DRUM, SHIPPING AND S

DRUM,SHIPPING AND S
DRUM, STEEL, SHIPPING AND STORAGE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
P/N-UN 1A2/Y30/S
RATED (MARKED) CAP. 2.44 LITERS (149 CU.IN.).
MINIMUM OVERALL CONTENT 2.54 LITERS (150 CU.IN.)
MINIMUM HEIGHT WITHOUT COVER IS 114.3MM
(4.50 IN.). MINIMUM INSIDE DIA. IS 165MM
(6.50 IN.). MINIMUM MATERIAL THICKNESS OF DRUM
IS 0.531MM (0.0209 IN.). FULL REMOVABLE HEAD
WITH NUT AND BOLT TYPE LOCKING RING. MINIMUM
MATERIAL THICKNESS FOR LOCKING RING IS 0.823MM
(0.0324 IN.). MINIMUM MATERIAL THICKNESS OF BOLT
IS 6.25MM (0.250 IN.). MINIMUM LENGTH IS 38MM
(1.50 IN.). BOLT AND NUT SHALL BE INSTALLED TO
THE LOCKING RING SO THEY WILL NOT LOST DURING
SHIPMENT. DRUM SHALL BE FURNISHED FULLY ASSEMBLED. DRUM IS NOT AIR
ELIGIBLE FOR HAZARDOUS PRODUCTS.
DRUM SHALL BE TESTED I.A.W. UN/POP 1A2/Y30/S.
MARKINGS: DRUM SHALL BE MARKED I.A.W. UN RQMTS.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
SPE8ED-26-T-1301
SECTION B
TDP Rev A Gen 1 IAW BASIC DRAWING NR 14153 RE-002545705 REVISION NR DTD 03/07/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MS24347F NOT 4 REVISION NR F DTD 02/17/2022 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017924745 0001 EA 2.000
NSN/MATERIAL:8110002545705
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
SPE8ED-26-T-1301
SECTION B
PR: 7017924745 PRLI: 0001 CONT’D
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
MARKFOR
W81YT4
W6YB USALRCTR FT BRAGG
CL IX SITE AWCF SSF
BLDG Y5015 MMD BLVD
FORT BRAGG NC 28310
US
M/F: (TCN) W81YT462230420
RDD: 238
PROJ: TP 3
SUPP ADD: W9046W SIG: C
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A0A DIST: V ADV: FC: Z9
Need Ship Date:00/00/0000 Original Required Delivery Date:08/14/2026
SPE8ED-26-T-1301 NSN/Part Number: 8110-00-254-5705 Quantity: 2 EA Purchase Request: 7017924745QTY: 2 Delivery: 20 days ADO