Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Domestic Raw Material & Component Supply for Bearings

Active

Federal

Response Deadline07/31/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of U.S.-sourced high-grade steel, lubricants, and seals essential for the production of ball bearings, with strict adherence to the Buy American Act and Berry Amendment to ensure all materials originate entirely within the United States. Full traceability of every component must be maintained throughout the supply chain, documenting origin, processing, and certification to confirm compliance with federal sourcing mandates. The materials must meet exacting quality standards for use in defense-related bearing applications, where reliability and material integrity are critical. Performance of this subcontract is centered at Cherry Point, North Carolina, with a response deadline of July 31, 2026, and the solicitation was posted on July 23, 2026. The contract falls under NAICS code 331110, which classifies it within the iron and steel mill and steel product manufacturing sector. It is managed by the ASC Commodities Division under the Department of Defense, and all submissions must align with the technical and regulatory requirements to qualify for award, with no set-aside provisions specified.

General Info

U.S.-sourced steel, lubricants, and seals for defense ball bearings, compliant with Buy American and Berry Amendment, due July 31, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 31

Submission deadline

Response Deadline

07/31/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of U.S.-sourced high-grade steel, lubricants, and seals for ball bearing production, with full traceability and compliance with Buy American Act and Berry Amendment.

Similar Contracts

Same NAICS industry code

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Defense Logistics Agency

POSTED

DEADLINE

SHACKLEThe contract solicits 34 packages of zinc-coated chain shackles, each containing two units, under NSN 4030-00-369-3894, with delivery required to the DLA Distribution facility in New Cumberland, Pennsylvania, no later than March 28, 2027. The item is manufactured via a forging process and must conform to the Technical Data Package Rev A Gen 1 and Quality Assurance Provision 13873, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-129 for marking and labeling, with palletization adhering to DLA Packaging Requirements for Procurement, and all items must be physically marked per RQ017. Delivery is FOB origin, with inspection and acceptance performed at the destination by the government, and payment must be processed exclusively through Wide Area WorkFlow. The contract includes mandatory clauses for cybersecurity compliance under NIST SP 800-171, safeguarding defense information, reporting safety issues, prohibiting hexavalent chromium and hazardous materials, and ensuring transportation via U.S.-flag vessels. Offerors must hold valid UEI and CAGE codes, represent their small business status accurately, and submit quotations electronically via DIBBS by July 24, 2026, with no pricing data provided in the solicitation, making the contract value unconfirmed.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Specialty Metals and Raw MaterialsThe contract seeks a small business supplier to provide DFARS-compliant specialty raw materials, including aluminum and steel, specifically for the manufacture of military battery box covers. All materials must be accompanied by traceable mill test reports to ensure full compliance with defense sourcing regulations and to verify the origin and quality of the metals. The requirement is part of a Total Small Business Set-Aside under the SBA, meaning only small businesses are eligible to respond, and the NAICS code 331110 classifies this as a primary metals manufacturing opportunity. Performance of the contract is designated for Tracy, California, with a zip code of 95304-5000, indicating the location where the materials will be delivered or utilized in the production flow. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and it is structured as a subcontract under the Department of Defense’s LSO Combat Vehicles and Armament division. All suppliers must be prepared to meet strict defense supply chain standards and provide documentation to support material traceability and regulatory adherence.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Supply of Raw Materials or SubcomponentsThe contract calls for the supply of raw metal stock, seals, and other subcomponents essential to the manufacturing of brake piston assemblies, with specific materials including high-strength steel and elastomers. This subcontract is issued under the NAICS code 331110, indicating its alignment with primary metal manufacturing, and is managed by the Fluid Handling Division within the Department of Defense. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, leaving a narrow window for qualified suppliers to submit proposals. Performance of the contract is designated to occur at Hill Air Force Base, with a specified zip code of 84056-5734, indicating the location where materials will be delivered and integrated into the assembly process. The requirement is focused on precision-engineered components critical to braking system functionality, necessitating adherence to strict material specifications and quality standards to ensure operational reliability in defense applications.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Material (Alloy Steel) SupplyThe contract calls for the supply of certified alloy steel billet or bar stock that meets strict military specifications, intended for use in the forging of critical shaft components. The material must conform to defined quality and performance standards required for high-stress applications, ensuring reliability and durability in defense-related equipment. This is a subcontract under a Women-Owned Small Business Set-Aside, designated under NAICS code 331110, which restricts eligibility to qualified women-owned small businesses. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, and performance is expected to be carried out at a facility in Tracy, California, with a zip code of 95304-5000. The contracting activity is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office, and all submissions must be made through the official DIBBS platform as specified in the provided link.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Raw Materials or Components for Coupling AssemblyThe contract calls for the supply of military-grade raw materials including high-strength alloy steel, specialized fasteners, and critical seals to support the assembly of the Coupling, Tension Regulator. All materials must meet stringent defense standards, including compliance with the Defense Federal Acquisition Regulation Supplement and full traceability requirements to ensure origin, quality, and authenticity throughout the supply chain. The materials are essential for the structural integrity and operational reliability of the final assembly, making adherence to exact specifications mandatory. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with the North American Industry Classification System code 331110 indicating its alignment with primary metals manufacturing. The solicitation was posted on July 23, 2026, with a firm response deadline of July 27, 2026, leaving a narrow window for qualified suppliers to submit proposals. Performance of the contract is expected to occur under the oversight of the DoD, though the specific location of performance is not specified.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

in about 4 hours

Supplier of Raw Materials or ComponentsThe contract seeks suppliers to provide raw metal stock or sub-components essential for fabricating mounting brackets, with materials including steel or aluminum. It is classified as a subcontract under NAICS code 331110, associated with the Department of Defense through its LAND SUPPLY CHAIN organization, and the performance location is specified as Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 23, 2026, with responses required by August 3, 2026, indicating a tight procurement timeline for qualified vendors. All bidding must be submitted through the DIBBS platform using the provided link, and no set-aside provisions are designated for small, minority, or other specialized business categories, making the opportunity open to all eligible suppliers meeting the technical and delivery requirements for the specified components.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Raw Materials & Specialty ComponentsThe contract solicits the supply of high-grade alloy steels and specialty components required for the production of military-grade bearings, strictly adhering to specified defense standards. All materials must meet exacting technical and quality benchmarks to ensure performance under extreme operational conditions, with compliance to military specifications being non-negotiable. The work is intended for a subcontract arrangement under the ASC COMMODITIES DIVISION of the Department of Defense, with performance required at the location in Tracy, California, 95304-5000. The North American Industry Classification System code 331110 identifies the sector as iron and steel mill and steel product manufacturing, aligning the supplier’s expertise with the nature of the materials being procured. Interested parties must submit responses by the deadline of July 28, 2026, with the solicitation formally posted on July 23, 2026, providing a five-day window for proposal submission through the designated DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Raw Material Supply – Specialty Steel or Alloy for FastenersThe contract requires the supply of high-strength, corrosion-resistant steel or alloy bar stock or wire specifically formatted for use in lock bolt production, with all materials mandatory to meet established MIL-SPEC standards. Strict traceability protocols must be followed, ensuring full documentation of material origin, processing history, and inspection records throughout the supply chain to guarantee compliance and performance under demanding operational conditions. The materials must be engineered to sustain structural integrity and environmental resilience in defense-related fastener applications, with no tolerance for deviations from the specified technical requirements. This is a subcontract opportunity under the NAICS code 331110, issued by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance required at the designated location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. Participation is open to qualified suppliers capable of meeting military-grade specifications and traceability mandates without reliance on commercial-grade equivalents. All proposals must demonstrate proven capability in producing or supplying defense-certified alloy products, with an emphasis on quality control, documented compliance, and consistent delivery reliability.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Domestic Raw Material Supply (Iron/Steel Casting Stock)The contract requires the supply of domestic-grade iron or steel casting material suitable for use in the production of threaded pipe plugs, with all materials must be accompanied by certified mill test reports to verify composition and quality. The material must fully comply with the Buy American Act, ensuring that all production, processing, and assembly occur within the United States using domestically sourced components. The intended application is critical to defense-related fluid handling systems, necessitating strict adherence to material specifications and traceability standards. The solicitation is issued under the NAICS code 331110, indicating a focus on iron and steel foundries, and is classified as a subcontract opportunity managed by the Fluid Handling Division of the Department of Defense. Proposals are due by August 3, 2026, and performance must be carried out at the specified location in Barstow, California, with ZIP code 92311-5014. The contract emphasizes sourcing from U.S.-based suppliers and mandates full compliance with federal acquisition regulations regarding domestic content, with no set-aside designation specified. All submissions must demonstrate proven capability to deliver consistent, certified casting stock matching the technical and regulatory requirements outlined for defense-related manufacturing.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Metal Material Supply for Defense ComponentThe contract involves the supply of raw iron, steel, or alloy materials necessary for the fabrication of military-grade metal components, specifically the ANGLE RAMP FLOOR, which is critical for defense applications. The materials must meet stringent quality and specification standards to ensure structural integrity and operational reliability in military environments. The solicitation is issued as a subcontract under NAICS code 331110, indicating the focus on iron and steel mills and ferroalloy manufacturing, and is managed by the DLA Fleet Readiness Center under the Department of Defense. Performance of the contract will be executed at Cherry Point, North Carolina, with the zip code 28533-0021, which serves as the designated place of performance for delivery and inspection. The solicitation was posted on July 23, 2026, and responses must be submitted by July 31, 2026, creating a six-day window for qualified suppliers to submit proposals. No set-aside provisions are specified, meaning the opportunity is open to all eligible contractors without restrictions based on business size, ownership, or other categories. The absence of a point of contact in the data means vendors are advised to rely on the provided DIBBS link for submission details and procedural guidance. Given the nature of the end-use component, compliance with defense material specifications, traceability of raw material origins, and adherence to applicable military standards are critical requirements for any prospective supplier.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

