DRUM, HAZARDOUS MATERIA

DRUM,HAZARDOUS MATERIAL RECOVERY
DRUM,STEEL,SHIPPING AND STORAGE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RATED (MARKED) CAP. 322 LITERS (85 GAL.).
MINIMUM OVERALL CONTENT 335 LITERS (88.4 GAL.).
MINIMUM HEIGHT WITHOUT COVER 965MM (38 IN.).
MINIMUM INSIDE DIA. IS 660MM (26 IN.).
MINIMUM MATERIAL THICKNESS OF DRUM IS 1.0 MM
FULL REMOVABLE HEAD WITH ONE 50.8MM (2 IN.).
AND ONE 19.05MM (.750 IN.) BUNGS
IN TOP HEAD OF DRUM WITH NUT AND BOLT TYPE
LOCKING RING. MINIMUM MATERIAL THICKNESS OF
LOCKING RING IS 2.40MM (0.0946 IN.). MINIMUM
MATERIAL THICKNESS OF BOLT IS 15.875MM
(0.625 IN.). MINIMUM LENGTH IS 88.9MM
(3.500IN.). BOLT AND NUT SHALL BE INSTALLED TO
THE LOCKING RING SO THEY WILL NOT BE LOST DURING
SHIPMENT, DRUM SHALL BE FURNISHED FULLY
ASSEMBLED.
PROTECTIVE COATING: COAT ALL EXTERIOR SURFACES
OF THE DRUM (INCLUDING COMPONENT PARTS), EXCEPT
THE CLOSING BOLT AND GASKET (WHEN SUPPLIED),
WITH A RUST INHIBITING COATING THAT WITHSTANDS
THE SALT SPRAY TEST REQUIREMENTS OF ASTM-B-117
UTILIZING A FIVE PERCENT SALT SOLUTION AT 35
DEGREES C (120 DEGREES F) FOR A MINIMUM EXPOSURE
TIME OF 96 HOURS.
RESULTS OF THE SALT SPRAY TEST SHALL SHOW NO
RUST CREEPAGE, BLISTERING, UNDERCUTTING OR LOSS
OF ADHESION OF THE PAINT BEYOND 1/8 INCH OF THE
SCRIBE MARK. ALL OTHER SURFACES OF THE TEST
SPECIMEN SHALL SHOW NO MORE THAN A TRACE OF
FILM FAILURE, (RUST GRADE 9 OF ASTM-D-610), WITH
NONE LARGER THAN 1MM, (3/64 INCH) IN DIAMETER.
ACCEPTABLE COLORS, I.A.W. FED STD 595, ARE AS
FOLLOW: NOS. 37038, 37030, 34082, 34083,
34086, 34089, 34092, 34102, 34127.
INSIDE SURFACE OF THE DRUM SHALL BE COATED WITH
A CORROSION INHIBITING ENAMEL.
DRUM SHALL BE TESTED I.A.W. UN/POP 1A2/X440/S
MARKINGS: DRUM SHALL BE
MARKED I.A.W. UN RQMTS. I.A.W. 49 CFR 178
SUBPART L AND SUBPART M TO VERIFY THE REQUIREMENTS
OF UN TESTING AND MARKINGS I.A.W. 49 CFR
SECTION 178 AS APPLIES.
CONTRACTOR SHALL PROVIDE PACKAGINGS,
SPE8ED-27-T-0159
SECTION B
PALLETIZING ENSURING EACH DRUM IS
PROVIDED PHYSICAL/MECHANICAL PROTECTION
AGAINST DAMAGES DURING SHIPMENT AND
STORAGE.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
N2IT CONTAINERS, LLC 5BN27 P/N 05-9511SKL
EVOLVE ELECTRIC LLC 20400 P/N 260039MS4056
MYERS CONTAINER, LLC 53JG6 P/N 8502
SKOLNIK INDUSTRIES LLC 63129 P/N HM8518LT234-ATS
SKOLNIK INDUSTRIES LLC 63129 P/N HM8518T234
GREIF BROS CORP 88118 P/N Q85BR16
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018912513 0001 EA 18.000
NSN/MATERIAL:8110011014056
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
SPE8ED-27-T-0159
SECTION B
PR: 7018912513 PRLI: 0001 CONT’D
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:04/26/2027 Original Required Delivery Date:03/22/2027
SPE8ED-27-T-0159 NSN/Part Number: 8110-01-101-4056 Quantity: 18 EA Purchase Request: 7018912513QTY: 18 Delivery: 167 days ADO