Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DRESSING, CHEST SEAL WO

Active
SPE2DS-26-T-333TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of chest seal wound dressings under solicitation SPE2DS-26-T-333T for the Department of Defense. The item is a twin pack of chest seals featuring three-channel pressure relief vents designed to prevent air from entering the chest cavity during inspiration while allowing air and blood to escape during exhalation. Each unit is designed for single-step peel-and-apply use with a red-tip tab and is packaged in a perforated foil pack to allow for individual dressing access. The deployed seal size is 6 by 6 inches, and the total weight per unit is 2.5 ounces. The procurement specifies a quantity of four packages under purchase request 7017530552 with a delivery requirement of 20 days after the order. Key quality and compliance standards include a non-extendable shelf life of 60 months, with a requirement that no more than 9 months have elapsed from the date of manufacture to the date of government delivery. The contract is subject to DLA packaging requirements and covered defense information regulations, with performance located in Mooresville, NC.

General Info

DoD procurement of four chest seal twin packs for delivery within 20 days.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

456199 - All Other Health and Personal Care RetailersView NAICS

Place of Performance

720 NORTH BROAD STREET, MOORESVILLE, NC, 28115-9551, USA

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-333T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUSA
Contacts
Mary-Kathryn Donahue
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DRESSING,CHEST SEAL WOUND
DRESSING, CHEST SEAL WOUND
.
CHEST SEAL DRESSING; TWIN PACK; 3-CHANNEL PRESSURE RELIEF VENTS; TWO
CHEST SEALS FOR THE TREATMENT OF BOTH ENTRY/EXIT OR MULTIPLE
PENETRATING INJURIES; 3-VENT CHANNELS PREVENT AIRFLOW INTO THE CHEST
CAVITY DURING INSPIRATION WHILE ALLOWING AIR TO ESCAPE THROUGH THE VENT
CHANNELS DURING EXHALATION; VENT CHANNELS ALLOW
BLOOD TO ESCAPE AND PROVIDES A BACKUP FAIL-SAFE SYSTEM EVEN IF TWO OF
THE THREE CHANNELS BECOME OBSTRUCTED, THE VENT WILL REMAIN FULLY
OPERATIONAL; LARGE RED-TIP TAB FOR SINGLE STEP, PEEL-AND-APPLY
APPLICATION THAT ALLOWS FOR THE BURPING OF THE WOUND IF NECESSARY; FOIL
PACKAGE WITH RED-TIP TEAR NOTCHES; PERFORATED PACKAGING ALLOWING
RESCUERS TO OPEN ONLY ONE DRESSING AT A TIME AS NEEDED; PACKAGED FOLDED:
H 7.5 IN BY W 4.5 IN BY D 0.25 IN; UNFOLDED: L 7.5 IN BY W 9 IN BY D
0.13 IN; CHEST SEAL SIZE WHEN DEPLOYED: H 6 IN BY W 6 IN; WEIGHT, 2.5 OZ
.
UNIT OF ISSUE: PACKAGE/2EACH
..
SHALL HAVE A SHELF LIFE OF 60 MONTHS.
NOT MORE THAN 9 MONTHS SHALL HAVE ELAPSED FROM
DATE OF MANUFACTURER TO DATE OF DELIVERY TO THE
GOVERNMENT.
.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
..
RS023: Shelf-life requirement RS001 for a TYPE I (CODE S) item with a shelf life of 60 months (non-extendable) applies to this item.
.. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
..
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
..
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
..
ADEQUATE DATA FOR THE NSN/Part Number: 6510-01-642-6212 Quantity: 4 PG Purchase Request: 7017530552QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 456199
New
DIBBS
MAROPITANT CITRATE
Solicitation # SPE2DP-26-T-4624
This contract is for the procurement of Maropitant Citrate 160mg veterinary tablets, supplied in blister packs of four tablets per perforated sheet. The unit of issue is a package of four tablets, and the item is subject to a non-extendable shelf life of 36 months. Storage must be maintained at a controlled room temperature between 20-25 degrees Celsius, with allowable excursions from 15-30 degrees Celsius. The drug is FDA regulated and must be marked according to Medical Marking Standard No. 1. Packaging must be commercial and sealed to protect contents from damage during shipment to the destination in Germany. The contract specifies a delivery timeframe of 88 days and requires adherence to DLA packaging and quality requirements, including specific guidelines for medical acquisitions and the removal of government identification from non-accepted supplies.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
