ELBOW, PIPE TO TUBE

ELBOW,PIPE TO TUBE
ELBOW, PIPE TO TUBE. TYPE 321 CORROSION
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RESISTING STEEL MATERIAL, PASSIVATED FINISH, 90
DEGREE FLOW ANGLE, 5/16 INCH O.D. TUBE SIZE
(1/2-20UNJF-3A THREADS TUBE END) TO 1/8 INCH
NOMINAL PIPE SIZE (MALE ANPT THREADS), MILITARY
SPECIFICATION TITLED "FITTINGS, FLARED TUBE<(>,<)>
FLUID CONNECTION", AIRCRAFT APPLICATION<(>,<)>
EXCEPTION: USE AS5195, P/N AS5195R0502 I/L/O
MS20822, P/N MS20822-5S
CLASS 3 THREADS APPLY TO THIS NSN.
THIS NSN IS LISTED AS A PRIMARY QPL OR QML
THEREFORE THE QUALIFIED PRODUCTS LIST OR
QUALIFIED MANUFACTURERS LIST IS APPLICABLE.
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
"MIL-F-5509 HAS BEEN CANCELED. WHEN MIL-F-5509
IS SPECIFIED ON PROCUREMENT DOCUMENTS, USE
APPLICABLE SUPERSEDING SAE AEROSPACE STANDARDS
AS SHOWN IN CANCELLATION NOTICE 2 OF MIL-F-5509D
(4) SUPP.1."
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
SPE7M0-27-T-0407
SECTION B
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS IS A PERFORMANCE REVIEW INSTITUTE (PRI) QML OR QPL ITEM. PRIOR TO
AWARD, THE BUYER SHALL OBTAIN A DATED COPY OF THE CURRENT PRI QML OR QPL
FOR FILING IN THE ELECTRONIC CONTRACT FILE(ECF). THE PRI QML OR QPL IS
AVAILABLE FROM WWW.EAUDITNET.COM.
TDP Rev A Gen 1 IAW BASIC NON GOVT STD SAE AS5195D REVISION NR D DTD 06/01/2020 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS4842 REVISION NR B DTD 03/01/2021 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE NON GOVT STD SAE AS4842/1 REVISION NR A DTD 06/01/2016 PART PIECE NUMBER: AS5195R0502
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018693419 0001 EA 50.000
NSN/MATERIAL:4730010106205
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
SPE7M0-27-T-0407
SECTION B
PR: 7018693419 PRLI: 0001 CONT’D
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
MARKFOR
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
M/F: (TCN) W31G1Y627800Y3
RDD: 285
PROJ: TP 1
SUPP ADD: W31G1Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VE
Need Ship Date:00/00/0000 Original Required Delivery Date:10/08/2026
SPE7M0-27-T-0407 NSN/Part Number: 4730-01-010-6205 Quantity: 50 EA Purchase Request: 7018693419QTY: 50 Delivery: 5 days ADO