Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Dynapower, Power Supply for Watervliet Arsenal, Watervliet, NY

Awarded
W911PT26PA092Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

One high-power switchmode power supply is specified with a 480-volt three-phase AC input, delivering 15 volts at 3000 amps DC through direct water cooling, ensuring minimal ripple of less than 2% across the full operating range from 10 to 100 percent load. It features an integral Touchpad controller from Dynapower and digital Ethernet interfaces for voltage and current reference and feedback, housed in a NEMA 4X-rated enclosure for robust environmental protection. Two additional units are provided with 120-volt single-phase input, each producing 12 volts at 50 amps and utilizing forced air cooling, equipped with standard integral controls including an on/off switch, digital LCD readouts for voltage and current, and push-button adjustments, using 4-20mA analog signal isolators for system interfacing and housed in NEMA 1 enclosures. Three more units of the same specification as the 50-amp model are included but rated for 100 amps output, sharing the same input, cooling, control, interface, and enclosure standards, ensuring system consistency and scalability across multiple operational needs at the Watervliet Arsenal facility in New York.

General Info

One 15V/3000A water-cooled power supply and five 12V units (50A and 100A) for Watervliet Arsenal under DoD contract.

Agency

Department Of Defense → W6QK Acc Wva

Contract Value

$86,130

NAICS

335314 - Relay and Industrial Control Manufacturing

Place of Performance

Watervliet, NY, 12189, USA

Set-Aside

NONE

Awardee

DYNAPOWER COMPANY LLC

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Wva
Contacts1 person available
OfficeWATERVLIET, NY, 12189-4050, USA
Organization / AgencyDepartment Of Defense → W6QK Acc Wva
Office AddressWATERVLIET, NY, 12189-4050, USA
Contacts
Stephanie Webster
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

1 EACH - SWITCHMODE POWER SUPPLY (PSPLY-SMPS-HP-030)
• Cooling: Direct Water
• AC Input: 480 Volts, 3 Phase, 60Hz
• DC Output: 15 Volts, 3000 Amperes
• Ripple: Filtered. The proposed rectifier will maintain imposed AC RMS ripple to less than
2% of full scale voltage output through the rectifier’s entire operating range (10-100% output)
• Controls: Integral console with Dynapower’s exclusive Touchpad controller (see Technical
Description for full functionality)
• Interface: Connections for reference and feedback of voltage and current via digital signals
over Ethernet
• Enclosure Rating: NEMA 4X



2 EACH – SWITCHMODE POWER SUPPLY (PSPLY-SMPS-R-011)
• Cooling: Forced Air
• AC Input: 120 Volts +/-5%, 1 Phase, 60Hz+/-2%
• DC Output: 12 Volts, 50 Amps
• Ripple: Filtered. The proposed rectifier will maintain imposed AC RMS ripple to less than
2% of full scale voltage output through the rectifier’s entire operating range (10-100% output)
• Controls: Standard integral controls on/off switch, digital LCD DC voltage and ammeter, and
up/down current and voltage control push buttons.
• Interface: Signal Isolators for reference and feedback of voltage and current via 4-20mA
analog signals
• Enclosure Rating: NEMA 1



3 EACH – SWITCHMODE POWER SUPPLY (PSPLY-SMPS-R-013)
• Cooling: Forced Air
• AC Input: 120 Volts +/-5%, 1 Phase, 60Hz+/-2%
• DC Output: 12 Volts, 100 Amps
• Ripple: Filtered. The proposed rectifier will maintain imposed AC RMS ripple to less than
2% of full scale voltage output through the rectifier’s entire operating range (10-100% output)
• Controls: Standard integral controls on/off switch, digital LCD DC voltage and ammeter, and
up/down current and voltage control push buttons
• Interface: Signal Isolators for reference and feedback of voltage and current via 4-20mA
analog signals
• Enclosure Rating: NEMA 1

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
DIBBS
Supply of Electronic Command Signal Switching UnitsThis subcontract involves the supply of Electronic Command Signal Switching Units for prime contractors supporting DLA Weapons Support contracts. The selected provider must manufacture or source part number 5895-01-469-5493 as an original equipment manufacturer or authorized distributor, ensuring all units strictly adhere to exact product definitions. Compliance with DPAS rated order requirements under 15 CFR 700 is mandatory, and the provider must provide CAGE code and part number verification to ensure authenticity and quality. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, the contract falls under NAICS code 335314. The provider is responsible for delivering the physical switching units in accordance with a specified delivery schedule. The response deadline for this opportunity is November 12, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335314
New
DIBBS
Supply of Electromagnetic Relays (NSN 5945-01-31-09308)
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M0-27-T-0865
Solicitation SPE7M0-27-T-0865 is a federal procurement issued by the Defense Logistics Agency (DLA) for the acquisition of four electromagnetic relays, identified by NSN 5945013109308. The requirement specifies compatible part numbers K20P-5D15-24 from Green Light Electronics, Inc. and 021-002132-001 from Northrop Grumman Systems Corporation. The items are to be delivered FOB Destination to the USS Theodore Roosevelt (CVN 71) with an original required delivery date of November 2, 2026, and a delivery lead time of five days after award. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements via the DLA Master List, with packaging governed by MIL-STD-2073-1E and RP001, and marking conducted per MIL-STD-129. Specific labeling for component lead finish must comply with IPC/JEDEC J-STD-609. Administrative requirements include electronic invoicing through the Wide Area WorkFlow (WAWF) system and compliance with various FAR and DFARS clauses, including the Buy American Act, safeguarding of covered defense information, and prohibitions on certain telecommunications equipment. All quotes must be submitted through the DLA Internet Bid Board System (DIBBS).
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M1-27-U-0980
Solicitation SPE7M1-27-U-0980 is a unilateral simplified indefinite-delivery contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of electromagnetic relays, identified by NSN 5945-01-473-0653. The requirement consists of an estimated quantity of 358 units with a delivery window of 107 days, shipped FOB Origin. This procurement is a total small business set-aside and prohibits the use of additive manufacturing for the produced items. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to several technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, individual unit packs must be labeled according to IPC/JEDEC J-STD-609 to identify lead and lead-free attributes. Environmental and safety compliance is required, specifically prohibiting the intentional addition of mercury and requiring compliance with the Hazard Communication Standard for any hazardous materials. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to DFARS cybersecurity and reporting standards.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ROTARY
Solicitation # SPE7M1-27-U-0986
Solicitation SPE7M1-27-U-0986 is issued by the DLA Weapons Support Maritime Supply Chain for the procurement of rotary relays, specifically TE Connectivity Corporation part number MDR67-3 (NSN 5945-01-123-3236). This critical application item is classified as a commercial off-the-shelf product. The requirement is for an estimated quantity of 23 units, with a delivery timeline of 386 days after receipt of order. Shipping is established as FOB Origin, and both inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Additionally, the contractor must apply lead finish markings per IPC/JEDEC J-STD-609. Environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American Act and cybersecurity reporting standards under DFARS 252.204-7012. While the solicitation is not a small business set-aside, it may be subject to an automated award via DIBBS based on price and technical acceptability.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335314
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M1-27-U-0990
Solicitation SPE7M1-27-U-0990 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 1,518 estimated units of solid state relays, identified by NSN 5945015366091. This is a restricted source and critical application item requiring engineering source approval from the Government Design Control Activity. Approved sources include Riverside Manufacturing LLC (P/N 14375) and AM General LLC (P/N 6013654). The requirement is set aside for Service-Disabled Veteran-Owned Small Businesses (SDVOSB) under NAICS code 335314. The contract specifies a delivery window of 154 days with shipping terms as FOB Origin and inspection and acceptance occurring at the destination. Strict adherence to quality and packaging standards is required, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and IPC/JEDEC J-STD-609 for component lead finish identification. Administrative requirements include electronic invoicing via the Wide Area Workflow (WAWF) system and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing, and the prohibition of covered telecommunications equipment. Price evaluation will be based on the quoted price for the estimated annual demand.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335314
