Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DRAPE, SURGICAL

Active
SPE2DH-26-T-5907Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation is for the procurement of sterile, disposable surgical drapes designed for general surgery. The required items are small, transparent plastic sheets measuring 1-1/4 by 17-3/8 inches with an adhesive area and a protective liner. Each unit must be individually sealed and packaged according to commercial standards to prevent damage during transit. All materials must strictly adhere to Medical Marking Standard No. 1, which supersedes previous military marking standards. The contract is issued by the Department of Defense Medical Supply Chain for delivery to Cannon Air Force Base. The procurement includes specific technical and quality requirements as outlined in the DLA Master List, as well as guidelines for the removal of government identification from non-accepted supplies. The delivery timeline is set for 20 days after the order is placed, and the solicitation is categorized under NAICS code 423450.

General Info

DoD procurement of sterile disposable surgical drapes for delivery to Cannon Air Force Base.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIIN FSHView Agency

NAICS

423450 - Medical, Dental, and Hospital Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

224 W D L INGRAM BLVD BLDG 1408, CANNON AFB, NM, 88101-5009, USA

Set-Aside

NONE

Documents

(1)

SPE2DH-26-T-5907.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIIN FSH
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIIN FSH
View Agency Profile
Office AddressUSA
Contacts
Tina Vu
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DRAPE,SURGICAL
DRAPE, SURGICAL, SMALL SHEET, PLASTIC<(>,<)>
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
SMALL SHEET; TRANSPARENT; DISPOSABLE; STERILE; 1-1/4 X 17-3/8 IN. ADHESIVE AREA; W/PROTECTIVE LINER; INDIVIDUALLY SEALED; FOR USE IN GENERAL SURGERY
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6530-01-047-9697 Quantity: 1 PG Purchase Request: 7017807469QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 423450
New
DIBBS
TEST SET, WATER TURB
Solicitation # SPE2DH-26-T-5922
This contract is for the procurement of four water turbidity meter test sets under solicitation SPE2DH-26-T-5922 for the Department of Defense. The devices must comply with ISO 7027, featuring an infrared LED light source and the ability to measure turbidity from 0 to 1000 FTU. Key technical specifications include a weight of 350 grams, a four-key interface, and circuitry that automatically stores and retrieves the last calibration data. Each unit is supplied with a measurement cuvette, cap, four 1.5 V AA batteries, and an instruction manual. The order is subject to strict quality and delivery requirements, including a five-day delivery window after order. The items have a non-extendable shelf life of six months, with a requirement that no more than three weeks elapse between the date of manufacture and delivery. Packaging must meet commercial medical standards and be marked according to Medical Marking Standard No. 1. The contract also incorporates DLA master technical requirements and specific guidelines regarding the removal of government identification from non-accepted supplies.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TABLE, SURGICAL INST
Solicitation # SPE2DH-26-T-5733
The contract specifies the procurement of two surgical anesthesia utility tables, each with a single drawer made of stainless steel, rectangular in shape, measuring 20 inches in width, 16 inches in depth, and 34 inches in height, equipped with 3-inch wheel casters. These units are destined for federal medical use under the NSN 6530-00-710-0220 and must be delivered within 170 days of award. Packaging requirements are strictly defined: each unit must be sealed in a commercial container that prevents damage or breakage, with exterior shipping containers compliant with commercial standards and capable of safe transport at the lowest cost to the delivery point in New Cumberland, PA. All items must be labeled in accordance with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and bidders must clearly indicate the source and part number being supplied. The contract references DLA’s Master List of Technical and Quality Requirements, indicating adherence to specific technical and quality criteria identified by R or I numbers, and incorporates DLA’s packaging guidelines. Government identification must be removed from non-accepted supplies, and all bids must respond to the solicitation number SPE2DH-26-T-5733 with full compliance to the stated procurement rules and deadlines.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 423450
New
DIBBS
DRAPE, SURGICAL
Solicitation # SPE2DH-26-T-5908
This contract is for the procurement of sterile, disposable surgical drapes intended for emergency medical care. The drapes are made of plastic, measuring 17-5/8 by 35-3/8 inches with an adhesive center area of 18 by 24 inches. Each unit is packaged in a polyethylene envelope, and the unit of issue is a package of 10. The requirement specifies a total quantity of two packages under purchase request 7017811300, with a strict delivery timeline of five days after the order. The materials must adhere to Medical Marking Standard No. 1 and follow specific DLA packaging requirements to ensure safe delivery and protection from damage. The product must have a total shelf life of 36 months, with a requirement that no more than six months have passed from the date of manufacture to the date of delivery to the government. This solicitation is managed by the Department of Defense Medical Supply Chain and is subject to the technical and quality requirements outlined in the DLA Master List.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 423450
New
DIBBS
TEST TUBE, BLOOD COLLEC
Solicitation # SPE2DH-26-T-5903
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
SODIUM CHLORIDE INJ
Solicitation # SPE2DP-26-T-4593
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
DIBBS
TEST KIT, STREPTOCOCCI
Solicitation # SPE2DS-26-T-328S
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
International
Supply of Reverse Osmosis System Spare Parts & Consumables
Western Regional Health Authority

POSTED

about 23 hours ago

DEADLINE

N/A
View Details
NAICS: 423450
New
DIBBS
LAMP, LONG WAVE UV, EXAM
Solicitation # SPE2DH-26-T-5895
The contract solicits one unit of a Long Wave UV Examination Lamp with specific technical parameters: dimensions of 9x4x3 inches, 4 watts of power, operating at 50/60 Hz and compatible with both 120 and 230 volts, manufactured by SPECTRO-UV, LLC under part number EN-140. The item is identified by NSN 6530-01-292-7700 and is to be delivered to Whiteman Air Force Base, Missouri under FOB Destination terms within five days of order receipt. Packaging and marking must strictly adhere to commercial standards as defined in the procurement documentation, using sealed unit containers to prevent damage, and exterior shipping containers suitable for safe transport by common carrier at lowest cost. All materials must be marked per Medical Marking Standard No. 1, which supersedes MIL-STD-129, and any hazardous components must be labeled in compliance with 29 CFR 1910.1200. The lamp is subject to quality requirements referenced in the DLA Master List of Technical and Quality Requirements, and the acquisition is governed by the DLA Master Solicitation for Automated Simplified Acquisitions Revision 105. All offers must be submitted via the DIBBS portal by August 17, 2026, with no evaluation of proposals involving additive manufacturing or those lacking a required Safety Data Sheet. Offers must also disclose use of non-domestic materials and confirm compliance with prohibitions on covered telecommunications equipment. Payment must be processed electronically through Wide Area WorkFlow, and receiving reports and invoices must be submitted per DFARS Appendix F guidelines. Contractual clauses incorporate mandatory federal regulations including cybersecurity safeguards per NIST SP 800-171, prohibition of hexavalent chromium, whistleblower protections, and restrictions on arbitration agreements. The government may utilize HUBZone price evaluation preferences for award, and while the solicitation is not a small business set-aside, contractors must validate their size status in SAM and submit current representations. Inspection and acceptance occur at the destination point under FAR 52.246-2, and the contractor must comply with all relevant packaging, labeling, and safety standards, including DFARS 252.223-7001 for hazard warnings. Deviations in contracting clauses related to system for award management, subcontracting, contract type, and other provisions are in effect as of February 2
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 423450
New
International
Supply and Delivery of Health and Wellbeing Items for Health and Safety Branch, Jamaica Customs Agency
Solicitation # GOJEP-7933897
JCA Project and Initiatives Implementation

POSTED

1 day ago

DEADLINE

N/A
View Details
NAICS: 423450
New
International
Mohawk Medbuy Corporation - Notice of Planned Procurement - CW28275 Anaesthesia Gas Machines - RFP
Solicitation # AB-2026-05617
Mohawk Medbuy Corporation is leading a procurement initiative on behalf of its CAPsource Members for a range of anaesthesia gas machines, including advanced, general, and basic models, as well as MR conditional units. The contract term spans three years with the possibility of two optional two-year extensions, bringing the potential total duration to seven years. The solicitation, identified as AB-2026-05617, was posted on August 10, 2026, with responses due by September 22, 2026, at 8:00 PM. All submissions must be completed and finalized through the Bonfire platform, where registration is mandatory, and proposers are strongly advised to begin the upload process well in advance of the deadline to avoid technical issues. Notifications for this procurement are also published on Biddingo, and all questions must be raised and managed within Bonfire to ensure compliance and transparency, as required by public sector procurement regulations. The place of performance is designated as Alberta, and inquiries should be directed to Marsha Van Groningen, Director of Strategic Sourcing, at the provided email address. Proponents are responsible for actively monitoring both Biddingo and Bonfire for updates, additional information, or related sourcing events.
Mohawk Medbuy Corporation

POSTED

1 day ago

DEADLINE

in about 1 month
View Details
NAICS: 423450
New
SLED
Medical Supply Kit Restocking (Full and Small Kits)
Purchasing

POSTED

1 day ago

DEADLINE

in 16 days
View Details
NAICS: 423450
New
SLED
Replacement Batteries and Electrode Pads Supply
Purchasing

POSTED

1 day ago

DEADLINE

in 16 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIIN FSH

Same awarding agency

NAICS: 333998
New
DIBBS
CALIBRATOR, AIR SAMP
Solicitation # SPE2DH-26-T-5916
This contract is for the procurement of three primary standard pump calibrators designed for the occupational health and safety industry. These devices are used to calibrate personal air samplers and volumetric instruments, featuring a flow range of 50 to 5000 ml/min and specific accuracy ratings for volumetric and standardized readings. Each unit must include a power adapter, BIOS optimizer software, serial cable, leak test caps, a manual, and a NIST-traceable calibration certificate. The supplier must adhere to strict packaging and marking standards, specifically Medical Marking Standard No. 1 and MIL-STD-130 for Item Unique Identification. Compliance with DFARS 252.211-7003 is required, and items must be shipped in suitable sealed unit containers within commercial exterior packaging to ensure safe delivery. The delivery timeline is set for 85 days after the order is placed, and bidders are required to specify the source and part number of the equipment being supplied.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
WATER SAMPLING TEST RE
Solicitation # SPE2DH-26-T-5902
This contract is for the procurement of two packages of coliform water sampling test reagents, specifically designed for 100 ml water samples. Each unit of issue consists of 200 plastic snap-pack powdered reagents and one color comparator used for field quality assurance. The reagents identify total coliform through a yellow color change and E. coli through a yellow or fluorescent result. The items must have a non-extendable shelf life of 12 months, with no more than two months elapsed from the date of manufacture to the date of delivery. All supplies must adhere to DLA packaging requirements, Medical Marking Standard No. 1, and specific technical quality requirements. Delivery is required within five days after receipt of the order.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
STERILIZATION AIR REMO
Solicitation # SPE2DH-26-T-5911
This contract is for the procurement of disposable sterilization air removal test packs, identified by NSN 6530-01-333-9719 and part number 1233LF from Solventum US LLC. The order consists of two packages, with each package containing 30 units. These devices are FDA-regulated and are designed for daily operational checks of air removal. The items must have a shelf life of 24 months, and no more than five months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging and marking must adhere to Medical Marking Standard No. 1 and ASTM D3951, with all containers clearly labeled with the lot control number and manufacture date. Delivery is set as FOB Destination to the Carrier Outfitting Material Support Center in Suffolk, Virginia, with a required delivery timeframe of five days after the order. The contract incorporates DLA master list technical and quality requirements and specifies that shipments must be sent via the fastest traceable means, explicitly prohibiting the use of parcel post.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339114
New
DIBBS
TESTER, PULP, DENTAL
Solicitation # SPE2DH-26-T-5720
The contract is for a single unit of a DENTAL PULP VITALITY TESTER, specifically the DIGITEST 3 model powered by a 9-volt battery, which includes four autoclavable probe tips: one standard long, one standard short, one labial, and one lingual, along with a ground wire and clip. The item is identified by NSN 6520-01-706-0601 and is to be delivered within 20 days of award. The solicitation number is SPE2DH-26-T-5720, issued under a federal procurement with a NAICS code of 339114, and is managed by the Department of Defense’s Medical Supply Chain. Bidders must specify the exact source and part number being supplied. Technical and quality requirements referenced under R and I numbers, packaging standards under RP001, and requirements for removing government identification from non-accepted supplies under RQ011 are applicable. The solicitation also notes that covered defense information may apply. Proposals are due by August 10, 2026, and the primary point of contact is Tina Vu, reachable via email and phone provided.
Dental Equipment and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
DIBBS
HYDROMETER, GRADUATE
Solicitation # SPE2DH-26-T-5915
This contract is a solicitation for the procurement of two graduate scale hydrometers under solicitation number SPE2DH-26-T-5915. The required equipment must be constructed from soda lime glass, be lead and mercury free, and feature an enclosed thermometer to monitor liquid temperature. Technical specifications include a specific gravity range of 39-51 with 0.1 increments, adhering to ASTM number 6H and NIST certifications. The order is issued by the Department of Defense Medical Supply Chain and requires delivery within 20 days after the order is placed. Suppliers must comply with DLA packaging requirements, ensuring each unit is in a sealed container and marked according to Medical Marking Standard No. 1. Bidders are required to specify the source and part number for the items provided under NSN 6630-01-687-6909.
