DRUM, HAZARDOUS MATERIA

DRUM,HAZARDOUS MATERIAL DISPOSAL
DRUM, STEEL, SHIPPING AND STORAGE.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RATED (MARKED) CAP. 322 LITERS (85 GAL.).
MINIMUM OVERALL CONTENT 335 LITERS (88.4 GAL.).
MINIMUM HEIGHT WITHOUT COVER 965MM (38 IN.).
MINIMUM INSIDE DIA. IS 660MM (26 IN.).
MINIMUM MATERIAL OF DRUM IS 1.35MM (0.0533 IN.).
FULL REMOVEABLE HEAD WITH NUT AND BOLT TYPE
LOCKING RING. MINIMUM MATERIAL THICKNESS FOR
LOCKING RING IS 2.40MM (0.0946 IN.). MINIMUM
MATERIAL THICKNESS OF BOLT IS 15.875MM
(0.625 IN.). MINIMUM LENGTH OF BOLT IS 88.9MM
(3.500 IN.). BOLT AND NUT SHALL BE INSTALLED TO
THE LOCKING SO THEY WILL NOT BE LOST DURING
SHIPMENT. DRUM TO BE FURNISHED FULLY ASSEMBLED.
PROTECTIVE COATING: COAT ALL EXTERIOR SURFACES
OF THE DRUM (INCLUDING COMPONENT PARTS), EXCEPT
THE CLOSING BOLT AND GASKET (WHEN SUPPLIED),
WITH A RUST INHIBITING COATING THAT WITHSTANDS
THE SALT SPRAY TEST REQUIREMENTS OF ASTM-B-117
UTILIZING A FIVE PERCENT SALT SOLUTION AT 35
DEGREES C (120 DEGREES F) FOR A MINIMUM EXPOSURE
TIME OF 96 HOURS.
RESULTS OF THE SALT SPRAY TEST SHALL SHOW NO
RUST CREEPAGE, BLISTERING, UNDERCUTTING OR LOSS
OF ADHESION OF THE PAINT BEYOND 1/8 INCH OF THE
SCRIBE MARK. ALL OTHER SURFACES OF THE TEST
SPECIMEN SHALL SHOW NO MORE THAN A TRACE OF
FILM FAILURE, (RUST GRADE 9 OF ASTM-D-610), WITH
NONE LARGER THAN 1MM, (3/64 INCH) IN DIAMETER.
ACCEPTABLE COLORS, I.A.W. FED STD 595, ARE AS
FOLLOW: NOS. 37038, 37030, 34082, 34083,
34086, 34089, 34092, 34102, 34127.
DRUM SHALL BE TESTED I.A.W. UN/POP 1A2/Y400/S &
BE TESTED AND MARKED AIR ELIGIBLE TO A MINIMUM
OF 100 KPA.
MARKINGS: DRUM SHALL BE MARKED I.A.W. UN RQMTS.
I.A.W. 49 CFR 178 SUBPART L AND SUBPART M
TO VERIFY THE REQUIREMENTS OF UN TESTING AND
MARKINGS I.A.W. 49 CRF SECTION 178 AS APPLIES.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE8ED-27-T-0197
SECTION B
EVOLVE ELECTRIC LLC 20400 P/N 260039MS4055
MYERS CONTAINER, LLC 53JG6 P/N DLA8502
SKOLNIK INDUSTRIES LLC 63129 P/N HM8501-ATSS
GREIF BROS CORP 88118 P/N Q85BR16NBH
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018912514 0001 EA 63.000
NSN/MATERIAL:8110011014055
DELIVERY (IN DAYS):0160
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
SPE8ED-27-T-0197
SECTION B
PR: 7018912514 PRLI: 0001 CONT’D
US
Need Ship Date:04/26/2027 Original Required Delivery Date:05/04/2027
SPE8ED-27-T-0197 NSN/Part Number: 8110-01-101-4055 Quantity: 63 EA Purchase Request: 7018912514QTY: 63 Delivery: 160 days ADO