Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Duct Assembly Manufacturing – Air Duct Assembly (NSN 1660016046677)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the manufacture and delivery of a single specialized Air Duct Assembly identified by NSN 1660016046677, intended for integration into defense systems. The work is classified as a subcontract under NAICS code 332996 and is issued by the Defense Logistics Agency under the Department of Defense. The deliverable is limited to the production and handover of the unit; no installation, field service, or on-site support is required. The solicitation was posted on July 17, 2026, and the place of performance and office address details are not specified. The contract remains active under the DIBBS system with a reference to award SPRPA121GCF01 and delivery order SPE4A526F2536.

General Info

Manufacture and delivery of one Air Duct Assembly NSN 1660016046677 for defense systems, no installation or support required.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of one unit of a specialized Air Duct Assembly (NSN: 1660016046677) for integration into defense systems. No installation or field service is required.

Similar Contracts

Same NAICS industry code

28--LEVER PLATE SPECIALThe Government is seeking to procure three units of the NSN 1H-2825-014815072-X3, identified as a 28–LEVER PLATE SPECIAL, under a sole-source contract authorized by FAR 6.302-1 due to the unavailability of competitively sourced alternatives. The Government does not own or have access to the technical data rights necessary to procure repairs or replacements from other sources, and both acquiring those rights and reverse engineering the part have been deemed uneconomical. Deliveries are required to two designated locations: W25G1U at DLA Distribution in New Cumberland, Pennsylvania, and W62G2T at DLA Distribution in Tracy, California. Although this notice is not a request for competitive bids, interested parties may submit capability statements or proposals within 45 days of the publication date, or 30 days if awarded under an existing Basic Ordering Agreement, to be considered for award. The Government reserves the right to determine whether competition is feasible based on submissions and will only award if the offeror, product, or manufacturer meets all qualification requirements at the time of award, as per FAR clause 52.209-1. Market research confirms that the acquisition does not fall under FAR Part 12 commercial item procedures, though vendors may still indicate if they can provide an equivalent commercial item within 15 days of notice. All inquiries and qualification details must be directed to the primary point of contact, Melissa A. Farness, at NAVSUP Weapon Systems Support Mech in Mechanicsburg, Pennsylvania.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Mechanical Seal and Gasket SupplyPetrojam Limited, acting on behalf of the Government of Jamaica, has issued a subcontract for the supply of high-performance mechanical seals, O-rings, gaskets, and sealing materials designed specifically for use in pump systems operating in petroleum and chemical service environments. The contract is classified under NAICS code 332996, indicating it pertains to other fabrication industries related to machinery and components, and emphasizes the need for durable, chemically resistant, and high-pressure-rated sealing solutions that meet the rigorous demands of industrial processing and offshore operations. All materials must be fully compatible with aggressive fluids, elevated temperatures, and continuous operational conditions typical in energy and petrochemical applications. The contract was posted on July 25, 2026, and is accessible via the Government of Jamaica’s electronic procurement portal, with no set-aside or small business preferences indicated. Performance is expected to support operations within Jamaica’s energy infrastructure, though specific delivery locations or performance metrics are not detailed in the available data. Contractors must ensure compliance with industry standards for material integrity, leakage prevention, and long-term reliability, with no point of contact listed for inquiries, suggesting all communications must be handled through the official e-procurement platform linked in the notice.

Petrojam Limited

POSTED

DEADLINE

Manufacturing of Quick Disconnect Coupling Half (NSN 4730-01-399-0241)The contract entails the full-scale manufacturing of a military-specification quick disconnect coupling half, adhering strictly to Army Drawing 19207-12342947 and SQAP013990241, ensuring compliance with all defense-grade quality and performance standards. Production must encompass not only the fabrication of the component but also integrated surge and sustainment planning to support long-term operational readiness and logistics requirements for the U.S. military. The item is designated by NSN 4730-01-399-0241 and falls under NAICS code 332996, indicating specialized manufacturing within the defense supply chain. This is a subcontract opportunity issued by LAND SUPPLIER OPERATIONS SMSG under the Department of Defense, with a response deadline of August 23, 2026, and a posted date of July 24, 2026. The contract does not specify a set-aside designation, meaning it is open to all eligible contractors, and no point of contact or place of performance details are provided. All production activities must meet rigorous military specifications, and successful proposers are expected to demonstrate capacity for consistent, high-volume output, quality assurance, and supply chain reliability to sustain operational needs over time.

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

Defense-Grade O-Ring Supply and DeliveryThe contract requires the manufacture or procurement, packaging, and delivery of 130 defense-grade O-rings identified by NSN 5331015349099, meeting exact military specifications for use by the Department of Defense. The delivery must be made FOB origin to DLA New Cumberland, with a strict deadline of 161 days from the date of order issuance. The procurement is categorized as a subcontract under NAICS code 332996, indicating a specialized manufacturing process aligned with defense standards. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, 17070-5002. All work must ensure full compliance with defense-grade requirements and be completed within the established timeline to satisfy operational needs.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling (Supplier Opportunity)The contract requires suppliers to provide PIN-RIVET hardware components that meet stringent military packaging and labeling standards, ensuring full compliance with federal regulations for hazardous materials. All shipments must include accurate hazardous materials disclosures and proper GHS labeling where applicable, aligning with Department of Defense requirements for safety and traceability throughout the supply chain. The components are destined for performance at Hill Air Force Base with a zip code of 84056-5734, and the supplier must be prepared to comply with all technical, documentation, and logistical specifications tied to military-grade procurement. This subcontract opportunity is open for response until July 29, 2026, and falls under NAICS code 332996, indicating it involves other fabricated metal product manufacturing. The contracting office is the ASC Commodities Division under the Department of Defense, and while no set-aside designation is specified, the solicitation is publicly accessible via the DIBBS platform. Suppliers must ensure their capabilities include not only manufacturing or sourcing compliant hardware but also rigorous adherence to labeling, packaging, and disclosure protocols as mandated by military standards, with no flexibility for non-compliant deliveries.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Precision Filter Assembly and ManufacturingThe contract requires the manufacture and assembly of a RETURN FILTER ASSY with National Stock Number 1680-01-583-4352, following authorized source specifications tied to CAGE code 18350 and part number CE01233F1. This includes end-to-end production responsibilities such as sourcing raw materials, precision machining, integration of filtration media, and strict configuration control to ensure compliance with technical standards. All work must be performed in accordance with the defined quality and procedural requirements to meet defense-grade performance criteria. This is a small business set-aside contract under the SBA program, classified under NAICS code 332996 for other fabricated metal product manufacturing, and is issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The solicitation was posted on July 24, 2026, with a response deadline of August 7, 2026, and is structured as a subcontract opportunity. The place of performance and point of contact details are not specified, but the procurement is accessible through the DIBBS platform using the provided reference link.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Aerospace Connector Supply (NAS554-8)Six units of the MULTIPLE CONNECTOR, part number NAS554-8, are required to be supplied and delivered in full compliance with SAE AS4841 and NAS554 Rev 4 technical specifications. Each unit must be packaged according to MIL-STD-2073-1E standards and marked in accordance with MIL-STD-129 requirements to ensure proper identification, handling, and logistics integration within the Department of Defense supply chain. The contract is structured as a subcontract under the NAICS code 332996, issued by the Maritime Supply Chain ESOC Buys division of the Department of Defense, with a response deadline of July 29, 2026, and a posted date of July 24, 2026. All deliverables must meet rigorous aerospace connector performance and documentation criteria to support mission-critical applications.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Vacuum Bleed Filter Supply (NSN: 2990-01-513-6153)The contract specifies the supply of thirteen Vacuum Bleed Filters with part number 23055917-28 and national stock number 2990015136153, manufactured to meet stringent Department of Defense technical, quality, and traceability standards for use in critical aerospace systems. All units must comply with exacting performance and documentation requirements to ensure reliability and safety in high-stakes operational environments. The procurement is classified as a subcontract under NAICS code 332996, indicating it falls under other miscellaneous manufacturing. Performance is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the contract awarded by the Land Supplier Operations Engines division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered.

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Crimped Expander Piston Ring SupplyThe contract requires the manufacture and supply of four crimped expander piston rings that must meet rigorous military specifications, ensuring full compliance with Defense Logistics Agency technical standards and packaging guidelines. These components are critical for high-performance applications and must be produced to exacting tolerances in accordance with DLA requirements to guarantee reliability and operational readiness under demanding conditions. Precision manufacturing, material certification, and adherence to approved quality control protocols are essential to satisfy the technical demands of the procurement. The solicitation, issued under the NAICS code 332996 for other fabricated metal product manufacturing, is structured as a subcontract opportunity with a response deadline of July 29, 2026. It is associated with the Land Supply Chain organization within the Department of Defense, and performance is to be delivered to a military postal address in FPO with ZIP code 09564. While no specific point of contact or set-aside classification is provided, all bidders must ensure their proposals align with the stated DLA technical and logistical criteria, and the submission must be made through the designated DIBBS platform to be considered valid.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Fastener ManufacturingThe contract mandates the precision manufacturing of collar and pin-rivet components to stringent military specifications for use in a critical application, requiring adherence to exact engineering and quality standards. These components are essential for mission-critical systems and must be produced with zero tolerance for deviation, ensuring reliability under extreme operational conditions. The work is classified as a subcontract under the NAICS code 332996, indicating specialized fabrication of other metal products, and performance is required at Hill Air Force Base with the zip code 84056-5734. The solicitation was posted on July 24, 2026, with a firm response deadline of July 29, 2026, allowing a tight five-day window for qualified vendors to submit proposals. The contracting entity is the ASC Commodities Division within the Department of Defense, which oversees procurement for defense-related fastener systems. Although no set-aside designation or point of contact is listed, the contract’s high-stakes nature implies rigorous evaluation of technical capability, quality control processes, and production scalability. Subcontractors must demonstrate proven experience in military-grade fastener fabrication and compliance with all applicable defense manufacturing protocols.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CONNECTOR, MULTIPLE,The contract pertains to the procurement of a MULTIPLE CONNECTOR, identified by part number NAS554-8 and NSN 4730-01-625-7039, with a requirement for six units to be delivered within five days of award. The item must comply with non-government standards NAS554 Revision 4 dated 08/26/2011 and SAE AS4841 Revision D dated 04/01/2021, and all technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements. Packaging must adhere to MIL-STD-2073-1E, with specific packaging codes, materials, and methods outlined, and marking must conform to MIL-STD-129 without special marking codes. Palletization follows DLA packaging requirements, and the delivery is FOB origin with zero variance allowed in quantity. Inspection and acceptance occur at origin, and a Certificate of Conformance is authorized unless superseded by a Quality Assurance Letter of Instruction. The contract specifies the freight forwarder as Northrop Grumman Corp at a staging area in Melbourne, FL, with a final delivery destination in France. The purchase request number is 7016347413, unit price is $6.00 per each, totaling $36.00, and the original required delivery date is July 25, 2024. The solicitation number is SPE7M0-26-T-6925, issued under full and open competition with no set-aside, and the NAICS code is 332996. The contract is managed by the Department of Defense’s Maritime Supply Chain ESOC Buys office.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

BOLT, FLUID PASSAGEThe contract solicitation SPE7M4-26-T-256H calls for 14 units of BOLT, FLUID PASSAGE with NSN 4730-01-460-5325, a restricted-source item manufactured exclusively to OEM drawings, with only prequalified sources eligible to respond. Delivery is required within five days of order placement to Tinker AFB, Oklahoma, with FOB Origin terms and inspection and acceptance also performed at origin. The item must comply with stringent marking requirements per MIL-STD-130, including NSN, part number, manufacturer’s CAGE code, date of manufacture, and the “FOR MILITARY USE ONLY” designation, while packaging and labeling adhere to ASTM D3951, RP001, and MIL-STD-129 with standardized barcoding for logistics automation. Safety and environmental compliance is mandated through DFARS clauses prohibiting hexavalent chromium, hazardous material storage, and toxic substance disposal, alongside mandatory submission of Safety Data Sheets aligned with OSHA HazCom standards. Cybersecurity requirements are extensive, including implementation of NIST SP 800-171 controls via clause 252.240-7997, safeguarding covered defense information per 252.204-7012, and reporting cyber incidents immediately; the contractor must be CMMC Level 2 certified. Prohibitions extend to acquisition of telecommunications equipment from designated Chinese military companies and use of mandatory arbitration agreements. The contract mandates electronic invoicing via WAWF and requires offerors to provide their UEI and CAGE code, with full socioeconomic and small business status representations submitted. All submissions are strictly electronic through DIBBS by the July 29, 2026 deadline, and while pricing data is unspecified, historical unit costs suggest a variable range. The contract type remains undetermined pending award, but it includes standard FAR and DFARS clauses on payment acceleration, subcontracting, changes, defaults, and contractor liability, with administrative details like DoDAAC and point of contact to be finalized upon award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier Data Collection and Representation ManagementThe contract requires coordination with subcontractors and suppliers to gather and verify essential business representations including size status, socioeconomic classification, ownership details, and valid CAGE or UEI codes, ensuring all submissions meet current Federal Acquisition Regulation requirements and are accurately reported in SAM.gov. This effort is critical to maintaining compliance across the supply chain and supporting accurate government contracting data integrity. The work is scoped under a subcontract arrangement with a NAICS code of 541611, focused on administrative management and general management services, and falls under the jurisdiction of the Defense Logistics Agency within the Department of Defense. All responses must be submitted by the specified deadline of July 29, 2026, with no set-aside criteria identified, meaning the opportunity is open to all eligible entities regardless of size or status.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Hazardous Materials and Radioactive Materials Compliance SupportThe contract requires comprehensive documentation and labeling support for shipments containing hazardous or radioactive materials, ensuring full compliance with federal and military standards. Key responsibilities include preparing Material Safety Data Sheets, applying MIL-STD-129 labeling requirements, and providing timely advance notifications to government agencies to facilitate safe handling and regulatory adherence. The work demands precision and strict adherence to safety protocols to mitigate risks associated with transporting dangerous substances. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, and is classified under NAICS code 541620 for other scientific and technical consulting services. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a short window for qualification and submission. Performance location details are unspecified, but the nature of the work implies nationwide or global logistical coordination with U.S. government entities. Contractors must demonstrate expertise in hazardous materials compliance and be prepared to interface directly with defense and regulatory authorities to meet mission-critical shipping requirements.

