging for hazardous materials follows IP025 guidelines. Two distinct shipping addresses are specified—one for the New Cumberland, PA facility with a need ship date of June 11, 2027, and another for the San Joaquin, CA facility with a need ship date of September 30, 2026—both tied to the original required delivery date of February 9, 2027. The contract is issued under solicitation SPE8E6-26-T-4024, governed by DLA’s technical and quality requirements referenced from their master list, and the unit of issue is the individual unit (EA), aligned with DoD standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
FACEPIECE, BREATHING
Solicitation # SPE8E9-26-T-3364
The contract pertains to the procurement of 67 facepiece assemblies for breathing applications, identified by NSN 4240-01-567-8181 and purchase request 7017756923, with a unit price of $67.00 and a total contract value of $4,489. Delivery is required within 41 days after award, with shipment FOB origin and inspection and acceptance points at the destination. The supplies must comply with MIL-STD-2073-1E for packaging, including specific preservation methods, unit containerization, and marking per MIL-STD-129, with no special marking required. Packaging and palletization must adhere to DLA’s procurement requirements, and hazardous material handling must conform to IP025 guidelines. Mercury or mercury-containing compounds are strictly prohibited unless expressly exempted for functional uses such as batteries, fluorescent lights, sensors, or Navy-specified reagents, and any exempted portable devices must include shockproof construction and a secondary containment barrier consistent with NAVSEA 5100-003D. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling for this simplified acquisition. The delivery destination is the DLA Distribution Depot in Bremerton, Washington, and the need ship date is September 28, 2026, with an original required delivery date of October 31, 2026. The solicitation number is SPE8E9-26-T-3364, issued under NAICS 339113 by the Department of Defense’s Construction & Equipment MRO Service I, with Matthew Kruc as the primary point of contact.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
FILTER, GAS-PARTICUL
Solicitation # SPE8E9-26-T-3331
The contract specifies the procurement of a gas particulate filter, part number 461918, manufactured by Mine Safety Appliances Company DBA Safety Products Division, with the NSN 4240-01-311-2646. A total of 47 units are required at a unit price of $47.00, with delivery due within 167 days of the original required delivery date of March 20, 2027. The items must be shipped FOB origin with zero variance in quantity, inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with specific packaging codes and instructions to avoid plastic wrapping, cushioning, or dunnage where possible. The filter is designated as a critical application item, and the contract incorporates technical and quality requirements from the DLA Master List, including restrictions on mercury and mercury-containing compounds, except for approved functional uses such as batteries, fluorescent lights, and specified instruments, which must include secondary containment per NAVSEA 5100-003D. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation protocols outlined in DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with responses due by August 17, 2026, under contract number SPE8E9-26-T-3331, and is administered by the Department of Defense’s Construction & Equipment MRO Service I.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
FACEPIECE, BREATHING
Solicitation # SPE8E9-26-T-3349
The contract specifies the procurement of 132 facepieces for breathing applications under solicitation SPE8E9-26-T-3349, with a delivery deadline of 67 days after award and a required ship date of October 24, 2026. The item is identified by NSN 4240-01-567-8150 and is to be delivered FOB origin with zero variance in quantity, inspected and accepted at destination. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization follows DLA’s packaging requirements. All supplies must be free from intentional addition of mercury or mercury compounds except for limited functional uses in batteries, lighting, instruments, weapon systems, or NAVSEA-specified reagents, with portable mercury-containing items requiring shockproof design and secondary containment per NAVSEA 5100-003D. Cybersecurity compliance requires CMMC Level 2 self-assessment due to the handling of covered defense information. The item must be shipped to the DLA Distribution facility in New Cumberland, PA, following specific transportation protocols outlined in DLAD PROC NOTES C19 and C20. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced via R-numbered clauses, and the contract is subject to the revision in effect at the time of solicitation issuance.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
HELMET, WELDER'S
Solicitation # SPE8E6-26-T-4057
The contract is for 16 welder’s helmets with NSN 4240-01-684-5776 and part number G5-01 from 3M Company, procured under solicitation SPE8E6-26-T-4057. The unit price is $16.00 per unit, with a total contract value of $256.00, and delivery is required within 29 days from the award date, FOB origin. All items must be delivered to the receiving warehouse in Tracy, California, with inspection and acceptance occurring at destination. The quantity is fixed with no variance allowed. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any commercial standards such as ASTM D3951. Packaging must comply with DLA-specific requirements including MIL-STD-129 labeling, and if the item is not classified as hazardous under FED-STD-313, it must be commercially packaged consistent with ASTM D3951 unless overridden by a DLA requirement. Palletization must adhere to RP001, and all packaging must be marked accordingly. The item is subject to potential Covered Defense Information requirements under RD003, and government identification must be removed from any non-accepted supplies per RQ011. The contract references specific technical documents and packaging protocols, with transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026, and the original required delivery date is October 9, 2026, though a ship date of September 16, 2026, is expected. The acquiring office is DLA District San Joaquin under the Department of Defense, with John Lieb as the primary point of contact.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
BAG, RESCUE EQUIPMEN
Solicitation # SPE8E6-26-T-4039
The contract pertains to the procurement of 182 units of a rescue equipment bag identified by NSN 4240-01-580-0164 under solicitation SPE8E6-26-T-4039, with a total contract value of $33,124 at a unit price of $182. Delivery is required within 66 days from the contract award, with FOB origin terms and no variance allowed in quantity. All items must comply with MIL-STD-2073-1E packaging standards, marked in accordance with MIL-STD-129, and palletized following DLA’s packaging requirements. The goods are to be delivered to DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with an original required delivery date of October 12, 2026, and a needed ship date of October 23, 2026. The equipment must not contain intentional mercury or mercury compounds except as specifically permitted for functional components like batteries, lights, sensors, or weapons systems, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Hazardous material packaging and shipping must adhere to IP025 guidelines, and transportation logistics follow DLAD Proc Notes C19 and C20. The contract is issued under the DoD authorized unit of issue and is subject to applicable defense information protection protocols.
SAN DIEGO

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 339113
New
DIBBS
GLOVES, NITRILE
Solicitation # SPE2DS-26-T-311P
The contract is for the procurement of 1 box of 100 disposable nitrile gloves, size medium, in sand color, with a NSN of 8415-01-600-6057. The gloves are latex-free, powder-free, non-sterile, and ambidextrous, featuring a textured surface for enhanced grip in both wet and dry conditions, an extended beaded cuff for better fit and protection, and increased thickness and length compared to standard gloves. The unit of issue is a single box containing 100 gloves, and the delivery deadline is 20 days after award. The solicitation is issued by the Department of Defense Medical Supply Chain under the contract number SPE2DS-26-T-311P, with proposals due by August 11, 2026. Bidders must identify the source and part number being supplied and comply with DLA packaging and technical quality requirements as outlined in the DLA Master List of Technical and Quality Requirements. The place of performance is Camp Lejeune, North Carolina, and the primary point of contact is Tiffany Parker, reachable at the provided email and phone number. The NAICS code is 339113, and the procurement is classified as a federal solicitation with no set-aside designation.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 1 hour ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
FACEPIECE, BREATHING
Solicitation # SPE8E9-26-T-3354
The contract pertains to the procurement of 149 units of a facepiece for breathing, identified by NSN 4240-01-564-1617 and purchase request 7017756950, with a unit price of $149.00 and a total contract value of $22,201. Delivery is required within 23 days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and codes, with no special marking required. The items must be palletized in accordance with DLA packaging standards and shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. All supplies are prohibited from containing intentionally added mercury or mercury compounds, except for functional uses in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents; portable items containing mercury must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates technical and quality requirements from the DLA Master List, with revisions controlled based on acquisition type and solicitation amendments. Transportation and shipping instructions reference DLA procedural notes C19 and C20, and the solicitation was issued under contract number SPE8E9-26-T-3354 with a response deadline of August 17, 2026.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 423450
New
DIBBS
BAG, URINAL
Solicitation # SPE2DH-26-T-5810
