Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Domestic & International Logistics (U.S.-Flag Vessel Compliance)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive management of ocean transportation logistics with strict adherence to U.S.-flag vessel regulations or the procurement of valid waivers when exceptions are necessary. All activities must ensure compliance with federal maritime laws governing domestic and international shipping routes, emphasizing the use of American-owned, -crewed, and -flagged vessels unless a waiver is formally approved. The scope encompasses planning, coordination, and execution of freight movements across maritime corridors, with accountability for documentation, regulatory filings, and real-time tracking to maintain continuous compliance throughout the supply chain. Performance is centered at NEW CUMBERLAND, PA, with the work falling under NAICS code 488410 for support activities for water transportation. This is a subcontract opportunity issued by the Department of Defense through its LAND SUPPLY CHAIN organization, with responses due by August 3, 2026. The solicitation does not specify a set-aside classification, and bidders must be prepared to demonstrate past experience in maritime logistics, U.S.-flag vessel coordination, and regulatory navigation within defense-related contexts. All submissions must be made through the DIBBS portal at the provided URL within the stated deadline.

General Info

Manage ocean logistics using U.S.-flag vessels or approved waivers under DoD subcontract, due August 3, 2026.

Agency

Department Of Defense → LAND SUPPLY CHAINView Agency

NAICS

488410 - Motor Vehicle TowingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → LAND SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manage ocean transportation logistics ensuring compliance with U.S.-flag vessel requirements or securing applicable waivers.

Similar Contracts

Same NAICS industry code

NAICS: 488410
New
DIBBS
Packaging, Marking, and Logistics SupportThe contract requires full compliance with MIL-STD-129 and MIL-STD-2073-1E standards for packaging, barcoding, and marking of military cargo, ensuring all materials are properly labeled, documented, and prepared for standard military logistics handling. This includes the application of standardized barcodes, military specification markings, and secure packaging protocols to guarantee inventory accuracy and traceability throughout the supply chain. The work must be performed and coordinated to facilitate seamless delivery to DLA San Joaquin, with all logistics activities managed under FOB Origin terms, meaning responsibility and risk transfer to the buyer upon shipment from the supplier’s location. Logistics coordination must be executed with precision to meet DLA’s operational timelines and tracking requirements, with the place of performance specified as Tracy, CA, 95304-5000. The solicitation is classified as a subcontract under NAICS code 488410, indicating the activity falls under support activities for transportation. The response deadline is set for July 29, 2026, with the solicitation posted on July 24, 2026, leaving a limited five-day window for submission. All work must align with Department of Defense standards, and adherence to the specified military standards is non-negotiable to ensure compatibility with DLA’s receiving and distribution infrastructure.
ACTIVE DEVICES DIVISION

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 488410
New
SLED
San Joaquin County Freeway Service PatrolThe San Joaquin County Freeway Service Patrol solicitation, issued by the San Joaquin Council of Governments under solicitation number 2027-RFQ-001, seeks qualified providers to support a critical transportation service aimed at improving freeway mobility and safety across the region. As the regional planning and coordinating agency, SJCOG oversees transportation programs funded by Measure K and is responsible for ensuring efficient, reliable public infrastructure, including freeway operations. This contract will engage a provider to deliver incident response, vehicle assistance, and congestion mitigation services on key county freeways, aligning with SJCOG’s broader mission to enhance regional mobility and reduce travel delays through proactive highway management. The opportunity is open to responders through August 20, 2026, with all performance expected to take place within California's San Joaquin County. The solicitation is managed by SJCOG’s Planning division based in Stockton, with Blake Dunford, Senior Regional Planner, serving as the primary point of contact for technical inquiries and Gabriela Zamora, Administrative Technician, handling administrative correspondence. SJCOG, a joint-powers authority representing nine cities and San Joaquin County, operates under state and federal guidelines to coordinate transportation services that support economic vitality, environmental sustainability, and resident mobility. While this specific contract is focused on freeway service patrols, it is one component of SJCOG’s comprehensive portfolio that includes affordable housing allocation, air quality planning, and regional transit coordination. Respondents are expected to demonstrate proven experience in traffic management, emergency response coordination, and the ability to work seamlessly within a multi-jurisdictional public agency framework.
Planning

POSTED

4 days ago

DEADLINE

in 24 days
View Details
NAICS: 488410
New
DIBBS
MIL-STD-2073-1E Packaging and Palletization ServicesThe contract requires comprehensive packaging and palletization services in full compliance with MIL-STD-2073-1E standards, encompassing all aspects of defensive packaging including cushioning materials, container coding, labeling, and secure palletization to ensure the integrity of military-grade equipment during storage and transit. All work must adhere to DLA RP001 requirements, which dictate specific procedural and documentation protocols for defense logistics, ensuring traceability, environmental resilience, and interoperability across the supply chain. The scope demands strict adherence to federal military packaging specifications without deviation, and all deliverables must be verified to meet the operational readiness criteria set by the Department of Defense. Deliverables are to be performed at the designated place of performance in Cherry Point, North Carolina, with a response deadline of August 3, 2026, and the solicitation was posted on July 23, 2026. This is a subcontract under NAICS code 488410, which relates to freight transportation arrangement services, and the managing agency is the Maritime Supply Chain under the Department of Defense. While no set-aside designation is specified, the subcontract is open to qualified vendors capable of executing complex defense packaging operations with full regulatory compliance. All technical and procedural requirements must be fulfilled without reliance on external documentation, emphasizing hands-on expertise and proven experience with military packaging standards.
MARITIME SUPPLY CHAIN

POSTED

4 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 333613
New
DIBBS
INSERTThis contract, issued under solicitation SPE7L1-26-T-876N by the Department of Defense’s Land Supply Chain, requires the delivery of one unit of item NSN 3040-01-542-1286 with a designated purchase request number 7017607452. The item must be delivered within 20 days to the specified FPO address for USS MAHAN DDG 72, with delivery terms set at FOB origin. Packaging must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, including specific preservation methods, wrapping materials, and unit container codes, while palletization follows DLA’s RP001 packaging requirements. No parcel post shipments are permitted; all deliveries must utilize the fastest traceable means, and transportation logistics follow DLA procedural notes C19 and C20. The item is to be inspected and accepted at the destination point with no tolerance for quantity variance. The contract prohibits the intentional incorporation or direct contact of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lamps, instrumentation, weapon systems, or chemical reagents specified by NAVSEA, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Class I ozone-depleting chemicals are strictly forbidden, overriding any conflicting specification requirements unless explicitly authorized. All substitute chemicals must receive prior approval. The supplier is identified as Argon St, Inc. with part number M687828304, and the unit of issue complies with DoD standards referenced via the provided ANSI X12 link. The contract includes mandatory government-use markings, special shipment identifiers including RDD 777 and TCN V219466198CA41, and requires shipment by the original required delivery date of July 22, 2026, with no provision for delays. The point of contact for inquiries is Kristina Derry at DLA.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
MUFFLER, EXHAUSTThe contract is for the procurement of one muffler, exhaust unit with NSN 2990-01-417-9342 and part number 86192M supplied by CUMMINS FILTRATION INC., under solicitation SPE7L1-26-T-876R. The item must be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur upon delivery at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific packaging methods, materials, and unit containment requirements, with palletization governed by DLA packaging protocols. The delivery address is USS SAN ANTONIO LPD 17, FPO AE 09587, and shipment must follow DLAD procedural notes C19 and C20. Mercury and mercury-containing compounds are strictly prohibited in the hardware unless explicitly exempted for functional components such as certain batteries, lamps, sensors, or weapons systems, in which case secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are incorporated by direct linkage to the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date or amendment date, depending on acquisition size. The contract is issued under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact, and procurement is governed by federal solicitation rules under NAICS code 336390.
Other Motor Vehicle Parts Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
FOLLOWER, WEAPONThis contract specifies the procurement of 40 weapon followers with NSN 1025-01-670-6432 under solicitation SPE7L1-26-T-878C, with a delivery deadline of 286 days after contract award. The item is classified as a Category I munitions component under demilitarization requirements, and stringent quality controls are enforced through tailored higher-level requirements applicable to both manufacturers and non-manufacturers, including inspection and acceptance at origin, configuration change management, and mandatory use of qualified products or manufacturers listed in approved QPLs or QMLs. The supplier must comply with DLA packaging standards, prohibit the use of ozone-depleting chemicals in any part or process, and ensure all technical data associated with the item is handled in accordance with strict export controls under ITAR or EAR, requiring compliance with DFARS 252.225-7048 and DLA-specific access protocols including JCP certification, mandatory training, and approval to handle controlled technical data. The contractor must be a CMMC Level 2 certified third-party assessment organization and hold phosphate coating supplier certification, with all technical and quality requirements sourced from the DLA Master List of Technical and Quality Requirements as referenced in RA001. Government identification must be removed from non-accepted supplies, and any deviations or waivers require formal engineering change proposal submission. All technical data is subject to export restrictions, and disclosure to foreign persons—regardless of location or nationality—is prohibited unless authorized. The contract is managed by the Department of Defense’s Land Supply Chain under a federal acquisition framework with a response deadline of August 6, 2026, and performance delivery centered in New Cumberland, Pennsylvania, with Miguel Acevedo designated as the primary point of contact.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
ANODE, CORROSION PREThis contract is for the procurement of eight corrosion-preventing anodes identified by NSN 5340-01-691-7061 and part number H535-0503-PN-163, sourced from Electric Boat Corporation and Leidos Engineering & Sciences, LLC. The items must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Ozone-depleting chemicals are strictly prohibited in any component, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must adhere to MIL-STD-2073-1E with specified methods for preservation, wrapping, cushioning, and container type, and all marking must follow MIL-STD-129 with no special marking codes. The anodes are to be delivered FOB origin within 165 days, with zero tolerance for quantity variance. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation procedures must conform to DLA procedural notes C19 and C20. The contract was issued under solicitation SPE7L1-26-T-878K, with a response deadline of August 6, 2026, and a required ship date of January 19, 2027, against an original delivery date of August 29, 2027. Contact for inquiries is Isabelle Szulewska at DLA, with the North American Industry Classification System code 332510.
Hardware Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 313320
New
DIBBS
BRACKET, TOW HOOKThe contract is for the procurement of 15 BRACKET, TOW HOOK units with NSN 2540-01-506-0536 under solicitation SPE7L1-26-T-878U, with a delivery deadline of 151 days after award. The item is defined by Army drawings and must comply with DCSC Drawing 16236 CS-2300-0001 for paint finishing, which specifies Chemical Agent Resistant Coating (CARC) and high-temperature coating requirements, overriding any conflicting finish specifications in the original Army drawings. The contract enforces strict compliance with DLA’s Master List of Technical and Quality Requirements, including provisions for inspection at origin, removal of government identification from non-accepted items, and adherence to Qualified Products Lists or Qualified Manufacturers Lists for components. Zero-defect sampling is required per MIL-STD-1916 or ASQ H1331 with AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor attributes respectively, and any previously tested items require certification of conformance unless design or manufacturing processes change. The item is prohibited from containing Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. Export-controlled technical data associated with this item is subject to ITAR or EAR, and only contractors with approved JCP certification, completed DOD export training, and DLA authorization may access such data. Full and open competition applies, and a Certificate of Conformance is authorized unless waived. The contract is under the jurisdiction of the Department of Defense’s Land Supply Chain, with performance location in Texarkana, Texas, and primary point of contact Matthew Lepak.
Fabric Coating Mills

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HINGE, DOOR, VEHICULAThe contract pertains to the procurement of a single hinge assembly designated as HINGE, DOOR, VEHICULA with NSN 2510-01-644-9137, required for delivery within five days of award. The solicitation number is SPE7L1-26-T-877F, issued by the Department of Defense’s Land Supply Chain under the NAICS code 332999, with a response deadline of August 6, 2026. The item is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, incorporated by reference and enforced under the control revision guidelines applicable to the solicitation issuance date. Cybersecurity compliance is mandated at CMMC Level 2 for any third-party assessment organization involved. The technical data associated with this item is controlled under ITAR or EAR export regulations, prohibiting any unauthorized disclosure to foreign persons or entities, including foreign national employees and subsidiaries, and requires strict adherence to DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have received explicit authorization from DLA. Additionally, requirements for configuration change management, removal of government identification from non-accepted supplies, and compliance with DLA packaging standards are active. The designated place of performance is Fort Riley, Kansas, with Kristina Derry listed as the primary point of contact for inquiries.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details