Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ELBOW, TUBE

Active
SPE7M3-26-T-7656Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 14 units of an elbow tube with NSN 4730-01-532-5084 and part number 7M1194-1-06A, issued under solicitation SPE7M3-26-T-7656 by the Department of Defense’s Fluid Handling Division. Delivery is required within 133 days of the award, with FOB origin terms and inspection and acceptance occurring at the destination in San Diego, California. The item must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA’s packaging requirements, while complying with all technical and quality standards listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications. Sampling and verification must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Contractual obligations include compliance with cybersecurity requirements at CMMC Level 2 through a self-assessment and adherence to DLA’s tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. The supplier must remove all government identification from non-accepted supplies and ensure full traceability and labeling per federal guidelines. The unit of issue is each, with no variance allowed in quantity, and the delivery must be completed no later than June 10, 2026, despite the original required date being March 23, 2027. The contract specifies the delivery address, transportation protocols per DLAD procedural notes, and designates William Cain as the primary point of contact. Only certified suppliers including KIRKHILL, INC., THE BOEING COMPANY, FLEXCO, INC, and CMI RUBBER COMPANY INC. DBA are authorized to fulfill this requirement.

General Info

Procure 14 elbow tubes NSN 4730-01-532-5084, deliver to San Diego by June 10, 2026, per DLA specs, CMMC Level 2, certified suppliers only.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332919 - Other Metal Valve and Pipe Fitting ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

SPE7M3-26-T-7656.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
William Cain
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELBOW,TUBE
ELBOW,TUBE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
KIRKHILL, INC. 75345 P/N 7M1194-1-06A THE BOEING COMPANY 76301 P/N 7M1194-1-06A FLEXCO, INC 99135 P/N 7M1194-1-06A CMI RUBBER COMPANY INC. DBA 7R245 P/N 7M1194-1-06A
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE7M3-26-T-7656
SECTION B
PR: 7017602888 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017602888 0001 EA 14.000
NSN/MATERIAL:4730015325084
DELIVERY (IN DAYS):0133
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:06/10/2026 Original Required Delivery Date:03/23/2027
SPE7M3-26-T-7656 NSN/Part Number: 4730-01-532-5084 Quantity: 14 EA Purchase Request: 7017602888QTY: 14 Delivery: 133 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332919
New
DIBBS
COUPLING HALF, QUICKThe contract pertains to the procurement of one coupling half, quick, identified by part number 701-1500-146 and NSN 4730-01-556-4229, with a sole quantity of one unit and a total price of one dollar. Delivery is required within twenty days to the designated destination, with FOB terms specifying delivery to the destination point where inspection and acceptance are also to occur. The product must be packaged strictly in accordance with MIL-STD-2073-1E, using packaging method 31, dry preservative, with no cushioning material specified other than high density, and marked per MIL-STD-129 without any special marking codes. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, with revisions tied to the solicitation or award date depending on acquisition type. The shipment must be delivered to APO AP 96278-2069, with alternate freight shipping instructions pointing to Osan Air Base in South Korea. The solicitation number is SPE7M3-26-T-7673, with a response deadline of August 3, 2026, and the original required delivery date set for July 21, 2026. Primary contact for inquiries is William Cain, and the procurement falls under NAICS code 332919 with oversight by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
MANIFOLD ASSEMBLY, HThe contract pertains to the procurement of one hydraulic manifold assembly identified by NSN 4730-01-317-8276 and part number WE-00210-16R13, designated as a critical application item for use on landing craft air cushion (LCAC) systems. The item is classified as a commercial item and must comply with strict technical and quality requirements outlined in the DLA Master List, including adherence to MIL-STD-2073-1E packaging standards and MIL-STD-129 marking specifications. The manifold must not contain or come in direct contact with mercury or mercury-containing compounds, except for functional applications in batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The supplier must meet CMMC Level 2 self-assessment requirements and comply with DLA packaging and procurement directives, including the removal of government identification from non-accepted supplies. Delivery is required within 244 days from the contract issue date, with FOB origin terms and inspection and acceptance occurring at the destination point in San Diego, California. The delivery schedule is fixed with zero variance allowed in quantity, and the item must be palletized according to DLA packaging requirements. Shipping instructions reference DLAD procedural notes C19 and C20, and the designated delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581. The original required delivery date is April 11, 2026, although a need ship date of June 3, 2025, is indicated. The contract is issued under solicitation SPE7L1-26-T-874B, classified under NAICS code 332919, with point of contact Rodney McNinch for inquiries. The unit of issue is each (EA), and the pricing and payment terms are structured through the associated purchase request 7010228569.
LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
BODY, VALVEThis contract pertains to the procurement of a valve body identified by NSN 4820-01-535-4414 and part number 3268126-C1, with a total quantity of three units to be delivered FOB origin within 168 days. The item is supplied by FMC Technologies Inc DBA FMC Fluid and must comply with strict packaging standards per MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, cushioning materials, and unit containment requirements. All packaging and labeling must adhere to DLA’s procurement guidelines, with no special marking required. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and inspection and acceptance are to occur at the destination. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for limited exceptions including functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA, with portable devices containing mercury requiring double containment and shock resistance per NAVSEA 5100-003D. The solicitation is a total small business set-aside under NAICS code 332919, with a response deadline in August 2026 and an original required delivery date of February 1, 2027. The unit of issue is each, priced at $3.00 per unit, with zero variance allowed in quantity. All technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, and the applicable revision is determined by the solicitation or award date. Transportation and shipping instructions follow DLAD procedural notes C19 and C20.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
FLUSH MOUNTED DRAINThe contract awards a flush-mounted drain with NSN 4730-01-554-8417 and part number 710C6CX from Auto-Valve, Inc., requiring 44 units to be delivered within 168 days of contract award, with a required delivery date of November 24, 2026, and a need ship date of January 19, 2027. The unit price is $44.00 per EA, totaling $1,936.00, with no variance allowed in quantity. Delivery is FOB origin, with inspection and acceptance occurring at the destination. All packaging must comply with ASTM D3951, subject to the overriding authority of the DLA Master List of Technical and Quality Requirements, and labeling and palletization must follow MIL-STD-129 and RP001 packaging guidelines. The product is to be delivered to the DLA Distribution DDSP New Cumberland Facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002, as specified in the shipping instructions. Compliance with all referenced technical and quality standards identified by R or I numbers from the DLA Master List is mandatory, and the revision in effect on the solicitation issue date controls. The solicitation number is SPE7M3-26-T-7676, issued on July 23, 2026, with a response deadline of August 3, 2026, under NAICS code 332919, and the primary point of contact is William Cain at the Fluid Handling Division of the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
INDICATOR, VALVE OPEThe contract involves the procurement of three Indicator, Valve OPE units under solicitation number SPE7MC-26-T-150N, with a delivery requirement of 168 days ADO. The item is identified by NSN 4820-01-453-8321 and is part of a federal procurement managed by the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure to foreign persons, including foreign nationals within the U.S., requires prior authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this controlled data, and only contractors with approved U.S./Canada Joint Certification Program status, completion of DOD export control training, and clearance from DLA may access the information. The contractor must also have passed DLA’s Export-Controlled Technical Data Questionnaire to qualify. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and falls under NAICS code 332919. All communications regarding this contract should be directed to Paula Mcclary at fmda3302@dla.mil or 614-692-0417.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
COUPLING HALF, QUICK DIThe contract is for 82 units of a coupling half, quick disconnect, identified by NSN 4730-01-241-8819 and part number 8HP16 from DANFOSS POWER SOLUTIONS II, LLC, with a unit price of $82.00 and a total contract value of $6,724. The item is designated as a critical application component featuring a steel socket with a female SAE straight thread, 0-rings, a seal boss, and a 1-5/16-12 inch female end fitting, measuring 4.130 inches in overall length and 2.630 inches in diameter. Delivery is required FOB origin with zero variance in quantity, inspection and acceptance occur at the destination, and the item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and unit and intermediate container standards. Marking must adhere to MIL-STD-129 with no special marking requirements, and palletization must follow DLA packaging guidelines. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses such as batteries, fluorescent lamps, sensors, or weapon systems, with portable devices containing mercury requiring shockproof design and a secondary containment boundary as per NAVSEA 5100-003D. The delivery deadline is 225 days from the contract award, with the original required delivery date set for May 19, 2027, and a needed ship date of March 17, 2027. All supplies must be delivered to the designated receiving facility at DLA Distribution Barstow, Central Receiving Warehouse 7, in Barstow, California. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract was issued under solicitation SPE7M3-26-T-7626, posted on July 23, 2026, with responses due by August 3, 2026, and falls under NAICS code 332919 for miscellaneous fabricated metal product manufacturing.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
VALVE, LINEAR, DIRECTThe contract specifies the procurement of a linear direct valve with NSN 4820016231047 and part number S23-12311-0 from Parker-Hannifin Corporation, under solicitation SPE7MC-26-T-151Y. Two units are required to be delivered FOB origin within 168 days, with no variance allowed in quantity. All deliveries must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including the use of packaging code U and prohibition of any mercury or mercury compounds in preservation, packaging, packing, or marking. The item must not contain intentional mercury additions except for specified functional applications such as batteries or instrument controls as defined by NAVSEA, and portable fluorescent lamps or instruments containing mercury must have shock-proof construction and secondary containment per NAVSEA 5100-003D. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and the contract is subject to DLA packaging and transportation directives including Proc Notes C19 and C20. This procurement is a total small business set-aside under NAICS code 332919, issued by the Department of Defense through the DLA New Cumberland facility. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and includes technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements. The unit of issue is each, with a total contract value of $2.00 per unit. The item must be inspected and accepted at the destination point, and all documentation and procedures must align with DLA’s authorized procurement practices, including the use of the correct ANSI X12 unit of issue. The primary point of contact for the solicitation is Paula McClary at DLA, with details available via the DIBBS portal.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER BUSHINGThe contract is for the procurement of 183 units of an Adapter Bushing, identified by part number FTB-4-0-1-.150-S and NSN 4730015758801, sourced from Fatigue Technology, Inc. as a commercial off-the-shelf item. Delivery is required within 68 days of contract award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization strictly adhering to DLA Packaging Requirements. All technical and quality specifications take precedence over ASTM and are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The unit of issue is each, with no variance permitted in quantity. Delivery must be made to DLA Distribution Warner Robins at Robins AFB, Georgia, with a required ship date of July 1, 2026, and original delivery deadline of November 18, 2026. Transportation and shipping instructions reference DLAD Proc Notes C19 and C20. The solicitation number is SPE7M3-26-T-7662, with a response deadline of August 3, 2026, and primary point of contact is William Cain at the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
FLANGE, PIPE, SWIVELThe contract specifies the procurement of 28 units of FLANGE, PIPE, SWIVEL with NSN 4730015548345 under solicitation SPE7M3-26-T-7660, with a unit price of $28.00 and a total value of $784.00. Delivery is required FOB origin within 168 days, with a required ship date of January 19, 2027, and an original delivery deadline of December 6, 2026. The quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Inspection and acceptance both occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling requirements, with all DLA Master List of Technical and Quality Requirements taking precedence. The unit of issue is each, with packaging specified as QUP:001. All items must be palletized according to DLA packaging requirements and shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania. The contract references DLA packaging and technical requirements, which supersede any general standards and must be fully adhered to. The solicitation falls under a simplified acquisition and is governed by the DLA Master List revision in effect on the award date. Transportation and freight protocols are controlled by DLAD Proc Notes C19 and C20. The point of contact for the contract is William Cain, with contact information provided, and the procurement is managed by the Department of Defense’s Fluid Handling Division. The NSN and part number 3-2-559 are associated with two approved suppliers, Dana Commercial Vehicle Manufacturing and Ameridrives International, LLC. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, under NAICS code 332919 for other fabricated metal product manufacturing.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
PARTS KIT, DIAPHRAGMThe contract pertains to a Parts Kit, Diaphragm with NSN 4820-01-583-1118, quantity of two units, under solicitation SPE7M4-26-T-282F, with a response deadline of August 3, 2026, and delivery required within 168 days after award. The kit includes a valve diaphragm, O-ring, and Dynaseal, all sourced from CAGE 20722, replacing three prior NSNs. This is a restricted-source item requiring formal engineering approval from the government’s design control activity. Manufacturing may involve casting or forging, for which tooling may not be held by the government, and vendors must submit a Casting and Forging Assistance Request if needed. The item is subject to the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation or award date depending on acquisition size. The contract strictly prohibits the intentional use of mercury or mercury-containing compounds in any supplied hardware, except for limited functional uses in batteries, lighting, instrumentation, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Vendors must comply with MIL-T-31000 by submitting all manufacturing drawings, detailed operation and inspection sheets, source identification for critical processes, purchase order copies, and a shock test report conforming to MIL-S-901 and DI-ENVR-80706. If original OEM drawings are unavailable, an engineering analysis must be provided detailing reverse engineering methodology including sample counts, measurement techniques, data compilation, and rationale for dimensional deviations. All documentation must be forwarded to the government’s engineering support activity for review, and the place of performance is designated as New Cumberland, PA, with Blake Tushar as the primary point of contact.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
ADAPTER, STRAIGHT, TUBEThe contract pertains to a straight adapter fitting, specifically a tube-to-boss type, identified by NSN 4730-01-618-1180 and part number 4-4 080 120S, manufactured in accordance with SAE J514-2 Revision NR dated 04/01/2024. A single unit is required with a firm fixed price of $1.00, and delivery is mandated within ten days from the ordered date, FOB origin. The item must be packaged per ASTM D3951 and marked in compliance with MIL-STD-129, while adhering strictly to DLA’s Packaging Requirements for Procurement (RP001), which supersede all general packaging standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be pre-approved unless explicitly authorized. Technical and quality requirements defined by R and I numbers in the DLA Master List of Technical and Quality Requirements are binding and take precedence over all other specifications. The delivery destination is the U.S. Army’s 2-1st AD AWCF SSF facility at Fort Bliss, Texas, with shipment required via the fastest traceable means, excluding parcel post. The requirement is for a single unit, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The solicitation number is SPE7M3-26-T-7671, with a response deadline of August 3, 2026, and the original required delivery date is July 21, 2026. The item is subject to full and open competition, and all labeling, packaging, and unit of issue specifications must conform exactly to the contract terms, including the designated QUP and palletization standards. The point of contact for inquiries is William Cain, and the contract is managed by the Department of Defense’s Fluid Handling Division.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332919
New
DIBBS
STEM AND DISC ASSEMThe contract pertains to the procurement of two STEM AND DISC ASSEMBLY units for use on a 1-1/2 inch stop valve, manufactured from stainless steel. The item is identified by NSN 4820-01-555-9523 and is part of a solicitation issued by the Defense Logistics Agency under contract number SPE7MC-26-T-153H, with a response deadline of August 3, 2026 and a delivery requirement of 168 days after award. The procurement is governed by DLA packaging requirements and falls under a federal acquisition context managed by the Department of Defense’s New Cumberland facility. The technical data associated with the assembly is subject to strict export control under either ITAR or EAR regulations, prohibiting unauthorized disclosure to foreign persons, including foreign nationals within the United States or overseas. Compliance with DFARS 252.225-7048 is mandatory, and only contractors with approved US/Canada Joint Certification Program status, completed DLA training on export-controlled data handling, and formal authorization from DLA may access the restricted information. Additionally, the vendor must be certified at CMMC Level 2 by an accredited third-party assessment organization, and the contract applies to covered defense information under RD002 requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 493190
