Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

DRUM, SHIPPING AND STOR

Open
SPE8ED-27-Q-0120Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This firm fixed price solicitation, SPE8ED-27-Q-0120, is a small business set-aside for the procurement of 126 steel shipping and storage drums (NSN 8110-00-146-1588). The drums must be furnished fully assembled with a rated capacity of 75.7 liters and a minimum overall content of 78.7 liters. Technical specifications require a minimum material thickness of 1.09mm, a full removable head with a nut and bolt type locking ring, and a minimum height of 460mm. Each unit must be tested and marked air eligible to a minimum of 100 kPa in accordance with UN requirements and 49 CFR 178 Subpart L and M. Delivery is required within 90 days after receipt of order to the DLA Distribution DDSP New Cumberland Facility. Inspection and acceptance will occur at the destination, with sampling conducted per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001. The contract incorporates several critical DFARS and FAR clauses, including requirements for safeguarding covered defense information, antiterrorism awareness training, and prohibitions on using covered telecommunications equipment. All payment requests and receiving reports must be processed electronically via the Wide Area WorkFlow system.

General Info

Small business procurement of 126 steel shipping drums for DLA delivery.

NAICS

332439 - Other Metal Container Manufacturing

Place of Performance

PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this firstrfq
High

Read the document

Due in 8 days

Every page of every file, in your free workspace.

Read the document

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

View Full Breakdown
Due in 8 days

Everything you need to bid on this one

Open the full contract in your free workspace.

  • 1 solicitation documentRead every page
  • AI contract breakdown13 sections, Uniform Contract Format
  • Buyer contactEmail and phone
Open the full contract

Ask CLEATUS

I've read this contract. Ask me anything.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS
Contacts1 person available
OfficeUSA

Full Description

Show more
DRUM, STEEL, SHIPPING AND STORAGE.
P/NUN 1A2/X120/S
MS27683-3 RATED (MARKED) CAP. IS 75.7 LITERS (20 GAL.). MINIMUM OVERALL CONTENT 78.7 LITERS (20.8 GAL.). MINIMUM HEIGHT WITHOUT COVER 460MM (18.11 IN.). MINIMUM INSIDE DIA. IS 463.6MM (18.25 IN.). MINIMUM MATERIAL THICKNESS OF DRUM IS 1.09MM (0.0428 IN.). FULL REMOVABLE HEAD WITH NUT AND BOLT TYPE LOCKING RING. MINIMUM MATERIAL THICKNESS FOR LOCKING RING IS 2.40MM (0.0946 IN.). MINIMUM MATERIAL OF BOLT IS 9.53MM (0.375 IN.). MINIMUM LENGTH IS 82.55MM (3.250 IN.). BOLT AND NUT SHALL BE INSTALLED TO THE LOCKING RING SO THEY WILL NOT BE LOST DURING SHIPMENT. DRUM SHALL BE FURNISHED FULLY ASSEMBLED. DRUM SHALL BE TESTED I.A.W. UN/POP 1A2/X120/S <(>&<)> BE TESTED AND MARKED AIR ELIGIBLE TO A MINIMUM OF 100 KPA. MARKINGS: DRUM SHALL BE MARKED I.A.W. UN RQMTS. I.A.W. 49 CFR 178 SUBPART L AND SUBPART M DATED OCT 1993, TO VERIFY THE REQUIREMENTS OF UN TESTING AND MARKING IAW 49 CFR SECTION 178 AS APPLIES.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 14153 RE-001461588 REVISION NR DTD 11/08/2013 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE SPEC NR MS27683C NOT 3 REVISION NR C DTD 02/17/2022 PART PIECE NUMBER:
SPE8ED-27-Q-0120
SECTION B
SUPPLY/SERVICE: 8110-00-146-1588 CONT'D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 8110-00-146-1588 126.000 EA $ _______________ $ ______________ DRUM,SHIPPING AND STORAGE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 90 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
SPE8ED-27-Q-0120
SECTION B
SUPPLY/SERVICE: 8110-00-146-1588 CONT'D
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016566164 0001 N/A N/A N/A 09/01/2026

SPE8ED-27-Q-0120 NSN/Part Number: 8110-00-146-1588 Quantity: 126 EA Purchase Request: 7016566164QTY: 126 Delivery: 90 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332439
New
DIBBS
COLLAPSIBLE JMIC 3.0K
Solicitation # SPE8ED-27-T-0216
Solicitation SPE8ED-27-T-0216 is a federal procurement for the fabrication and delivery of nine Collapsible Joint Modular Intermodal Container (JMIC) Assemblies, identified by NSN 8145-01-588-1830. The containers must be manufactured in accordance with Naval Sea Systems Command drawings 7517221 and DL7517221, and comply with technical requirements in PHST-176A. This is a total small business set-aside under NAICS code 332439, with delivery required within 235 days after order. The contract is managed by the Defense Logistics Agency (DLA) Troop Support, with inspection and acceptance occurring at the point of origin. The procurement includes rigorous quality and testing mandates, specifically requiring First Article Testing (FAT) for two assemblies to verify dimensional conformance, material properties, and finish. Mandatory Product Verification Testing (PVT) is invoked, requiring a 60-day window for completion. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a zero-non-conformance requirement for acceptance. Additionally, the contract mandates strict adherence to cybersecurity standards, including CMMC Level 2 self-assessment and third-party certification, and requires compliance with ITAR and EAR export controls for technical data. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, and the items must be free of asbestos and intentionally added mercury.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 23 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS