Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DUCT ASSEMBLY, BLEED

Active
SPE4A6-26-T-24EJFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is for the procurement of one Bleed Duct Assembly, identified by NSN 1560-01-622-6816. This is a source-controlled critical application item that must be manufactured and tested according to specific limited rights data. Only vendors with existing access to this data or those who can provide traceability to approved sources, such as RTX Corporation or Lockheed Martin Corp, are eligible to quote. A Source Approval Request package is required for any company seeking new source approval. The agreement mandates strict adherence to several quality and security standards, including CMMC Level 2 self-assessment and the protection of covered defense information. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with final delivery destined for DLA Distribution San Joaquin in Tracy, California. The required delivery date is September 18, 2026, with a delivery window of 279 days.

General Info

Procurement of one Bleed Duct Assembly due September 18, 2026, for DLA San Joaquin.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

PR: 7012984013 PRLI: 0001 CONT’D, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-24EJ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
KATHERINE DUNIGAN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DUCT ASSEMBLY,BLEED
DUCT ASSEMBLY, BLEED
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RT001: MEASURING AND TEST EQUIPMENT
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
SPE4A6-26-T-24EJ
SECTION B
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
RTX CORPORATION 55820 P/N 4951991-6
LOCKHEED MARTIN CORP 98897 P/N 4P99010-108A
TDP Rev A Gen 1 IAW BASIC DRAWING NR 1X4F3 AMSCBDOC REVISION NR DTD 03/07/2007 PART PIECE NUMBER: 4951991-6
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7012984013 0001 EA 1.000
NSN/MATERIAL:1560016226816
DELIVERY (IN DAYS):0279
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
SPE4A6-26-T-24EJ
SECTION B
PR: 7012984013 PRLI: 0001 CONT’D
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/12/2026 Original Required Delivery Date:09/18/2026
SPE4A6-26-T-24EJ NSN/Part Number: 1560-01-622-6816 Quantity: 1 EA Purchase Request: 7012984013QTY: 1 Delivery: 279 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
FITTING, WINDOW
Solicitation # SPE4A6-26-T-24EQ
This solicitation is for the procurement of 38 window fittings under solicitation number SPE4A6-26-T-24EQ for the Department of Defense ASC Commodities Division. The delivery requirement is 248 days after receipt of order, with the place of performance located at Tinker AFB. Offerors are encouraged to provide quantity ranges in their quotes to accommodate potential changes in demand and should use the DIBBS system to submit no-bid responses if they anticipate a delayed quote. Compliance requirements include strict adherence to domestic material restrictions such as the Berry Amendment and the Buy American Act, as well as a prohibition on providing covered telecommunications equipment. Small business joint ventures must provide specific representations regarding their business status. Additionally, contractors must prepare for a transition to the Account Management and Provisioning System for VSM access and are prohibited from using additive manufacturing processes unless specifically authorized.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ACTUATOR, ELECTROMEC
Solicitation # SPE7MC-26-T-237Z
This contract is for the procurement of one electromechanical actuator, part number 6612/2-S688-100, manufactured by Curtiss-Wright Flow Control Corporation. The item is identified by NSN 4810-01-585-2146 and is to be delivered to DLA Distribution Jacksonville. The delivery timeline is set for 160 days after order, with a required delivery date of September 7, 2027. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. Specific requirements include the use of preservation materials to prevent corrosion on bare metals and proper lubrication of moving parts. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment and other technical quality requirements specified in the DLA master list. Shipping is designated as FOB Origin with inspection and acceptance occurring at the destination.
JACKSONVILLE BLDG

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
VALVE, CHECK, AIRCRAF
Solicitation # SPE7M4-26-T-321M
This contract is for the procurement of five aircraft check valves, identified by NSN 4820015736314 and Eaton Aerospace part number 731660. The order is managed under solicitation SPE7M4-26-T-321M for the Department of Defense Fluid Handling Division. Delivery is required within 168 days, with a required delivery date of January 5, 2027, and a final ship date of February 2, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. As a critical application item, the contract specifies that any non-accepted supplies must have government identification removed per requirement RQ011. All technical and quality requirements are governed by the DLA Master List.
FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
HOT BONDER-CONTROLL
Solicitation # SPE4A0-26-T-4512
This contract, identified as SPE4A0-26-T-4512, is for the procurement of a Hot Bonder-Control aircraft single zone composite repair set, part number HCS9000B, manufactured by Heatcon Composite Systems. The order consists of two separate line items, each for a quantity of one unit under NSN 4920014624658. Delivery is required within five days after receipt of order, with required delivery dates set for August 20 and August 21, 2026. Shipments are destined for Fairchild AFB in Washington and Fort Hood TX, with delivery terms set as FOB Origin and inspection and acceptance occurring at the destination. The contractor is responsible for notifying the government of any configuration or design changes to the commercial off-the-shelf items. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements to follow DLA packaging standards and avoid the use of plastics for wrapping or cushioning where possible. Quality assurance and sampling will be conducted according to MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this request.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
CABLE, SPECIAL
Solicitation # SPE4A7-26-T-676F
This contract is for the procurement of four special cables, identified by NSN 1560-01-267-9997 and part number 007041. The agreement specifies a delivery timeframe of 176 days after order, with a required delivery date of March 25, 2027. Shipping is set as FOB Origin, with the destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to quality and technical standards, including ISO 9001:2015 for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Packaging and preservation must comply with MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-12000. Inspection and acceptance will occur at the origin, utilizing sampling methods consistent with MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
PATCH, STRUCTURAL COMPO
Solicitation # SPE4A7-26-T-699X
This contract is for the procurement of five structural component patches for aircraft, identified by NSN 1560-01-521-1168 and Boeing part number 74D115270-1005. The items are designated as critical application items and must be delivered to the DLA Distribution New Cumberland facility by May 20, 2029. The delivery terms are FOB Origin, with inspection and acceptance occurring at the destination. The supplier must adhere to several technical and quality requirements, including ISO 9001:2015 standards, CMMC Level 2 self-assessment, and specific DLA packaging and marking guidelines. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. While physical identification is required, item unique identification is not necessary per the service customer's request.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GLAND, LOWER END
Solicitation # SPE4A7-26-T-699L
This contract is a solicitation for the procurement of 15 units of Lower End Glands, identified by NSN 1620-00-083-3504 and part number HP679710 from Tactair Fluid Controls Inc. The agreement is managed by the Department of Defense under solicitation number SPE4A7-26-T-699L, with a required delivery date of March 8, 2027, and a delivery window of 171 days. Shipping is set as FOB Origin, with the final destination being DLA Distribution Jacksonville in Florida. The contract mandates strict adherence to DLA technical and quality requirements, including CMMC Level 2 self-assessment for cybersecurity and specific packaging standards per ASTM D3951 and MIL-STD-129. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the point of origin. This item is designated as a critical application item, requiring precise compliance with all identified technical and quality specifications.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
PISTON, HYDRAULIC AC
Solicitation # SPE4A6-26-T-22PU
This contract is for the procurement of 15 hydraulic accumulator pistons, identified by NSN 1650-01-533-4180 and part number 294082-4. The items are designated as critical application components and are associated with Sikorsky Aircraft Corporation and Valcor Engineering Corporation. Delivery is required within 97 days, with a need date of December 9, 2026, and a final required delivery date of June 24, 2027. The shipment is to be delivered FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including CMMC Level 2 self-assessment and specific cybersecurity protections for covered defense information. Quality assurance involves inspection and acceptance at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA requirement RP001. Item Unique Identification is not required for this specific order.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336413
New
DIBBS
HOSE ASSY, AIRCRAFT,
Solicitation # SPE4A7-26-T-649T
Solicitation SPE4A7-26-T-649T is issued by the Department of Defense, specifically the ASC Supplier Oper AE and AF Div, for the procurement of 12 aircraft hose assemblies (NSN 1680-01-584-0490). The contract is established on an FOB Origin basis, with a required delivery date of October 6, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for source approval requests, higher-level quality requirements, and the use of measuring and test equipment. Quality assurance is stringent, requiring inspection and acceptance at the origin. Sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for sample lots. Packaging must comply with MIL-STD-2073-1E and DLA RP001, while marking must follow MIL-STD-129. Additionally, the contractor must comply with hazardous material labeling standards under 29 CFR 1910.1200 and provide corresponding Safety Data Sheets. Administrative requirements include electronic invoicing via Wide Area WorkFlow (WAWF) and mandatory submission of quotations through the DIBBS portal.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-700D
This solicitation is for the procurement of two structural support units, part number 25-2323, under solicitation number SPE4A7-26-T-700D. The items are to be manufactured using a forging process, which requires specific tooling. This is a total small business set-aside contract with a delivery requirement of 169 days after receipt of order. Performance is located in Tracy, California, and the contract falls under NAICS code 336413. Compliance requirements are extensive, including CMMC Level 2 certification and adherence to ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Additional mandates include following the DLA Master List of Technical and Quality Requirements, source approval request documentation, and specific packaging and marking standards. Item Unique Identification is not required for this order.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
LONGERON
Solicitation # SPE4A5-26-T-394C
This contract is for the procurement of nine longeron units, identified as Boeing part number 65C18233-510 and NSN 1560-01-677-6525. The order is designated as a critical application item with a required delivery date of June 11, 2028, and a delivery window of 645 days. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, specifically the DLA Distribution Depot Oklahoma at Tinker AFB. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, covered defense information, and measuring and test equipment. Packaging must comply with RP001 and MIL-STD-129, with hazardous materials following TQ requirement IP025 or non-hazardous items following ASTM D3951. Quality sampling will be conducted according to MIL-STD-1916 or ASQ H1331, and item unique identification is not required for this specific order.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-26-T-238B
This contract, identified as solicitation SPE7MC-26-T-238B, is for the procurement of two valve bodies with NSN 4810-01-555-7301 and part number 15837DS3-20 from ITT Aerospace Controls LLC. The order is a total small business set-aside under NAICS code 336413, with delivery required within 160 days after order. The items are to be shipped FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. Compliance requirements include adherence to DLA packaging standards, specifically ASTM D3951 and MIL-STD-129, as well as the DLA Master List of Technical and Quality Requirements. Additionally, the contractor must comply with Cybersecurity Maturity Model Certification Level 2 self-assessment and regulations regarding covered defense information. Inspection and acceptance will take place at the destination.
DEPOT OKLAHOMA

