Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ELBOW, TUBE TO HOSE

Active
SPE7M4-26-T-301AFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a 90-degree steel elbow fitting designed to connect a 1/2 inch outer diameter tube with a female threaded swivel nut to a hose fitting socket, classified as a critical application item. It is supplied under part numbers 90EFS-A1602A-0808 and 190469-8S by Hydrasearch Company, LLC, and is identified by NSN 4730-01-242-2831. The requirement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951, and packaging must conform to MIL-STD-129 and RP001 DLA Packaging Requirements. The item is to be delivered in a quantity of six units with zero variance permitted, shipped FOB origin within 20 days of contract award, and inspected and accepted at the destination. All shipments must be sent via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is NORFOLK, VA, with specific governmental shipping and parcel post instructions provided. The contract was issued under solicitation SPE7M4-26-T-301A, with a response deadline of August 17, 2026, and an original required delivery date of August 12, 2024. Pricing is fixed at $6.00 per unit, totaling $36.00. Packaging must reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract, with palletization and marking fully compliant with DLA standards. Government points of contact and administrative codes are included for official use only.

General Info

Six 90-degree steel elbow fittings, 1/2 inch, NSN 4730-01-242-2831, $6 each, FOB origin, DLA standards, delivery by August 12, 2024.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

332912 - Fluid Power Valve and Hose Fitting ManufacturingView NAICS

Place of Performance

CEP 200 SUITE 100, NORFOLK, VA, 23511-2124, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7M4-26-T-301A Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FLUID HANDLING DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → FLUID HANDLING DIVISION
View Agency Profile
Office AddressUS
Contacts
MICH'EL WHITE
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELBOW,TUBE TO HOSE
ELBOW, TUBE TO HOSE. STEEL MATERIAL, 90 DEGREE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FLOW ANGLE, 1/2 INCH O.D. TUBE SIZE (FEMALE
THREADED SWIVEL NUT) TO HOSE FITTING END
(SOCKET), SHORT.
CRITICAL APPLICATION ITEM
HYDRASEARCH COMPANY, LLC 32142 P/N 190469-8S
HYDRASEARCH COMPANY, LLC 32142 P/N 90EFS-A1602A-0808
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7008731110 0001 EA 6.000
NSN/MATERIAL:4730012422831
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take
SPE7M4-26-T-301A
SECTION B
PR: 7008731110 PRLI: 0001 CONT’D
precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
N40025
NSSA/DLA
9170 SECOND STREET
CEP 200 SUITE 100
NORFOLK VA 23511-2124
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N40025
MARMC
9170 SECOND STREET
CEP 200 SUITE 100
NORFOLK VA 23511
US
M/F: (TCN) N5005442202988
RDD: 227
PROJ: 5BA TP 2
SUPP ADD: N40025 SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 06
DIC: A4A DIST: 9B ADV: FC: QR
Need Ship Date:00/00/0000 Original Required Delivery Date:08/12/2024
SPE7M4-26-T-301A NSN/Part Number: 4730-01-242-2831 Quantity: 6 EA Purchase Request: 7008731110QTY: 6 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332912
New
DIBBS
Supply of Threaded Tube Fitting PlugsThe contract is for the procurement of commercial off-the-shelf threaded tube fitting plugs designed to seal unused ports in fluid or gas systems, with a total requirement of 1,668 individual plugs delivered in 834 packaging units, each containing two plugs. The solicitation is issued under the NAICS code 332912 and is structured as a subcontract, with a response deadline of August 17, 2026, and a posted date of August 5, 2026. Performance is specified to occur at Robins Air Force Base, Georgia, with the procurement managed by the Fluid Handling Division of the Department of Defense through its DIBBS platform. There is no set-aside designation specified, and no point of contact details are provided within the contract data.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
CONNECTING LINK, RIG
Solicitation # SPE7L3-26-T-148Z
The contract is for the procurement of 71 rigid connecting links with NSN 3040-01-094-9559 under solicitation SPE7L3-26-T-148Z, issued by the Department of Defense’s Land Supplier Operations Vehicle Support. The requirement is for full and open competition with a delivery deadline of 154 days after award. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and all applicable revisions are controlled by the solicitation issue date. The item is subject to stringent quality controls including Tailored Higher Level Contract Quality Requirements, Configuration Change Management via Engineering Change Proposal, and Inspection and Acceptance at Origin. Components must be sourced from Qualified Products Lists or Qualified Manufacturers Lists as specified. Export control restrictions apply due to technical data governed by ITAR or EAR, limiting access to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. The Defense Logistics Agency mandates compliance with cybersecurity certification at CMMC Level 2 by third-party assessment organizations and enforces strict protocols for handling covered defense information. Packaging must meet DLA standards, and government identification must be removed from non-accepted supplies. The point of contact for inquiries is Karen McCarley, and performance is designated for New Cumberland, PA with a response deadline of August 17, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7M4-26-T-300T
This contract specifies the procurement of a nonmetallic hose assembly with NSN 0001S00000053, totaling 15 units to be delivered within 286 days after order. The solicitation is issued under number SPE7M4-26-T-300T with a response deadline of August 17, 2026, and is designated as a Total Small Business Set-Aside under NAICS code 332912. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation or award date depending on acquisition size. Packaging, identification, configuration management, and export control directives are strictly enforced, including compliance with ITAR or EAR regulations for technical data, which restricts access to foreign persons unless authorized. Only DLA contractors approved under the US/Canada Joint Certification Program, having completed mandatory training and documentation, may handle such controlled data. The item must be marked per physical identification requirements, and non-accepted supplies must be stripped of government identification. Inspection and acceptance are to occur at the origin, and the place of performance is located in New Cumberland, Pennsylvania, with a primary point of contact at Blake Tushar of the Fluid Handling Division under the Department of Defense.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE7MC-26-T-169M
This contract specifies the procurement of a hydraulic dump valve under solicitation SPE7MC-26-T-169M, a Women-Owned Small Business Set-Aside, with a single line item for 401 units of part number C7903-2, manufactured to reference drawing NR 81755 C7903 Revision P dated 07/13/2020, and qualified under technical requirements from the DLA Master List. The item is restricted to approved sources including PALL AEROPOWER CORPORATION, AUTO-VALVE INC, NATIONAL MACHINE COMPANY, and HYDRAFLOW, with government engineering source approval mandatory. Strict prohibitions ban the use of Class I ozone-depleting chemicals, requiring substitution approval unless explicitly authorized. Delivery is FOB origin with no variance permitted, inspection and acceptance occurring at origin, and packaging must comply with ASTM D3951 and MIL-STD-129 as dictated by DLA packaging requirements, including palletization per RP001. The primary delivery is due within 397 days of contract award to DLA Distribution Depot Hill, Hill AFB UT, with a required ship date of November 29, 2025, and an original delivery deadline of September 12, 2026. A separate first article test line item is included as a single unit, serving as a mandatory quality verification requirement governed by FAR 52.209-4, with no separate pricing expected unless otherwise specified. The NSN is 4820010827257 and the contract is issued under the DoD authorized unit of issue, with all technical and quality standards prioritized over commercial standards.
DEPOT HILL

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332912
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-Q-0394
The contract pertains to the procurement of 10 units of a check valve identified by NSN 4820-01-020-1040, supplied by HYDRO-AIRE AEROSPACE CORP with part number 38-491, classified as a critical application item. Delivery is required 272 days after the award date, with FOB origin terms and inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements for Procurement, and the DLA Master List of Technical and Quality Requirements takes precedence over any conflicting standards. The valve must not contain or come into direct contact with mercury or mercury compounds, except under specific exceptions for functional use in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; where permitted, portable devices must include shock-proof housing and a secondary containment boundary per NAVSEA 5100-003D. The quantity is strictly fixed with no variance allowed, and the item is to be shipped to the DLA Distribution Depot in Tinker AFB, OK, with transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE7MC-26-Q-0394, posted on August 5, 2026, with a response deadline of August 12, 2026, and the purchase request is 7007472465, with a required delivery date of December 5, 2024.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332912
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7MC-26-T-169B
The contract pertains to the procurement of two linear directional control valves, identified by NSN 0001S00000053, under solicitation SPE7MC-26-T-169B, with a delivery deadline of 244 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R-numbers, and must be adhered to as per the revision in effect on the solicitation issue date or award date, depending on acquisition size. Inspection and acceptance occur at origin, and non-accepted supplies must have all government identification removed prior to return. The valves include components subject to a Qualified Products List or Qualified Manufacturers List, necessitating compliance with qualification standards outlined in Procurement Note H02. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly permitted by the specification. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons and requiring prior authorization from the Department of State or Commerce; DFARS 252.225-7048 applies, and only contractors with approved US/Canada Joint Certification Program certification, completed training, and DLA authorization may access the controlled data. The contracting office is the DOD’s New Cumberland facility, with Paula Mcclary as the point of contact, and the solicitation was posted on August 5, 2026, with responses due by August 17, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
VALVE, LINEAR, DIRECT
Solicitation # SPE7MC-26-T-168D
The contract specifies the procurement of a single linear directional control valve identified by NSN 4820-01-227-2995 and part number 106047038, supplied by Bird-Johnson Propeller Company, LLC, for a critical application. Delivery is required within 20 days FOB destination with no tolerance for quantity variance, and inspection and acceptance occur at the final delivery point. All packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, with specific packaging codes and methods outlined, and palletization must adhere to DLA’s packaging requirements. The item is subject to strict material controls, including prohibition of intentional mercury or mercury compounds unless exempted for specific functional uses such as batteries, lamps, or weapon systems, with additional containment requirements for portable devices. Non-magnetic materials must meet DOD-STD-2143, maintaining a relative magnetic permeability not exceeding 2.0 as tested per MIL-STD-2142A. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to solicitation or award dates depending on acquisition size. Configuration changes require formal engineering change proposals or variance requests, and removal of government identification from non-accepted supplies is mandatory. The delivery destination is USS WARRIOR MCM 10 at FPO AP 96683, with transportation governed by DLA procedures. The solicitation number is SPE7MC-26-T-168D, with a response deadline of August 17, 2026, and a required delivery date of August 3, 2026, under a federal procurement by the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
DIBBS
PLU G, TUBE FITTING, T
Solicitation # SPE7M3-26-T-7855
This contract specifies the procurement of a threaded tube fitting plug, identified by NSN 4730015427635 and part number MS21913V5P, in accordance with SAE AS18280H and SAE AS21913E standards. The product must be manufactured or assembled by a qualified supplier listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List, and compliance with all applicable DLA Master List of Technical and Quality Requirements is mandatory. The item must comply with Class 3 thread specifications and strictly prohibit the use of ozone-depleting chemicals, with any substitute chemicals requiring prior approval. A Certificate of Conformance is authorized unless explicitly withheld by a quality assurance instruction, and all units must be packaged per ASTM D3951 and labeled according to MIL-STD-129, with palletization following DLA packaging requirements. The contract calls for 834 pack groups, with each pack group containing two units, and the total quantity is non-negotiable with zero variance allowed. Delivery is required in 122 days FOB origin, with inspection and acceptance occurring at the destination. The shipment must be sent to DLA Distribution Warner Robins at Robins AFB, Georgia, using parcel post address SW3119, and must be scheduled for delivery by July 20, 2026, though the original required delivery date is January 15, 2027. Transportation instructions follow DLAD Proc Note C19 and C20, and the contract references U.S. government unit of issue standards. The solicitation was issued under contract number SPE7M3-26-T-7855 with a response deadline of August 17, 2026, and is managed by the Department of Defense’s Fluid Handling Division with William Cain listed as the point of contact.
FLUID HANDLING DIVISION

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332912
New
Federal
48--VALVE,SOLENOID, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEU
The contract is for the procurement of three solenoid valves, NSN 7H-4810-015103809, model S9515-AL-MMA-010, designated as item 12 under the technical data package version 003, to be delivered to DLA Distribution Norfolk, Virginia. The Government does not hold the data or intellectual property rights necessary to source this part from alternative suppliers, and it has been determined that acquiring such rights or reverse engineering the component is uneconomical. This item is uniquely sourced, and no competing sources exist due to proprietary restrictions. The Government intends to award this contract on a sole-source basis under FAR 6.302-1, but responsible parties may still submit proposals, quotations, or capability statements within 45 days of the notice publication, or 30 days if under an existing Basic Ordering Agreement. All submissions will be evaluated solely to inform the decision on whether competitive procurement is feasible. Award will be contingent upon the offeror, product, or manufacturer meeting all qualification requirements at the time of award, as defined by FAR clause 52.209-1. The contracting office is Navsup Weapon Systems Support Mech located in Mechanicsburg, Pennsylvania, with Dianne Wydra as the primary point of contact. The solicitation is issued as a Small Business Set Aside under the SBA program, and any participant must qualify as a small business to be eligible. Access to military specifications and related standards is available through ASSIST-Online or DODSSP, though critical documents such as drawings and deviation lists are not available through these channels.
Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 332912
New
Federal
16--BLD AIR SHUTOFF VLV, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QMB12
The U.S. Navy, through NAVSUP Weapon Systems Support, intends to award a sole-source contract for 26 units of the BLD AIR SHUTOFF VALVE with part number 5626-00-1 and NIIN 015612426 under authority of FAR 6.302-1, citing unusual and compelling urgency or sole source justification. The contract action is linked to the repair or modification of equipment and requires delivery FOB origin with the solicitation number N0038326QMB12. The requirement is not open for competitive bidding and is targeted exclusively at the original equipment manufacturer or qualified non-prime sources; any failure to respond will be interpreted as a lack of interest. Responses must be submitted within 45 days of the notice publication date of August 5, 2026, though this window reduces to 30 days if an existing Basic Ordering Agreement is used for award. All submissions will be evaluated solely to determine whether competition is feasible, with the final decision to proceed without competition resting entirely at the government’s discretion. The point of contact for inquiries is Stacey Ryan of the Philadelphia, PA office, reachable via email or phone, with the performance location unspecified but delivery terms clearly defined as FOB origin.
Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 332912
New
Federal
VALVE, REGULATING FLUID PRESSURE
Solicitation # 70Z08026P21097B00
The U.S. Coast Guard Surface Forces Logistics Center is soliciting quotations for five units of a specific regulating fluid pressure valve, NSN 4810-01-650-4104, with part number DA-2501F-FL, manufactured by Metrex Valve Corp. This valve is a two-way marine water regulating valve designed for 210 WMEC 5 and 25 ton A/C systems, with a maximum inlet pressure of 150 PSI and a refrigerant operating range of 50–190 PSIG, set at 43 PSI, featuring flanges per ANSI B16.24-150#, flare fitting bellows, and a weight of 35 pounds per unit. The valve must be mounted straight-through with flanges and is required to be individually packaged with bar-coding; standard commercial packaging is unacceptable and will result in disqualification. Only brand-name parts are eligible for award; equivalents must meet all salient physical, functional, and performance characteristics and are subject to Coast Guard approval. The solicitation is issued under FAR Subpart 12.6 for commercial items using simplified acquisition procedures, with a firm fixed-price contract anticipated. The NAICS code is 332912, and the small business size standard is 700 employees. Offers must come from responsible sources registered in SAM.gov with a valid DUNS number and tax identification. The authorized dealer for Metrex products is JA Moody LLC, and only offers meeting all packaging, marking, and compliance requirements will be considered. The deadline for submission is August 11, 2026, at 10:00 a.m. Eastern Standard Time. All offerors must complete and submit the required FAR representations and certifications, including those related to the Buy American Act, subcontractor restrictions, executive compensation reporting, and prohibitions against contracting with inverted domestic corporations or corporate expatriates, as well as compliance with HSAR and CGAP clauses. The award will be made on a lowest price technically acceptable basis, and the government intends to award on an all-or-none basis.
Sflc Procurement Branch 1(00080)

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332912
New
Federal
48--VALVE,SOLENOID, IN REPAIR/MODIFICATION OF
Solicitation # N0010426RYAEY
The contract involves the procurement of 25 units of a solenoid valve, NSN 7H-4810-015101451, model NV822142-1, for repair or modification purposes, with delivery directed to W25G1U at the DLA Distribution facility in New Cumberland, Pennsylvania. The Government does not hold ownership or rights to the technical data necessary to source this part from alternate suppliers, and obtaining such rights or reverse engineering the component has been deemed uneconomical. As a result, the procurement is being conducted under sole source authority per FAR 6.302-1, limiting competition to a single capable provider. All responsible parties may submit proposals, quotations, or capability statements within 45 days of the notice publication, or 30 days if awarded under an existing Basic Ordering Agreement, although this notice is not a formal request for competitive bids. Award will be contingent upon the offeror, product, or manufacturer meeting all qualification requirements at the time of award, in accordance with FAR clause 52.209-1. Technical documentation such as specifications, standards, and Qualified Product Lists can be accessed via ASSIST-Online or through the DoD Single Stock Point, though patterns, drawings, and deviation lists are not available through these channels. The solicitation, numbered N0010426RYAEY, is a Small Business Set Aside with total set-aside status, and the point of contact is Dianne Wydra of the Naval Supply Systems Command, Weapon Systems Support, located in Mechanicsburg, Pennsylvania.
Navsup Weapon Systems Support Mech

POSTED

about 22 hours ago

DEADLINE

in 2 months
View Details

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Priority-Rated Order Fulfillment (DX/DO Rating)This contract mandates the fulfillment of a priority-rated order under the Department of Defense’s DX/DO national defense rating system, requiring expedited supply chain execution to meet accelerated delivery timelines critical to national defense operations. The work must be performed in Anniston, Alabama, with all activities aligned to the NAICS code 484220, indicating specialized freight logistics services. As a subcontract, it is subject to stringent compliance with defense procurement protocols, including adherence to priority rating requirements that supersede standard commercial delivery schedules. The solicitation opens on August 5, 2026, and responses are due by August 17, 2026, with the Fluid Handling Division of the Department of Defense managing the procurement through the DIBBS platform.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance for Controlled Unclassified Information (CUI)The contract requires the implementation and ongoing maintenance of cybersecurity controls aligned with NIST SP 800-171 to safeguard Controlled Unclassified Information (CUI) processed, stored, or transmitted on non-federal systems supporting the agreement. Compliance with these controls is mandatory and must be continuously validated to ensure the protection of sensitive data on contractor-managed networks and environments. The work is scoped to support the FLUID HANDLING DIVISION under the Department of Defense, with performance located in Anniston, Alabama, and requires adherence to the NAICS code 541512 for custom computer programming services. The solicitation is issued as a subcontract with a response deadline of August 17, 2026, and was posted on August 5, 2026. Contractors must demonstrate the capability to establish, document, and sustain the required security controls as outlined in NIST SP 800-171, including but not limited to access control, audit and accountability, configuration management, identification and authentication, and incident response. Failure to meet compliance standards may result in contractual breach or termination, and ongoing monitoring and reporting of control implementation will be expected throughout the performance period.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and SDS ManagementThe contract pertains to the identification, documentation, and ongoing management of Safety Data Sheets for hazardous materials utilized in manufacturing or finishing processes under the Fluid Handling Division of the Department of Defense. Responsible parties must ensure full compliance with regulatory standards by accurately cataloging all hazardous substances, maintaining up-to-date SDS documentation, and implementing systems for continuous monitoring and updates as materials or processes change. The work is to be performed at a location in Anniston, Alabama, with a zip code of 36201-4199, and must be completed in alignment with the NAICS code 541690, which covers other scientific and technical consulting services. Proposals are due by August 17, 2026, and the solicitation was posted on August 5, 2026, with the contract designated as a subcontract. All activities must support the defense sector's safety and regulatory obligations without deviation, requiring robust procedures for traceability, accessibility, and training related to hazardous material handling.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 493190
New
DIBBS
Military-Compliant Packaging and Marking ServicesThe contract requires comprehensive packaging, labeling, and marking services for hydraulic tubes to meet strict military logistics standards, ensuring full traceability and readiness for distribution through the Defense Logistics Agency. All work must adhere to specified military compliance requirements to maintain supply chain integrity and operational readiness, with the performance location designated as Anniston, Alabama, at the zip code 36201-4199. The solicitation is issued as a subcontract under NAICS code 493190 by the Fluid Handling Division of the Department of Defense, and responses are due by August 17, 2026, with the opportunity posted on August 5, 2026. All activities must be executed to guarantee seamless integration into DLA’s distribution network, with emphasis on accuracy, durability, and regulatory alignment.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
Precision Hydraulic Tube Bending and FabricationThe contract calls for the precise manufacture and supply of bent metallic hydraulic buffer tubes adhering strictly to military specifications and quality standards, encompassing the full range of fabrication activities from material sourcing to final inspection. Each component must be produced using approved methodologies for precision bending, surface finishing, and dimensional accuracy, ensuring full compliance with designated military drawings and performance requirements. The work demands rigorous control over material integrity, process consistency, and quality assurance throughout all phases of production. Performance is required at the specified location in Anniston, Alabama, with a deadline for responses set for August 17, 2026. This is a subcontract opportunity under NAICS code 332996, managed by the Fluid Handling Division of the Department of Defense, indicating its direct relevance to defense-related fluid systems. All suppliers must demonstrate proven capability in meeting military-grade fabrication standards and be prepared to undergo stringent inspection protocols to validate conformity. The opportunity is open to qualified subcontractors without set-aside restrictions, and interested parties must submit proposals through the designated DIBBS portal prior to the closing date.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334290
New
DIBBS
Domestic Manufacturer of Military Interconnecting BoxesThe contract calls for the domestic manufacture and supply of interconnecting boxes that meet strict military specifications, with full adherence to the Berry Amendment and Buy American Act requirements, ensuring all materials and processing originate entirely within the United States. The products are intended for use by the Department of Defense’s Fluid Handling Division and must be delivered to the specified place of performance in Norfolk, Virginia, with a zip code of 23511-2701. The solicitation is structured as a subcontract opportunity under NAICS code 334290, which corresponds to Other Electrical Equipment and Component Manufacturing, indicating the technical nature of the components involved. Interested vendors must submit their responses by the deadline of August 17, 2026, with the solicitation posted on August 5, 2026. There is no designated set-aside for small businesses or other categories, meaning all qualified domestic manufacturers may compete. The contract emphasizes complete compliance with federal domestic sourcing mandates, requiring rigorous documentation and verification of origin for all materials and labor. All work must be performed in the United States, and the final products must be certified as meeting military standards without exception. The solicitation details can be accessed online through the DIBBS portal using the provided reference number.
Other Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 334290
New
DIBBS
Supply of Interconnecting Box (NSN: 5975015621270)The contract entails the procurement and delivery of six military-specification interconnecting boxes designated by NSN 5975015621270, to be delivered in full compliance with Defense Logistics Agency standards. Each unit must adhere to strict requirements for marking, hazardous materials disclosure, and cybersecurity protocols for covered defense information, ensuring both operational integrity and regulatory compliance. The delivery location is specified as Norfolk, Virginia, with the zip code 23511-2701, and the procurement is being managed by the Fluid Handling Division under the Department of Defense. Submitted responses are due by August 17, 2026, with the solicitation posted on August 5, 2026, under a subcontract structure classified under NAICS code 334290, which pertains to other electronic component manufacturing. Although no set-aside criteria or point of contact are provided, the requirement remains strictly for defense-related hardware meeting federal specifications. The full details and submission instructions are accessible via the DIBBS platform using the provided link.
Other Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 484220
New
DIBBS
Domestic Freight and Delivery to Anniston, AL (FOB Origin)The contract covers the domestic transportation of packaged and labeled strainer elements from the contractor’s origin to the Fluid Handling Division located in Anniston, Alabama, under FOB Origin terms, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. Delivery confirmation is required to verify successful receipt at the destination, ensuring accountability throughout the shipment process. The NAICS code 484220 indicates this is a freight transportation arrangement, specifically for trucking services related to household goods and moving services, though applied here to industrial components. This subcontract is issued by the Department of Defense’s Fluid Handling Division and is open for response until August 17, 2026, with the solicitation posted on August 5, 2026. The place of performance is clearly identified as Anniston, AL, with a ZIP code of 36201-4199, and the full logistical details are accessible through the provided DIBBS link for potential respondents.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 561910
New
DIBBS
Military Shipment Labeling and Marking ServicesThe contract requires compliance with MIL-STD-129 standards for the accurate application of shipment markings and labels on military cargo, including the use of standardized barcoding systems and mandatory hazardous material warnings aligned with federal transportation regulations. All labeling must be executed with precision to ensure proper identification, handling, and tracking of shipments throughout the defense supply chain, with particular attention to safety and regulatory adherence for dangerous goods. The work is scoped under subcontract terms with a performance location in Anniston, Alabama, 36201-4199, and is managed by the Fluid Handling Division of the Department of Defense. The solicitation is open for responses until August 17, 2026, with a posting date of August 5, 2026, and falls under NAICS code 561910 for other support activities for transportation. Bidders must be prepared to meet stringent military specifications and ensure full compliance with all federal and DoD labeling requirements to qualify for award.
Packaging and Labeling Services

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 385100
New
DIBBS
Military-Compliant Packaging and Preservation ServicesThis contract requires the cleaning, drying, and preservation of strainer elements in strict accordance with MIL-STD-2073-1E Method 33, Material 19, to meet military-standard criteria for protection during shipment and long-term storage. The work must ensure that each strainer element is prepared to withstand environmental hazards and maintain operational readiness throughout its lifecycle in military supply chains. The services are tied to a specific technical requirement that mandates adherence to federal defense packaging protocols, emphasizing material compatibility, moisture control, and corrosion prevention. The contract is classified as a subcontract under the NAICS code 385100, issued by the Fluid Handling Division of the Department of Defense, with performance location set at Anniston, Alabama, 36201-4199. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. There is no set-aside designation specified, and the opportunity is open to qualified subcontractors capable of delivering compliant preservation services. All work must align with the established military standard without deviation to ensure compatibility with defense logistics systems and readiness requirements.

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332996
New
DIBBS
Manufacturing of Sediment Strainer Elements (Oil Intake Screen Assembly)The contract involves the fabrication and assembly of 421 military-grade sediment strainer elements designated by NSN 4730-00-287-1938, intended for use in oil intake systems. All units must fully comply with Department of Defense technical standards and quality requirements, ensuring durability and performance under demanding operational conditions. The work is scoped as a subcontract under the NAICS code 332996, with performance required at the specified location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026, under the oversight of the Fluid Handling Division of the Department of Defense. The contract seeks a qualified manufacturer capable of meeting exacting military specifications for filtration components critical to system reliability.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details