Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

DIT MCO Units

Active
W911KF26QA044Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Army Contracting Command-Detroit, Anniston Army Depot, is soliciting five DIT MCO wire harness testing units under solicitation number W911KF26QA044, with the procurement set aside exclusively for DIT-MCO International of Kansas City, Missouri. The North American Industry Classification System code for this requirement is 334419, and all proposals must be submitted electronically through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module; paper submissions and email responses are not permitted. Offerors are required to ensure their complete proposals are successfully received by the deadline of 10:00 AM CST on Wednesday, 5 August 2026, and are responsible for verifying delivery and compliance with all submission protocols outlined in the PIEE system documentation. Any questions regarding the solicitation must be submitted in writing via email to Crystal Hodges no later than Thursday, 30 July 2026, at 10:00 AM CST. The solicitation and all related amendments are issued and distributed electronically only via the SAM.gov website, and it is the offeror's sole responsibility to monitor this site regularly for updates, as failure to review and respond to amendments may result in proposal rejection. The point of contact for inquiries is Crystal Hodges, with alternate support available from Heather Robinson, and the place of performance is located at Anniston Army Depot, Alabama.

General Info

U.S. Army seeks five DIT MCO wire harness testers from DIT-MCO International, submission via PIEE by 5 August 2026.

Agency

Department Of Defense → W6QK Acc AnadView Agency

NAICS

334419 - Other Electronic Component ManufacturingView NAICS

Place of Performance

AL

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Anad
Contacts2 people available
OfficeANNISTON, AL, 36201-4199, USA
Organization / Agency
Department Of Defense → W6QK Acc Anad
View Agency Profile
Office AddressANNISTON, AL, 36201-4199, USA

Full Description

Show more
The government has a requirement for five (5) DIT MCO wire harness testing units in accordance with the Statement of Work at the Anniston Army Depot (ANAD). This procurement will be set aside for DIT-MCO International, 5612 Brighton Terrace, Kansas, City, MO 64130. The applicable North American Industry Classification System Code is 334419. All responses for the solicitation must be submitted in digitized/electronic format. Paper copy responses shall not be accepted. Any clauses or provisions of the solicitation which mention writing, returning, or submission of offer will mean electronic submission. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module. Responses sent by email will not be accepted. Instructions for Posting Offer can be found under the Solicitation Module Documentation-Training and Resources. It is the responsibility of the offeror to confirm receipt and ensure its offer, in its entirety, reaches the Army Contracting Command-Detroit, Anniston Army Depot (ANAD), before the time set for closing of the solicitation. Vendors wishing an electronic copy may download it on or after the issue date by accessing the following address via the Internet: http://www.sam.gov. CAUTION: This solicitation will be issued electronically as will any amendments thereto. Because of this, the Government is under no obligation and is, in fact, unable to maintain a bidder?s mailing list. It is therefore incumbent upon any interested parties to periodically access the above Internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of proposals may render your proposal non-responsive and result in the rejection of your proposal. All questions need to be submitted in writing via email to the point of contact no later than Thursday, 30 July 2026 at 10:00 AM CST. The solicitation will close Wednesday, 5 August 2026 at 10:00 AM CST. All solicitation responses must be submitted through the Procurement Integrated Enterprise Environment (PIEE). POINT OF CONTACT: Crystal Hodges, 256-235-6231, crystal.l.hodges8.civ@army.mil.

Similar Contracts

Same NAICS industry code

NAICS: 334419
New
DIBBS
FILTER ASSEMBLY, ELECTRThe contract solicitation SPE7M5-26-U-0055 seeks the procurement of 18 electrical filter assemblies (NSN 5915-01-533-8556) under an indefinite-delivery contract structured as a unilateral simplified indefinite-delivery contract (SIDC), with a maximum contract value of $350,000 and no guaranteed minimum order until a delivery order is issued. Deliveries are required within 125 days of award, with all shipments governed by FOB origin terms, meaning the contractor bears all transportation costs to a contiguous U.S. destination. The product must meet stringent technical and quality specifications outlined in the DLA Master List of Technical and Quality Requirements, referenced via R and I numbers, with packaging and labeling conforming to MIL-STD-129, ASTM D3951 for non-hazardous goods, and TQ requirement IP025 for hazardous materials as defined by FED-STD-313. Hazardous substances must be labeled per OSHA’s Hazard Communication Standard, and any radioactive content exceeding 0.002 microcuries per gram or 0.01 microcuries per item requires special pre-award notification and compliance with MIL-STD-129 marking. Strict inspection and acceptance criteria mandate zero non-conformances in sampling under MIL-STD-1916, ASQ H1331, or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must implement CMMC Level 2 cybersecurity practices, comply with DFARS 252.204-7012 for safeguarding covered defense information, and adhere to prohibitions on mercury in hardware except for specific exempted components with secondary containment. All invoicing must be processed electronically through Wide Area WorkFlow (WAWF), and the contractor must maintain an active SAM registration and comply with employment eligibility, anti-trafficking, and sustainable procurement clauses. The solicitation is open to all offerors, with no set-aside designation, and responses must be submitted electronically via the DLA DIBBS portal by August 10, 2026, with primary point of contact Jacob Hamilton at the Defense Logistics Agency.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → W6QK Acc Anad

Same awarding agency

NAICS: 541330
New
Federal
Configuration Management & Quality Assurance ServicesThe contract requires the provision of Configuration Management and quality assurance services to maintain technical data integrity, ensure complete part traceability, and uphold compliance with AS9100 and MIL-STD-31000 standards throughout sustainment operations. These services are critical to supporting the Department of Defense’s ongoing maintenance and logistics efforts, with performance centered in the 36201 zip code area. The work is structured as a subcontract under NAICS code 541330, targeting specialized engineering and technical consulting services aligned with defense aviation and systems sustainment requirements. All activities must demonstrate rigorous adherence to industry-standard quality protocols to prevent discrepancies, ensure consistency in documentation, and support audit readiness across the product lifecycle. Bids are due by August 10, 2026, at 10:00 PM, following a solicitation posted on July 22, 2026. There is no set-aside classification specified, and while the specific contracting office address details are not provided, the agency responsible is W6QK Acc Anad under the Department of Defense. The contract does not designate a point of contact publicly, and full details can be accessed through the official SAM.gov portal. Successful bidders will be expected to deliver consistent, auditable CM processes that safeguard technical accuracy, enable efficient parts replacement and repair, and uphold strict defense quality regulations without deviation.
Engineering Services