Material Sourcing and Supply for Bearing ComponentsThe contract seeks qualified suppliers to provide domestic alloy steel, bronze, or composite liner materials specifically for use in the manufacturing of spherical bearings, ensuring full compliance with detailed technical specifications and federal sourcing regulations that prioritize domestic production. Materials must meet stringent quality and performance standards suitable for defense-grade applications, with all sourcing required to originate within the United States. The opportunity is issued as a subcontract under the Department of Defense’s ASC Commodities Division and falls under NAICS code 331110, indicating classification within the steel manufacturing industry. Performance of the work is designated for Cherry Point, North Carolina, with a delivery window ending on July 31, 2026, and all responses must be submitted by that deadline. Suppliers are expected to demonstrate proven capability in producing materials that align with defense procurement mandates and can consistently deliver to required volumes and timelines.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

CABLE ASSEMBLY, SPECIALThe contract pertains to a special purpose electrical cable assembly identified by part number SFV.L01.47 and NSN 5995-01-727-7502, with a quantity of ten units required. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced specifically by R and I numbers, and compliance is mandatory. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging standards, with marking following MIL-STD-129 and no special marking codes applied. The item is classified as a critical application item, requiring strict quality controls. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted in the sample lot unless otherwise stipulated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Delivery is due within 150 days from the order date, with FOB origin terms and inspection and acceptance occurring at the destination facility in New Cumberland, Pennsylvania. The unit of issue is each, with no quantity variance permitted. Transportation guidelines are referenced under DLAD Proc Notes C19 and C20, and the freight destination matches the parcel post address. The contract was issued under solicitation SPE4A6-26-T-09SX, with a response deadline in August 2026 and a required ship date of January 1, 2027, and original delivery date of April 29, 2027. Documentation for source approval, removal of government identification from rejected items, and compliance with all referenced standards is required, and the point of contact for inquiries is Angela Boyce of the Department of Defense’s ASC Commodities Division.