Other Measuring and Controlling Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
EXERCISER, TOTAL BODY, B
Solicitation # SPE2DH-26-T-5904
This solicitation is for the procurement of one Assault Fitness Airbike Elite, model ABK865, a total body bicycle exerciser. The equipment features a 27-inch steel fan, a programmable LCD console with performance tracking, eight pre-programmed workouts, and an on-board ANT+ radio. It is designed for users between 5 feet and 6 feet 4 inches in height with a maximum weight capacity of 350 lbs, finished in charcoal color with an ergonomic design. The contract is issued by the Department of Defense Medical Supply Chain under solicitation number SPE2DH-26-T-5904, with delivery required within 20 days after order. Performance will take place at Edwards AFB. Bidders must comply with DLA packaging requirements and technical quality standards, specifically referencing RA001, RP001, RQ011, and RD003. Prospective suppliers are required to specify the source and part number for the item associated with NSN 6530-01-686-1694.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334510
New
DIBBS
PHANTOM, COMPUTED TOMOG
Solicitation # SPE2DH-26-T-5691
The contract requests a single unit of a Phantom Computed Tomography Scanner with a 50-slice thickness and reference specifications, identified by NSN 6525-01-701-0733, to be delivered within five days of award to Fort Bragg, North Carolina. The item is classified under NAICS code 334510 and is part of a federal procurement under the Department of Defense’s Medical Supply Chain FSH. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the controlling revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. The bidder must clearly identify the source and part number being offered. The solicitation, identified as SPE2DH-26-T-5691, was posted on August 2, 2026, with responses due by August 10, 2026, and is managed by Tina Vu at the provided contact information. Covered defense information may apply, and the item is a critical support component for end-use equipment within the defense medical supply chain.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339113
New
DIBBS
LITTER, FOLDING, RIGI
Solicitation # SPE2DH-26-T-5913
This contract is for the procurement of two black decontamination folding rigid pole litters. Each unit features a 1.5 inch heavy gauge aluminum frame with a chemical and chip resistant coating and a monofilament polypropylene bed that is flame and chemical resistant. The equipment is designed to meet US Army field decontamination standards for HD, GD, and VX, as well as US Air Force airworthiness and NATO requirements, including specific tests for vibration, altitude, and rapid decompression. The items are classified as Commercial Off The Shelf products and are regulated by the FDA under Class I requirements, necessitating compliance with registration, listing, and labeling standards. The supplier must provide the source and part number and ensure marking follows Medical Marking Standard No. 1. Delivery is required within 20 days after the order is placed.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 339113
New
DIBBS
HOLDER, STERILIZATIO
Solicitation # SPE2DH-26-T-5912
This solicitation, issued by the Department of Defense Medical Supply Chain FSH under solicitation number SPE2DH-26-T-5912, is for the procurement of two desktop-sized sterilization holders for biohazard disposal bags. The required items must measure 5 by 3 by 8 inches and adhere to NSN 6530-01-460-8451. Delivery is required within 5 days after receipt of order, with performance located in Suffolk, Virginia. The contract mandates compliance with DLA packaging requirements and technical quality standards as specified in the DLA Master List. Bidders are required to provide the specific source and part number being supplied. The response deadline for this federal acquisition is August 18, 2026, and the primary point of contact is Tina Vu.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
PIPET, TRANSFER
Solicitation # SPE2DH-26-T-5909
This contract is for the procurement of disposable plastic transfer pipettes under solicitation SPE2DH-26-T-5909 for the Department of Defense Medical Supply Chain. The items are six inches in length with a 7.5ml capacity and a 3.5ml bulb draw, intended for use in chemistry, urinalysis, and blood banking. The order consists of two packages of 500 units each, with a required delivery timeframe of 20 days after receipt of the order. Compliance with DLA technical and quality requirements is mandatory, specifically adhering to DLA packaging requirements for medical acquisitions. Products must be shipped in sealed unit containers and commercial exterior packaging to prevent damage during transit. Additionally, all materials must be marked according to Medical Marking Standard No. 1, and the contract is subject to regulations regarding covered defense information and the removal of government identification from non-accepted supplies.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details