Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Dynamic Friction Tester

Active
FA481926Q0077Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting quotes for a single Dynamic Friction Tester to support the Air Force Civil Engineering Center, with the requirement mandating full compliance with specified salient characteristics for a single-analyzer system. This acquisition is strictly reserved for small businesses under a 100% Small Business Set-Aside, classified under NAICS code 334519 and Product Service Code 6680. Vendors must submit complete quotes through the PIEE Solicitation Module by the deadline of 24 August 2026 at 12:00 PM CDT, including detailed pricing, estimated delivery timelines, and supporting technical documentation to prove adherence to all technical specifications. Any offers that are incomplete or received after the deadline will be disqualified from consideration. All inquiries regarding this solicitation must be submitted in writing via email no later than 17 August 2026 at 12:00 PM CDT to A1C Xzabia Kolpack and 1st Lt Brice O’Hara. Responses to submitted questions will be published as amendments on SAM.gov. The point of contact for this solicitation is Brice O’Hara, reachable via email and phone, with the contract identified by solicitation number FA481926Q0077 and posted on SAM.gov. The place of performance is Tyndall Air Force Base, Florida, ZIP code 32403, and the offering organization falls under the Department of Defense. The system is required to meet precise performance criteria as defined in the attached Salient Characteristics document, and vendors are advised to ensure full alignment with all technical and procedural requirements before submission.

General Info

Small business set-aside for single Dynamic Friction Tester at Tyndall AFB, due 24 August 2026.

Agency

Department Of Defense → FA4819 325 Cons PkpView Agency

NAICS

334519 - Other Measuring and Controlling Device ManufacturingView NAICS

Place of Performance

AFCEC READINESS AF NO MILSBILLS PROC CP, 139 BARNES DR STE 1 TYNDALL AFB, FL 32403-5325 UNITED STATES , FL, 32403

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA4819 325 Cons Pkp
Contacts1 person available
OfficeTYNDALL AFB, FL, 32403, USA
Organization / Agency
Department Of Defense → FA4819 325 Cons Pkp
View Agency Profile
Office AddressTYNDALL AFB, FL, 32403, USA
Contacts
Brice O'HARA
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is seeking quotes for the requirement of one (1) Dynamic Friction Tester in support of the Air Force Civil Engineering Center. The required analyzer system shall provide a single, Dynamic IAW the Salient Characteristics. This acquisition is being conducted as a 100% Small Business Set-Aside. The North American Industry Classification System (NAICS) code is 334519. The Product Service Code (PSC) is 6680, Interested vendors shall submit a quote demonstrating compliance with all solicitation requirements, including pricing, estimated delivery lead time, and any supporting technical literature necessary to evaluate compliance with the requirement. See attached Solicitation and Salient Characteristics. Offer Submission Deadline: 24 August 2026 at 12:00 PM CDT. Questions Deadline: All questions regarding this solicitation must be submitted in writing via email no later than 17 August 2026 at 12:00 PM CDT. Submit all questions to A1C Xzabia Kolpack at xzabia.kolpack@us.af.mil and 1st Lt Brice O?Hara at briceohara.1@us.af.mil. Answers to all questions will be posted via an amendment to SAM.gov. All offers must be submitted via the PIEE Solicitation Module. Incomplete and/or late offers will not be considered for evaluation.

Similar Contracts

Same NAICS industry code

NAICS: 334519
New
Federal
LIPTM00149 - ASE - ASE-26-___ - SSEE Mission Module Test Equipment Hardware (C)The contract pertains to the development and provision of test equipment for the SSEE Mission Module under the U.S. Navy’s Naval Information Warfare Systems command, managed by NIWC Atlantic. The effort is designated under NAICS code 334519, indicating it involves other electronic component manufacturing, specifically focused on hardware required to support testing and validation of mission-critical naval systems. Performance of the work is expected to occur in Charleston, with the contracting officer, Martha Leya, serving as the primary and secondary point of contact for all inquiries and communications regarding the procurement. The solicitation is currently in forecast status, suggesting it is a pre-solicitation announcement to gauge industry interest and prepare for a future formal bidding process. This initiative supports the Navy’s ongoing modernization and readiness goals by ensuring robust, reliable test capabilities for advanced mission modules used in naval operations.
Niwc Atlantic

POSTED

about 12 hours ago

DEADLINE

N/A
View Details
NAICS: 334519
New
Federal
TFDS (Brandywine Follow-on)
Niwc Pacific

POSTED

about 12 hours ago

DEADLINE

N/A
View Details
NAICS: 334519
New
Federal
FuelTrax IDIQ (C)The U.S. Marine Corps is seeking to acquire Fueltrax Portable Measurement Units through an indefinite-delivery, indefinite-quantity contract with a maximum ceiling of $40 million, aimed at enhancing the Fuel Automated Reporting System. The contract will be managed by Naval Information Warfare Systems Pacific under the Marine Corps Systems Command and is intended to support accurate fuel measurement and reporting across operational environments. The ordering period for this contract will span 60 months, providing flexibility to issue task orders as needed to meet evolving requirements. The performance location is designated as San Diego, and the North American Industry Classification System code is 334519, indicating the procurement involves other electronic component manufacturing. Jacob Ward serves as the primary contracting officer with Trinity Anglo as the secondary point of contact, both reachable via official Navy email addresses. The forecast was posted in August 2026, signaling the upcoming solicitation phase and potential vendor engagement to supply the required portable measurement units for Marine Corps fuel operations.
Niwc Pacific

POSTED

about 12 hours ago

DEADLINE

N/A
View Details
NAICS: 334519
New
SLED
Distance Meter
Solicitation # DASIowa-645-RFQ-2967-2027
The Iowa Department of Transportation is seeking proposals for a Distance Meter under solicitation number DASIowa-645-RFQ-2967-2027, which was posted on August 10, 2026, with a response deadline of August 18, 2026. This solicitation is targeted at state, local, and educational government entities and does not specify a set-aside classification or NAICS code. The project involves the procurement of a device or system designed to measure distance accurately, likely for use in transportation infrastructure or maintenance operations. The point of contact for inquiries is Tanner Thomsen, reachable via email at tanner.thomsen@iowadot.us. All responses must be submitted through the official bidding portal at https://bids.sciquest.com/apps/Router/PublicEvent?CustomerOrg=DASIowa, and the performance location is within the state of Iowa, though no specific city or ZIP code is provided.
Iowa

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Commercial Liquid Transmitter SupplyThe contract entails the supply of four commercial off-the-shelf liquid transmitters identified by NSN 6680011922745, fully compliant with all Department of Defense technical, packaging, labeling, and cybersecurity standards. The vendor is responsible for complete production, rigorous testing, detailed documentation, and end-to-end logistics support to ensure readiness for deployment. All deliverables must meet stringent DLA specifications, with no deviations permitted in quality or configuration. The performance location is Robins AFB, Georgia, with a response deadline of August 18, 2026, and the solicitation remains open until that time for qualified subcontractors. The NAICS code 334519 indicates classification under Other Instrument Manufacturing, and the contracting entity is the ASC Supplier Oper OEM Division under the Department of Defense, with no set-aside provisions applied.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
Supply of Pressure Dial Indicators (NSN 6685017386741)
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
SHAFT ASSEMBLY, FLEX
Solicitation # SPE4A5-26-T-338D
The contract is for the procurement of 17 units of a flexible shaft assembly, identified by NSN 6680-00-798-3059 and part number M10215-1F112, manufactured in compliance with MIL-DTL-10215P Revision P dated June 3, 2025. The item must adhere to all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with components subject to Qualified Products List or Qualified Manufacturers List qualifications. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1, or a comparable zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Zero non-conformances are required in sample lots unless otherwise specified. Packaging must conform to MIL-STD-2073-1E with preservative method 10, and marking must align with MIL-STD-129, without special markings. Palletization follows DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance occurring at destination. The required delivery date is February 26, 2027, with a 191-day lead time from contract award. The unit of issue is each, with no quantity variance permitted. The shipping destination is the DLA Distribution facility in New Cumberland, Pennsylvania. The contract solicitation number is SPE4A5-26-T-338D, issued on August 10, 2026, with proposals due by August 18, 2026, under NAICS code 334519, and is managed by the Department of Defense’s ASC Supplier Oper OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, LIQUID
Solicitation # SPE4A5-26-T-338F
The contract is for the procurement of four units of a commercial liquid quantity transmitter identified by NSN 6680-01-192-2745 under solicitation SPE4A5-26-T-338F, issued by the Defense Logistics Agency Aviation’s ASC Supplier Oper OEM Division. Delivery is required within 165 days from award to Robins AFB, Georgia, under FOB Destination terms, with all shipments addressed to SW3119 DLA Distribution Warner Robins. The item is classified as a commercial item and must comply with the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. Packaging must conform to MIL-STD-2073-1E and palletization to DLA’s RP001 requirements, while marking must follow MIL-STD-129 with no special marking code applied, and hazardous materials must be labeled per OSHA’s Hazard Communication Standard. Radioactive materials, if present, must be marked according to MIL-STD-129 when activity exceeds specified thresholds. The contract imposes significant cybersecurity, export control, and compliance obligations. Covered defense information is subject to DFARS 252.204-7012, requiring safeguarding and cyber incident reporting, and the contractor must be CMMC Level 2 certified through a C3PAO. Technical data associated with the item is subject to ITAR or EAR export controls, accessible only to contractors with approved JCP certification, completed DOD export training, and DLA authorization. The contractor must also comply with clauses on whistleblower rights, compensation restrictions for former DoD officials, prohibition of hexavalent chromium, and bans on acquiring telecommunications equipment from Communist Chinese military companies. Inspection and acceptance occur at destination under FAR 52.246-2, with sampling governed by MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise specified. Payment must be submitted electronically through WAWF using a cost voucher or invoice and receiving report depending on line item type. All quotations must be submitted via DIBBS by the closing date of August 18, 2026, and the contractor must maintain current SAM representations, including small business status and telecommunications disclosures. The contract is fixed price and incorporates deviations affecting small business representations, equal opportunity, and cybersecurity clauses.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334519
New
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-T-271A
The contract pertains to the procurement of a magnetic contactor with NSN 6110-01-493-8900, designated as a critical application item, requiring strict adherence to technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The item must be packaged in compliance with MIL-STD-129 and RP001 packaging requirements, with palletization following DLA guidelines, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for approved functional uses such as in batteries, fluorescent lights, or weapon systems specified by NAVSEA, with portable devices containing mercury required to have shockproof construction and secondary containment per NAVSEA 5100-003D. Five line items are listed under the same NSN, each for one unit at a unit price of $1.00, totaling $5.00, with delivery required FOB destination within 20 days of contract award, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. All shipments must be addressed to the designated APO address in Guam, with freight delivery instructions governed by DLAD procedural notes C19 and C20, and the original required delivery date is August 12, 2026, with one line item listed for August 11, 2026. The contract is issued under solicitation SPE7M1-26-T-271A, utilizing the DoD authorized unit of issue, with supplier compliance enforced through detailed marking, labeling, and logistical protocols.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334519
New
DIBBS
INDICATOR, SIGHT, LIQUID
Solicitation # SPE7LX-26-U-9499
The contract pertains to the procurement of an Indicator, Sight, Liquid, identified by NSN 6680-21-912-5746 and Part Number 10618078, under solicitation SPE7LX-26-U-9499, with a total quantity of 608 units to be delivered FOB origin within 128 days. The item is classified as a Critical Application Item under the control of General Dynamics Land Systems Canada and is covered under DLA Direct, CONUS. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance tied to the revision in effect on the solicitation or award date, depending on acquisition size. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs of VII, IV, and II for critical, major, and minor respectively, with unspecified attributes treated as major. Packaging must conform to MIL-STD-2073-1E with specific preservation methods and packaging codes, and marking must follow MIL-STD-129 including the special marking code for delicate instrument. The contract enforces a zero variance in quantity, with inspection and acceptance occurring at destination. The unit of issue is each, and pricing is set at a fixed rate with a total value tied to the quoted quantity. The solicitation was posted on August 10, 2026, with a response deadline of August 25, 2026, under NAICS code 334519, and is managed by the Department of Defense’s Strategic Acquisition Program Directorate.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334519
New
DIBBS
UNIAXIAL TILT METER
Solicitation # SPE7LX-26-U-9441
The contract pertains to the procurement of 24 units of a Uniaxial Tilt Meter, identified by NSN 1055-01-586-2556, under solicitation SPE7LX-26-U-9441, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The item is classified as a defense article subject to the International Traffic in Arms Regulations, mandating registration with the Directorate of Defense Trade Controls prior to award, with failure to provide evidence of registration rendering offers ineligible. The contract imposes stringent packaging requirements aligned with ASTM D3951 and MIL-STD-129, prioritizing all DLA Master List of Technical and Quality Requirements, including RP001 for packaging and RQ011 for removal of government identification from non-accepted supplies. Delivery is FOB origin within 120 days, with no quantity variance permitted, and inspection and acceptance occur at the destination. The item is covered under CMMC Level 2 Self-Assessment, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List effective as of the solicitation issue date. The unit of issue is each (EA), with the purchase request number 1000239508, and the contract is managed by Amentum Services, Inc. as the vendor, with Theodore Misiolek designated as the primary point of contact.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334519
New
Federal
Manufacturing & Production Readiness Support
W6QK Acc-Apg

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → FA4819 325 Cons Pkp

Same awarding agency

NAICS: 562211
New
Federal
CATM range Cleaning
Solicitation # FA481926Q0054
The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting quotes under solicitation number FA481926Q0054 for CATM range cleaning services in support of the 325th Security Forces Squadron. This acquisition is fully set aside for small businesses under NAICS code 562211 for Hazardous Waste Treatment and Disposal, with the Product Service Code F108 indicating environmental remediation. Vendors must submit comprehensive proposals that include pricing, schedule adherence, and any technical documentation required to demonstrate compliance. All submissions must be sent via email to SSgt Angel Clarke and SrA Samuel Pendleton by the deadline of 28 August 2026 at 4:00 PM CDT; late or incomplete offers will not be evaluated. A mandatory site visit is scheduled for 21 August 2026 at 9:00 AM CST at Tyndall AFB, Florida, and interested parties must register by 12:00 PM CST on 17 August 2026 by providing the names of up to two attendees, company details, point of contact information, phone, and email. Participation in the site visit is voluntary and at the vendor’s own expense, with the Air Force assuming no liability or cost. Questions regarding the solicitation must be submitted no later than 25 August 2026 at 12:00 PM CDT. The contract is issued by the Department of Defense through the 325th Contracting Squadron, and all responses must strictly adhere to the submission requirements outlined in the solicitation, including the stated wage determination and technical specifications.
Hazardous Waste Treatment and Disposal

POSTED

about 22 hours ago

DEADLINE

in 17 days
View Details
NAICS: 334515
New
Federal
Anritsu LMR Master S412E Handheld Analyzer System and Accessories
Solicitation # FA481926Q0079
The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting a single Anritsu LMR Master S412E Handheld Analyzer System along with all required accessories to support the 325th Communications Squadron. This is a brand-name acquisition requiring the specific Anritsu model, which must deliver comprehensive functionality including Land Mobile Radio maintenance, spectrum analysis, cable and antenna testing, GPS-based coverage mapping, distance-to-fault detection, vector voltmeter measurements, and EMF assessments—all through a single portable handheld device. The requirement is strictly for the specified system as outlined in the Salient Characteristics, and vendors must demonstrate full compliance through submitted quotes that include pricing, estimated delivery timelines, and supporting technical documentation. This procurement is conducted as a 100% Small Business Set-Aside under NAICS code 334515 for Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals, with a Product Service Code of 6625. All offers must be submitted via email to SSgt Sean-Austin Maguire and SSgt Rebecca Cudjoe by 1:00 PM CDT on 14 August 2026; late or incomplete submissions will not be considered. Questions regarding the solicitation must be submitted in writing via email no later than 1:00 PM CDT on 11 August 2026, and responses will be posted as amendments to SAM.gov. The contract is administered under solicitation number FA481926Q0079 and performance will occur at Tyndall Air Force Base, Florida.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

about 22 hours ago

DEADLINE

in 7 days
View Details
NAICS: 541330
New
Federal
Technical Support and Calibration ServicesThis contract involves the provision of technical support, setup assistance, and validation services for an analyzer system upon delivery, ensuring that all software functions are fully operational and that factory calibration is properly documented. The services are critical to confirming system readiness and compliance with operational standards before deployment. The contract is categorized as a subcontract under a Small Business Set Aside, specifically designated for small businesses, and falls under the NAICS code 541330 for other scientific and technical consulting services. It is managed by the Department of Defense through the agency FA4819 325 Cons Pkp, with performance required at Tyndall AFB, Florida, and the response deadline for submissions is August 14, 2026.
Engineering Services

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 334515
New
Federal
Supply of System Accessories and Calibration LoadThe contract involves the supply of genuine Anritsu accessories essential for field testing and calibration, including a Field Accessory Kit, Tri-Axis Isotropic Antenna, Directional Antenna Handle, Log-Periodic Antenna, and a Precision N(f) Calibration Load, all specified by exact part numbers. These components are critical for maintaining measurement accuracy and operational readiness in electromagnetic environment testing. The solicitation is structured as a subcontract under a Small Business Set Aside designation, reserved exclusively for small businesses, and is governed under NAICS code 334515, which pertains to navigational, measuring, electromedical, and control instruments manufacturing. The opportunity was posted on August 6, 2026, with a response deadline of August 14, 2026, at 5:00 PM, requiring timely submission from eligible vendors. Performance of the contract is to take place at Tyndall Air Force Base, Florida, with the Department of Defense through the FA4819 325 Cons Pkp office as the contracting entity responsible for oversight.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 334515
New
Federal
Supply of Anritsu LMR Master S412E Handheld Analyzer SystemThe contract entails the supply of one Anritsu LMR Master S412E Handheld Analyzer system equipped with all factory-installed software options, including Vector Voltmeter, Interference Analysis, GPS, Coverage Mapping, EMF Measurement, and P25 Signal Analysis, ensuring full capability for land mobile radio system testing and field diagnostics. The system is intended for use at Tyndall Air Force Base, Florida, with a zip code of 32403, and is being procured under a subcontract classified as a Small Business Set Aside - Total, meaning only qualified small businesses are eligible to respond. The solicitation was posted on August 6, 2026, with a response deadline of August 14, 2026, at 5:00 PM Eastern Time. The North American Industry Classification System code for this procurement is 334515, indicating the focus on navigational, measuring, electromedical, and control instruments manufacturing. The contracting activity is under the Department of Defense, specifically the FA4819 325 Cons Pkp organization, and is subject to federal acquisition regulations applicable to military and defense-related procurements. All deliverables must meet technical specifications for operational deployment in field environments consistent with U.S. Air Force communication and monitoring requirements.
Instrument Manufacturing for Measuring and Testing Electricity and Electrical Signals

POSTED

5 days ago

DEADLINE

in 3 days
View Details
NAICS: 722310
New
Federal
Tyndall Mess Attendant Recompete
Solicitation # FA481926R0001
The contract is for mess attendant support services at the Berg-Liles Dining Facility on Tyndall Air Force Base, Florida, under the full operational and management control of the 325th Fighter Wing Force Support Squadron. The contractor is responsible for daily food service tasks including serving and replenishing meals, cleaning facilities and equipment, preparing vegetables and fruits for self-service bars, assembling cold cuts and cheeses for deli stations, wrapping sandwiches, portioning pastries, and providing cashier services. The contractor must adhere to the Tri-Service Food Code, federal regulations, and specific standards outlined in the Performance Work Statement, but is explicitly prohibited from exercising any operational control over the facility, which remains entirely under Air Force oversight. In contingency situations, the contractor may be required to temporarily provide cooks to maintain dining operations. The scope of work also includes equipment maintenance, repair, and ensuring coverage for ethnic and specialty food stations. The solicitation, identified as FA481926R0001, has undergone multiple amendments to refine requirements, update documentation, and adjust timelines. Initial amendments revised the Performance Work Statement, updated pricing matrices with Government-determined Not-to-Exceed (NTE) values, and clarified workload estimates for weekdays, weekends, and holidays. A prolonged Question and Answer period was opened to accommodate vendor inquiries, culminating in the extension of the proposal deadline to May 1, 2026. However, the process was suspended indefinitely following a protest filed with the Government Accountability Office (GAO) in April 2026, which has now been formally dismissed. As a result, the Government intends to reissue the solicitation with a minimum 30-day reopening period, updated workload data aligned with a revised Period of Performance beginning October 1, 2027, and further administrative corrections. The contract is set aside under the 8(a) program for small disadvantaged businesses and is managed by the Department of Defense through the Tyndall AFB office, with primary point of contact Scott Dubuque.
Food Service Contractors

POSTED

5 days ago

DEADLINE

in about 1 month
View Details
NAICS: 531120
New
Federal
Synopsis - Notice of Intent to Award a Sole Source - Temporary Module Facilities Lease
Solicitation # FA481926C0022
The government intends to award a sole-source contract to Williams Scotsman Inc. for the lease of temporary module facilities at Tyndall Air Force Base, Florida, under NAICS code 531120 for lessors of nonresidential buildings. The contract period will run from September 1, 2026, through August 30, 2030, and is justified under 10 U.S.C. 3204(a)(1) and 41 U.S.C. 3304(a)(1) because Williams Scotsman Inc. is the sole responsible source that currently owns and maintains the facilities in use, and no other alternatives meet the agency’s requirements. Although this is a pre-solicitation notice and not a formal request for competitive proposals, all responsible sources may submit capability statements or quotations prior to the deadline of August 20, 2026, at 3:00 p.m. CDT for consideration. The contract will be managed by the 325th Contracting Squadron, with primary point of contact David Hackney and secondary contact Mercedes Bruce, and the solicitation number is FA481926C0022.
Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

6 days ago

DEADLINE

in 9 days
View Details
NAICS: 238290
New
Federal
Vehicle Wash Rack System Installation — Tyndall Air Force Base
Solicitation # FA481926Q0058
The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting proposals for a firm-fixed-price contract to furnish, install, and commission a complete vehicle wash rack system supporting two interior vehicle wash bays and one exterior bay designed for larger vehicles. The scope includes all labor, materials, equipment, and supervision necessary to deliver a fully operational system integrated with existing utilities, including a high-pressure pump system with variable frequency drive, air compressor, freeze protection, and control systems. The contractor must also execute system startup, testing, commissioning, provide 30 gallons of initial chemicals, and conduct operator training for Government personnel. Work must be completed within 60 calendar days of contract award at Building 36276 on Tyndall AFB, with final inspection and acceptance occurring at that location. The contract is a total small business set-aside under NAICS code 238290, and all proposals must comply with the detailed Statement of Work provided as an attachment. Proposals must include a complete Firm-Fixed-Price quotation for three contract line items (CLINs 0001–0003) and a detailed technical capability submission demonstrating how the offeror will meet the SOW requirements, with blank statements of compliance deemed unacceptable. Evaluation will be based on a trade-off approach equally weighing price and technical capability, with award made to the offeror providing the most advantageous solution. The solicitation mandates compliance with numerous Federal Acquisition Regulation clauses including those related to small business size certification, employment equity, labor standards, cybersecurity protections under NIST SP 800-171, prohibitions on counterfeit parts and foreign telecommunications equipment, and contractor personnel identity verification. All contractors must register in SAM.gov, submit proposals via email to the Contracting Officer by the deadline, and submit names of personnel requiring base access with formal requests. The Contracting Officer’s Representative, SrA Jose Rosado-Figueroa, will handle inspections and acceptance, and all payments must be processed electronically through WAWF using specified DoDAACs. Site visits are scheduled for July 28, 2026, and questions must be submitted by August 3, 2026.
Other Building Equipment Contractors

POSTED

6 days ago

DEADLINE

in 1 day
View Details
NAICS: 336120
New
Federal
Supply of John Deere XUV 845R Premium Cab UTVs with Military ComplianceThe contract solicits the supply and delivery of three John Deere XUV 845R Premium Cab UTVs, each equipped to meet stringent military specifications including MIL-STD-130 for item identification and MIL-STD-129 for packaging and labeling requirements. These vehicles are to be delivered F.O.B. destination to Tyndall Air Force Base in Florida with a zip code of 32403, ensuring full compliance with Department of Defense standards for asset tracking and logistics readiness. The procurement is structured as a subcontract under a Small Business Set Aside, designated as total, meaning only small businesses are eligible to bid, and it falls under the NAICS code 336120 for motor vehicle manufacturing. The opportunity was posted on August 4, 2026, with a hard deadline for responses on August 12, 2026, at 5:00 p.m., and is managed by the FA4819 325 Cons Pkp agency under the Department of Defense.
Heavy Duty Truck Manufacturing

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 336999
New
Federal
John Deere 845R Premium Cab XUVs
Solicitation # FA481926Q0074
The 325th Contracting Squadron at Tyndall Air Force Base, Florida, is soliciting quotes for three John Deere Gator XUV845R Premium Cab Utility XUVs to support logistics operations by the 325th Logistics Readiness Squadron. These vehicles are specifically required for safe and efficient transportation of personnel and heavy flight line equipment, with a mandatory towing capacity of at least 4,000 pounds to handle full fuel bowsers, necessitating a brand name acquisition for the exact model due to strict safety and performance standards. The procurement is structured as a 100% Small Business Set-Aside under NAICS code 336999 and classified under Product Service Code 2310 for Passenger Motor Vehicles. Vendors must submit complete quotes that include pricing, delivery timelines, and supporting technical documentation to confirm compliance with all specifications. Offers are due by 1:00 PM CDT on August 12, 2026, and must be sent via email to SSgt Sean-Austin Maguire and SrA Samuel Pendleton; submissions received after the deadline or lacking required details will be disqualified. The contract is issued under solicitation number FA481926Q0074, with performance to occur at Tyndall AFB, Florida.
All Other Transportation Equipment Manufacturing

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 541990
New
Federal
AFCEC Operation Support Services
Solicitation # FA481926R0019
The Air Force Civil Engineer Center at Tyndall Air Force Base, Florida, is seeking qualified small businesses certified under the 8(a) program to provide comprehensive operation support services under a firm fixed-price contract. This acquisition, designated as a total small business 8(a) set-aside, is governed by the Revolutionary FAR Overhaul Part 5 and follows RFO Part 12 for the acquisition of commercial services, with the NAICS code 541990 and a size standard of $19.5 million in annual revenue. The contractor will support baseline operational functions across AFCEC facilities including Building 1117, the 9700 area, the Silver Flag fire research area, and other test ranges, performing tasks such as facility maintenance, producing prototypes and test articles, and assisting the Air Force Pavement Evaluation Team and other RDTE initiatives. All work must adhere to applicable federal laws, Air Force standards, and commercial practices, with performance strictly tied to the detailed Performance Work Statement. The contract includes a base period of twelve months and four optional one-year extension periods, making the total potential duration five years. Proposals must be submitted via the Governmentwide Point of Entry at sam.gov by the deadline of September 8, 2026, and no paper copies will be distributed. Interested parties are responsible for monitoring sam.gov for the official solicitation release, which will be posted under solicitation number FA481926R0019 and made available on August 4, 2026. The government will not conduct a site visit prior to the proposal deadline. Evaluation will use Best Value Trade-Off procedures to select the offeror providing the highest overall value to the government. Only entities currently registered in the System for Award Management (SAM) are eligible to respond. Questions must be submitted in writing by August 14, 2026, to the designated point of contact, Cleville Yarbrough, or Scott Dubuque. The place of performance is Tyndall AFB, Florida, with all services required to be delivered on-site to support AFCEC missions and its affiliated organizations.
All Other Professional, Scientific, and Technical Services

POSTED

7 days ago

DEADLINE

in 28 days
View Details
NAICS: 561621
New
Federal
Physical Security System Maintenance
Solicitation # FA481926Q0045
The U.S. Air Force’s 325th Contracting Squadron at Tyndall Air Force Base is soliciting maintenance, service, and support for the OnGuard Lenel Access Control System located at Eglin Air Force Base, Florida, serving the 53rd Wing and 692nd Cyber Operations Squadron. This procurement, identified as FA481926Q0045, is a Total Small Business Set-Aside under NAICS Code 561621 and is structured as a Request for Quote with a firm fixed-price contract spanning a base year and five option years, totaling up to six and a half years of performance through February 2032. The scope requires the contractor to ensure full operational capability of the Lenel ACS, including quarterly preventative maintenance, replacement of compatible hardware and software components, and a comprehensive software upgrade and support plan with annual updates, firmware patches, and hot fixes as issued by Lenel. The contractor must be a Value Authorized Reseller of Lenel products and must comply with stringent site access, security, and personnel requirements, including proper identification badges, English language proficiency, and adherence to Air Force installation access protocols as outlined in AFFARS 5352.242-9000. All services must be performed at the designated location in Building 351 at Eglin AFB, with payment processed exclusively through the Wide Area WorkFlow system using specified DoDAAC codes. The solicitation requires offerors to submit detailed technical proposals demonstrating minimum salient characteristics and compliance with the Statement of Work, with technical acceptability serving as a pass/fail gate for award consideration. Evaluation will be based on best value combining technical capability and total evaluated price, with no discussions anticipated unless deemed necessary by the government. Offers must remain firm for 60 days after the submission deadline, extended through successive amendments to July 31, 2026. Mandatory FAR clauses include prohibitions on contracting with entities requiring internal confidentiality agreements, System for Award Management registration and maintenance with deviation 2026-O0038, security prohibitions and exclusions, prohibitions on inverted domestic corporations and covered defense telecommunications, and requirements for whistleblower rights and safeguarding covered defense information. Additionally, the contract incorporates a clause permitting optional service extensions by the government without renegotiation. Offerors must maintain active SAM registration, submit required representations regarding former DoD officials and business operations, and ensure all personnel meet appearance and badge requirements. The contractor assumes
Security Systems Services (except Locksmiths)

POSTED

7 days ago

DEADLINE

in 1 day
View Details