Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

ELBOW, PIPE

Open
SPE7M3-27-T-1008Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the DLA Weapons Support Fluid Handling Division, is a small business set-aside request for quotations for 725 units of 1-1/2 inch nominal size PVC pipe elbows. The required components must be 45-degree flow angle, schedule 40, socket type at both ends, and manufactured from ASTM D1784 and ASTM D2466 materials. The contract specifies a delivery period of 168 days, with an original required delivery date of February 4, 2027, and a need ship date of May 4, 2027. Delivery is FOB Origin under the First Destination Transportation program, with the final destination being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA procurement requirements. The contract incorporates several critical federal regulations, including the Buy American Act, NIST SP 800-171 cybersecurity standards, and a strict prohibition on the use of Class I ozone-depleting chemicals. Administrative processing, including invoicing and receiving reports, must be managed through the Wide Area WorkFlow system.

General Info

Small business set-aside for 725 PVC pipe elbows for DLA Weapons Support.

Agency

Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

NAICS

332996 - Fabricated Pipe and Pipe Fitting Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

1
PDF, High priority: read this first18 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION
Office AddressUSA
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELBOW,PIPE
ELBOW,PIPE. PLASTIC PVC 12454-B, ASTM D1784 MATERIAL, 45 DEGREE FLOW
ANGLE, SCHEDULE 40<(>,<)> 1-1/2 INCH NOMINAL PIPE SIZE (SOCKET TYPE BOTH
ENDS, ANSI STANDARD TITLED "FITTINGS, PLASTIC
PIPE, POLY(VINYL CHLORIDE)(PVC), SCHEDULE 40".
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
FULL AND OPEN COMPETITION APPLY
TDP Rev A Gen 2 IAW BASIC NON GOVT STD ASTM D2466 REVISION NR DTD 07/01/2024 PART PIECE NUMBER: 45 ELBOW NPS 1 1/2 PVCI
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7M3-27-T-1008
SECTION B
PR: 7019014515 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7019014515 0001 EA 725.000
NSN/MATERIAL:4730005015073
DELIVERY (IN DAYS):0168
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:05/04/2027 Original Required Delivery Date:02/04/2027
SPE7M3-27-T-1008 NSN/Part Number: 4730-00-501-5073 Quantity: 725 EA Purchase Request: 7019014515QTY: 725 Delivery: 168 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332996
New
SLED
IWQ 138769 Purchase of Ductile Iron Pipe Bends
Solicitation # 138769
The Gwinnett County Government is soliciting bids for the purchase of ductile iron pipe bends under solicitation number 138769. This procurement is managed by the Gwinnett County Department of Financial Services and is performed in Georgia. The solicitation was posted on November 5, 2026, with a response deadline of November 9, 2026. The County reserves the right to award the contract to a single vendor, multiple vendors, or only a portion of the agreement based on its best interest, with ties in proposal scores being resolved by selecting the lowest cost. To be deemed responsive, bidders must submit a variety of critical documents, including the County Fee Schedule, compliance and specification sheets, and all applicable addenda. Depending on the contract value and specific requirements, a bid bond, a contractor affidavit and agreement, and an ethics affidavit for solicitations exceeding $100,000 are required. Additionally, bidders must provide at least three references for work of a similar size and scope. Accepted bidders are required to submit a bid deposit of at least $5,000 as earnest money, which is refunded once the contract is awarded. Payment is contingent upon the County's written final acceptance and delivery of the items.
Gwinnett County Government

POSTED

about 13 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332996
New
DIBBS
Fabrication of Metallic Pipe Assemblies (NSN 4710-01-152-5544)This subcontract involves the fabrication of metallic pipe assemblies for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires cutting, bending, and forming metallic piping to meet the specifications of NSN 4710-01-152-5544 and Oshkosh Defense part number 2228520W. All production must strictly adhere to the DLA Master List of Technical and Quality Requirements (RA001), and the use of additive manufacturing is explicitly prohibited. The contractor is responsible for delivering 12 completed and packaged assemblies in accordance with MIL-STD-129. Performance for this project will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this requirement categorized under NAICS code 332996.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Supply of Fluid Flow Restrictors (NSN 4730007833781)This subcontract involves the supply of five specialized fluid flow restrictors, part number 128A2007, conforming to NSN 4730007833781 specifications for the DLA Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing the units, ensuring they meet Critical Application Item quality control standards, and executing palletization in accordance with RP001 DLA Packaging Requirements. The contract requires strict compliance with the Buy American Act under DFARS 252.225-7001. Performance will take place in Jacksonville, Florida, under NAICS code 332996. The response deadline for this requirement is November 16, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Nut Assembly, Tube Coupling (Half Connector) SupplierThis subcontract involves the supply of 30 nut assemblies for tube coupling half connectors to support prime contractors under the Defense Logistics Agency Weapons Support Fluid Handling Division. The supplier is responsible for manufacturing or sourcing hardware that strictly adheres to NSN 4730004385304, utilizing precision machining and metal fabrication techniques. Logistics for the order are managed through the First Destination Transportation program, with the place of performance located at Robins Air Force Base. The procurement falls under NAICS code 332996 and is managed by the Department of Defense.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Precision Metallic Tube FabricationThe Precision Metallic Tube Fabrication subcontract involves the bending, machining, and finishing of 75 seamless steel tubes for the DLA Weapons Support Fluid Handling Division. The scope of work requires CNC tube bending of 2.000 inch diameter tubing, precision machining of specific bead dimensions, the integration of a 0.785 inch OD tube surge tank inlet, and the installation of a boss drain cock. Performance will take place in New Cumberland. To be eligible, contractors must maintain CMMC Level 2 and ISO 9001:2015 certifications and be registered with ITAR and EAR. This opportunity is categorized under NAICS code 332996, with a response deadline set for November 16, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
CRES Tube Assembly FabricationThis subcontract involves the fabrication of 20 CRES tube assemblies under NSN 4710-01-200-6145 for the DLA Weapons Support Fluid Handling Division in support of M-1 Tank projects. The scope of work includes forming tubing and welding attached flanges and bellows in strict accordance with Basic Drawing NR 19207 12324175 Revision A. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must maintain CMMC Level 2 certification and adhere to Critical Application Item quality standards. The project falls under NAICS code 332996, with a response deadline set for November 16, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Supply of Titanium Alloy Concentric Tube ReducersThis subcontract, issued by the DLA Weapons Support Fluid Handling Division under the Department of Defense, requires the procurement of 168 concentric-type tube reducers. The contractor is responsible for manufacturing or sourcing part number MR54035T12 using titanium alloy in strict accordance with Parker-Hannifin 50599 specifications. Due to the nature of the components, the project must adhere to Critical Application Item quality standards and DLA Packaging Requirements RP001. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332996, with the place of performance located in Tracy, California. All deliverables must be packaged according to RP001 standards and delivered to support prime contractors on DLA supply contracts.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Aluminum Adapter Assembly SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the supply of 28 aluminum adapter assemblies for government procurement projects. These straight tube-to-hose adapters are designed for a 0.625 inch nominal tube OD and a 0.500 inch nominal hose ID and feature a swivel nut. The components are designated as critical application items and must strictly adhere to the technical specifications for NSN 4730-00-842-1138. Performance for this contract is centered at Robins Air Force Base, with a response deadline set for November 16, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Manufacturing of Reducer, Boss (NSN 4730-01-542-9033)This subcontract involves the manufacture and supply of 51 Reducer, Boss (Tube) components for the DLA Weapons Support Fluid Handling Division under the Department of Defense. The contractor is responsible for fabricating these parts to NSN 4730-01-542-9033 specifications using precision machining and metal fabrication equipment. All units must be delivered properly marked and heat-sealed in barrier bags to ensure quality and protection. Compliance is mandatory regarding MIL-STD-129 marking and FAR 52.204-24/DFARS 252.204-7016 standards. The project falls under NAICS code 332996, with the place of performance located in Tracy, California. The response deadline for this requirement is November 16, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Pipe Plug Manufacturing and SupplyThis subcontract involves the manufacturing and supply of two specialized pipe plugs for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The supplier is responsible for ensuring that all units meet the material requirements of NSN 4730011161391 and adhere strictly to RP001 DLA Packaging Requirements. Additionally, the provider must supply Safety Data Sheets that comply with Federal Standard No. 313 and 29 CFR 1910.1200(g). The project falls under NAICS code 332996 and will be performed in Jacksonville, Florida. Interested parties must respond by November 16, 2026, following the posting date of November 5, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Titanium Tube Elbow FabricationThis subcontract, issued by the DLA Weapons Support Fluid Handling Division of the Department of Defense, requires the manufacture and supply of 157 titanium tube elbows. The contractor is responsible for fabricating 1-inch nominal tube elbows in strict accordance with specific technical data, engineering drawings, and DO-C9 ratings. Production must utilize precision tube bending and welding equipment, and the use of additive manufacturing processes is strictly prohibited unless explicit authorization is granted. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332996, with performance taking place at Robins Air Force Base. Interested parties must submit their responses by November 16, 2026, to support prime contractors delivering these essential components for DLA supply contracts.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
Precision Fabrication of Pipe-to-Boss ElbowsThis subcontract involves the precision fabrication of two 1-inch IPS pipe-to-tube elbows for the DLA Weapons Support Fluid Handling Division. The project requires the machining and assembly of components using CRES and Monel materials, strictly adhering to Drawing NR 96169 2621-021-02, TDP Rev A Gen 1, and quality assurance protocols QAP 14153 and QAP-EQ001. Performance will take place in New Cumberland, Pennsylvania. Eligible contractors must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026. The final deliverable consists of two completed and inspected assemblies.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