New
DIBBS
MOTOR, CONTROL
Solicitation # SPE7M5-27-T-1717
Solicitation SPE7M5-27-T-1717 is a request for quotations issued by the Defense Logistics Agency Weapons Support Active Devices Division for the procurement of 55 units of control motors, identified by NSN 6105007872744. This is a fixed-price acquisition with a delivery requirement of 84 days after order, utilizing FOB Origin terms under the First Destination Transportation program. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California. The procurement is not a small business set-aside, though it is designated for Service-Disabled Veteran-Owned Small Businesses. The contract mandates strict adherence to DLA packaging requirements under RP001 and marking standards per MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Technical specifications are tied to basic drawing 18876 9072880 Revision F. Key regulatory compliance includes the Buy American Act, Berry Amendment, and specific prohibitions against the intentional addition of mercury and the use of covered defense telecommunications equipment. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with DFARS cybersecurity reporting standards.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
Solenoid Assembly SupplierThis subcontract involves the supply of solenoid assembly units to prime contractors for delivery to the Defense Logistics Agency Weapons Support Active Devices Division. The hardware must strictly adhere to NSN 5945-13-116-2037 and specific FN Herstal part numbers 05415230001829, 05415230003977, and 3522800040. The scope of work requires the delivery of two packaged and marked solenoid assemblies, with performance taking place in New Cumberland. Compliance is mandatory regarding packaging and marking standards MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the supplier must follow the Hazard Communication Standard 29 CFR 1910.1200 for the handling of hazardous materials. This opportunity falls under NAICS code 335314 and has a response deadline of November 9, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
Electrical Solenoid Supplier (NSN 5945-01-621-4234)This subcontract involves the supply of two electrical solenoids, specifically part number 05270800 from Hatz Diesel of America Inc, under NSN 5945-01-621-4234. The items are intended for prime contractors delivering to the DLA Weapons Support Active Devices Division of the Department of Defense. The supplier must provide associated Safety Data Sheets and ensure all components adhere to IPC/JEDEC J-STD-609 lead finish markings. The contract mandates strict adherence to the Buy American Act and the Berry Amendment. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Performance for this requirement is centered in Tracy, California, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
Relay Assembly Fabrication (NSN 5945-01-221-8623)This small business set-aside subcontract involves the fabrication of three high-reliability relay assemblies for the Department of Defense under the DLA Weapons Support Active Devices Division. The manufacturer is required to produce the assemblies according to specific technical drawings 81755 16E3149, 81755 H16DW1209-203, and 81755 16AEI-42-4034, ensuring that all PCB markings adhere to IPC/JEDEC J-STD-609 standards. Strict regulatory and quality standards apply to this project, including mandatory CMMC Level 2 certification and full ITAR/EAR compliance. Additionally, all deliverables must be packaged in accordance with MIL-STD-2073-1E and MIL-STD-129. The performance of this contract is centered in New Cumberland, Pennsylvania, with a response deadline set for November 9, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
Manufacturer of Electromagnetic Relays (NSN 5945-00-919-7749)This subcontract involves the manufacture and supply of five electromagnetic relays, identified by NSN 5945-00-919-7749, for prime contractors delivering to the DLA Weapons Support Active Devices Division. All units must be produced in strict accordance with Basic Drawing NR 30554 70-1136, Revision AA, under NAICS code 335314. The contract mandates rigorous regulatory compliance, including adherence to the Buy American Act, the Berry Amendment, and DFARS 252.225-7001. Additionally, the provider must maintain US/Canada Joint Certification Program certification, complete DLA export-control training, and meet CMMC Level 2 cybersecurity standards. Responses are due by November 9, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 335314
New
DIBBS
Supplier of Electromagnetic Relays (MS24184-D1)This subcontract, managed by the Department of Defense Active Devices Division, requires the supply of 10 electromagnetic relays to be delivered to a government destination in New Cumberland. The hardware must strictly adhere to Basic Specification MS24184T, Revision T, and correspond to Part Piece Number MS24184-D1 and NSN 5945005478738. Due to the nature of the components, the supplier must meet rigorous quality assurance standards for Critical Application items. The opportunity was posted on October 28, 2026, with a response deadline of November 2, 2026, falling under NAICS code 335314.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → W6QK Acc Wva

Same awarding agency

NAICS: 238210
New
Federal
Electrical InstallationThis small business set-aside subcontract involves providing specialized electrical wiring and installation services for a new tank system and structure at the US Army Watervliet Arsenal facility. The scope of work includes the installation of electrical conduits, wiring, and panels, all of which must be performed in strict accordance with NFPA 70 National Electric Code standards to ensure a certified installation. Operating under the Department of Defense, the contractor is responsible for coordinating with the WVA Fire Department to obtain necessary Hot Work permits for any welding or burning activities. The project is categorized under NAICS code 238210 and requires the delivery of a fully compliant and certified electrical system for the prime contractor.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 562111
New
Federal
Hazardous Waste and C&D Debris DisposalThis subcontract opportunity is for the provision of hazardous waste and construction and demolition debris disposal services at the US Army Watervliet Arsenal facility. The selected contractor will be responsible for transporting and disposing of water and oil pumped from underground storage tanks, as well as hauling recycled materials and debris using vacuum trucks and dumpsters. To ensure compliance and tracking, the contractor must provide bills of lading, weight slips, and disposal certificates for all materials handled. Managed by the Department of Defense under the agency W6QK Acc Wva, this project is designated as a total small business set-aside under NAICS code 562111. The response deadline for this opportunity is November 12, 2026, with performance taking place in zip code 12189.
Solid Waste Collection

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 236220
New
Federal
Above-Ground Tank Installation and Structure ConstructionThis subcontract opportunity involves the construction of a new housing structure and the installation of an above-ground replacement tank and spill pad at the US Army Watervliet Arsenal facility. All work must be performed in strict accordance with UFGS 33 61 13.19 and NFPA 70 standards. The selected contractor is responsible for providing comprehensive before and after photographic documentation of the construction process and delivering the fully completed structure and tank system. Managed by the Department of Defense under agency W6QK Acc Wva, this project is designated as a total Small Business Set Aside under NAICS code 236220. The performance location is within zip code 12189. Interested parties must submit their responses by the deadline of November 12, 2026, at 3:00 PM.
Commercial and Institutional Building Construction

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 562910
New
Federal
UST Removal and Environmental RemediationThis subcontract for UST Removal and Environmental Remediation involves the removal of underground storage tanks at the US Army Watervliet Arsenal facility. The selected contractor will be responsible for pumping out water and oil, executing tank extraction, and performing comprehensive post-removal site cleaning and inspection using specialized pumping and excavation equipment. Key deliverables include the removed tanks, a detailed site inspection report, and all necessary disposal documentation. The project requires strict adherence to safety and regulatory protocols, including the development of a UST Work Plan and the procurement of Confined Space entry permits. This opportunity is designated as a Total Small Business Set Aside under NAICS code 562910. Interested parties must submit their responses by November 12, 2026, for this Department of Defense project located in zip code 12189.
Remediation Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 562910
New
Federal
Watervliet Arsenal (WVA) Building 152 (B152) Underground Storage Tank (UST) Removal and Replacement
Solicitation # W911PT27QA002
Solicitation W911PT27QA002 is a total small business set-aside for the removal of an underground storage tank and its replacement with an above-ground tank at Building 152 of the Watervliet Arsenal in New York. The contractor is responsible for providing all construction management, labor, materials, and equipment, including pumping and disposing of tank contents, executing a detailed work plan, and providing a final site inspection and cleaning report with before-and-after documentation. The project must be completed within 90 calendar days from the receipt of the Notice to Proceed, with a performance window scheduled between December 1, 2026, and March 31, 2027. The contract is subject to the Davis-Bacon Act and Buy American-Construction Materials requirements, and it mandates strict adherence to NFPA 70 and UFGS 33 61 13.19 standards. All products must be free of hazardous materials such as asbestos and PCBs, and waste dumpsters must be managed with specific clearance and covering requirements. Award will be based on the lowest evaluated offer or best value, provided the offeror meets all responsibility criteria under FAR 9.104. Proposals must be submitted electronically via the PIEE Solicitation module by November 12, 2026.
Remediation Services