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 811310
New
Federal
Depot-Level Overhaul & Recapitalization ServicesThe contract requires performance of depot-level overhaul, testing, inspection, and sustainment services for legacy ground combat vehicles, artillery systems, and Department of Defense locomotives, with work to be conducted primarily at Anniston Army Depot in Alabama, zip code 36201, or at remote temporary duty locations as needed. The scope encompasses comprehensive recapitalization efforts to restore and maintain operational readiness of aging military equipment critical to land-based combat and logistics operations. All work must meet stringent DoD technical and quality standards to ensure safety, reliability, and extended service life of the systems involved. The solicitation is structured as a subcontract under the North American Industry Classification System code 811310, which pertains to repair and maintenance of industrial and commercial machinery and equipment. The opportunity was posted on July 22, 2026, with a firm deadline for response set for August 10, 2026, at 10:00 PM Eastern Time. The awarding agency is the Department of Defense, specifically under the office identifier W6QK Acc Anad, indicating procurement activity managed through the Army’s logistics and sustainment command structure. The contract is likely intended to support the continued operational deployment of legacy platforms as modernization programs are phased in.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 332999
New
Federal
Advanced Manufacturing & 3D Printing of Legacy PartsThe contract seeks qualified subcontractors to produce replacement parts for legacy military systems using advanced manufacturing techniques, primarily additive manufacturing such as 3D printing, when traditional supply chains are no longer viable. The work is focused on ensuring operational readiness by enabling the rapid fabrication of critical components that are otherwise unavailable through conventional sourcing, with an emphasis on meeting exacting military specifications for performance, durability, and compatibility. The place of performance is designated as 36201, indicating that production activities must occur within or be coordinated through that geographic area. The contract is classified as a subcontract under NAICS code 332999, which covers other miscellaneous fabricated metal product manufacturing, and is issued by the Department of Defense through W6QK Acc Anad. The solicitation was posted on July 22, 2026, with a firm response deadline of August 10, 2026, requiring proposers to demonstrate proven capability in additive manufacturing for defense applications, supply chain resilience expertise, and quality assurance processes aligned with military standards. There is no specified set-aside classification, meaning the opportunity is open to all eligible businesses, and interested parties must submit proposals through the SAM.gov portal prior to the deadline.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 541715
New
Federal
Reverse Engineering & Technical Data Package (TDP) DevelopmentThe contract requires the reverse engineering of legacy mechanical, electrical, and structural components from military systems to develop fully qualified Level 3 Technical Data Packages compliant with MIL-STD-31000 standards. This effort involves detailed analysis and documentation of existing hardware to recreate precise engineering specifications, ensuring that the resulting data packages support sustainment, reproduction, and interoperability of defense equipment without reliance on original manufacturer documentation. The work demands high precision, adherence to military technical data requirements, and the ability to interpret and reconstruct complex components from limited or degraded physical samples. The opportunity is structured as a subcontract under the Department of Defense, with the performing office identified as W6QK Acc Anad. The place of performance is designated with a zip code of 36201, indicating the physical location where the reverse engineering and data package development must occur. Interested parties must submit proposals by August 10, 2026, and the North American Industry Classification System code 541715 signifies that the work falls under scientific and technical consulting services. The solicitation does not specify set-asides or point of contact information, and responses must align strictly with the technical and compliance requirements of MIL-STD-31000 to be considered for award.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 days ago

DEADLINE

in 14 days
View Details
NAICS: 541330
New
Federal
Area of Interest (AoI) – Lifecycle Sustainment, Advanced Engineering, and Multi-Class Parts Sourcing Support Services (CSO-W911KF25SC002)This contract under the ACC-ANAD Organic Industrial Base Modernization Commercial Solutions Opening establishes an Area of Interest to procure agile, commercial-based solutions for the sustainment of legacy U.S. Army ground combat vehicles, locomotives, and artillery systems. The effort centers on lifecycle support, advanced engineering, and rapid sourcing of Class 4 and Class 9 components—particularly those affected by diminishing manufacturing sources and material shortages—to prevent depot production delays and maintain operational readiness. Contractors must demonstrate proven capabilities in reverse engineering obsolete parts to produce fully qualified, non-proprietary Level 3 Technical Data Packages and employ advanced manufacturing techniques such as additive manufacturing to recreate unavailable components. Performance is centered at Anniston Army Depot, Alabama, with inspections and work conducted both at depot and remote TDY locations. The vehicle requires compliance with AS9100 quality standards, strict Configuration Management procedures, and integration into the Government’s Payment Invoicing and Evaluation Engine for all invoicing and payment processing. Evaluation is based on a Best Value trade-off approach, not Lowest Price Technically Acceptable, and focuses on four key technical factors: integrated sustainment strategy, DMSMS mitigation and parts-sourcing agility, reverse engineering and advanced manufacturing maturity, and specialized capabilities for maintaining DoD locomotives and non-tactical generators. Proposals are assessed as Acceptable or Unacceptable on technical merit and Fair and Reasonable or Not Fair and Reasonable on price, with no numerical weights assigned. Offerors must maintain a current Unique Entity ID and active SAM.gov registration but are not required to self-certify socioeconomic status during initial submission. Proprietary information must be clearly marked and will be protected under FOIA for five years; submissions cannot be marked confidential. The Commercial Solution Proposal must be split into separate Technical and Price volumes, with Phase 1 Solution Briefs limited to five pages or fifteen slides. All proposals must be submitted electronically by the August 10, 2026 deadline, and no work may commence without a written directive from the Contracting Officer. The Government retains authority to award to any, some, or none of the respondents, and while no contract value is specified, performance periods are intended to be short-term, typically not exceeding twelve months.
Engineering Services

POSTED

5 days ago

DEADLINE

in 14 days
View Details