DRESSING, CHEST SEAL WO
Solicitation # SPE2DS-26-T-329G
This contract is for the procurement of 10 units of chest seal wound dressings under solicitation SPE2DS-26-T-329G. The product features a three-channel pressure relief vent system designed to allow air and blood to escape the chest cavity during exhalation while preventing airflow during inspiration. The dressing utilizes advanced adhesive technology for secure sealing in adverse conditions and includes a large red-tip tab for easy application and wound burping. Each unit measures 6 by 6 inches when deployed, weighs 1.37 ounces, and is supplied in a 7.75 by 7.75 inch foil package. The items must have a non-extendable shelf life of 60 months, with no more than nine months elapsed from the date of manufacture to the date of delivery to the government. All packaging and labeling must comply with Medical Marking Standard No. 1 and DLA packaging requirements, ensuring each unit is protected in a sealed container within commercial shipping containers. Delivery is required within 20 days after the order is placed, with the place of performance located at Fort Hood.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
PAPER, MEDICAL RECORDIN
Solicitation # SPE2DS-26-T-329W
This solicitation from the Department of Defense Medical Supply Chain involves the procurement of medical recording paper for monitor defibrillators, specifically for the Propaq MD and X series. The requirement is for one box containing six units under NSN 6515-01-628-6597, with a delivery deadline of 20 days after the order is placed. The place of performance is designated as Dyess AFB. Suppliers must adhere to strict commercial packaging and packing standards to ensure the protection of contents during transit. All materials must be marked according to Medical Marking Standard No. 1, which supersedes MIL-STD-129. Bidders are required to specify the source and part number being supplied and must comply with DLA technical and quality requirements, including the removal of government identification from any non-accepted supplies.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5942
This solicitation from the Department of Defense Medical Supply Chain issued by the Defense Logistics Agency is for the procurement of one box of endodontic gutta percha points. The required supplies must be color coded, 30mm in length, and consist of assorted sizes ranging from 45 to 80, with each box containing 120 units. The item is identified by NSN 6520-01-643-3521 and is associated with purchase request 7017429473. The contract mandates a delivery timeframe of five days after the order is placed and requires the bidder to specify the source and part number being supplied. Compliance with DLA packaging requirements, the removal of government identification from non-accepted supplies, and specific technical and quality requirements outlined in the DLA master list is mandatory. The place of performance is located at JBER, zip code 99506-4400.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 456199
New
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5905
This solicitation from the Department of Defense Medical Supply Chain FSH is for the procurement of one box of 120 endodontic gutta percha points. The required supplies must be color coded, 30mm in length, and consist of assorted sizes ranging from 45 to 80. The contract specifies NSN 6520-01-643-3521 and requires delivery within 81 days after the order date. The agreement is subject to several DLA technical and quality requirements, including specific packaging standards and the removal of government identification from non-accepted supplies. Bidders are required to specify the source and part number being supplied. The solicitation was posted on August 11, 2026, with a response deadline of August 17, 2026, and the place of performance is located in APO 96260-5479.
MEDICAL SUPPLY CHAIIN FSH

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
KETAMINE INJECTION, VET
Solicitation # SPE2DP-26-T-4619
This contract is for the procurement of five units of Ketamine Hydrochloride Injection, USP, specifically for veterinary use. The product is supplied in 10 ml multiple-dose vials and is classified as a DEA Schedule C-III controlled substance. It must be stored in a vault at a medically controlled room temperature and carries a non-extendable shelf life of 24 months. The order is managed under solicitation SPE2DP-26-T-4619 with a required delivery date of July 20, 2026, and a delivery window of 20 days. Shipping is FOB destination to Kadena AB in Okinawa, Japan. Compliance requirements include adherence to Medical Marking Standard No. 1 and DLA packaging requirements. As an FDA-regulated drug, the procurement process requires confirmation from a product specialist and strict adherence to technical and quality standards.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
INTUBATION KIT
Solicitation # SPE2DS-26-T-329V
Solicitation SPE2DS-26-T-329V is a federal requirement issued by the DLA Troop Support Medical Supply Chain MD SURG FSF for the procurement of one disposable intubation kit (NSN 6515-01-632-4831). Each kit must contain one ET tube with stylette, one 10 cc syringe, one Velcro tube tie, and one pack of surgical lubricant. The items must have a shelf life of 24 months, with no more than 3 months elapsed from the date of manufacture to the date of delivery to the government. Delivery is required within 20 days after the order date, with the destination and acceptance point located at Cannon AFB, New Mexico. The contract mandates strict adherence to packaging and marking standards, including ASTM D3951 and MIL-STD-129, and requires labels to display the NSN, manufacturer CAGE code, manufacture date, expiration or retest date, and the contract or lot number. Technical and quality requirements are governed by the DLA Master List, and hazardous materials must be labeled according to the Hazard Communication Standard unless otherwise specified. Invoicing and payment will be processed electronically through the Wide Area Workflow (WAWF) system. All quotes must be submitted via the DLA Internet Bid Board System (DIBBS).
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
TETRACAINE HYDROCHLORI
Solicitation # SPE2DP-26-T-4586
Tetracaine Hydrochloride Ophthalmic Solution, a sterile topical anesthetic with a 0.5% active ingredient and high viscosity, is procured in 5 mL bottles for use in producing surface anesthesia of the eye under RX-only status. The product has a total shelf life of 24 months, with a mandatory minimum of 21 months remaining at the time of receipt by the first government activity. Storage must be maintained at room temperature between 15–30°C (59–86°F), protected from light, and the container must remain tightly closed; the solution must not be used if crystals, cloudiness, or discoloration are present. Packaging and labeling must strictly follow Medical Marking Standard No. 1A dated February 4, 2013, superseding all references to MIL-STD-129. Each unit must be sealed in a suitable container to protect against damage, and shipping containers must ensure safe delivery via common carrier at the lowest rate. The material is not classified as hazardous under FED-STD-313 and must be commercially packaged per ASTM D3951, though all DLA Master List of Technical and Quality Requirements take precedence. Palletization must comply with DLA Packaging Requirements for Procurement (RP001). The contract mandates delivery of two bottles to Fort Stewart, Georgia, within five days of order placement, with FOB destination terms and zero variance allowed in quantity. Inspection and acceptance occur at the destination point. All packaging and labeling must meet medical marking standards and include proper identification per NSN 6505016414148 and NDC numbers associated with AmerisourceBergen Drug Corp and Bausch & Lomb Incorporated. Electronic invoicing through WAWF is required, and the contractor must comply with all applicable DFARS and FAR clauses, including safeguarding covered defense information, prohibiting hazardous substances, ensuring whistleblower rights, and adhering to cybersecurity and supply chain integrity requirements. The solicitation was issued by DLA Troop Support Medical Supply Chain on August 10, 2026, with quotes due by August 17, 2026, and must be submitted through the DIBBS portal.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
New
DIBBS
SODIUM CHLORIDE IRR
Solicitation # SPE2DP-26-T-4583
The contract solicits sodium chloride irrigation solution at 0.9% concentration in 1,000 mL bottles, packaged in units of 12 bottles per pack (U/I PG), with a NSN of 6505014624194. Delivery is required within 20 days of order placement to Fort Stewart, Georgia, under FOB Destination terms, with zero variance permitted in quantity. Packaging must adhere to commercial standards as specified, with each unit sealed in a protective container and shipped in commercial exterior containers suitable for safe, low-cost delivery via common carrier, including export packaging where necessary. All labeling and marking must comply with the Medical Marking Standard No. 1 (MMS No. 1), which supersedes MIL-STD-129 for medical acquisitions; this standard governs not only physical labeling but also incorporates modern logistics requirements such as barcoding and traceability. Preservation and packaging follow MIL-STD-2073-1E, and the product has a non-extendable shelf life of 36 months. The item is sourced from recognized manufacturers including Baxter Healthcare Corporation and ICU Medical Sales, Inc., with specific P/N and NDC codes identified. The contract incorporates a comprehensive set of federal and defense regulatory clauses, including cybersecurity protections under FAR 252.204-7012, requirements for safeguarding covered defense information, and compliance with NIST SP 800-171 controls. Ethical obligations include whistleblower rights, prohibitions on mandatory arbitration, and restrictions on trafficking in persons. Hazardous materials labeling must align with OSHA’s Hazard Communication Standard, and radioactive material handling requires additional notification and MIL-STD-129 labeling under specific conditions. Commercial delivery is mandated by FAR 52.213-4, with acceptance and inspection conducted at the destination. Payment must be processed electronically via Wide Area WorkFlow (WAWF), and all offerors must be registered in SAM. Small business representation is governed by FAR 52.219-28 Alternate I, and the solicitation excludes set-asides. Cybersecurity, transportation, and material safety requirements are strictly enforced, with violations subject to contract penalties. All submissions must be made electronically through DIBBS by the August 17, 2026 deadline, with no paper or alternative submission methods accepted.
MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

3 days ago

DEADLINE

in 5 days
View Details
NAICS: 456199
DIBBS
POINT, ENDODONTIC
Solicitation # SPE2DH-26-T-5825
The contract is for the procurement of Point Endodontic Gutta Percha Points, NSN 6520-01-643-3521, in quantities of one box containing 120 units, each 30mm in length and color-coded in sizes 45 to 80. Delivery is required within 20 calendar days after the date of issue, with FOB Destination terms applying to two specified locations: APO AE 09094-3219 for parcel post shipments and Ramstein, Germany for freight deliveries. The solicitation, issued under SPE2DH-26-T-5825, is open for responses through the DLA Internet Bid Board System, with a deadline of August 12, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, specifically referencing RA001, RP001, and RQ011, which mandate compliance with DLA packaging standards, removal of government identification from non-accepted items, and adherence to MIL-STD-2073-1E for packaging and Medical Marking Standard No. 1 for labeling, superseding MIL-STD-129 for medical items. All packaging must protect against damage and environmental degradation, with preservation methods and materials to be determined by the contractor. Hazardous materials, if any, require compliance with OSHA’s Hazard Communication Standard, including submission of Safety Data Sheets and proper labeling prior to award. Cybersecurity obligations under 252.204-7012 require implementation of NIST SP 800-171 controls to safeguard covered defense information, with mandatory reporting of cyber incidents. The use of prohibited telecommunications equipment from covered foreign vendors is strictly forbidden under 252.204-7018. Invoicing must be processed exclusively through Wide Area WorkFlow, and contractors must maintain active SAM registration with valid UEI and CAGE codes. Compliance with whistleblower rights, trafficking in persons prohibitions, employment eligibility verification, and sustainable product requirements are mandatory. Contract type remains unspecified pending award, and pricing data is not provided in the solicitation, leaving unit and total contract values undetermined. All items are subject to government inspection and acceptance at the destination, with quality adherence enforced through referenced standards and clauses.
MEDICAL SUPPLY CHAIIN FSH

POSTED

7 days ago

DEADLINE

in about 6 hours
View Details
NAICS: 456199
DIBBS
Supply of Respirator Cleaning Wipes for Wright-Patterson AFB
Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 339112
New
DIBBS
INHALER, SPACING DEV
Solicitation # SPE2DS-26-T-334M
This contract, identified as SPE2DS-26-T-334M, is for the procurement of five valved holding chamber spacing devices with MDI and flow signals. The items are identified by NSN 6515-01-538-2141 and are available from Tri-Anim Health Services (P/N 58-79710EA) or Owens and Minor (P/N 6414879710EA). Delivery is required within 20 days after order, with the destination point set as Fort Stewart. The agreement mandates strict adherence to DLA packaging requirements and Medical Marking Standard No. 1. All units must be provided in sealed containers and shipped in suitable commercial exterior packaging to ensure safe delivery. The contract is governed by technical and quality requirements listed in the DLA Master List, and it specifies a zero percent quantity variance for the order.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CASE, MEDICAL INSTRUMEN
Solicitation # SPE2DS-26-T-334L
This contract is for the procurement of eight medical instrument and supply cases, identified by NSN 6545-01-512-7231. The cases must be constructed from high density copolymer plastic, featuring a black finish, wheels, and carrying handles. They are required to be watertight, dustproof, chemical resistant, and capable of floating in water with a 350 lb capacity. The exterior dimensions are specified as 31.5 by 22.875 by 18.875 inches, and the units are supplied without inserts. The agreement mandates compliance with DLA packaging requirements and Medical Marking Standard No. 1. Bidders must specify the source and part number, with referenced options including Pelican Products P/N 1660 or General Dynamics Mission Systems P/N 10-2796108-1. Delivery is required within five days after the order, with FOB destination and inspection and acceptance occurring at the destination. This item is not regulated by the FDA.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
GASKET, ANESTHESIA M
Solicitation # SPE2DS-26-T-334V
This solicitation, issued by the Department of Defense Medical Supply Chain, is for the procurement of three anesthesia machine gaskets under solicitation number SPE2DS-26-T-334V. The required items, identified by NSN 6515-01-710-3380, serve as repair parts for end item NSN 6515015646213. Bidders are required to specify the source and part number being supplied, with a delivery timeline of 84 days after receipt of order. The contract adheres to DLA packaging and quality requirements, specifically referencing RP001 and RA001, and includes provision RQ011 regarding the removal of government identification from non-accepted supplies. The response deadline for this federal acquisition is August 18, 2026, with the place of performance located in APO 09227.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
AIRWAY, SUPRAGLOTTIC
Solicitation # SPE2DS-26-T-334Z
This contract is for the procurement of five disposable supraglottic airway devices, size 5 with purple tips, under solicitation SPE2DS-26-T-334Z for the Department of Defense. These devices are designed for patient ventilation and feature a separate channel for gastric tubes and a beveled distal tip for directing the airway into the upper esophagus. Each unit is issued individually and includes a 60cc syringe and lubrication. The items must have a total shelf life of 36 months, with no more than 5 months elapsed from the date of manufacture to the date of delivery to the government. All labeling and shelf life markings must comply with the latest Medical Marking Standard No. 1 and MMS1A, including the manufacture date, expiration or retest date, and contract or lot number. Delivery is required within 5 days after receipt of order to Fort Campbell.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
FILTER ELEMENT, VENTILA
Solicitation # SPE2DS-26-T-335D
This contract is for the procurement of seven polyvinyl air intake disk filter elements designed for use as secondary level air filtration in portable ventilators. The specific components are associated with NSN 6515-01-608-3272 and are compatible with the portable ventilator NSN 6515-01-586-5898, also identified as Zoll Part Number 800-EMVP-04. Each filter element features a plastic polyurethane body, weighs 4 grams, and measures 1 inch by 1 inch. The solicitation, issued by the Department of Defense Medical Supply Chain, requires delivery within 20 days after receipt of the order. Suppliers must adhere to DLA packaging requirements and Medical Marking Standard No. 1 for all labeling. Bidders are required to specify the source and part number being supplied, and the contract is subject to technical and quality requirements as outlined in the DLA master list.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334516
New
DIBBS
COLORIMETER, COMPARA
Solicitation # SPE2DS-26-T-335A
This solicitation from the Department of Defense Medical Supply Chain involves the procurement of 40 comparative colorimeters under solicitation number SPE2DS-26-T-335A. The devices must be rugged, waterproof with an IP67 rating, and feature a large backlit display, optional Bluetooth connectivity, and a datalogger capable of storing the last 50 measurements. Technical specifications include an absorbance range of 0-2.5 ABS and the ability to measure free and total chlorine parameters within operating conditions of 0-50 degrees Celsius and 0-90 percent relative humidity. The contract requires delivery within 22 days after receipt of order and mandates compliance with DLA master technical and quality requirements, specifically RA001, RP001 for packaging, and RQ011 for the removal of government identification from non-accepted supplies. Reagents are to be sold separately. The procurement is managed by the Medical Supply Chain MD SURG FSF with a performance location in New Cumberland, Pennsylvania.
Analytical Laboratory Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334511
New
DIBBS
PAD, ELECTRODE, DEFIBRIL
Solicitation # SPE2DS-26-T-334Q
This contract is for the procurement of one package containing five sets of Smart Pads III disposable multifunction defibrillation electrodes, identified by NSN 6515-01-604-9504. These pads are designed for use with adult patients and can be adapted for infant or child patients using an optional key. They are compatible with FR2 HeartStart and manual defibrillators and support a range of functions including ECG monitoring, external pacing, synchronized cardioversion, and defibrillation. The pads feature off-set tabs for easy placement and can be stored in the FR3 carry case or preconnected to enable routine self-testing. The supplier must adhere to commercial packaging and packing standards, ensuring each unit is sealed to prevent damage and shipped in suitable exterior containers for safe delivery to San Antonio. All materials must be marked according to Medical Marking Standard No. 1. The contract incorporates specific DLA technical and quality requirements, including guidelines for the removal of government identification from non-accepted supplies. Delivery is required within five days after the order is placed.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
BAG, COLLECTION, DRAI
Solicitation # SPE2DS-26-T-335B
This solicitation is for the procurement of CSF drainage collection bags under NSN 6515-01-523-8467, designed for use with external drainage systems both with and without EVD catheters. The items are issued in packages of five and must be delivered to Scott AFB within 20 days after the order is placed. The contract mandates strict adherence to commercial packaging standards to prevent damage and requires all materials to be marked according to Medical Marking Standard No. 1. Compliance with DLA packaging requirements and technical quality standards is mandatory, and the procurement is managed by the Department of Defense Medical Supply Chain.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
LEAD SET, ELECTRODE, ELE
Solicitation # SPE2DS-26-T-334P
This solicitation is for the procurement of one ZOLL 4 lead ECG cable lead set, which is a component of the Propaq MD monitor/defibrillator end item. The requirement is issued by the Department of Defense Medical Supply Chain under solicitation number SPE2DS-26-T-334P, with a delivery deadline of 20 days after the order is placed. The place of performance is designated as Nellis AFB. The contract mandates strict adherence to commercial packaging standards, requiring each unit to be sealed in a container that prevents damage during transit. All materials must be marked according to Medical Marking Standard No. 1, superseding MIL-STD-129. Bidders are required to specify the source and part number being supplied, and the procurement incorporates specific technical and quality requirements as outlined in the DLA Master List and DLA packaging requirements.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
STETHOSCOPE
Solicitation # SPE2DS-26-T-335G
This contract is for the procurement of eight Littmann III stethoscopes under solicitation SPE2DS-26-T-335G for the Department of Defense. The required devices must feature machined stainless steel two-sided tunable chest pieces, a 27-inch single lumen binaural tube, and a wide diameter aerospace alloy headset with soft ear tips. The units must be latex and phthalate free, weighing 150 grams, with a large diaphragm of 1.7 inches and a small diaphragm of 1.3 inches. Delivery is required within 20 days after receipt of the order. All items must be provided in commercial sealed unit containers and shipped in suitable exterior packaging to ensure safe delivery. Compliance with Medical Marking Standard No. 1 is mandatory, and bidders are required to specify the source and part number being supplied.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SHIELD, FACE, SURGICAL
Solicitation # SPE2DS-26-T-334K
This contract is for the procurement of disposable, one-piece, 3/4 length surgical face shields designed to provide upper face and eye protection. The shields must be fog resistant and feature an elastic headband with a sponge rubber cushion. The unit of issue is a package containing 50 individual shields, with a total quantity of one package requested under purchase request 7017833820. Delivery is required within 20 days after receipt of the order. The items must adhere to Medical Marking Standard No. 1 and follow specific commercial packaging and packing requirements to ensure safe delivery to Cannon AFB. The procurement is managed by the Department of Defense Medical Supply Chain and is subject to DLA packaging requirements and technical quality standards. This solicitation, identified as SPE2DS-26-T-334K, falls under NAICS code 339112.
Surgical and Medical Instrument Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 322211
New
DIBBS
PAD, ABDOMINAL
Solicitation # SPE2DS-26-T-335P
This solicitation from the Department of Defense Medical Supply Chain for surgical facilities seeks the procurement of sterile abdominal absorbent pads. The specified product measures 8 by 10 inches and features a nonwoven outer layer, a cellulose center for fluid dispersion to prevent pooling, and a hydrophobic back with sealed edges. The items are to be supplied in packages of 360 units under NSN 6510-01-598-1988. The contract requires delivery within 20 days after receipt of order to the performance location at JB Andrews. It adheres to DLA packaging requirements and technical quality standards as outlined in the DLA Master List. This federal acquisition is categorized under NAICS code 322211 and is managed by primary point of contact Seth Tootell.
Corrugated and Solid Fiber Box Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details