POSTED

1 day ago

DEADLINE

in 14 days
View Details
NAICS: 332813
New
Federal
Heat Treatment of Cannon HardwareThis small business set-aside subcontract, issued by the Department of Defense for the Watervliet Arsenal, involves the specialized heat treatment of cannon hardware. The selected contractor will be responsible for delivering heat-treated U-Bolts along with certified heat treatment reports. All work must be performed using industrial heat treatment furnaces featuring precise atmosphere control and must adhere strictly to QAP-APPX-WVA paragraph 9.1 and ASTM-E1444 paragraphs 5.3 through 5.3.1.15. A critical requirement for this project is obtaining WVA Level 3 approval for all written procedures. The opportunity is categorized under NAICS code 332813 and is designated as a total small business set-aside. Interested parties must submit their responses by November 10, 2026, for performance in the 12189 zip code area.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 331110
New
Federal
Supply of AISI Grade Wrought Steel for Cannon HardwareThis subcontract, issued by the Department of Defense for the Watervliet Arsenal, requires the supply of AISI grade wrought steel bars or stock for cannon hardware. The material must strictly conform to MIL-C-13931 paragraph 6.5 and cannot be merchant quality, leaded, resulfurized, or rephosphorized. Castings are explicitly prohibited, and the supplier must provide material certifications verifying the chemical composition of the delivered stock. The opportunity is designated as a total set-aside for small businesses under NAICS code 331110. Compliance with the Buy American and Balance of Payments Program is mandatory. Interested parties must submit their responses by November 10, 2026, for performance at the specified location in zip code 12189.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
Federal
Precision Machining and Fabrication of U-Bolts (105mm HOW M20 Cannon)This small business set-aside subcontract with the Department of Defense involves the precision machining and fabrication of 248 U-Bolts for 105mm HOW M20 Cannons supporting Watervliet Arsenal projects. The contractor is required to utilize CNC machining equipment to meet strict drawing tolerances specified in Drawing 12591508, Revision Product Baseline, and must ensure all units feature unique item identification marking in accordance with MIL-STD-130. Deliverables for this contract include the finished U-Bolts along with DD Form 1423, a Certificate of Conformance, and comprehensive chemical and mechanical test results. The project falls under NAICS code 332710 and is managed by the W6QK Acc Wva agency.
Machine Shops

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 332710
New
Federal
U Bolt For Watervliet Arsenal
Solicitation # W911PT27QA021
Solicitation W911PT27QA021 is a total small business set-aside for the procurement of 248 U-Bolts for the 105mm HOW M20 Cannon, divided into two line items of 22 and 226 units. The hardware must be manufactured according to Drawing 12591508, Revision Product Baseline, and must utilize standard AISI grade wrought steels, specifically prohibiting merchant quality, leaded, resulfurized, or rephosphorized steels and castings. Deliverables include the hardware and contract data as specified in the Contract Data Requirements List (DD Form 1423) and general data drawings. The contract is a fixed-price award with a delivery schedule of 150 calendar days from the date of award, shipped FOB Destination to Watervliet Arsenal in New York. Award will be granted to a single offeror providing the lowest evaluated price who meets all material, technical, and responsibility criteria under FAR 9.104. Proposals must be submitted for the total quantity of all items via the PIEE Solicitation Module to be considered responsive. Strict quality and marking requirements are in place, including the need for a Certificate of Conformance, chemical and mechanical test results, and unique item identification marking per MIL-STD-130. Invoicing and receiving reports must be processed electronically through Wide Area WorkFlow. The procurement is subject to various federal regulations, including the Buy American and Balance of Payments Program and safeguarding of covered defense information.
Machine Shops

POSTED

2 days ago

DEADLINE

in 12 days
View Details
NAICS: 484220
Federal
Defense Freight Transportation (FOB Destination)This subcontract for Defense Freight Transportation involves the transportation and delivery of 61 finished artillery components to the Watervliet Arsenal in New York. The contractor is responsible for hauling these units to DoDAAC W16H1F, ensuring that all shipments are strictly labeled according to MIL-STD-129 standards. Key administrative requirements include the management of all delivery documentation, specifically the Bill of Lading and NSN 1015013444114. The project falls under NAICS code 484220 and is managed by the Department of Defense agency W6QK Acc Wva, with a response deadline set for November 2, 2026.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 331110
Federal
AISI Grade Wrought Steel SupplyThis subcontract involves the supply of certified wrought steel bars or billets to prime contractors supporting Department of Defense projects at the Watervliet Arsenal. The scope requires the provision of AISI grade wrought steels, specifically excluding merchant quality, leaded, resulfurized, or rephosphorized materials. To ensure quality and regulatory adherence, the supplier must provide Mill Test Reports verifying both AISI grade and UNS compliance for all delivered materials. Managed under NAICS code 331110 and associated with agency W6QK Acc Wva, the contract focuses on the delivery of certified materials to the prime manufacturer. The opportunity was posted on October 22, 2026, with a response deadline of November 2, 2026. Performance of the contract is centered in the 12189 zip code area.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

7 days ago

DEADLINE

in 4 days
View Details
NAICS: 332710
Federal
Extractor Cartridge ManufacturingThis subcontract involves the manufacture of 61 Right Artillery Extractor Cartridges for prime contractors supporting Department of Defense projects at the Watervliet Arsenal. The production requires precision machining using CNC centers and AISI grade wrought steels in strict accordance with Drawing 12591498. To ensure quality and compliance, the manufacturer must adhere to MIL-C-13931 and implement IUID per MIL-STD-130, while specifically avoiding the use of castings and leaded steels. The final delivery of 61 finished cartridges is required FOB Destination to Watervliet, New York. This project falls under NAICS code 332710 and is managed through the W6QK Acc Wva agency. Interested parties should note the response deadline of November 2, 2026.
Machine Shops

POSTED

7 days ago

DEADLINE

in 4 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 335314
Awarded
DIBBS
59--RELAY,ELECTROMAGNET
Solicitation # SPE7M5-26-T-214W
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
59--RELAY,HYBRID
Solicitation # SPE7M1-26-T-9390
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Closed
Federal
Relay and Control Assembly Manufacturing
W6QK Acc-Rsa

POSTED

4 months ago

CLOSED

3 months ago
View Details
NAICS: 335314
DIBBS
Small Business Subcontracting Participation (Socioeconomic)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
DIBBS
Electromechanical Relay Supply (COTS)
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M1-26-U-2773
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE4A626PV781
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, THERMAL
Solicitation # SPE7M125PB344
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
SWITCH, PUSH
Solicitation # SPE7M8-26-T-3698
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Closed
DIBBS
DC POWER MODULE, AIR
Solicitation # SPE4A5-26-T-259M
Defense Logistics Agency

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 335314
Awarded
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M8-26-T-3553
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE4A5-26-T-151S
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS