Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

DRESSING, OCCLUSIVE, ADH

Active

SPE2DS-26-T-284UFederal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract solicitation is for an occlusive adhesive dressing identified by NSN 6510-01-234-8943, with a single-unit purchase request numbered 7017660495. The solicitation, issued under number SPE2DS-26-T-284U by the Defense Logistics Agency under the Department of Defense, was posted on July 29, 2026, and requires responses no later than August 4, 2026. The procurement is classified as a federal solicitation with no specified set-aside type or NAICS code, indicating it is open to general federal contractors. The place of performance and point of contact details are not provided, but the solicitation can be reviewed through the official DIBBS portal using the provided UI link.

General Info

Occlusive adhesive dressing procurement under DLA solicitation SPE2DS-26-T-284U due August 4, 2026.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation

PostedJul 29

Solicitation

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeUS

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUS

ContactsNo contact information available

Full Description

Show more

DRESSING, OCCLUSIVE, ADH NSN/Part Number: 6510-01-234-8943 Purchase Request: 7017660495QTY: 1

Similar Contracts

Same NAICS industry code

SYRINGE, LABORATORY

Solicitation # SPE2DH-26-T-5613

The contract solicits 300 packages of 10 cc laboratory syringes, with each package containing 100 units, for a total of 30,000 syringes, under the NSN 6640-01-678-1647. Delivery is required within 85 days after award, and the purchase request number is 7017674629. The solicitation is issued under SPE2DH-26-T-5613, with a response deadline of August 5, 2026, and was posted on July 29, 2026. The National Industrial Classification System code is 339113, and the procurement is managed by the Department of Defense through the Medical Supply Chain FSH office, with performance located in New Cumberland, Pennsylvania, zip code 17070-5002. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and the applicable revision depends on whether the acquisition is simplified or large, with the controlling revision determined by the solicitation or amendment date. Packaging must comply with DLA packaging standards, and suppliers must remove all government identification from non-accepted supplies. Primary point of contact for inquiries is Tina Vu, reachable via email and phone provided.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

GLOVE, PATIENT EXAMI

Solicitation # SPE2DS-26-T-284R

The contract is for the procurement of 2 boxes of patient examining gloves, each box containing 100 gloves, designated by NSN 6515-01-673-0527. The gloves are stretch vinyl, latex-free, disposable, ambidextrous, aloe-coated, powder-free, non-sterile, and feature a beaded and snug-fit cuff. They are sized X-Large, colored green, with a length of 9 inches and a thickness of 6.7 mil. The unit of issue is a package of 100 gloves, and the product must have a shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the date of delivery to the government. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The government reserves the right to remove its identification from non-accepted supplies. Delivery is required within five days of award, and the solicitation was issued under contract number SPE2DS-26-T-284R with a response deadline of August 4, 2026. The contracting office is part of the Department of Defense’s Medical Supply Chain under the MD Surg FSF, with performance directed to Williamsburg, Virginia, and primary point of contact being Patrick Esposito.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

SUCTION UNIT, AIRWAY KI

Solicitation # SPE2DS-26-T-284B

The contract solicitation is for a Suction Unit, Airway KI with NSN 6515-01-364-1047, under purchase request 7017673928 for a quantity of two units. It is issued by the Defense Logistics Agency under the Department of Defense through solicitation number SPE2DS-26-T-284B, with the posting date of July 29, 2026, and a response deadline of August 4, 2026. The solicitation is classified as a federal procurement with no specific set-aside designation, and the place of performance and office address details are not specified, though the country code is listed as the United States. Interested parties can access the full solicitation through the DIBBS portal using the provided UI link.

Defense Logistics Agency

POSTED

about 14 hours ago

DEADLINE

CONTAINER, THERMAL, BLOO

Solicitation # SPE2DH-26-T-5619

The thermal blood transport container, identified by NSN 6530-01-654-0062, is designed to safely carry two units of whole blood under controlled temperatures, featuring an insulated inner box enclosed in a Multicam-colored nylon outer pouch with a carrier for secure attachment to personnel harnesses. This unit is sold individually and must meet all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on the acquisition type. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed prior to return. The contract falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain FSH, with performance required in Williamsburg, Virginia. Bidders must clearly indicate the source and part number being offered. The solicitation was posted on July 29, 2026, with responses due by August 5, 2026, and delivery must be completed within five days of award.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 14 hours ago

DEADLINE

CONTROL, GLUCOSE

Solicitation # SPE2DS-26-T-283Y

The contract specifies the procurement of Prodigy Glucose Control Solution, Low Level 1, in 4 mL units, compatible with all Prodigy brand glucose meters and intended solely for in vitro diagnostic use. The product must have a guaranteed shelf life of 24 months, with no more than three months elapsed from the date of manufacture to the date of delivery to the government. Storage must be at room temperature and freezing is strictly prohibited. The solution is regulated by the FDA and must be sourced from approved manufacturers, specifically Prodigy Diabetes Care LLC or Cardinal Health 200, LLC, with their designated part numbers. All packaging and labeling must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and adhere strictly to DLA’s Packaging Requirements for Procurement, with commercial packaging in accordance with ASTM D3951 unless otherwise overridden by DLA's technical requirements. The unit of issue is each, and packaging must protect against damage and ensure safe transport via common carriers at the lowest possible rate. The contract includes two line items totaling two units, each priced at $2.00 and $4.00 respectively, with firm fixed prices and zero tolerance for quantity variance. Delivery is required within five days of order placement, FOB destination, with inspection and acceptance occurring at the point of delivery. Shipments must use the fastest traceable means and are prohibited from using parcel post. Two distinct delivery addresses are specified: one at Fort Bragg, North Carolina, and another in Melrose, Massachusetts, each with assigned tracking codes and logistical identifiers. The material is not classified as hazardous per Fed-STD-313 and must be labeled with the appropriate government identification, with strict compliance required for all packaging, marking, and palletization standards. The solicitation number is SPE2DS-26-T-283Y, with a response deadline of August 4, 2026, and required delivery dates set for July 30 and July 31, 2026, depending on the delivery point.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

INTRODUCER KIT, CATH

Solicitation # SPE2DS-26-T-284W

The contract specifies the procurement of an Introducer Sheath Kit designed for use with an ER-REBOA catheter, containing a 7FR sheath with a .035 inch short guidewire, an 18G needle, a 30cc syringe, 50ml of 0.9 percent saline, a 5FR clamp, a number 11 stainless steel scalpel, and a 2-0 nylon suture with reverse cutting, 30 inches in length. The kit is identified by NSN 6515-01-663-2913 with a quantity of 2 KT, and a purchase request number of 7017663257, requiring delivery within five days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue or award date depending on acquisition size. Packaging must meet DLA standards, and all supplies must be free of government identification if not accepted. Bidders must clearly state the source and part number being offered. The solicitation number is SPE2DS-26-T-284W, posted on July 29, 2026, with responses due by August 4, 2026, under NAICS code 339113 for medical equipment manufacturing, administered by the Department of Defense through the Medical Supply Chain MD Surg FSF, with performance required in Williamsburg, Virginia, 23185-5830.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 14 hours ago

DEADLINE

Lateral Flow Cassette Production & AssemblyThe contract requires the final production and assembly of exactly 2,000 lateral flow device kits according to a CDC-approved design, with full responsibility for quality validation and appropriate packaging to meet federal shipping standards. All work must be completed to ensure each kit is fully functional, properly labeled, and ready for direct shipment to the CDC in Atlanta, with the delivery location specified as ZIP code 30341. The production process must comply with all regulatory and technical specifications set forth by the CDC to guarantee consistency and reliability of the devices. This is a subcontract opportunity under NAICS code 339113, issued by the CDC Office of Acquisition Services within the Department of Health and Human Services. The solicitation was posted on July 29, 2026, and responses are due by 6:00 PM Eastern Time on August 18, 2026. There is no set-aside designation specified, and the contract does not identify a specific point of contact. All proposals must demonstrate capacity, quality control procedures, and logistical readiness to deliver the complete batch to the designated CDC facility in Atlanta by the required timeline.

