Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

DLA Compliant Packaging and Labeling Services

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for DLA Compliant Packaging and Labeling Services involves providing specialized packing, marking, and labeling for prime contractors delivering hardware to the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to RP001 and ASTM D3951 for packaging and MIL-STD-129 for marking. The service provider is responsible for managing palletization and labeling to ensure all military shipments are properly prepared for storage and FOB Origin pickup. The project is categorized under NAICS code 561910 and will be performed in New Cumberland, Pennsylvania. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

General Info

DLA compliant packaging and labeling services in Pennsylvania, deadline October 30, 2026.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

561910 - Packaging and Labeling Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-6245.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PIN-RIVET

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs preformed packing, marking, and labeling for prime contractors delivering DLA Weapons Support ASC hardware. Executes packaging per RP001 and ASTM D3951, and marking per MIL-STD-129. Manages palletization and labeling for military shipment and storage. Delivers fully packed and labeled shipments ready for FOB Origin pickup.

Similar Contracts

Same NAICS industry code

MIL-SPEC Packaging and Preservation Services

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and International Shipping Services

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Preservation ServicesThis subcontract for the Department of Defense, specifically the DLA Weapons Support ASC Supplier OEM Division, involves specialized cleaning, preservation, and packaging services for prime contractors. The scope of work requires the cleaning and drying of components, the application of Mat 49 preservative, and the use of heat-sealed barrier bags. All wrapping and cushioning must adhere to MIL-STD-2073-1E and RP001 standards, with marking conducted according to MIL-STD-129. The final deliverable consists of 27 individually packaged and marked spur gears prepared for FOB Origin shipment. Performance of these services will take place at Tinker AFB. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 561910.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The scope of work involves the specialized packaging, sealing, and marking of rubber O-rings to ensure they are ready for FOB Origin shipment. Specifically, the contractor must seal components in medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117, Type II, Class C, Style 1, while applying all necessary markings per MIL-STD-129 and MIL-STD-2073-1E. The project is managed under NAICS code 561910 for the Department of Defense and will be performed at Robins Air Force Base. Interested parties should note the response deadline of November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and Marking ServicesThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires specialized packaging and marking services for 34 pressure gages. The work must be performed in New Cumberland, Pennsylvania, ensuring all items are ready for FOB Origin shipment. The contractor is required to adhere strictly to MIL-STD-2073-1E and MIL-STD-129 standards, utilizing industrial marking equipment and applying Special Marking Code 05 for delicate instruments. To ensure the safety of the equipment, the use of MIL-SPEC cushioning, dunnage, and moisture barriers is mandatory.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

IP042 Oxygen Cleaning and Military Packaging ServicesThis subcontract involves providing specialized IP042 oxygen clean processing and military-grade packaging services for prime contractors supporting Department of Defense supply contracts. The scope of work requires the removal of hydrocarbons through oxygen cleaning, the application of markings in accordance with MIL-STD-129, and final packaging following MIL-STD-2073-1E standards. The project entails the processing of 82 units, which must be cleaned, marked, and packaged within a dedicated oxygen-cleaning facility. Once completed, the units are to be delivered to the DLA Distribution DDSP New Cumberland facility located in New Cumberland, Pennsylvania.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Labeling ServicesThis subcontract for MIL-SPEC Packaging and Labeling Services supports the DLA Weapons Support Land Supply Chain by providing specialized military-grade packaging and marking for prime contractors. The scope of work focuses on processing shelf-life sensitive O-rings using medium duty, waterproof, greaseproof, and opaque bags in accordance with MIL-DTL-117 to protect against UV deterioration. Additionally, the contractor must apply markings following MIL-STD-129 and Special Marking Code 32 to ensure all items are shipment-ready. The project falls under NAICS code 561910 and is managed by the Department of Defense. Performance of these services will take place in New Cumberland, Pennsylvania. Interested parties should note that the response deadline for this opportunity is November 2, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves the specialized packaging of 70 quick release pins in accordance with MIL-STD-2073-1E and the application of markings per MIL-STD-129. To ensure compliance, the provider must utilize MIL-SPEC wraps, cushions, and industrial labeling equipment before delivering the finished products to DLA Distribution San Joaquin. The project falls under NAICS code 561910 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Performance of the contract will take place in Tracy, California. Interested parties should note the response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for the Department of Defense, specifically the DLA Weapons Support Maritime Supply Chain, involves providing specialized military-grade packaging, marking, and palletization services. The scope of work focuses on preparing fuse assortments for international transit to Saudi Arabia, ensuring all components are shipping-ready and meet rigorous government standards. The contractor is required to utilize MIL-SPEC materials and adhere to strict technical guidelines, including ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and RP001 standards for palletization. This project falls under NAICS code 561910 and is designed to support prime contractors in maintaining the integrity of critical military components during global transport.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in about 19 hours

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the provision of specialized marking, packaging, and palletization for prime contractors fulfilling DLA supply contracts. The service provider must ensure all shipments are fully prepared for DLA acceptance by applying markings according to MIL-STD-129, executing packaging data per MIL-STD-2073-1E, and palletizing shipments in accordance with RP001. The contractor is expected to utilize military-grade packaging materials and MIL-SPEC labeling equipment to meet strict federal standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 561910. The solicitation was posted on October 22, 2026, with a response deadline of November 2, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and Marking ProviderThis subcontract opportunity, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, seeks a provider to perform specialized packaging and marking services for prime contractors. The scope of work requires strict adherence to military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The provider must implement Preservation Method 33 and Cleaning/Drying 1 using industrial marking equipment and military-specification materials to ensure all shipments are ready for delivery to DLA Distribution in Anniston, Alabama. The project falls under NAICS code 561910 and is centered in Anniston, Alabama. Interested parties must note the response deadline of October 30, 2026. This contract is designed to ensure that critical supply chain components meet rigorous Department of Defense requirements before final distribution.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

DLA Compliant Packaging and Marking ServicesThis subcontract involves providing specialized military-grade packaging, marking, and labeling services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to package items according to ASTM D3951 and DLA RP001 standards, while ensuring all marking and labeling comply with MIL-STD-129 using approved equipment. The specific deliverable for this project consists of 31 packages of screws, which must be fully marked and labeled for shipment to Tracy, California. This opportunity falls under NAICS code 561910 and was posted on October 22, 2026, with a response deadline of October 30, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply and Manufacture of Quick Release PinsThis subcontract involves the manufacture and supply of 100 precision-engineered quick release pins for the DLA Weapons Support ASC Commodities Division under the Department of Defense. The items must strictly adhere to NSN 5315014943040 specifications and are classified as Critical Application Items. Production requires the use of precision machining and marking equipment, with bare item marking performed according to RQ017. Quality assurance is a primary requirement, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332710. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

POSTED

about 5 hours ago

DEADLINE

Manufacturer of Hexagon Head Cap Screws (NASM90725)This subcontract involves the manufacture of 900 high-precision hexagon head cap screws, identified by NSN 5305013258388 and part number MS90725-113, for the DLA Weapons Support ASC Commodities Division. The contractor must fabricate the screws according to NASM90725 Revision 04 and utilize precision machining equipment and a dedicated quality control lab. Quality assurance sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331. The project requires strict adherence to the Buy American Act, MIL-STD-2073-1E, and MIL-STD-129. Performance will take place in Albany, Georgia. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325009340568)This subcontract involves the supply of 142 precision-manufactured retaining rings, identified by Part Number 206A247 and NSN 5325009340568, for the DLA Weapons Support ASC Commodities Division. The items are designated as Critical Application Items, requiring strict adherence to RA001 technical requirements and RP001 packaging standards. Performance will take place at Hill AFB, and the contractor must possess precision machining equipment and a valid SAM registration to qualify. The procurement falls under NAICS code 332510 and is managed by the Department of Defense. Interested parties must submit their responses by October 30, 2026. The successful provider is responsible for ensuring all delivered components meet rigorous quality and tolerance standards to support prime contractors on critical weapons support projects.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Electrical Cable Assemblies (NSN 6150-00-368-8640)This subcontract involves the manufacture or sourcing of 20 black specialized electrical power cable assemblies identified by NSN 6150003688640 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict packaging standards per RP001 DLA requirements and adhere to hazardous material labeling regulations under 29 CFR 1910.1200. Additionally, the provider must certify compliance regarding Covered Defense Telecommunications Equipment. The project falls under NAICS code 334418 and is performed in New Cumberland. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026. This agreement supports prime contractors in fulfilling broader Department of Defense supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services involves providing specialized logistics support for prime contractors working with the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging, marking, and palletization of four eye bolts destined for DLA Distribution in Albany, Georgia. All tasks must be executed using military-specification materials and equipment to ensure strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and DLA requirement RP001 for palletization. The opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note that the response deadline is October 30, 2026, with the performance of services taking place in Albany, Georgia.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Precision CNC Machining and Fabrication of Critical Eye BoltsThis subcontract involves the precision CNC machining and fabrication of four critical application eye bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer must produce the parts in strict accordance with Basic Drawing NR 80064 2584025 Revision J and Reference Drawing NR OMLM6 2584542 Revision AA. Performance of the contract will take place in Albany. To qualify, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with CMMC Level 2 and DFARS 252.204-7012 standards. Additionally, the provider must adhere to all ITAR and EAR regulations. The response deadline for this requirement is October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Industrial Coating and PaintingThis subcontract for Aerospace Industrial Coating and Painting involves providing surface preparation and painting services for prime contractors supporting DLA Weapons Support ASC missile projects. The scope of work requires the application of primer according to SSPC-25 standards with a dry film thickness between 0.0008 and 0.0010 inch, followed by a final topcoat meeting specified TT standards to deliver finished mounting plates. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332431. Due to the nature of the defense work, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The response deadline for this opportunity is October 30, 2026.

Metal Can Manufacturing

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS