Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

DUCT, COMPRESSOR, AIR

Active
SPE4A7-26-T-713SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified as SPE4A7-26-T-713S, is for the procurement of one air compressor duct with part number 2840-01-532-2998. The contract is issued by the Department of Defense under the ASC Supplier OE and AF Division and is designated as a total small business set-aside. The required delivery timeframe is 51 days after order, with the place of performance located in Tracy, California. Compliance requires strict adherence to the listed drawing and the DLA Master List of Technical and Quality Requirements. Key mandates include CMMC Level 2 certification, source approval request documentation, and specific packaging and marking standards. Additionally, the item is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce.

General Info

DoD small business set-aside for one air compressor duct delivered to Tracy, California.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

SBA

Documents

(1)

SPE4A7-26-T-713S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
Ariana Burnett
contact@example.gov

Full Description

Show more
DUCT,COMPRESSOR,AIR
DUCT, COMPRESSOR, AIR
THE TECHNICAL/QUALITY/TEST REQUIREMENTS FOR
CITED P/N WILL BE IN CONFORMANCE WITH
THE LISTED DRAWING.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been
SPE4A7-26-T-713S
SECTION B
approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2840-01-532-2998 Quantity: 1 EA Purchase Request: 7016644441QTY: 1 Delivery: 51 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336412
New
DIBBS
FILTER ELEMENT, FLUI
Solicitation # SPE4A7-26-T-692L
The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-T-692L for the procurement of six fluid filter elements. The items are identified by NSN/Part Number 2945-01-733-4935 and are associated with purchase request 7014684691. This federal solicitation was posted on August 25, 2026, with a response deadline set for September 2, 2026. Interested parties can find further details and submission guidelines through the DIBBS portal.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE7M1-26-T-325L
Solicitation SPE7M1-26-T-325L, issued by the Department of Defense Maritime Supply Chain, requires the procurement of four units of part number 0001S00000062. The contract stipulates a delivery timeline of 350 days after receipt of order and falls under NAICS code 336412. The contractor must adhere to strict Production Lot Testing requirements, including the submission of a PLT report to the Quality Assurance Representative for review. Required shipping documentation includes DD Form 1222, DD Form 250/iRAPT receiving reports, material and process certifications, and detailed test reports verifying that actual results meet the tolerances specified in the technical data package.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336412
New
DIBBS
NOZZLE, STARTER FUEL
Solicitation # SPE7LX-26-U-9592
This contract solicitation, identified as SPE7LX-26-U-9592, is issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of starter fuel nozzles used on CH-47 Chinook helicopters. The requirement is for an estimated quantity of 55 units under NSN 2910009192022, with approved part numbers including Collins Engine Nozzles Inc 970-2 and RTX Corporation 915914C1. This is a total small business set-aside under NAICS code 336412, and the solicitation may result in a one-year indefinite delivery contract below the simplified acquisition threshold. Key delivery and quality terms specify a delivery window of 74 days after order, with shipping handled FOB Origin and inspection and acceptance occurring at the destination. The items are designated as critical application items and must adhere to strict technical and quality requirements, including DLA packaging requirements and MIL-STD-129 labeling. Packaging must comply with ASTM D3951, though DLA Master List requirements take precedence. The solicitation was posted on August 18, 2026, with a response deadline of September 2, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336412
New
DIBBS
SHAFT ASSEMBLY, FUEL CO
Solicitation # SPE4A5-26-T-402U
This contract is for the procurement of 50 units of a fuel control shaft assembly, identified by NSN 2840-01-014-1882 and part number 3240348. The item is designated as a critical application item with associated parts from Honeywell International Inc and VSE Aviation Inc. Delivery is required within 200 days, with the final destination and acceptance point located at DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to various technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific DLA packaging and marking standards. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331. The contract specifies a zero percent quantity variance and requires compliance with configuration change management and physical identification standards, although item unique identification is not required by the service customer.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
BLADE SET, TURBINE, AIRC
Solicitation # SPE4A5-26-T-402R
This solicitation for the Department of Defense involves the procurement of four units of item 2840 / 11934386 with a delivery timeline of 877 days after order. A critical requirement of this contract is the First Article Testing (FAT) for one unit, which requires the contractor to provide written notice to the contracting officer and QAR at least 14 calendar days before shipment. The contractor must submit the first article test report within 30 calendar days of the contract date, after which the government has 45 calendar days to provide a written decision on approval. Offerors must comply with domestic material restrictions, including the Berry Amendment and the Buy American Act, and must certify that no covered telecommunications equipment or services will be provided. The solicitation encourages the submission of quantity ranges due to volatile demand and prohibits the use of additive manufacturing unless specifically authorized. Additionally, all contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
ADJUSTING SHAFT, FUE
Solicitation # SPE4A7-26-T-712K
This solicitation, issued by the Department of Defense through the ASC Supplier Oper AE and AF Div, is for the procurement of one fuel adjusting shaft under NSN 2995-01-129-8277. The contract is a total small business set-aside with a delivery requirement of 183 days after the order date. Performance is designated for Cherry Point, and the solicitation is managed by the Defense Logistics Agency. The agreement is subject to stringent technical and quality requirements, including CMMC Level 2 certification and specific DLA packaging and inspection standards. Notably, the item contains technical data governed by ITAR and EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the necessary data. Compliance with DFARS 252.225-7048 is mandatory for the handling of this controlled technical information.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
SCREW ASSEMBLY, PANEL
Solicitation # SPE4A6-26-U-3711
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of 342 units of panel screw assemblies, identified by NSN 5305-01-620-4959. The contract is set aside for Women-Owned Small Businesses under NAICS code 336412, with a required delivery timeframe of 55 days after the order is placed. Compliance requirements include CMMC Level 2 self-assessment, adherence to covered defense information protocols, and specific DLA packaging and physical identification standards. Quality assurance will be governed by MIL-STD-1916 or ASQ H1331 sampling methods, requiring zero non-conformances for acceptance. Technical and quality requirements are further detailed in the DLA Master List and specific source approval request documentation.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336412
New
DIBBS
FUSIBLE ALLOY
Solicitation # SPE86-26-T-2187
This contract is for the procurement of 54 one-pound ingots of Fusible Alloy, specifically the Bolton 174 Alloy 5700-1, under part number LB250002. The material composition is strictly defined with a maximum weight of 57 percent bismuth, 26 percent indium, and 17 percent tin. The order is managed by DLA Distribution San Joaquin and requires the items to be delivered FOB Origin to a receiving warehouse in Tracy, California, with a required delivery date of January 24, 2027. Compliance requirements include the application of adhesive labels on both sides of each ingot and adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. The contract incorporates specific DLA technical and quality requirements, including hazardous materials shipping protocols and the removal of government identification from non-accepted supplies. Inspection and acceptance will occur at the destination.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336412
New
DIBBS
COVER ASSEMBLY, AIRC
Solicitation # SPE4A5-26-T-402B
This contract is for the procurement of one aircraft cover assembly, identified as NSN 2840014869346 and Honeywell part number 3617792-1. The item is designated as a critical application item and must be delivered within 20 days after the order is placed. Delivery is FOB Origin, with the final destination being the Parts-Attach General Depot in Tainan City, Taiwan. The agreement mandates strict adherence to various technical and quality requirements, including CMMC Level 2 self-assessment, covered defense information protocols, and specific DLA packaging and marking standards. Inspection and acceptance will occur at the origin. Quality assurance sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
Federal
NSN: 2915007821759 SPRAYBAR,PILOT AFTERBURNER
Solicitation # SPRTA126R0355
The contract pertains to the procurement of 1,115 Spraybar, Pilot Afterburner units with NSN 2915007821759 and part number 5011T29P01, manufactured to AMS 5362 material specifications and measuring 4.5 inches in length, 2 inches in width, 2.5 inches in height, and weighing 0.25 pounds. The part is designed to initiate afterburning and prevent afterburner blowout in J85/T-38 engines. Delivery is scheduled in three installments: 557 units on January 6, 2027, another 557 on February 6, 2027, and one unit on March 6, 2027, all shipped to location SW3211. The solicitation closed on July 9, 2026, following an issue date of June 24, 2026, with an anticipated award date 90 days after issuance. Only Collins Engine Nozzles, Inc., with CAGE 71895, is designated as a qualified source, and acquisition is restricted to this source due to the absence of technical data, government data rights, or viable alternatives under DoD-STD-100, justifying a non-competitive procurement under FAR 6.302. UID requirements are applicable, export control is not a concern, and no small business set aside is in effect. The Government's obligation is contingent on funding availability, and electronic submission via SAM.gov is mandatory. Proposals will be evaluated based on price and past performance, and while any responsible source may submit an offer, the Government retains sole discretion not to open competition. A contracting officer liaison, Clifford Dockter, is available for inquiries, and an Ombudsman is appointed to address concerns during proposal development without influencing selection decisions.
Ok DLA Aviation At Oklahoma City

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336412
New
Federal
F110 FRAME, TURBINE, AIR, NSN: 2840-01-685-4338PR, PN: 1461M87G26
Solicitation # SPRTA1-26-R-0408
The Department of Defense, through the DLA Aviation office at Tinker AFB, has issued a presolicitation for a sole source acquisition of F110 frame turbine air components. The specific parts are identified by NSN 2840-01-685-4338PR and part number 1461M87G26, falling under NAICS code 336412. This procurement opportunity, identified by solicitation number SPRTA1-26-R-0408, was posted on September 2, 2026, with a response deadline of October 19, 2026. The place of performance for this contract is located in Cincinnati, Ohio, and the primary point of contact for the acquisition is John Nolan.
Ok DLA Aviation At Oklahoma City

POSTED

about 22 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 336412
New
Federal
Nozzle Fuel Injection
Solicitation # SPRTA126R0397
Solicitation SPRTA126R0397, issued by the Department of Defense through the DLA Aviation office at Tinker AFB, Oklahoma, seeks the procurement of nozzle fuel injection components. The opportunity is categorized under NAICS code 336412 and was posted on September 2, 2026, with a response deadline of October 2, 2026. James Headington serves as the primary point of contact for this requirement. A critical component of this contract involves adherence to Special Packaging Instruction F WF-117-2012 for fuel devices containing residual fuel. This instruction mandates strict compliance with hazardous material regulations, requiring the use of leak-proof liners, absorbent materials, and robust outer containers. All shipments must be marked as UN3363, Dangerous Goods in Apparatus, Class 9, and must comply with MIL-STD-2073 for preservation and MIL-STD-129 for marking to ensure safe handling and regulatory compliance during transport and storage.
Ok DLA Aviation At Oklahoma City

POSTED

about 22 hours ago

DEADLINE

in 29 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-713K
This contract is a solicitation for the procurement of four elevator panel assemblies under solicitation number SPE4A7-26-T-713K. The delivery requirement is set for 531 days after the order is placed, with performance located at Robins Air Force Base. The acquisition is managed by the Defense Logistics Agency and adheres to specific technical and quality requirements, including DLA packaging standards, physical item marking, and strict sampling methods based on MIL-STD-1916 or ASQ H1331. The agreement includes stringent security and compliance mandates, such as Cybersecurity Maturity Model Certification Level 2 and the protection of covered defense information. Because the item involves technical data subject to ITAR or EAR export controls, distribution is limited to approved contractors with US/Canada Joint Certification Program certification. Inspection and acceptance will occur at the origin, and while item unique identification is not required, the contractor must comply with all specified government identification and documentation requirements for source approval.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-714F
This contract is for the procurement of 64 sleeve spacers under solicitation number SPE4A7-26-T-714F for the Department of Defense. The items are identified by NSN 5365-01-499-4061 and correspond to part number 2159034-1 from CAES Systems LLC and Artman and Artman Inc. Delivery is required within 149 days, with a need ship date of February 7, 2027, and shipment is directed to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific standards for packaging, marking, and configuration management. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied to ensure compliance. Packaging and palletization must follow MIL-STD-2073-1E and RP001 requirements, and marking must comply with MIL-STD-129.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATE
Solicitation # SPE4A7-26-Q-1082
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of 10 plate spacers, identified by NSN 5365-00-351-2582. The contract is a total small business set-aside with a delivery requirement of 200 days after the order is placed. Technical and quality requirements are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to ITAR or EAR restrictions, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification and complete specific DLA training and questionnaires.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
LEAD ASSEMBLY, ELECTRIC
Solicitation # SPE4A7-26-T-714R
This contract is for the procurement of electrical lead assemblies, identified by NSN 5995011409058. The total order consists of 89 units divided into two line items: 27 units for delivery to DLA Distribution Albany and 62 units for delivery to DLA Distribution Barstow. The required delivery date is January 31, 2027, with a need ship date of March 1, 2027, and a delivery timeframe of 171 days. The items are classified as commercial products and must adhere to strict quality and packaging standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional components like batteries or sensors. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331 standards.
Other Electronic Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
FLAP HINGE
Solicitation # SPE4A7-26-T-691M
This solicitation from the Department of Defense, specifically the ASC Supplier OE and AF Div, is for the procurement of 16 flap hinges under part number 1560-00-560-4014. The contract requires adherence to specific standards for measuring and test equipment, documentation for source approval, and DLA packaging requirements. Delivery is expected within 222 days after receipt of order, with the place of performance located at Tinker AFB. A critical component of this contract is the strict adherence to export control regulations, as the technical data is subject to ITAR or EAR restrictions. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required DOD export-controlled technical data training and questionnaires. Failure to comply with these regulations, including the disclosure of data to foreign nationals, is strictly prohibited under DFARS 252.225-7048.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-714G
This contract is for the procurement of one grooved clamp coupling, identified by NSN 5342-00-316-9180. The item is classified as a commercial product and a critical application item, with approved sources including Eaton Corporation, V I J Corporation, Voss Industries, and The Boeing Company. Because the item may require specific casting or forging tooling that the government does not possess, and because the technical data package is proprietary or insufficient for competitive procurement, suppliers must adhere to strict configuration control and technical requirements. The agreement mandates compliance with various DLA quality and technical standards, including specific requirements for measuring and test equipment, physical identification, and documentation for source approval. Sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Packaging and marking must align with MIL-STD-2073-1E, MIL-STD-129, and RP001. Delivery is set for five days after receipt of order, with the final destination being the Hellenic Air Force 201 Supply Depot in Greece.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
BUSHING BLANK
Solicitation # SPE4A7-26-T-713N
This contract is for the procurement of 12 units of bushing blanks, identified by NSN 5365015939579 and part number 720-5001-15, sourced from Mason Electric Company. The agreement specifies a delivery timeframe of 86 days after order, with a required delivery date of December 26, 2027, and a need ship date of December 6, 2026. The items are designated as critical application items and are to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a requirement for zero non-conformances in sample lots. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must adhere to DLA packaging requirements. The contract incorporates technical and quality requirements from the DLA Master List and specifies that the material has no shelf life requirement. Inspection and acceptance will take place at the destination.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, LOCK, SERRATED
Solicitation # SPE4A7-26-T-692W
The Defense Logistics Agency, under the Department of Defense, has issued solicitation SPE4A7-26-T-692W for the procurement of 1,335 serrated lock rings. These components are identified by NSN/Part Number 5365-00-485-0777 and are requested under purchase request 7017940191. The solicitation was posted on August 25, 2026, with a response deadline set for September 2, 2026. This federal contract opportunity is managed through the DLA's procurement system for the acquisition of these specific hardware components.
Hardware Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 336413
New
DIBBS
MANIFOLD, FLUID, AIRCRAF
Solicitation # SPE4A7-26-T-713Z
This contract is for the procurement of one aircraft fluid manifold, identified by NSN 1630-01-423-4323 and part number MC99-22 from Circle Seal Controls Inc. or Circor Aerospace Inc. The item is designated as a critical application item and must adhere to Technical Data Package Revision A. Delivery is required within five days of order, with shipping handled via Kuehne + Nagel to the OC Supply Squadron C at RAF Brize Norton in the United Kingdom. The agreement mandates strict quality and compliance standards, including ISO 9001:2015 for manufacturers and specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, while palletization follows DLA procurement requirements. Inspection and acceptance are to take place at the origin, and the contract specifies that item unique identification is not required by the service customer.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-613H
Solicitation SPE4A7-26-T-613H is a federal procurement issued by the Defense Logistics Agency (DLA) for the acquisition of four units of SHIM (NSN/Part Number 5365-01-667-9141). The requirement is managed by the ASC Supplier Oper AE and AF Div, with a response deadline of August 12, 2026. Delivery is required 171 days after the date of order, with a target delivery date of February 10, 2027, shipped FOB Destination to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict quality and compliance standards, including inspection and acceptance at origin governed by FAR 52.246-2 and sampling plans per MIL-STD-1916 or ASQ Z1.4, requiring zero non-conformances for acceptance. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, while bare item marking must comply with RQ017. Technical data is subject to export controls under ITAR or EAR, requiring contractors to have approved US/Canada Joint Certification Program certification. Invoicing must be processed electronically through Wide Area WorkFlow (WAWF). The procurement is subject to various FAR and DFARS clauses, including NIST SP 800-171 cybersecurity requirements and the use of U.S.-flag vessels for sea transportation.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 17 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333612
New
DIBBS
TURBO SUPERCHARGER,
Solicitation # SPE4A7-26-T-692K
This contract is for the procurement of three turbo superchargers, identified by NSN 2950017144392 and part number 12645 from Banks Technologies. The agreement is managed by the Department of Defense under solicitation SPE4A7-26-T-692K, with a required delivery date of January 21, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The item is designated as a restricted source item requiring engineering source approval from the government design control activity. Compliance with DLA technical and quality requirements is mandatory, including strict prohibitions against the use of Class I ozone depleting chemicals. Packaging must adhere to ASTM D3951 and MIL-STD-129 standards, and the contract allows for Certificate of Conformance procedures per FAR 52.246-15.
Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details