Current-Carrying Wiring Device Manufacturing

POSTED

about 20 hours ago

DEADLINE

WASHER, FLATThe contract is for the procurement of 200 flat washers identified by NSN 5310-00-596-7771, with a delivery requirement of 20 days after delivery order issuance. The solicitation number is SPE4A6-26-T-09PS, issued on July 26, 2026, with responses due by August 3, 2026. The item falls under NAICS code 332722 and is managed by the ASC Commodities Division within the Department of Defense. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Physical identification of the washers must comply with RQ017, ensuring adequate marking with required data. The primary point of contact is Michael Blain, reachable via email and phone for procurement inquiries.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

BOLT, INTERNALLY RELIEVThe solicitation requires the delivery of one unit of item 5306/12980817 within 180 calendar days from contract award for government-first article testing at Hill Air Force Base, with written notification of approval, conditional approval, or disapproval to follow within 180 days of receipt. The contractor must not supply covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and must comply with domestic sourcing restrictions under the Berry Amendment and Buy American Act, particularly since the threshold has been lowered to $150,000; non-domestic materials require explicit disclosure. All offers must include current dealer or distributor certification details and must not include items produced via additive manufacturing unless pre-approved by the contracting officer. Offerors are strongly encouraged to provide quantity ranges rather than fixed quantities to accommodate fluctuating requirements and avoid administrative delays, except for Auto IDC transactions. Small business joint ventures must submit required representations for applicable statuses. Contractors must register via DLA’s new AMPS system within two months to access the Vendor Shipment Module and maintain shipping capability, with WebService users needing schema updates by the specified deadline. Failure to comply with any clause, including submission of a “No Bid” notice for anticipated late responses, may impact eligibility. The contract is for 10 units of a bolt with NSN 5306-01-298-0817, to be delivered 526 days after award, with a response deadline of August 3, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

SCREW, MACHINEThe contract is for the procurement of 257 packages of machine screws, each package containing 50 screws, identified by NSN 5305-00-113-3732 and part number MS27039C0805, meeting the technical standards of NASM27039 Revision NR 6 and referenced quality assurance provisions including QAP-EQ003. The item is classified as a commercial item and a critical application item, requiring strict compliance with detailed quality, inspection, and packaging requirements. Quality conformance is governed by RQ006 and RQ009, with inspection and acceptance occurring at destination, and the manufacturer must provide a Certificate of Quality Compliance per DD Form 1423. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on their criticality. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, and marking must align with MIL-STD-130N unless otherwise directed, with no special marking required. Suppliers must be on the Qualified Suppliers List for Troop Support, and government identification must be removed from non-accepted items. Delivery is FOB origin with a 169-day delivery window, and no quantity variance is permitted. The Technical Data Package references specific revisions of commercial and military standards, and all quality and inspection procedures are tied to the DLA Master List of Technical and Quality Requirements. Contract Data Requirements Lists apply, and the manufacturer must adhere to tailored higher-level quality requirements including authorized Certificate of Conformance procedures unless overridden by a quality assurance letter. The unit of issue is PG, effective February 1, 2023, and the contract falls under solicitation SPE4A6-26-T-09PA, issued by the Department of Defense through the ASC Commodities Division. The point of contact is Lisa Harvie, and the place of performance is Hill AFB, Utah. The item is subject to covered defense information provisions under RD003 and requires full adherence to all referenced standards and procedures without exception.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

PIN-RIVETThe item specified is a threaded pin-rivet with NSN 5320-00-869-1498, with a total quantity of 36,805 units required under solicitation SPE4A6-26-T-09QW, which is a total small business set-aside classified under NAICS code 332510. The contract is issued by the Department of Defense through the ASC Commodities Division, with performance delivery expected at Cherry Point, North Carolina, within 275 days after delivery order. The solicitation was posted on July 26, 2026, with responses due by August 3, 2026, and the primary point of contact is Summer Allen, reachable via email and phone provided. Technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure to foreign persons regardless of location, including foreign national employees and overseas subsidiaries of U.S. firms. Access is restricted to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have been formally approved by DLA to handle such data. DFARS 252.225-7048 governs the handling and safeguarding of this information, and all contractors must comply with these requirements to be eligible for award or performance under this contract.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

BOLT, SHEARThe contract is for the procurement of 198 shear bolts with NSN 5306-01-223-9520 under solicitation SPE4A6-26-T-09SU, set aside exclusively for Service-Disabled Veteran-Owned Small Businesses. The contractor must deliver two units of the item within 120 calendar days from contract award to the Government’s receiving location at Fleet Readiness Center East in Cherry Point, North Carolina, for mandatory first article testing as required by FAR 52.209-4 and Alternate I. The Government will evaluate these units and provide written notification of conditional approval, approval, or disapproval within 180 calendar days of receipt. These first article units are not counted toward the production quantity and will be retained by the Government either as a manufacturing standard or destroyed during testing. The full order of 198 units must be delivered within 61 days after delivery order issuance, and Fast Pay is not applicable. The item is classified under NAICS 332722, and the contracting office is the ASC Commodities Division within the Department of Defense. All responses must be submitted by August 3, 2026, and the contractor must provide details of current dealer or distributor certification or accreditation, along with evidence of equivalent capability if proposing an alternative to the specified part.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

SCREW, CAP, SOCKET HEThe contract pertains to the procurement of 24 units of a screw, cap, socket head, identified by NSN 5305-01-688-0532 and part number FTH1085-10-2-11, supplied by Fastener Technology Corp. The item must comply with technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition type. Packaging must adhere to MIL-STD-2073-1E and DLA packaging standards, including marking per MIL-STD-129 with no special marking required, and palletization as specified in RP001. Inspection and sampling follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item is to be delivered FOB origin within five days, with no variance allowed in quantity, and shipped via the fastest traceable means—parcel post is prohibited. Delivery is directed to Tobyhanna Army Depot, Pennsylvania, with destination inspection and acceptance. The contract includes government-specific identifiers and shipping labels, and the point of contact for inquiries is Lisa Harvie. All requirements are governed by DLA directives and standard military specifications, with strict adherence to traceability, documentation, and compliance controls.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

SPACER, BALLThe contract is for the procurement of 186 units of a spacer, ball item with NSN 1440-00-961-5057 and part number 29-13703-3, sourced under solicitation SPE4A6-26-T-09RU. Delivery is required FOB origin within 117 days from the contract award, with a mandatory ship date of November 29, 2026, and an original delivery deadline of December 4, 2027. The item is designated as a critical application and must comply with all DLA Master List of Technical and Quality Requirements referenced by R-numbers, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and no government identification may be removed from non-accepted supplies. Unit of issue is each, with zero variance allowed in quantity. Inspection and acceptance occur at destination. Quality assurance is governed by tailored and non-tailored higher-level requirements, including ISO 9001:2015 for both manufacturers and non-manufacturers. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Measuring and test equipment must meet RT001 specifications. The item does not require Unique Identification per DFARS 252.211-7003(c)(1)(i). All packaging must be marked and labeled per MIL-STD-129 and delivered to the designated receiving facility in Tracy, CA, with transportation logistics governed by DLAD procedural notes C19 and C20. The solicitation was issued July 26, 2026, with responses due by August 3, 2026, under the NAICS code 334419, and is managed by the Department of Defense’s ASC Commodities Division.

Other Electronic Component Manufacturing

POSTED

about 20 hours ago

DEADLINE

SCREW, MACHINEThe contract pertains to the procurement of 10 machine screws with NSN 5305-01-057-0304 under solicitation SPE4A6-26-T-09RL, issued by the Defense Logistics Agency’s ASC Commodities Division. Technical data for this item is not currently available in an approved package due to proprietary or insufficient information, precluding competitive procurement. The requirement incorporates referenced technical and quality specifications from the DLA Master List of Technical and Quality Requirements, with version control determined by the solicitation issue or award date depending on acquisition size. Export control restrictions apply to associated technical data under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons or entities, including U.S. subsidiaries, and require compliance with DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of mandatory DLA training, and explicit authorization. Packaging must meet DLA standards and inspection and acceptance occur at the manufacturer’s origin. Item unique identification is not required as per customer directive, and government markings must be removed from rejected items. The delivery schedule requires fulfillment within 923 days after order placement, with performance occurring at Robins Air Force Base, Georgia. The solicitation closes on August 3, 2026, and is subject to cybersecurity maturity certification level 2 compliance for third-party assessors.

Aircraft Engine and Engine Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

SCREW, CAP, HEXAGON HThe contract specifies the procurement of 20 units of a hexagon cap screw, identified by NSN 5305-01-657-6697 and McMaster-Carr part number 92965A581, under solicitation SPE4A6-26-T-09RJ. Delivery is required within five days of award, FOB origin, with no quantity variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, including preservation method 33, dry climate control, and unit packaging coded as BV with intermediate container E5; marking must follow MIL-STD-129 with no special marking required. The product must be palletized per DLA packaging requirements, and shipping must use the fastest traceable means, excluding parcel post. The delivery address is Bldg 810 Dive Locker in Birmingham, AL, with a mandatory government use designation and specific tracking identifiers. The technical and quality requirements referenced throughout the contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on the acquisition size. Sampling protocols require adherence to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances accepted unless otherwise stated, and attributes are to be classified with specified verification levels or AQLs. The contract enforces strict compliance with DoD unit of issue standards and incorporates additional requirements including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Dana Barefoot, and the solicitation response deadline is August 3, 2026, with an original required delivery date of July 17, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

SCREW, MACHINEThis contract pertains to the procurement of machine screws identified by part number JWA82272 and NSN 5305-01-616-2120, with a unit of issue defined as a package containing 31 screws. A total of 39 packages are required, to be delivered FOB origin within 111 days, with no tolerance for quantity variance. Acceptance and inspection both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container details. Marking follows MIL-STD-129 without special codes, and palletization adheres to DLA packaging requirements. The screws must not contain or come into direct contact with mercury or mercury compounds except for specified functional uses such as batteries, lighting, sensors, or naval instrumentation, with additional containment requirements for portable devices. Sampling and quality verification must follow MIL-STD-1916 or an equivalent zero-based plan, with attributes assigned strict acceptance levels unless otherwise indicated. Documentation for source approval, removal of government identification from non-accepted items, and material compliance are all governed by referenced DLA master requirements. Delivery is directed to DLA Distribution Warner Robins at Robins AFB, Georgia, with the required ship date set for November 23, 2026, under solicitation SPE4A6-26-T-09SG.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

CAM, CONTROLThis contract pertains to the procurement of 13 units of Hamilton Sundstrand Corporation part number 772028, identified by NSN 3040-01-478-2006, under solicitation SPE4A6-26-T-09RD. Delivery is required within 166 days of award, with FOB origin terms and inspection and acceptance occurring at the destination point in San Diego, California. The contract enforces strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, and all items must be palletized accordingly. While Unit Unique Identification is not mandated, the item is classified as a Critical Application Item requiring high reliability. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes requiring verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment requirements, and any covered defense information is subject to applicable controls. The unit of issue is each (EA), with no tolerance allowed for quantity variance. The delivery deadline is set for August 29, 2027, though an earlier ship date of January 17, 2027 is requested. All documentation and compliance obligations are governed by DLA’s official requirements and referenced standards.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE