DRUM, SHIPPING AND STOR

DRUM, STEEL, SHIPPING AND STORAGE.
P/N UN 1A2/Y400/S
RATED (MARKED) CAP. 220 LITERS (58 GAL.). MINIMUM OVERALL CONTENT 228.8 LITERS (60.3 GAL.) MINIMUM HEIGHT WITHOUT COVER 483.4MM (19.03 IN.) MINIMUM INSIDE DIA. 762MM (30 IN.). MINIMUM MATERIAL THICKNESS OF DRUM IS 1.09MM (0.0428 IN.). FULL REMOVABLE HEAD WITH NUT AND BOLT TYPE LOCKING RING. MINIMUM MATERIAL THICKNESS OF LOCKING RING 2.40MM (0.0946 IN.). MINIMUM MATERIAL THICKNESS OF BOLT IS 15.875MM (0.625 IN.). MINIMUM LENGTH IS 82.55MM (3.250 IN.). BOLT AND NUT SHALL BE INSTALLED TO THE LOCKING RING SO THEY WILL NOT BE LOST DURING SHIPMENT. DRUM SHALL BE FURNISHED FULLY ASSEMBLED. DRUM SHALL BE TESTED I.A.W. UN/POP 1A2/Y400/S <(>&<)> BE TESTED AND MARKED AIR ELIGIBLE TO A MINIMUM OF 100 KPA. MARKINGS: DRUM SHALL BE MARKED I.A.W. UN RQMTS. I.A.W. 49 CFR 178 SUBPART L AND SUBPART M DATED OCT 1996.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 14153 RE-008807074 REVISION NR DTD 03/20/2020 PART PIECE NUMBER:
SPE8ED-27-Q-0068
SECTION B
SUPPLY/SERVICE: 8110-00-880-7074 CONT'D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 8110-00-880-7074 25.000 EA $ _______________ $ ______________ DRUM,SHIPPING AND STORAGE
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 120 DAYS ADO
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION DDSP NEW CUMBERLAND FACILITY 2083 NORMANDY DRIVE DOOR 113 TO 134 NEW CUMBERLAND PA 17070-5002 US
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7015212777 0001 N/A N/A N/A 08/22/2026

SPE8ED-27-Q-0068
SECTION B
SUPPLY/SERVICE: 8110-00-880-7074 CONT'D
SPE8ED-27-Q-0068 NSN/Part Number: 8110-00-880-7074 Quantity: 25 EA Purchase Request: 7015212777QTY: 25 Delivery: 120 days ADO