POSTED

about 8 hours ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 336412
New
DIBBS
Supplier of Aircraft Safety Belts (NSN 1680012772876, P/N FDC-6400-145)This subcontract through the Department of Defense ASC Commodities Division requires the supply of aircraft safety belts, identified by part number FDC-6400-145 and NSN 1680012772876. The order quantity ranges from 95 to 566 units, which are classified as critical application items. The supplier must ensure all units are compliant with MIL-STD-130N marking standards and meet CMMC Level 2 cybersecurity requirements. Interested parties must submit their responses by September 7, 2026, under NAICS code 336412.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BOLT, INTERNAL WRENC
Solicitation # SPE4A6-26-T-24EE
This contract is for the procurement of 200 internal wrenching bolts, identified as NSN 5306002065812 and part number MS20006-24. The items are classified as commercial critical application hardware and must be manufactured according to the current revision of the applicable part standards, specifically NASM20004 through NASM20024. Delivery is required within 5 days after the order, with the shipping destination being the Poland FMS Consolidation point in Huntsville, Alabama. The agreement mandates strict quality and technical compliance, including ISO 9001:2015 standards for manufacturers and CMMC Level 2 self-assessment for cybersecurity. Sampling and inspection will be conducted at the origin following MIL-STD-1916 or ASQ H1331, with specific gauging requirements for Class 3A and 3B threads. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements to ensure proper transport and identification.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-19CP
This solicitation is for the procurement of 683 turnlock fastener studs under solicitation number SPE4A6-26-T-19CP for the Department of Defense ASC Commodities Division. The items are identified as commercial products with a delivery requirement of 171 days after the order is placed. Performance is designated for Robins Air Force Base, and the contract falls under NAICS code 332510. The contract mandates strict adherence to DLA packaging requirements and technical quality standards, including specific guidelines for physical item marking and the removal of government identification from non-accepted supplies. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, requiring zero non-conformances for acceptance unless otherwise specified.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, SL
Solicitation # SPE4A6-26-T-23UX
This contract is for the procurement of nine slotted hexagon self-locking nuts, identified by NSN 5310-00-047-2394 and part number MS21225-6. The items are classified as critical application items and must adhere to technical specifications including NASM21225 Revision 3 and MIL-DTL-32258. Delivery is required within 20 days, with the original required delivery date set for April 23, 2026. The shipment is to be handled via a freight forwarder in Jacksonville, Florida, for final delivery to the Commanding Officer at the RSNF Naval Supply Center in Jubail, Saudi Arabia. Quality and compliance are governed by DLA master lists, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively, while palletization must follow DLA packaging requirements. The contract specifies a zero percent quantity variance and establishes the inspection and acceptance points at the point of origin.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-23UY
This contract is for the procurement of machine screws, specifically part number NAS517-3-18 under NSN 5305-00-515-7460. The order consists of four units with a delivery requirement of 20 days. The items are designated as critical application items and must adhere to technical data package specifications, including NAS517 Revision 8 and associated quality assurance provisions. Quality and inspection are managed at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA packaging requirements. The shipment is destined for the Fuerza Aerea de Chile in Santiago, Chile, via the CEVA Air and Ocean USA freight forwarder in Miami, Florida.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24AG
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-24AG, is for the procurement of 20 machine screws identified by NSN 5305-01-463-4131. The item is classified as a Commercial Off The Shelf product and must be delivered within 20 days after the order is received. The contract requires adherence to DLA packaging requirements and technical quality standards as specified in the DLA Master List. Additionally, the supplier must ensure the removal of government identification from any non-accepted supplies. Responses to this solicitation are due by September 4, 2026, and the primary point of contact for this acquisition is Lisa Harvie.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-23YQ
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 5995017077985 and HII Unmanned Systems Inc part number 153176. The item is designated as a critical application item, and the government has specified that surplus materials are not acceptable. Delivery is required within 20 days of order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination in Virginia Beach, VA. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-based sampling approach for acceptance. Additionally, the contractor must comply with covered defense information regulations and specific requirements for the removal of government identification from non-accepted supplies.
Current-Carrying Wiring Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 444180
New
DIBBS
CABLE ASSEMBLY, SPEC
Solicitation # SPE4A6-26-T-24EB
This contract is for the procurement of one special purpose electrical cable assembly, identified by NSN 5995016290046. The item is associated with General Dynamics Information 58672 P/N 100349201-1 and Electric Boat Corporation 96169 P/N 218081352. Delivery is required within 106 days, with a need ship date of December 20, 2026, and an original required delivery date of April 5, 2027. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, with FOB origin terms and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. A critical environmental restriction is in place prohibiting the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, or packaging, except where functionally required by specific NAVSEA standards.
Other Building Material Dealers

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332112
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-23UZ
This contract is for the procurement of 379 machine screws under solicitation number SPE4A6-26-T-23UZ, identified by NSN 5305010945716. The items are designated as critical application items and are associated with part number SS5012-4-45 from approved sources including Sikorsky Aircraft Corporation, Hartford Aircraft Products, and Rotair Aerospace Corp. Delivery is required within 171 days, with a need ship date of February 23, 2027, and an original required delivery date of June 3, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination. The contract specifies a zero percent quantity variance and mandates adherence to the DLA Master List of Technical and Quality Requirements.
Nonferrous Forging

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-23ZU
This contract is a solicitation from the Department of Defense, specifically the ASC Commodities Division, for the procurement of one plain hexagon nut under NSN 5310-01-692-1534. The delivery requirement is set for 20 days after order. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for packaging and the removal of government identification from non-accepted supplies. Quality assurance and sampling must adhere to MIL-STD-1916, ASQ H1331, or comparable zero-based sampling plans. Additionally, the contract is subject to strict export controls under ITAR and EAR regulations, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access technical data.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24CT
This contract is for the procurement of machine screws under solicitation SPE4A6-26-T-24CT, with a total quantity of 50 packages, each containing 100 pieces. The items are identified by NSN 5305-00-901-3782 and must adhere to specific technical standards, including NASM27039 Revision 6 and NASM7839 Revision 2. As a critical application item, the screws must meet strict gauging requirements for Class 3A and 3B threads per FED-STD-H28/20 and comply with MIL-STD-130N for physical identification and marking. Delivery is required within 20 days, with the original required delivery date set for May 21, 2025. The contract specifies FOB Origin for both inspection and acceptance. Packaging and palletization must follow MIL-STD-2073-1E and DLA packaging requirements, with final shipment directed to the RTN Air Wing in Thailand via the designated freight forwarder, FMS Logistics LLC. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and a Certificate of Quality Compliance is required.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-24AA
This contract is for the procurement of 246 retaining rings under solicitation SPE4A6-26-T-24AA for the Department of Defense. The items are identified by NSN 5325-00-205-4727 and must adhere to technical drawings 19207 7709323. Delivery is required within 75 days, with a need date of November 19, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The procurement is designated as a Critical Application Item and requires Tailored Higher Level Quality requirements, including source inspection. Quality assurance follows specific sampling methods such as MIL-STD-1916 or ASQ H1331, and packaging must comply with MIL-STD-2073-1E and RP001. While certificate of conformance procedures are authorized, Item Unique Identification is not required for this specific order.
Hardware Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details