CDC Office Of Acquisition Services

POSTED

about 19 hours ago

DEADLINE

Self-Contained Breathing Apparatus (SCBA) InspectionThe contract covers the annual inspection, testing, and maintenance of Self-Contained Breathing Apparatus units deployed for firefighting and emergency response aboard naval vessels. This work is critical to ensuring the operational readiness and safety of personnel in high-risk environments, requiring strict adherence to safety standards and performance benchmarks. All SCBA units must undergo comprehensive evaluations to verify functionality, compliance with regulatory requirements, and suitability for marine operations under demanding conditions. The solicitation is classified as a subcontract under NAICS code 339113, indicating a focus on medical equipment and supplies manufacturing, with performance tied to the U.S. Department of Defense through the Naval Supply Systems Command Fleet Logistics Center Yokosuka. The opportunity was posted on July 29, 2026, with a firm response deadline of August 13, 2026, at 2:00 AM. While no set-aside designation or point of contact is specified, the place of performance is associated with naval operations aboard vessels, and all services must be conducted in accordance with established military and maritime safety protocols to maintain mission-critical readiness.

Navsup Flt Logistics Ctr Yokosuka

POSTED

about 19 hours ago

DEADLINE

Specialized Accessories SupplyThe contract titled Specialized Accessories Supply seeks the provision of Miltenyi-compatible accessories including a carrying case, sample rack, and tube holder to support seamless integration with an existing main system. These components are essential for ensuring proper handling, storage, and operational efficiency of laboratory equipment within the target workflow. The solicitation is open for responses until August 3, 2026, and is classified as a subcontract under NAICS code 339113, indicating it pertains to medical equipment and supplies manufacturing. Performance is required at Bethesda, Maryland, with the National Institutes of Health under the Department of Health and Human Services as the contracting entity. All submissions must be prepared to meet exact technical specifications for compatibility and durability to ensure full functionality with the Miltenyi platform.

National Institutes Of Health Olao

POSTED

about 19 hours ago

DEADLINE

36C255-26-AP-2895 FIS-007 Flexible Borescopes-SPS – Kansas City VAMC

Solicitation # 36C255-26-AP-2895

The Department of Veterans Affairs, through Network Contracting Office 15 in Leavenworth, Kansas, is proceeding with a sole-source procurement for Healthmark Industries’ FIS-007 Flexible Borescopes under FAR Part 12, which governs the acquisition of commercial products and services. The acquisition is justified under FAR 6.302-1 due to the proprietary and unique nature of the equipment, which is required for medical endoscopic operations at the Kansas City VA Medical Center in Missouri. The procurement is not open to competition, and no formal solicitation or evaluation factors will be issued; the award will be made directly to Healthmark Industries without competitive bids or scoring. The Contracting Officer is Teresa Cabanting, who can be contacted via email or phone for any inquiries, and responses to the notice must be submitted via email by July 30, 2026. The NAICS code has been updated to 339113 and the Product Service Code to 6515 to accurately reflect the nature of the item being procured, while all other details in the notice remain unchanged. The place of performance is clearly designated as the Kansas City VAMC, with the contracting office located in Leavenworth, Kansas. The contract details do not include pricing information, delivery schedules, inspection criteria, or packaging specifications, as the notice serves only as a pre-solicitation announcement of intent and not a formal request for proposals. No contract type is explicitly defined beyond the commercial item framework, and no contract administration data such as payment offices, accounting codes, or COR/COTR appointments are provided. Similarly, representations and certifications typically contained in Section K, including UEI, CAGE, or socioeconomic status, are absent from the documentation. Packaging, marking, bar-coding, and quality standards are not detailed in the notice and are presumed to be governed by the manufacturer’s commercial specifications under FAR Part 12. While no formal clauses or attachments are enumerated, the notice references an attached document containing additional procurement details, and all procedural compliance is based on the single-source determination authorized by federal acquisition regulations. The acquisition proceeds under the assumption that the FIS-007 Flexible Borescope is the only product capable of meeting the VA’s medical requirements, and no alternatives are considered viable.

255-NETWORK Contract Office 15 (36C255)

POSTED

about 19 hours ago

DEADLINE

in about 9 hours

SAR Vacuum Spine Boards

Solicitation # W3999-270001

The Department of National Defence is seeking to procure twenty-seven lightweight vacuum spine boards under solicitation W3999-270001, with all deliverables required to be received by 5 October 2026 and the contract period running until 5 December 2026. The spine boards must be approximately six feet in length,具备 a chambered vacuum bead system for enhanced immobilization during airlift, vertical rescue, and austere SAR operations, and must be radiolucent, MRI-compatible, latex-free, and resistant to puncture, abrasion, moisture, and bodily fluids. Each unit must include a manual vacuum pump with no external power requirement, a complete restraint strap system, integrated carry handles for multiple lifting configurations, and be compactly foldable or rollable for aircraft storage. The product must be compatible with existing rigid spine boards and the Ferno Cot transport system. All items must be new, conform to the latest specifications, and be delivered Delivered Duty Paid to CFB Winnipeg 17 Wing, 715 Wihuri Road, Winnipeg, Manitoba, under Incoterms 2020, with all customs duties, GST/HST, and excise taxes included in the quoted price. Payment will be made at a fixed price upon delivery, with undisputed invoices settled within 30 days of receipt, subject to a mandatory 15 percent tax withholding by the Canada Revenue Agency. Award will be made to the lowest priced compliant offer, with all submissions evaluated against mandatory technical criteria; failure to meet any of these criteria results in non-responsiveness. Proposals must be submitted electronically in three sections—Technical Offer, Financial Offer, and Offer Submission Forms—with supporting documentation in either English or French, and must remain valid for 60 days beyond the closing date of 25 August 2026. Offers may not exceed five megabytes unless submitted across multiple emails, and must avoid embedded scripts or macros. The Contractor must certify compliance with Canada’s Code of Conduct for Procurement, lack of conflict of interest, and that goods are not produced using forced labor. The Contractor is also required to maintain valid AIEE status, use environmentally preferable packaging where feasible, and ensure all packaging materials are reusable, returnable, or recyclable, excluding packaging tape. The contract is governed by the laws of Manitoba, requires written amendments, prohibits assignment without Canada’s consent, and includes a 12-month warranty. The Contracting Authority is Adam Bidzinski

Department of National Defence

POSTED

DEADLINE

Supply of 1-Liter Test Lung for Ventilator CalibrationThe contract seeks the procurement of a single 1-liter test lung device with National Stock Number 6515-01-608-7696, designed specifically for use as a calibration tool within ventilator calibration kits. This device must be fully compatible with the IMPACT and ZOLL ventilator series 731 and 754M models, ensuring accurate performance verification and system calibration in clinical and maintenance environments. The item is intended for use by military medical personnel and support teams responsible for maintaining ventilator integrity in operational and non-operational settings. Deployment will occur at Travis Air Force Base with a delivery address of 94535-1825, where the test lung will be integrated into existing calibration protocols and inventory systems. The contract is structured as a subcontract under the Department of Defense, managed by the Medical Supply Chain MD Surg FSF, and falls under the NAICS code 339113 for medical equipment manufacturing. The solicitation was posted on July 28, 2026, with a firm response deadline of August 3, 2026, indicating the urgency of securing the device for timely integration into maintenance cycles. All submissions must meet exact technical specifications for compatibility and performance, and the sole item required is the specified test lung device without additional components or services unless implicitly required for delivery and verification. No set-aside provisions have been designated, and the procurement is open to qualified subcontractors capable of fulfilling the DoD’s calibration standards.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-158J

A safety relief valve is being procured under contract SPE7MC-26-T-158J by the Defense Logistics Agency for delivery to the USS BOXER LHD 4 at FPO AP 96661, with a required delivery date of July 27, 2026. The contract specifies two identical items, each priced at $1.00, with no variance allowed in quantity, and delivery must be made FOB destination within 20 days. The valve has a carbon steel body with flanged end connections and must comply with strict environmental and safety standards, including a complete prohibition on ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except where explicitly permitted for functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization adhering to DLA’s packaging requirements, and all materials must be properly identified using the assigned NSN 4820013387425. The contract references the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications, and the procurement is a total small business set-aside under NAICS code 332911, with submissions directed to DLA and managed via the DIBBS system.

Industrial Valve Manufacturing

POSTED

about 14 hours ago

DEADLINE

TRICON, FREIGHT, SPEC

Solicitation # SPE8ED-26-Q-0603

The contract pertains to the procurement of TRICON, FREIGHT, SPEC with the NSN 8150-01-533-8673, under Purchase Request 7017400576 for a quantity of 40 units. It is issued as a solicitation by the Defense Logistics Agency under the Department of Defense, with solicitation number SPE8ED-26-Q-0603. The solicitation was posted on July 29, 2026, and responses are due by August 5, 2026, providing potential vendors a one-week window to submit proposals. The contract does not specify a set-aside type or NAICS code, and no geographic point of performance or contact information is provided in the data. All activity is managed through the DIBBS platform, with the official solicitation page accessible via the provided link.

POSTED

about 14 hours ago

DEADLINE

LIGHT SPECIAL PURPO

Solicitation # SPE8E7-26-Q-0270

The contract specifies the procurement of item 6220-01-549-4174, identified as LIGHT SPECIAL PURPO, with a total quantity of 110 units distributed across eight line items ranging from 2 to 29 units each. All deliveries must comply with a strict zero percent variance in quantity and are subject to inspection and acceptance at the destination point. Delivery is required within 30 days after order date, with free on board terms originating from the supplier’s location. Packaging must adhere to MIL-STD-2073-1E standards with specific preservation methods, unit containers, and packing levels, while marking must fully comply with MIL-STD-129 without any special labeling. Palletization must conform to DLA Packaging Requirements for Procurement (RP001), and hazardous material handling is governed by IP025, which mandates packaging per FED-STD-313 and TQ requirement IP025 if deemed hazardous; otherwise, commercial packaging under ASTM D3951 is acceptable, with all DLA Master List requirements taking precedence. The supplies are destined for multiple U.S. military and foreign military locations, including Royal Jordanian Air Force and U.S. Army bases in Hawaii and Jordan, with freight and marking instructions tied to specific TCN and RDD identifiers. The contract is issued under solicitation SPE8E7-26-Q-0270 by the Defense Logistics Agency, referencing the DLA Master List of Technical and Quality Requirements for all technical and quality specifications.

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE8ES-26-Q-0090

This procurement under solicitation SPE8ES-26-Q-0090 is for enamel designated by NSN 8010-00-286-7749 in quantities of four and two containers, each containing five gallons, for delivery to Diego Garcia and other government locations. The contract requires strict compliance with Department of Defense packaging, marking, and shipping standards including MIL-STD-2073-1E and MIL-STD-129, with special handling for Type II shelf-life items that must retain at least 85% of their 24-month shelf life upon receipt. The product must originate from manufacturers approved on both the Qualified Products List and the Approved Products List maintained by the Performance Review Institute and Master Painters Institute respectively, and must conform to MPI #9 Revision D dated 05/01/2014. Hazardous material shipping requirements are governed by OSHA’s revised Hazard Communication Standard, mandating submission of Safety Data Sheets and compliant labels prior to award, along with employee training on the Globally Harmonized System. This acquisition is conducted under simplified procedures authorized by 41 U.S.C. 1901 and Class Deviation 2026-O0028, with firm fixed pricing and zero tolerance for quantity variance. Delivery is required within 60 days after issuance of the order, with inspection and acceptance occurring at origin. The item is subject to Controlled Unclassified Information (CUI) requirements, and if Covered Defense Information or export-controlled technical data is involved, the contractor must comply with DFARS clauses 252.204-7012, 252.204-7019, and 252.204-7020. Noncompliance with CUI, shelf-life, packaging, or approval list requirements may lead to cancellation of purchase orders. All markings must reflect special code 33 for Type II shelf life and adhere to MIL-STD-129, with freight addressed to FPO AP 96595-0004 and specific shipping instructions governed by DLAD procedural notes.

Paint and Coating Manufacturing

POSTED

about 14 hours ago

DEADLINE

MARKER, IDENTIFICATI

Solicitation # SPE8E6-26-T-3922

This contract issued by the Defense Logistics Agency under solicitation number SPE8E6-26-T-3922 specifies the procurement of two units of a marker and identifier with NSN 7690998418549 and part number 187-5558, priced at $0.00 per unit for a total of $0.00, with delivery required within five days of award. The item must be delivered FOB origin and inspected and accepted at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all labeling and palletization adhering to DLA’s Packaging Requirements for Procurement, which supersede any conflicting standards. The DLA Master List of Technical and Quality Requirements governs all technical specifications, and all supplies must be marked and labeled according to government standards, with government identification removed from non-accepted items. The shipment must be sent via traceable means, excluding parcel post, to the designated delivery point in Sioux City, Iowa, with the same address used for marking and freight. The contract references specific DLA directives including RP001 and RD003, and includes a provision for covered defense information. The required delivery date is July 24, 2026, with a solicitation response deadline of August 10, 2026, and the contract is classified under NAICS code 323111 for federal procurement.

Commercial Printing (except Screen and Books)

POSTED

about 14 hours ago

DEADLINE

FILTER-DRIER, REFRIGERA

Solicitation # SPE8E8-26-T-4910

The contract specifies the procurement of a Filter-Drier for Refrigerant, identified by NSN 4130-01-367-5748 and part number BFK-083S from Emerson Electric Co ALCO Controls, with a quantity of four units to be delivered within 20 days of contract award. Delivery is FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any other standards. Packaging and palletization must adhere to DLA’s RP001 requirements, and parcel post is strictly prohibited—shipment must be via traceable means. The delivery address is NAVFACSYSCOM MID-ATLANTIC in Norfolk, VA, with specific building and contact details provided for freight shipments. The required delivery date is July 27, 2026, and the contract is governed under solicitation SPE8E8-26-T-4910, which incorporates mandatory technical and quality specifications referenced through R and I numbers from the DLA Master List. The contract is issued under the DoD unit of issue system and is subject to Covered Defense Information protocols. The point of contact is Alexis Selby of the Defense Logistics Agency, and the solicitation is classified under NAICS code 333415 for industrial machinery manufacturing.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

LADDER, SAFETY STEP

Solicitation # SPE8E5-26-T-3728

The contract pertains to the procurement of one unit of a Safety Step Ladder, identified by NSN 5440016969999 and part number 10403 from LITTLE GIANT LADDER SYSTEMS, LLC, under solicitation SPE8E5-26-T-3728. Delivery is required within 20 days of contract award, with FOB Origin terms and zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and the item must be packaged in strict accordance with ASTM D3951, with all labeling and marking compliant with MIL-STD-129 and DLA’s packaging requirements RP001. Palletization must adhere to DLA’s specified standards, and government-issued identification must be removed from non-accepted supplies per RQ011. Technical and quality requirements referenced through R- and I-numbers from the DLA Master List override any conflicting standards. Shipping must be conducted via traceable freight, explicitly prohibiting parcel post, to the designated delivery point at Naval Air Station Whidbey Island in Oak Harbor, WA. The contract incorporates stringent controls for documentation, source approval, and handling of covered defense information under RD003. The unit of issue is each, with a total price of $1.00, and the item is classified under NAICS code 238110. The original required delivery date is July 23, 2026, with procurement managed by the Defense Logistics Agency. A designated point of contact, Brandon Wicker, can be reached for inquiries, and all submissions must align with the solicitation’s deadlines and formatting requirements. The contract also specifies internal government identifiers and distribution codes for tracking, and final delivery must be coordinated using the provided TCN and project details to ensure compliance with DLA’s logistics protocols.

Poured Concrete Foundation and Structure Contractors

POSTED

about 14 hours ago

DEADLINE

FLASHLIGHT, LAZERBRI

Solicitation # SPE8E7-26-Q-0274

The contract pertains to the procurement of one box containing twelve LazerBrite model LB2-105-12B flashlights, identified by NSN 6230-01-505-5272, under solicitation SPE8E7-26-Q-0274. The supplier, Tactical Lighting Solutions LLC, is required to deliver the items in strict compliance with DLA packaging standards outlined in RP001, including adherence to MIL-STD-129 for marking and labeling, and commercial packaging per ASTM D3951 unless federal hazardous material standards under FED-STD-313 apply, in which case TQ requirement IP025 governs. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting commercial standards. The contract enforces a firm fixed price with zero tolerance for quantity variance, and delivery must occur within 30 days after award, with both inspection and acceptance points at the destination. Shipment is to be routed to the USS RAFAEL PERALTA DDG 115 via FPO AP 96694-1500, and transportation procedures must follow DLAD PROC NOTES C19 and C20. The item is covered under DLA’s procurement framework, with controlled access to covered defense information, and pricing, delivery, and compliance terms are binding with no flexibility.

Broom, Brush, and Mop Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3730

The contract specifies the procurement of aluminum step ladders with the NSN 5440-00-512-0311 and part number 206106ACS200, requiring a quantity of four units to be delivered within 20 days FOB origin. The ladders must comply with all applicable DLA Master List of Technical and Quality Requirements, which override any general standards such as ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following DLA packaging guidelines. Delivery is directed to a U.S. Air Force prepositioning site in Al Udeid Air Base, Qatar, with shipping instructions referencing specific DLA procedural notes and using the APO AE 09898 address for parcel posting. The unit price is set at $4.00 per unit, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The contract is issued under solicitation SPE8E5-26-T-3730, with a response deadline of August 10, 2026, and a required delivery date of July 27, 2026, to be fulfilled by approved suppliers including Louisville Ladder Inc, Bauer Corp, and Green Bull Inc. All items must be shipped using TAC 2, labeled as non-mailable, and tracked under RDD 777 with the assigned project code 9GS TP 2.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLATE, INSTRUCTION

Solicitation # SPE8E6-26-T-3917

This contract pertains to the procurement of an instruction plate with NSN 9905-01-138-4840, for a quantity of 10 units, under solicitation SPE8E6-26-T-3917, issued by the Defense Logistics Agency on behalf of the Department of Defense. The delivery is required within 20 days of award, and responses must be submitted by August 10, 2026. The contract incorporates technical and quality requirements referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and government identification must be removed from any non-accepted supplies. The associated drawings are accessible only during the open solicitation period via the DIBBS portal. The item falls under NAICS code 339950 and is subject to MIL-STD-130N for identification marking of U.S. military property, as well as supplemental packaging directives. All procurement activities are managed through the DIBBS system, with primary point of contact being Kathleen Selover.

Sign Manufacturing

POSTED

about 14 hours ago

DEADLINE

CLOTH, CLEANING

Solicitation # SPE8E5-26-T-3726

The contract is for the procurement of 1 box of cleaning cloths with NSN 7920-01-614-3522 and part number 599306, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3726. The unit of issue is a box containing 100 cloths, with delivery required within 20 days to the Marine Corps Air Facility in Quantico, Virginia, under FOB origin terms and no tolerance for quantity variance. The item is classified as a Type 2 shelf life item with a 12-month extendable lifespan, and packaging must comply with MIL-STD-2073-1E and DLA packaging requirements including marking per MIL-STD-129 with special shelf life code 33. Packaging and shipping must adhere to traceable methods only, prohibiting parcel post, and must follow hazardous materials handling procedures. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and the revision in effect at the RFP issue date applies. The item is subject to Covered Defense Information controls and government identification removal for non-accepted supplies. The delivery point is destination, with inspection and acceptance also occurring at destination. The required delivery date is July 30, 2026, and the contract includes specific shipping instructions, a designated point of contact, and federal accounting details for HMX-1 supply operations.

Broom, Brush, and Mop Manufacturing

POSTED

about 14 hours ago

DEADLINE