The contract is for the procurement of 2 packages of urinal bags, each containing 20 absorbent units designed to replace traditional plastic urinals by suppressing cleaning needs while still enabling accurate measurement of diuresis and laboratory analysis. These bags eliminate odors and are regulated by the FDA as a Class I medical device, requiring compliance with registration, listing, labeling, and GMP requirements, even though a 510(k) is not needed. The product must be marked according to the latest edition of the Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129, and packaging must follow DLA’s packaging requirements and MIL-STD-2073-1E standards. The unit of issue is a package (PG), with a total quantity of 2 packages ordered under purchase request 7017761630 at a total price of $2.00, with delivery required in 84 days, FOB destination. The item is identified by NSN 6530-01-608-6210 and manufacturer part number 939Y37373, supplied by Riverside Home Medical Supply Inc. All deliveries must be shipped to the designated address in Kaiserslautern, Germany, with the final destination being APO AE 09227-0000, and must be palletized and labeled in accordance with DLA standards. Transportation is governed by DLAD Procurement Notes C19 and C20, and the contract specifies zero variance in quantity. The contract number is SPE2DH-26-T-5810, issued by the Department of Defense’s Medical Supply Chain FSH, with a response deadline of August 12, 2026, and a required delivery date of August 5, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the contract includes provisions for removal of government identification from non-accepted supplies. Covered defense information requirements may apply, and the contracting official must submit a referral to confirm regulatory compliance through EBS, including manufacturer and bidder details.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 331313
New
DIBBS
STRAINER, BRONZ
Solicitation # SPE2DH-26-T-5812
The contract is for a single unit of a bronze strainer designed for use in general-purpose sterilizers, with the NSN 6530-01-546-3556 and a purchase request number of 7017746314. Delivery is required within 20 days of award, and the item must be supplied as a complete, properly packaged unit in a sealed container that protects against damage or breakage. All packaging must comply with commercial standards as outlined in the procurement documentation, with exterior shipping containers suitable for safe delivery via common carrier at the lowest cost to the designated delivery point in Pascagoula, Mississippi. The material must be marked in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard can be obtained from DLA Troop Support. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, applicable as of the solicitation or award date depending on acquisition type. The contractor must specify the source and part number being supplied, and all packaging must adhere to DLA packaging requirements. Government identification must be removed from non-accepted supplies, and the solicitation is subject to covered defense information provisions. The acquisition is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu as the primary point of contact.
Alumina Refining and Primary Aluminum Production

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
WAX, DENTAL
Solicitation # SPE2DH-26-T-5811
Wax, dental, utility, red, 3/16 inch diameter, is being procured under solicitation SPE2DH-26-T-5811 for the U.S. Department of Defense, specifically for delivery to the USS ABRAHAM LINCOLN CVN 72. The item is supplied by Coltene/Whaledent, part number H00817, or Heraeus Kulzer Inc, part number 3/16 IN.D, 11 IN.L, RED, with a unit of issue as a box (BX) containing 80 units. The contract requires delivery of two boxes within 20 days, FOB destination, with zero variance allowed in quantity. All packaging must comply with DLA Packaging Requirements for Procurement, ensuring each unit is sealed in a protective container and shipped in commercial exterior packaging suitable for safe transport at the lowest rate. Marking must follow Medical Marking Standard No. 1, superseding MIL-STD-129, and all packaging is subject to DLA’s Master List of Technical and Quality Requirements. The item is FDA-regulated, requiring pre-award confirmation via EBS referral. The material must not contain intentionally added mercury or mercury compounds, except in permitted functional components like batteries or instruments, which must include a secondary containment to prevent leakage. Packaging must adhere to ASTM D3951 if non-hazardous under FED-STD-313, but DLA’s technical requirements take precedence. The NSN is 6520-00-226-0917, and shipment must follow DLA procedures for vessel and RDD 777 shipments, with required labels and transport instructions provided by the vendor.
Dental Equipment and Supplies Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 7 days
View Details
NAICS: 339112
New
DIBBS
Emergency Dental Kit SupplyThe contract seeks the supply of a vacuum-packed emergency dental restoration kit designated as TMM-DE, specifically designed for tactical medical environments. The kit must include essential dental materials such as hemostatic gauze, cotton pellets, sterile pads, dental floss, clove oil, and oral pain relief agents, all packaged to ensure sterility and readiness for immediate use in field conditions. The materials are intended to provide temporary dental care in combat or disaster scenarios where access to conventional dental facilities is unavailable, prioritizing rapid deployment and durability under harsh operational conditions. The contract is classified as a subcontract under NAICS code 339112, indicating it falls within the dental and ophthalmic equipment manufacturing sector. It was posted on August 4, 2026, with a response deadline of August 11, 2026, and is managed by the Department of Defense through the Medical Supply Chain FSH office. The designated place of performance is Fort Campbell, with a zip code of 42223-5000, suggesting the end-use location is tied to military units based there. While no point of contact or set-aside details are provided, the solicitation is accessible via the DIBBS system under reference number SPE2DH26T5771, and suppliers must comply with all military standards for packaging, sterility, and functionality to meet operational requirements.
Surgical and Medical Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 333248
New
DIBBS
SCOOP, LABORATORY
Solicitation # SPE2DH-26-T-5776
The contract specifies the procurement of sterile, disposable, individually sealed laboratory scoops manufactured from polystyrene plastic, intended for retrieving samples from larger sources. The product is white in color and supplied in boxes of ten units each, with a total order quantity of three boxes. The items are classified under NSN 6640-01-722-5866 and must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the type of acquisition. Packaging must adhere to DLA packaging standards, and any non-accepted supplies must have government identification removed prior to return. Delivery is required within twenty days after issuance, and performance will occur at APO 96278-2060. The solicitation, issued under SPE2DH-26-T-5776, was posted on August 4, 2026, with responses due by August 11, 2026. The contracting authority is the Department of Defense through the Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact.
All Other Industrial Machinery Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
DIBBS
MEASURING TUBE, GAS ANA
Solicitation # SPE2DH-26-T-5802
The measuring tube for gas analyzer is designed specifically to measure carbon dioxide content in compressed gases with a precise range of 100 to 3000 parts per million for one liter of air. It is constructed as a glass tube with melted tips for safe handling and is supplied in packages of ten units under the unit of issue PG. The item is governed by the DLA Master List of Technical and Quality Requirements, with applicable technical and quality standards referenced by R or I numbers. It is classified as a Type I (Code M) medical item with a mandatory non-extendable shelf life of 24 months, requiring that no more than three months have elapsed from the date of manufacture to the date of government delivery. All packaging must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and labels must clearly indicate the date of manufacture, expiration or retest date, contract number, and lot number, following the latest revision of MMS1C. Packaging must ensure protection against damage and comply with DLA packaging requirements, using commercial-grade sealed containers and appropriate shipping packaging suitable for safe delivery via common carrier at the lowest cost to the specified point of delivery. The item is identified by NSN 6630-12-189-3126 and is procured under contract number SPE2DH-26-T-5802, with a required delivery within five days of award and a solicitation response deadline of August 11, 2026. Coverage of defense information applies, and removal of government identification from non-accepted supplies is required. The contracting office is under the Department of Defense, Medical Supply Chain FSH, with primary point of contact Tina Vu at the provided email and phone.
Analytical Laboratory Instrument Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
BRUSH, SURGICAL SCRU
Solicitation # SPE2DH-26-T-5787
The contract specifies the procurement of 4 packages, each containing 300 disposable surgical scrub brushes, for a total of 1,200 units. Each package must consist of 10 dispensers, with each dispenser holding 30 brushes, and all packaging must comply with commercial standards and be sealed to protect against damage during transit. The product must have a minimum shelf life of 24 months, with no more than three months elapsed between the manufacturer’s date and delivery to the government. All labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, following the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. The brushes are to be shipped in commercial exterior containers suitable for safe delivery via common carrier to Ellsworth AFB, South Dakota, with delivery required within 20 days of award. Suppliers must provide the source and part number for the product, and all items must conform to technical and quality requirements listed in the DLA Master List. The procurement is under solicitation SPE2DH-26-T-5787, with responses due by August 11, 2026, and is managed by the Department of Defense’s Medical Supply Chain FSH.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
PANEL, MODULAR, HANGING
Solicitation # SPE2DH-26-T-5768
The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
FILM, PCR PLATE SEALING
Solicitation # SPE2DH-26-T-5795
Ultra-high optical clarity polyester sealing film designed for PCR plate applications features a medical-grade adhesive that provides strong, seamless sealing while remaining non-absorbing, non-fluorescent, and compatible with real-time PCR workflows. The film is heat resistant and certified for use across a broad temperature range from -40°C to 120°C, with certification as DNase-, RNase-, and nucleic-acid-free to ensure contamination-free performance in sensitive molecular biology applications. Each unit is sold as a box of 100 films, is non-sterile, and is identified by NSN 6640-01-695-8471. The procurement is governed by technical and quality requirements from the DLA Master List, with packaging and handling compliance dictated by DLA standards including the removal of government identification from non-accepted supplies. The solicitation SPE2DH-26-T-5795, issued by the Department of Defense’s Medical Supply Chain FSH, requires delivery within 20 days of order and is targeted to Langley AFB with a response deadline of August 11, 2026. The primary point of contact is Tina Vu, reachable via email and phone provided in the contract data.