New
DIBBS
Logistics and Destination Inspection CoordinationThe contract requires coordination of final packaging, shipping, and destination inspection for Department of Defense deliveries, ensuring full compliance with military logistics standards. Key responsibilities include preparing and submitting all required documentation such as DD Form 1155 and adhering to WAWF protocols to guarantee accurate and timely delivery tracking and acceptance. The work must be performed in alignment with Defense Logistics Agency procedures to maintain supply chain integrity and meet government reporting requirements. The contract is classified as a subcontract under NAICS code 493190 and is associated with the Fluid Handling Division of the Department of Defense. The place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026. All parties must ensure operational readiness, regulatory compliance, and seamless integration with DoD logistics systems throughout the execution of this task.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Material Labeling and Compliance ServicesThe contract requires the application of OSHA-compliant hazard communication labels on packaging or components containing hazardous substances, ensuring full adherence to 29 CFR 1910.1200 and DFARS 252.223-7001. This是一项对标签内容、格式、 durability 和信息准确性的严格要求，涵盖所有危险化学品的分类、信号词、危害说明、防范说明以及供应商标识，以满足联邦安全和 defense supply chain compliance standards. The work is performed under a subcontract and must be executed at the designated place of performance in New Cumberland, Pennsylvania, with ZIP code 17070-5002. The solicitation falls under NAICS code 541690, indicating scientific and technical consulting services, and is managed by the Fluid Handling Division within the Department of Defense. The opportunity was posted on July 23, 2026, with a firm response deadline of July 28, 2026. While no set-aside type is specified, contractors must be prepared to demonstrate capability in hazardous material labeling, knowledge of regulatory frameworks, and ability to maintain consistent quality control in a defense production environment. All deliverables must meet exacting DoD compliance standards, and documentation of label generation, verification, and application processes will be critical to successful contract performance.
Other Scientific and Technical Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 423520
New
DIBBS
Supply of Raw Materials and Specialty MetalsThe contract entails the supply of defense-grade metallic stock, including stainless steel and brass, manufactured to exact original equipment manufacturer specifications with full material traceability and certified material test reports. All materials must meet stringent quality and compliance standards required for military and defense applications, ensuring integrity, performance, and reliability under operational conditions. The materials are to be delivered to a designated performance location in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and the contracting entity is the Fluid Handling Division under the Department of Defense. The solicitation is classified as a subcontract under NAICS code 423520 and was posted on July 23, 2026, with a firm response deadline of July 28, 2026. There is no set-aside designation indicated, meaning the opportunity is open to all eligible contractors regardless of business size or certification status. The procurement is managed through the DLA DIBBS platform, and bidders must ensure adherence to all technical, documentation, and delivery requirements outlined by the agency to be considered for award.
Coal and Other Mineral and Ore Merchant Wholesalers

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining and Fabrication of Quick-Disconnect Coupling HalfThe contract calls for the manufacture of 16 units of a quick-disconnect coupling half, fabricated strictly in accordance with OEM drawings and military specifications. The work encompasses full CNC machining operations to meet precise dimensional and surface finish requirements, followed by comprehensive quality inspection to ensure compliance with all technical standards. Each unit must be verified for conformance prior to packaging. Final deliverables are to be packaged per MIL-STD-129 requirements, ensuring proper labeling, handling, and preservation for military logistics. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The NAICS code 332710 confirms this is a precision machining and fabrication task under the metal fabrication manufacturing category. The contract is classified as a subcontract under the Department of Defense’s Fluid Handling Division and was posted on July 23, 2026, with responses due by July 28, 2026.
Machine Shops

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight & Delivery to Hill AFB, UtahThe contract is for the domestic transportation and delivery of filter elements to the DLA Distribution Depot at Hill Air Force Base, Utah, with a ZIP code of 84056-5734, under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. The solicitation is categorized as a subcontract under NAICS code 484220, which corresponds to truck transportation for local and long-distance freight. The agency responsible is the Fluid Handling Division within the Department of Defense, and the performance location is clearly identified as Hill AFB. The opportunity was posted on July 23, 2026, with a response deadline of July 28, 2026, indicating a tight five-day window for submissions. Access to detailed solicitation information is available through the DIBBS system via the provided URL, though no specific point of contact or set-aside details are listed in the data.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Covered Defense InformationThe contract requires the implementation and ongoing maintenance of security controls aligned with NIST SP 800-171 to safeguard covered defense information within the contractor’s systems and operations. This includes establishing, monitoring, and sustaining technical and procedural safeguards that meet federal requirements for protecting sensitive unclassified information related to defense contracts. The contractor must ensure full compliance with all applicable controls, conduct regular assessments, and promptly report any cyber incidents that compromise the confidentiality, integrity, or availability of covered defense information in accordance with mandated reporting timelines and procedures. Performance is tied to Hill Air Force Base, Utah, with the requirement that all cybersecurity measures are fully operational and auditable at the designated location. The contract is structured as a subcontract under the Department of Defense, specifically managed by the Fluid Handling Division, and falls under NAICS code 541512 for computer systems design services. Proposals must be submitted by the deadline of July 28, 2026, and successful bidders will be expected to demonstrate proven experience in implementing and managing NIST 800-171 frameworks, as well as the capacity to respond to and report cybersecurity events in a timely and compliant manner.
Computer Systems Design Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Labeling, and Marking Services for Government ShipmentsThe contract requires compliant packaging, labeling, and marking of shipments in accordance with Defense Logistics Agency and federal regulations, with FOB Origin delivery specified at Hill AFB, Utah. All work must adhere strictly to established government standards to ensure proper handling, identification, and traceability of materials throughout the supply chain. Performance is localized to the Hill AFB area with a ZIP code of 84056-5734, and the contract is classified as a subcontract under NAICS code 493190, which pertains to other transportation support activities. The solicitation was posted on July 23, 2026, with a firm response deadline of July 28, 2026, and is managed by the Fluid Handling Division within the Department of Defense.
Other Warehousing and Storage

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Materials Compliance & Safety Data Sheet (SDS) ManagementThe contract pertains to the preparation and submission of Safety Data Sheets (SDS) and ensuring full compliance with hazardous material labeling standards for all shipped items, specifically under the purview of the Fluid Handling Division within the Department of Defense. The scope requires accurate, up-to-date documentation aligned with global regulatory frameworks to support safe handling, storage, and transportation of hazardous substances. All SDS must be properly formatted, complete with required sections including identification, hazard classification, composition, first-aid measures, fire-fighting instructions, accidental release procedures, handling and storage guidance, exposure controls, and environmental impact data, ensuring alignment with OSHA HazCom and GHS standards. Performance is localized at Hill Air Force Base, Utah, with a zip code of 84056-5734, and the work falls under NAICS code 541620, indicating technical and scientific consulting services related to environmental and safety compliance. The solicitation was posted on July 23, 2026, and responses are due by July 28, 2026, with a subcontract structure indicating the work will be performed by a third-party vendor engaged by a prime contractor. The contract does not specify set-aside status or point of contact details, but the requirement is critical for operational safety and regulatory adherence within defense logistics operations. Failure to meet labeling or SDS submission requirements may result in shipment delays, non-compliance penalties, or disruption of mission-critical supply chains.
Environmental Consulting Services

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333998
New
DIBBS
Fluid Filter Element Manufacturing or SupplyThe contract calls for the supply of 750 commercial fluid filter elements identified by NSN 4330-01-251-8902, which must fully comply with DLA technical specifications to ensure operational compatibility and performance standards. The requirement is part of a subcontract under the Fluid Handling Division of the Department of Defense, with performance location designated at Hill Air Force Base, Utah, 84056-5734. The solicitation was posted on July 23, 2026, with responses required by July 28, 2026, emphasizing a tight five-day submission window. The NAICS code 333998 indicates the work falls under miscellaneous manufacturing industries, suggesting the supplier must demonstrate specialized capability in producing precision fluid filtration components. All deliverables are expected to meet strict military-grade quality and certification benchmarks without set-aside provisions, making the opportunity open to qualified commercial manufacturers able to fulfill the volume and specification demands on schedule.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details
NAICS: 331512
New
DIBBS
COUPLING HALF, QUICKThe contract pertains to the procurement of a Coupling Half, Quick Disconnect with NSN 4730008807011 and part number 3018S4-16D from Eaton Aeroquip LLC, issued under solicitation SPE7M3-26-T-7675 by the Department of Defense’s Fluid Handling Division. Three line items are specified: one each for single units with purchase request numbers 7017589200 and 7017607315, totaling two individual units, and a third line item for twenty units under purchase request 7017589201, bringing the total quantity to twenty-two units. All items must be delivered within twenty days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the delivery destination. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take full precedence, including mandatory labeling under MIL-STD-129 and palletization per RP001. The product is classified as a critical application item, and government identification must be removed from non-accepted supplies. Delivery is to Dover Air Force Base, with shipping strictly prohibited via parcel post and required to use the fastest traceable means. The required delivery dates range from July 21 to July 22, 2026, with a response deadline of August 3, 2026, and the NAICS code is 331512. The point of contact is William Cain, reachable at william.cain2@dla.mil or 6146925347.
Steel Investment Foundries

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, AIRCRThis contract is for the procurement of a hose assembly designated as HOSE ASSEMBLY, AIRCR with NSN 4720015131157 and part numbers associated with Boeing, Northrop Grumman, and Parker Hannifin. Five units are required at a unit price of $5.00, totaling $25.00, with delivery due in 168 days FOB origin. Inspection and acceptance occur at the destination, and no variance in quantity is permitted. Packaging must comply with ASTM D3951 as a baseline, but all DLA Master List of Technical and Quality Requirements take precedence and must be followed, including proper marking and labeling per MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement. The delivery destination is specified as the DLA Distribution facility in New Cumberland, Pennsylvania, with detailed shipping and parcel post instructions provided. The original required delivery date is April 15, 2027, with a need ship date of January 19, 2027. The contract is administered under solicitation SPE7M4-26-T-280X, issued by the Department of Defense’s Fluid Handling Division, with Blake Tushar as the primary point of contact. All technical and quality specifications referenced by R or I numbers are incorporated by reference from the DLA Master List, with applicable revisions controlled by the solicitation issue or award date depending on acquisition size.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332996
New
DIBBS
COUPLING, TUBEThis contract is for the procurement of a tube coupling made from aluminum alloy, identified by NSN 4730-01-415-4443 and part number 02-0072-1-010 from Sargent Aerospace & Defense, LLC. The item is classified as a critical application item and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except under specific exemptions for functional uses in batteries, lighting, sensors, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must be shockproof and have a secondary containment boundary per NAVSEA 5100-003D. The item is not subject to Level 1/Subsafe requirements. Packaging must conform to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containerization, and marking must follow MIL-STD-129 without special marking codes. Palletization adheres to DLA packaging standards. The contract specifies a quantity of five units to be delivered FOB origin within 168 days, with no variance allowed in delivery quantity. Inspection and acceptance both occur at the destination, and the delivery must be shipped to DLA Distribution at the New Cumberland, PA facility. The original required delivery date is May 27, 2027, with a need ship date of January 19, 2027. Transportation and freight instructions follow DLAD procedural notes C19 and C20. The solicitation number is SPE7M3-26-T-7596, issued July 23, 2026, with a response deadline of August 3, 2026, under NAICS code 332996. The primary point of contact is William Cain of the Department of Defense’s Fluid Handling Division, and all units of issue align with DoD and ANSI X12 standards.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 21 hours ago

DEADLINE

in 10 days
View Details