This Government Contract opportunity from Washington was posted on April 16, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Drag Chain Conveyor (Chain-vey) System

Closed

State & Local

Submission Closed05/14/2025, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924

New

Federal

ForkliftThe contract calls for the procurement of a new Bobcat D35C-9 medium-capacity diesel forklift manufactured in 2026 or later, or an equivalent model, designed for rugged outdoor and mixed terrain operations. The unit must have a rated lifting capacity of 7,000 pounds, a diesel engine delivering approximately 70 to 75 horsepower, and an operating weight between 11,500 and 12,500 pounds, with overall dimensions of roughly 110 to 115 inches in length and 48 to 50 inches in width. It must include 48-inch forks, a 24-inch load center, and a three-stage mast capable of lifting loads between 130 and 190 inches. Key equipment features include an enclosed cab with HVAC, a side-shifting fork positioner, standard hydraulic lift and tilt functions, ergonomic controls, and pneumatic tires sized at 28.9x15 front and 6.50x10 rear. Safety and operational enhancements are mandatory, such as an operator presence detection system, rearview camera, backup alarm, high-visibility mast, and automatic braking, all supported by a protective overhead guard. The contract requires delivery to a final destination with a ZIP code of 76544, and the final price must encompass standard manufacturer warranty coverage, as well as operator training for five personnel. Three copies of the operator, service, and parts manuals—either hardcopy or digital—are also to be provided. The solicitation is issued under number W911S226U3667 with a response deadline of July 20, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 333924. The contracting office is the Department of Defense, specifically the W6QM Micc-Ft Drum organization based in Fort Drum, New York, with Arthur West listed as the primary point of contact. The equipment is intended for use across construction sites, industrial yards, warehouses, and general logistics environments.

POSTED

DEADLINE

The Purchase of 1 Single Reach and 1 Double Reach Mono ForkliftThe procurement is for the Freight-on-Board destination delivery of two specialized forklifts—a single reach Crown Mono-lift RMD-6025-45 and a double reach Crown Mono-lift RMD-6025-32—to support FEMA’s Distribution Center Hawaii operations, with deliveries targeted to two distinct locations within the facility: Aiea, HI, and the East Range Annex in Building 6041. This solicitation, issued as a Request for Quote under number 70FB7026R00000024 by the Department of Homeland Security’s Incident Support SECTION(ISS70), is structured as a Total Small Business Set-Aside under FAR 19.5 with NAICS code 333924, restricted exclusively to qualified small businesses. The requirement mandates full compliance with commercial item acquisition regulations, specifically incorporating FAR 52.212-4 with Deviation 25-21 effective November 28, 2025, alongside attached clauses 52.212-1, 52.212-3, and 52.212-5. Offerors must submit detailed technical proposals demonstrating compliance with the technical specifications outlined in the two attached Statements of Work, alongside a realistic delivery plan ensuring performance within 300 days of award, and a fair and reasonable price quotation. Proposals must be submitted via email to the contracting officer and contract specialist by the revised deadline of July 15, 2026, at 1:00 PM ET, following strict formatting and content requirements including SAM registration, Unique Entity Identifier, and a formal agreement statement covering all terms and amendments. The evaluation process prioritizes technical compliance over delivery schedule, with both non-price factors combined carrying greater weight than price, and award will be made based on best value through a tradeoff analysis. Items must be delivered FOB destination, with title transferring upon government acceptance, and contractors are required to ensure dealer installation and stand-up on-site by an authorized Crown dealer. All deliverables must meet merchantable and fit-for-purpose warranties, with the government retaining full inspection rights and the authority to reject nonconforming items at no cost increase to the contract. Invoicing must adhere to Prompt Payment Act guidelines and 5 CFR Part 1315, with payments contingent upon accepted delivery at the designated locations. Contractors must also comply with a suite of federal statutes covering

Incident Support SECTION(ISS70)

POSTED

DEADLINE

Semi-TractorThe contract is for the procurement of a single modified commercial semi-tractor under a firm-fixed price purchase order, issued as a combined synopsis/solicitation under RFO Part 12 for commercial products and services. The semi-tractor is specifically configured to support the movement and in-field operation of a 53-foot DOT-compliant mobile instrumentation trailer with a 60,000 lbs GVWR, while also serving as a workspace for test personnel during transit. Key specifications include a Mid-Rise cabin with a minimum 50-inch depth optimized for three occupants, a front axle with leaf suspension rated at a minimum of 14,000 lbs GAWR, a tandem rear axle with air suspension rated at 40,000 lbs, a minimum 156-inch cab-to-axle distance to accommodate an external generator, front tires of at least 385mm width, and rear tires of 11R x 24.5 inches or equivalent. The delivery is due no later than November 30, 2026, with FOB Destination terms to Eglin AFB, Florida, and performance tied to the Technical Requirements Document dated June 19, 2026. The solicitation is a Total Small Business Set-Aside under FAR 19.5, limited to small businesses as defined by NAICS code 333924. All proposals must meet minimum technical requirements outlined in the TRD and are evaluated under a Lowest Price, Technically Acceptable (LPTA) source selection process, with Technical Capability and SPRS serving as pass/fail gates. Offerors must be registered in SAM and WAWF to be eligible for award and payment, and must submit representations and certifications either through SAM or with their quote. Compliance with cybersecurity requirements including safeguarding covered defense information (DFARS 252.204-7008 and 7012), cyber incident reporting, antiterrorism training, and whistleblower rights notification is mandatory. The contractor must adhere to Item Unique Identification and Valuation (DFARS 252.211-7003), MIL-STD-129 for shipping and storage labeling, and MIL-STD-130 for item marking with machine-readable data elements verified via approved AIT devices. Payment will be processed exclusively through WAWF using cost vouchers or invoice and receiving reports, depending on line item type, and

POSTED

DEADLINE

Columbus, OH MHE Electric ForkliftThe U.S. Defense Finance and Accounting Service is conducting market research to identify potential vendors capable of supplying an electric forklift for use at its Columbus, Ohio facility. This sources sought notice, identified by solicitation number 3003995 and posted on July 13, 2026, is not a formal invitation to bid but rather an effort to gather information on available products, capabilities, and market conditions. The equipment is classified under NAICS code 333924, which pertains to material handling equipment manufacturing, and there is no set-aside designated for small businesses or other categories. Responses are due by 4:00 p.m. Eastern Time on July 20, 2026. The forklift will be delivered and operated at the DFAS office located in Columbus, Ohio, with a ZIP code of 43213. The primary point of contact for inquiries is Coleman Dieger, reachable via phone at 667-894-8489 or email at dcoleman.dieger.civ@mail.mil. Interested vendors should review the detailed requirements through the official SAM.gov link provided, as technical specifications, performance expectations, and delivery terms will be determined based on feedback gathered during this market research phase. All submissions must be received by the stated deadline to be considered for potential inclusion in future procurement planning.

Defense Finance And Accounting Svc

POSTED

DEADLINE

ForkliftThe contract seeks a new, 2026 or newer Bobcat D35C-9 medium-capacity diesel forklift or an equivalent model designed for outdoor and mixed-terrain material handling, with a rated lifting capacity of 7,000 pounds and a power output between 70 and 75 horsepower. The unit must be diesel-powered, measure between 110 and 115 inches in length without forks, and have a width of 48 to 50 inches, with an operating weight ranging from 11,500 to 12,500 pounds. It must feature a 24-inch load center, a 3-stage mast capable of lifting between 130 and 190 inches, and include 48-inch forks. Pneumatic tires are required, with front tires sized 28.9x15 and rear tires at 6.50x10, along with an enclosed cab, full HVAC system, side-shifting fork positioner, and standard hydraulic lift and tilt functions. Ergonomic controls and comprehensive safety features including operator presence detection, a rear-view camera, backup alarm, high-visibility mast, and automatic braking are mandatory to ensure safe operation in demanding environments such as construction sites, industrial yards, and logistics facilities. The final price must encompass delivery to the specified endpoint at 76544, along with the manufacturer’s standard warranty, and include operator training for five personnel. Three copies each of the operator, service, and parts manuals—either hard or digital format—are required. This procurement is a total small business set-aside under NAICS code 333924, administered by the Department of Defense through the W6QM Micc-Ft Drum office located in Fort Drum, New York. The solicitation, numbered W911S226U3664, was posted on July 10, 2026, with a response deadline of July 17, 2026. Primary point of contact is Arthur West, reachable via email at arthur.j.west2.civ@army.mil or phone at 254-287-1574.

W6QM Micc-Ft Drum

POSTED

4 days ago

DEADLINE

in 3 days

General Info

Agency

Washington → South Puget Sound Community CollegeView Agency

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery ManufacturingView NAICS

Place of Performance

WA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 16

subcontract

Response DeadlineMay 14

Deadline has passed

Submission Closed

05/14/2025, 12:00:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyWashington → South Puget Sound Community College

ContactsNo contacts available

OfficeN/A

Organization / Agency

Washington → South Puget Sound Community College

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Supply of a Hog Slat Chain-vey system to transfer grain from supersack to silo and into the mill room.