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CONTAINER, TRANSPORT, TH
Solicitation # SPE2DH-26-T-5785
The contract specifies the procurement of thermal transport containers designed for the stable field transport of blood, vaccines, reagents, and pharmaceuticals, maintaining a strict temperature range of 1 to 10 degrees Celsius for up to 96 hours without the need for ice or external power, with guaranteed performance for at least 48 hours in any environmental condition. Each unit is passive, includes a canvas cover with straps, a temperature indicator, and phase change material, and is colored in three-color woodland camouflage to meet military specifications. The container dimensions are 10 x 9 x 10 inches externally and 6 x 5 x 6 inches internally, with a tare weight of approximately 6.8 pounds per unit. The items are supplied under part number PBT01176 by PELI BIOTHERMAL LLC and must be marked in strict compliance with the Medical Marking Standard No. 1, which supersedes all references to MIL-STD-129. Packaging and shipping must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, ensuring each unit is sealed and protected from damage, packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest rate, and shipped by traceable means—parcel post is prohibited. The contract is issued under solicitation SPE2DH-26-T-5785 with a total quantity of 3 units across four CLINs, each with a unit price ranging from $1.00 to $2.00, and a total price of $10.00. Delivery is required at destination FOB with no quantity variance allowed, and inspection and acceptance occur upon arrival. Required delivery dates are set for August 6 and 7, 2026, with a 20-day delivery window from the award date. All shipments must comply with DLA’s packaging and marking standards, and the supplies are not regulated by the FDA. The items will be delivered to multiple Department of Defense locations including Hurlburt Field, Florida and Nellis Air Force Base, Nevada, using designated freight addresses and military contact information. The contractor must specify the source and part number being supplied, and all documentation must reference the current DLA Master List of Technical and Quality Requirements as of the solicitation or award date.
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
WATER QUALITY ANALYSIS
Solicitation # SPE2DH-26-T-5603
The contract calls for the procurement of a single Water Quality Analysis Set, identified by NSN 6630-01-641-1591, designed as a portable laboratory solution for field testing of key water parameters including chlorine (0–3.4 mg/L), nitrate (0–40 mg/L), and the presence or absence of total coliforms and E. coli. The unit must include all necessary reagents for chemical analysis, a portable incubator, a thermometer, a pocket pH and TDS tester, and appropriate glassware, delivered as a complete, ready-to-use system. The item must have a shelf life of 12 months, with no more than two months elapsed between the date of manufacture and delivery to the government. Labeling must comply with Medical Marking Standard No. 1, clearly displaying the NSN, manufacturer name, CAGE code, date of manufacture, expiration or retest date, contract number, and lot number, and must include a machine-readable 2D Data Matrix barcode. Packaging must adhere to MIL-STD-2073-1E with packaging level B, using sealed unit containers and commercial shipping containers suitable for transport via common carrier, and preservation methods must follow coded standards without specific detailing. Delivery is required at APO AE 09094-3219 within 20 days after award, with FOB destination terms placing transport risk and cost on the contractor. The unit price for the single item is $5,086.00, and the solicitation, issued under SPE2DH-26-T-5603, remains open for response until August 7, 2026, with award anticipated through a possible automated process under simplified acquisition procedures. All contract clauses incorporate deviations for compliance with updated cybersecurity, labor, safety, and environmental regulations including NIST SP 800-171, DFARS cyber incident reporting, prohibitions on hazardous substances like hexavalent chromium and toxic materials, and requirements for employment eligibility verification, anti-trafficking, and sustainable products. Invoicing must be conducted exclusively through WAWF, with electronic submission mandated by DFARS provisions. The government retains the right to inspect and accept the delivered item at the destination under FAR 52.246-2, with no provisions for options or extended delivery windows. Offerors must provide their UEI and CAGE code, represent their small business status, and
Surgical Appliance and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 339114
New
DIBBS
RUBBER DAM
Solicitation # SPE2DH-26-T-5788
The contract is for the procurement of rubber dams specifically identified as 6-inch non-latex Super Dam sheets, measuring 6 x 6 inches in teal green color, with each package containing 15 sheets. The item is listed under NSN 6520-01-717-7806 and is required in a single package quantity. The solicitation number is SPE2DH-26-T-5788, issued by the Department of Defense through the Medical Supply Chain FSH office, with a response deadline of August 11, 2026, and a required delivery within 20 days of award. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The item may be subject to Covered Defense Information provisions, and bidders must clearly specify the source and part number being offered. Deliveries are to be made to the APO address with zip 09094-3219, and primary point of contact is Tina Vu at DLA.
Dental Equipment and Supplies Manufacturing

POSTED

1 day ago

DEADLINE

in 6 days
View Details