Environmental Consulting Services

POSTED

DEADLINE

NIST SP 800-171 Compliance Assessment and SPRS Submission SupportThe contract requires the performance or validation of NIST SP 800-171 cybersecurity assessments for both prime contractors and subcontractors to ensure compliance with Department of Defense cybersecurity standards. This includes conducting thorough evaluations of security controls, preparing detailed documentation that supports each assessment, and submitting the final results to the Supplier Performance Risk System to maintain proper federal recordkeeping and visibility into contractor security posture. The work must be executed with precision to meet the stringent requirements set forth by the DoD and support the integrity of the defense supply chain. The effort is classified as a subcontract under NAICS code 541690, and it is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline set for July 29, 2026, indicating an expedited procurement timeline. There is no specified place of performance or set-aside designation, and the work may be performed remotely or at various locations depending on contractor and subcontractor arrangements. Completion of this task is critical to maintaining contractual compliance and ensuring that all entities working on DoD-related projects adhere to standardized cybersecurity frameworks as mandated by federal policy.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Telecommunications Compliance Disclosure ServicesThe contract requires support services to assist the prime contractor in complying with federal regulations under FAR 52.204-25 and 52.204-26 regarding covered telecommunications equipment and services. This includes identifying, documenting, and submitting mandatory disclosures by gathering critical data such as brand and model numbers, OEM or part numbers, justifications for equipment use, and active UEI and CAGE codes. The work involves ensuring all telecommunications-related items used in federal contracts are vetted against prohibited sources and that comprehensive records are maintained to demonstrate compliance with national security directives. The contract is classified as a subcontract under the NAICS code 541611 for management consulting services and is issued by the Defense Logistics Agency within the Department of Defense. The solicitation was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for proposal submission. The place of performance and specific office location are not specified, suggesting potential remote or nationwide execution. The work is essential to maintaining eligibility for DoD contracts and avoiding penalties associated with noncompliance on telecommunications sourcing.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

DEADLINE

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Testing Laboratories and Services

POSTED

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

DEADLINE

Domestic Ocean Transportation LogisticsThe contract requires the arrangement of ocean transportation for a valve to a FPO destination using U.S.-flag vessels, with provisions allowing for foreign-flag vessel use only if appropriate waiver documentation is submitted and approved. This transport task falls under the North American Industry Classification System code 483111, indicating a focus on inland water freight transportation but applied here for ocean logistics in support of Defense Logistics Agency requirements. The solicitation is structured as a subcontract and is issued under the Department of Defense, specifically managed by the Defense Logistics Agency, with performance required to FPO 09523, a military postal address typically used for overseas installations. The solicitation was posted on July 24, 2026, and responses must be submitted by July 29, 2026, allowing a five-day window for proposal preparation and submission. There is no set-aside designation specified, meaning the opportunity is open to all eligible contractors without preference for small businesses or other categories. The place of performance is identified only by the FPO zip code, indicating delivery to a military recipient in an overseas or remote location, potentially requiring coordination with military logistics networks. The contract emphasizes adherence to U.S. flag vessel requirements unless an approved waiver is obtained, highlighting compliance with U.S. maritime regulations and government procurement policies governing the use of domestic vessels for defense-related shipments.

Deep Sea Freight Transportation

POSTED

DEADLINE

Export Control Advisory for Technical DataThe contract seeks expert advice on compliance with U.S. export control regulations, specifically the International Traffic in Arms Regulations and the Export Administration Regulations, as they apply to technical data related to a valve. This includes interpretation and application of deemed export rules, which govern the transfer of controlled technical information to foreign nationals within the United States, as well as determination of necessary authorizations or licenses for any such transfers. The scope requires a thorough understanding of how technical data associated with the valve is classified under U.S. defense and dual-use control lists and the procedural steps to ensure lawful handling, documentation, and dissemination in accordance with federal requirements. The contract is structured as a subcontract under the Department of Defense, administered by the Defense Logistics Agency, with performance expected to be conducted at a U.S. military post office address in FPO with ZIP code 09523. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026. The North American Industry Classification System code 541611 indicates the work falls under management consulting services, underscoring the advisory nature of the engagement. No set-aside preferences are specified, and the requirement demands specialized knowledge in export compliance to support lawful technical data management for defense-related hardware.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE