Electric Forklift

Amendment 1 - The solictation was updated to upload questions and answers for the requirement. Delivery of Linde E20PL Electric Forklift or equal item; see the description below or the attached characteristics document for a counterpart to be considered an equal item: Dual-motor front-wheel drive for high maneuverability and traction Ergonomically designed workplace for maximum handling performance and a comfortable work-environment Top-mounted tilt cylinders for precise load handling and perfect visibility The vertical mast decoupling concept ensures first-class driving comfort Three adjustable truck-performance modes Long battery life through precise measurement of the actual current and display of the residual capacity wear-free braking when the accelerator pedal is released Four-wheel electric counterbalance forklift with 2.0 t load capacity at 500 mm load center of gravity single-pedal operation with direction lever /reverser for quick and safe direction changes Tires drive axle: Super elastic tires: 200 / 50 - 10 Tires steering axle: Super elastic tires: 16x6-8 Battery: Type 48V, 6PzS, 750Ah Battery Compartment: 180 degree opening door for horizontal battery change Speed control: Limitation of driving speed via switch in the overhead dashboard max speed 12km/h Mast: Triplex Mast, lifting height 4625mm, height 2121mm, free lift 1519mm Fork carrier: fully integrated side shifter, dimensions class 2A, width 980mm, side shift 100mm per side Forks: cross section 100 x 45mm, length 1200mm Fork lowering limiter 30mm to ground Fork Positioner: Type ZVP 20 -A with holder for ISO 2328 forks Load capacity: 2000kg / 500mm LSP Adjustment range: 560 560-1780 mm AK-AK Cabin: 1970mm with roof panel for maximum visibility Meets ISO 6055 with ambient temperatures -20 to + 60 degrees Celsius Windshield made of safety class including washer system and wiper Rear window made of safety class including washer system and wiper Metal doors with side windows Driver seat individually adjustable, adjustable from 50-130kg Dou-sensitive belt retractor integrated into the seat structure Armrest including Operation Control Center Driver seat 10 degrees rotatable Cabin equipment: 1500watt heater with windscreen defroster system, Panoramic rearview mirror, outside rearview mirrors Hydraulic control: Single lever control for lifting and tilting function Single lever control of the auxiliary hydraulic functions Two additional auxiliary hydraulic circuits on the vehicle Two additional auxiliary hydraulic circuits on the lifting mast Two quick release couplings according to ISO7241 12.5 (12L) Depressurization of the auxiliary hydraulics for quick and safe changing of attachments Vehicle illumination: LED front and rear lighting, headlight with driving and parking lights, front and rear direction indicators, rear reflectors with brake lights One rear facing LED working light, including 3 step switch (on/off when reversing Two adjustable LED working lights attached to the lifting mast for an even illumination of the work area Two LED lights bars attached to the back end of the cabin for even illumination of the rear work area. Automatic changeover functionality of LED light bar color, during stand still and driving forward: white at the front and red at the rear, when reversing: red at the front and white at the rear Electric execution: customer specific setting of the vehicle control Cable harness dimensioned in maximum execution Safety: one rear facing - Blue Spot warning device including 3-step switch (on/off/when reversing) Color monitor with 178mm screen size, protection class IP65 Front camera, mounted on the top left of the outer mast Rear camera for the rear area monitoring Battery cable (battery side) with socket MRC 250A Charger: 48V HF on board charger, charging capacity 65A/3KW Voltage 230V (+/- 10%), Efficiency 90%, Protection class IP54 Electrolyte Circulation for fast energy-efficient charging of the battery connection cable for 400V Battery: Typ 48V 6PzS 750Ah, including Aquamatik equipment, MTZ, EUW, cable + plug Trailer Coupling: Automatic trailer coupling type - Rockinger 855B mounted on an adapter plate the rear of the counterweight. Hole pattern: 140x80mm Conversion of the above mentioned Rockinger coupling to a manually operated NATO hook coupling type - 231 Type 31Q Conversion of the front camera from the - mast outside position to - below fork carriage position Installation / Mounting of NATO hook coupling - 231 - Type 31Q on special carrier for - Quick change- device SWV 25 Accessories: Quick-change base frame device type SWV 25 with mechanical locking base frame for attachment onto original fork carriage of above-mentioned Forklift Standard carrier for SWV 25 For attachment onto quick-change base frame, executed for mechanical locking, to carry the below fork positioner ZVP 20-A Special carrier for type SWV 25, fore attachment onto base frame, executed for mechanical locking, the mount is supplied with hole suitable to attach a NATO hook coupling - 231 - Type 31C Notice to Offeror(s)/Supplier(s): Funds are not presently available for this effort. No award will be made under this solicitation until funds are available. The Government reserves the right to cancel this solicitation, either before or after the closing date. In the event the Government cancels this solicitation, the Government has no obligation to reimburse an offeror for any costs."