Same awarding agency

NAICS: 332813
New
DIBBS
Aerospace Surface Treatment and CoatingThis subcontract for Aerospace Surface Treatment and Coating involves providing specialized surface treatments and coatings for Pump Cover P/N DS-922542. Working under the DLA Weapons Support Fluid Handling Division of the Department of Defense, the contractor is responsible for applying protective coatings, plating, or finishes that adhere to the DLA Master List of Technical and Quality Requirements. The work requires the use of industrial plating or anodizing equipment to ensure all components meet strict corrosion and wear specifications before final delivery. The project is categorized under NAICS code 332813 and will be performed at Hill AFB. Interested parties should note the response deadline of November 16, 2026, following the posting date of November 5, 2026.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 331210
New
DIBBS
Supply of Certified Aerospace Raw MaterialsThis subcontract involves the supply of certified aerospace raw materials, including raw billets, castings, or forgings, to prime contractors supporting the DLA Weapons Support Fluid Handling Division. The materials are specifically required for the manufacture of Pump Cover P/N DS-922542 and must strictly adhere to established aerospace specifications. The selected provider is responsible for delivering essential documentation with the materials, including Material Test Reports, Certificates of Conformance, and Safety Data Sheets in compliance with 29 CFR 1910.1200(g). Performance for this contract is centered at Hill AFB, with a response deadline set for November 16, 2026.
Iron and Steel Pipe and Tube Manufacturing from Purchased Steel

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336413
New
DIBBS
Precision Machining and Assembly of Pump CoversThis subcontract involves the precision machining and assembly of five Pump Cover Assemblies, specifically part number DS-922542 under NSN 1650-00-790-9720, for the Department of Defense DLA Weapons Support Fluid Handling Division. The work must be performed at Hill AFB and requires strict adherence to the DLA Master List of Technical and Quality Requirements, utilizing CNC machining and specialized inspection equipment for Critical Application Items. Quality assurance is a primary requirement, with mandatory sampling conducted according to MIL-STD-1916 or ASQ H1331 standards. The project falls under NAICS code 336413, with a response deadline set for November 16, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326199
New
DIBBS
O-Ring Supply (NSN 5331-01-013-9653)This subcontract involves the manufacture and supply of 138 asbestos-free O-rings for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced according to NSN 5331-01-013-9653 specifications and delivered FOB Origin to Tracy, California. The contractor is required to adhere to strict quality assurance and packaging standards, including MIL-STD-1916 or ASQ H1331 for quality, and MIL-STD-2073-1E and MIL-STD-129 for marking. All items must be sealed in MIL-DTL-117 waterproof, greaseproof, and opaque bags. Additionally, the supplier must maintain full compliance with the Buy American Act and the Berry Amendment.
All Other Plastics Product Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332997
New
DIBBS
Precision Casting and Forging for Fuel Pump ComponentsThis subcontract involves the precision casting and forging of raw structural components for fuel pump parts, specifically identified by NSN 2910003557669, to support prime contractors under DLA supply contracts. The selected provider will utilize industrial casting furnaces or forging presses to produce high-grade alloy blanks according to strict technical specifications, which are then delivered to the prime manufacturer for final machining. Managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, the project is categorized under NAICS code 332997 and requires full compliance with Buy American regulations. Performance will take place in Albany, and the solicitation period runs from November 5, 2026, through November 16, 2026.
Industrial Pattern Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
Engine Fuel Pump Kit Fabrication and SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, involves the fabrication and supply of 18 complete parts kits for engine fuel pumps, identified by NSN 2910003557669. The scope of work requires precision fabrication of components and kit assembly utilizing specialized tooling, casting, and forging processes to support prime contractors on DLA supply contracts. The contractor must ensure strict adherence to MIL-STD-2073-1 Appendix D and MIL-STD-129 for all packaging and marking requirements. Additionally, a CMMC Level 2 self-assessment is mandatory for compliance. Performance of the contract will take place in Albany, Georgia, under NAICS code 333611.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332813
New
DIBBS
Cadmium Plating Services for Steel FittingsThis subcontract involves providing specialized cadmium plating services for the DLA Weapons Support Fluid Handling Division. The scope of work requires the surface preparation and application of cadmium plating on 128 steel street elbows to ensure they meet strict corrosion resistance specifications. All work must be performed in compliance with hazardous materials labeling standards per 29 CFR 1910.1200 and requires the necessary environmental permits for cadmium processing. The project is categorized under NAICS code 332813 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to provide the finished cadmium-plated steel elbows as required by the Department of Defense.
Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Manufacturer of Steel Street Elbows (NSN 4730-01-059-4126)This subcontract involves the manufacture and delivery of 128 steel street elbows for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The required components must feature a 90-degree flow angle, a 1-1/4 inch nominal pipe size, and female NPTF to male NPTF threads capable of withstanding a 3000 PSI pressure rating. The use of additive manufacturing is strictly prohibited for the production of these fittings. To be eligible, the provider must maintain US/Canada Joint Certification Program certification and ensure full compliance with ITAR and EAR regulations. The project is categorized under NAICS code 332710, with performance taking place in New Cumberland. Interested parties must respond by November 16, 2026.
Machine Shops

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333613
New
DIBBS
MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing specialized military-grade packaging, marking, and palletization services for the Department of Defense, specifically under the DLA Weapons Support Fluid Handling Division. The scope of work requires the processing of 1,863 tube caps to be delivered via FOB Origin shipment. All activities must strictly adhere to military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization, utilizing specific unit and intermediate container configurations. The project is categorized under NAICS code 333613 and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 16, 2026, for this specialized logistics requirement supporting prime contractors on DLA projects.
Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332710
New
DIBBS
Manufacturer of Steel Tube Caps (NSN 4730013592430)This subcontract involves the manufacture and delivery of 1,863 steel tube caps for the Department of Defense, specifically supporting the DLA Weapons Support Fluid Handling Division. The contractor is responsible for fabricating the components using precision machining or forming equipment to ensure full compliance with technical standards SAE J1453-3 and SAE J1453-1-2012. The agreement mandates strict adherence to the Buy American Act and prohibits the use of Class I ozone depleting chemicals during production. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.
Machine Shops

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
Supply of Butt Hinges (NSN 5340-00-664-8138)This subcontract involves the manufacture and supply of 37 specialized butt hinges, identified by part number MS20001P12-7200 and NSN 5340-00-664-8138, for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The items must be produced in strict accordance with Basic Specification MS20001P, Revision P, and Technical Data Package Rev A Gen 1, with packaging and compliance for critical application items meeting MIL-STD-129 standards. The contract falls under NAICS code 332510 and is associated with the Department of Defense. Performance for this requirement is located in Cherry Point, with a response deadline set for November 16, 2026.
Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493110
New
DIBBS
Specialized Packaging and Palletization ServicesThis subcontract for Specialized Packaging and Palletization Services supports prime contractors on DLA supply contracts under the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The scope of work involves the packaging, labeling, and palletization of materials, including the handling of hazardous and radioactive materials using specialized industrial containment equipment. All deliverables must be ready for transport and strictly adhere to RP001 DLA Packaging Requirements, MIL-STD 129 labeling standards, and ASTM D3951 packaging specifications. The performance of these services will take place in New Cumberland, Pennsylvania, under NAICS code 493110. The opportunity was posted on November 5, 2026, with a response deadline of November 16, 2026.
General Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

in 10 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS