Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electrical Backshell and Cable Clamp Adapter Supply

Open

Federal

Response Deadline11/16/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract with the DLA Weapons Support Active Devices Division involves the manufacture or procurement of 19 finished electrical backshells and cable clamp adapters, specifically NSN 5935-01-252-8179 components. All deliverables must adhere to the DLA Master List of Technical and Quality Requirements and follow RQ017 marking standards. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331 sampling plans, and the use of additive manufacturing is strictly prohibited. The project falls under NAICS code 332710 and will be performed in New Cumberland. The solicitation was posted on November 6, 2026, with a response deadline of November 16, 2026. This contract supports prime contractors delivering essential hardware to the Department of Defense.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

NAICS

332710 - Machine Shops

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M5-27-T-2370.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BACKSHELL, ELECTRICA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 6

subcontract

Response DeadlineNov 16

Submission deadline

Response Deadline

11/16/2026, 12:00:00 PM ESTin 10 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies electrical backshells and cable clamp adapters for prime contractors delivering DLA Weapons Support contracts. Manufactures or procures NSN 5935-01-252-8179 components per the DLA Master List of Technical and Quality Requirements and RQ017 marking standards. Performs quality assurance via MIL-STD-1916 or ASQ H1331 sampling plans. Prohibits additive manufacturing. Delivers 19 finished hardware units.

Similar Contracts

Same NAICS industry code

Sign Post Hardware and Accessory Supply

Planning and Public Works

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Access Covers (NSN 5340014090972)This subcontract involves the manufacture and supply of 377 specialized access covers for prime contractors working on Department of Defense projects under the DLA Weapons Support Land Supply Chain. The fabrication must strictly adhere to Drawing NR 19207 12273848 and 19207 12273849, Revision D, utilizing precision metal fabrication equipment. Performance will take place in New Cumberland, Pennsylvania. The contractor is required to maintain strict regulatory compliance, including MIL-STD-129 for marking and DFARS 252.223-7008 regarding the use of hexavalent chromium. Additionally, the provider must meet DFARS 252.204-7012 cybersecurity standards to ensure the protection of sensitive information. The project falls under NAICS code 332710.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Supply of Straight Tube-to-Boss Adapters

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Switch Actuator ArmsThis subcontract involves the manufacture and supply of 50 Switch Actuator Arms, identified as NSN 5930-01-353-5281, for the DLA Weapons Support Nuclear Reactor Program. Classified as a Critical Application Item, the components must be fabricated without the use of additive manufacturing and must strictly adhere to NAVSEA 5100-003D regulations prohibiting the intentional addition of mercury. The project requires strict compliance with military standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Performance for this contract will take place in New Cumberland, Pennsylvania, under NAICS code 332710.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

Precision Machined Knob FabricationThis subcontract involves the precision fabrication of 107 units of Knob NSN 5355-01-191-0559 for the DLA Weapons Support Land Supply Chain. The project requires the use of precision machining equipment to ensure all components meet military specifications as outlined in the DLA Master List of Technical and Quality Requirements RA001. Performance will take place at Tinker AFB. The contractor is responsible for the full production cycle, including manufacturing, quality control sampling per MIL-STD-1916 or ASQ H1331, and final packaging and labeling in compliance with MIL-STD-129 and ASTM D3951. The final deliverable consists of 107 finished knobs meeting all specified technical and quality standards.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Machine Key Manufacturing and Supply (NSN 5315-008-995273)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Machining and Assembly of Latch Assembly (NSN 5342-01-212-4901)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Precision Fabrication of Mounting Plates (NSN 5340-01-671-7109)This subcontract involves the precision fabrication of two mounting plates for the DLA Weapons Support Land Supply Chain, specifically adhering to NSN 5340-01-671-7109 standards. The scope of work requires precision machining and forming, with a strict prohibition on the use of additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332710. To qualify and execute the contract, the provider must hold JCP certification for technical data access and maintain strict compliance with ITAR, EAR, and NIST SP 800-171 regulations. Interested parties must respond by November 16, 2026, to ensure all finished plates meet the required technical specifications for the prime contractors.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Access Covers (NSN 5340-01-365-4395)

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

about 3 hours ago

DEADLINE

Metal Tube Assembly Fabrication and SupplyThis subcontract involves the fabrication and supply of 16 metal tube assemblies for prime contractors supporting the Department of Defense, specifically the DLA Weapons Support Fluid Handling Division. The contractor is responsible for machining and assembly in accordance with the DLA Master List of Technical and Quality Requirements and specific technical drawings, with performance taking place in New Cumberland. The project mandates strict adherence to ASTM D3951 for packaging and MIL-STD-129 for marking. Additionally, the provider must maintain cybersecurity compliance as outlined in NIST SP 800-171. The final deliverable consists of 16 completed, packaged, and marked metal tube assemblies.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Quick Release Pin Manufacturing and SupplyThis subcontract through the Department of Defense and the DLA Weapons Support ASC Commodities Division involves the manufacture and supply of 81 quick release pins. The contractor is responsible for sourcing or producing the pins in strict accordance with NSN 5315012685687, with performance taking place in New Cumberland. Compliance with rigorous military standards is mandatory, specifically requiring packaging per MIL-STD-2073-1E and RP001, and marking per MIL-STD-129. Additionally, the successful provider must maintain an active SAM registration to fulfill the requirements of this agreement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Fluid Flow Restrictor Alteration and Orifice MachiningThis subcontract involves the precision alteration of CRES fluid flow restrictors for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The scope of work requires the machining of Holo-Krome P/N 52080 components through precision drilling to meet specific tolerances outlined in the Navy altered item drawing for Valve Orifices. The project entails the delivery of 431 units that strictly adhere to Navy specifications. To be eligible for this performance, contractors must maintain US/Canada Joint Certification Program certification and ensure CMMC Level 2 compliance. The work is categorized under NAICS code 332710 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

Same awarding agency

Fixed Electrolytic Capacitor SupplyThis subcontract involves the supply of 98 fixed electrolytic capacitors, identified by NSN 5910-01-648-4656, to support prime contractors for the DLA Weapons Support Active Devices Division. The manufacturer is required to produce and mark the units in accordance with IPC/JEDEC J-STD-609 and MIL-STD-1285 standards, ensuring that all date and production lot codes are clearly included. All units must be preserved and packaged according to MIL-DTL-39028 and MIL-STD-2073-1E, with shipping markings adhering to MIL-STD-129. The final delivery of the hardware is to be made to the DLA Distribution DDSP New Cumberland Facility in New Cumberland.

Electronic Capacitor Manufacturing

POSTED

about 3 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract involves providing military-grade packaging, marking, and palletization services for electronic components, specifically resistors, to support the DLA Weapons Support Active Devices Division. The contractor is responsible for ensuring all deliverables are shipping-ready and fully compliant with strict military standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. These tasks require the use of specialized MIL-SPEC materials and equipment to meet Department of Defense requirements. The final products are to be delivered to the Aviation Support Detachment located in Fort Worth, Texas. This opportunity falls under NAICS code 488510 and is managed through the DLA Weapons Support Active Devices Division. Interested parties should note the response deadline of November 12, 2026.

Freight Transportation Arrangement

POSTED

about 3 hours ago

DEADLINE

Fixed Film Resistor Supplier (NSN 5905-01-449-5302)This subcontract involves the manufacture and supply of five fixed film resistors, identified by NSN 5905-01-449-5302, for prime contractors working on projects for the DLA Weapons Support Active Devices Division. The components must strictly adhere to MIL-PRF-55182/5N(1) and MIL-PRF-55182K(1) SUP 1 specifications, with lead finish markings compliant with IPC/JEDEC J-STD-609. Eligible suppliers must maintain a QPL or QML listing and ensure full compliance with restrictions regarding ozone-depleting chemicals. The performance of this contract is centered in Fort Worth, Texas, with a response deadline set for November 12, 2026.

Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

Resistor Assembly Supply (P/N 783049 & 784572K01)This subcontract involves the supply of eight high-precision resistor assemblies, specifically part numbers 783049 and 784572K01, for prime contractors supporting the DLA Weapons Support Active Devices Division. All manufactured or sourced components must strictly adhere to MIL-DTL-39032 standards. To ensure the integrity of these sensitive devices, the contractor is required to implement specialized ESD-safe packaging in accordance with MIL-STD-2073-1, Method of Preservation Code GX. The project falls under NAICS code 334419 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. Interested parties must note the response deadline of November 16, 2026, following the posting date of November 6, 2026.

Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Electrical Connector Inserts (NSN 5935-01-466-7042)This subcontract involves the manufacture and supply of 65 electrical connector inserts identified by NSN 5935-01-466-7042 for prime contractors supporting the Defense Logistics Agency Weapons Support Active Devices Division. The contractor is responsible for ensuring all items meet strict technical specifications and providing necessary safety documentation, including Safety Data Sheets in compliance with 29 CFR 1910.1200(g) and Federal Standard No. 313. The project falls under NAICS code 335911 and is managed by the Department of Defense. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on November 6, 2026, with a response deadline set for November 16, 2026.

Storage Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Electrical Plug Connectors (NSN 5935-01-273-3468)

Other Electronic Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

Circuit Breaker Component SupplierThis subcontract involves the supply of ten specialized circuit breaker units under NSN 5925015260726 to support prime contractors for the DLA Weapons Support Active Devices Division. The supplier is required to ensure all items are marked according to MIL-STD-129 standards to meet Department of Defense specifications. Logistics are managed via First Destination Transportation, with the supplier delivering the components to government-arranged transport. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 335311.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Critical Application Connector AdaptersThis subcontract involves the manufacture and supply of 90 specialized connector adapters for the Department of Defense, specifically under the DLA Weapons Support Active Devices Division. The contractor is responsible for producing Part Piece Number M55339/17-00001, ensuring strict adherence to MIL-PRF-55339/17B(2) and NSN 5935-01-296-2900. The work requires the use of precision machining and assembly equipment to meet rigorous military performance specifications for critical application items. The project is categorized under NAICS code 333244 and will be performed at Tinker AFB. Interested parties must note the posted date of November 6, 2026, with a response deadline set for November 16, 2026.

Printing Machinery and Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Electrical Connector Supply (NSN 5935-0162-07724)This subcontract involves the manufacture or procurement of 5,000 specialized electrical connectors meeting NSN 5935-0162-07724 specifications for the Department of Defense. Supporting the DLA Weapons Support Active Devices Division, the contractor is responsible for delivering components that adhere to strict military standards, including MIL-DTL-55330 for preservation, MIL-STD-129 for marking, MIL-STD-2073-1E for packaging data, and RP001 for palletization. The project falls under NAICS code 334417 and will be performed in New Cumberland. Interested parties must respond by November 16, 2026, to provide the required units as specified in the solicitation posted on November 6, 2026.

Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

Voltage Sensitive Resistor (Varistor) SupplierThis subcontract opportunity with the Department of Defense, specifically the DLA Weapons Support Active Devices Division, seeks a supplier for voltage sensitive resistors, also known as varistors. The contractor is responsible for sourcing part number 7019026009 and delivering four units to New Cumberland. Compliance with strict military standards is mandatory, including packaging per MIL-STD-2073-1E and RP001, and marking according to MIL-STD-129 and IPC/JEDEC J-STD-609. Eligible bidders must possess a valid UEI and CAGE code. The solicitation falls under NAICS code 334415 and requires responses by November 16, 2026. This role serves as a supplier to prime contractors managing DLA supply contracts.

Electronic Resistor Manufacturing

POSTED

about 3 hours ago

DEADLINE

Supply of Electrical Connector Backshells (Glenair)This subcontract involves the procurement of 3,000 specialized electrical connector backshells, specifically Glenair part number 447HS325XW1306B matching NSN 5935-01-615-1454. The materials are intended for prime contractors serving the Department of Defense DLA Weapons Support Active Devices Division and must be delivered FOB Destination to the DLA Distribution DDSP New Cumberland Facility. The agreement requires strict adherence to DFARS 252.225-7001 Buy American regulations and NIST SP 800-171 cybersecurity standards. Classified under NAICS code 334220, the contract was posted on November 6, 2026, with a response deadline of November 16, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Jack Box Enclosure Fabrication

Sheet Metal Work Manufacturing

POSTED

about 3 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Manifold Component and Seal Supply

DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Bearing Half, Sleeve (NSN 3120-01-587-6944)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Fluid Valve Stem Manufacturing

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

Manufacture and Supply of Fluid Passage (Banjo) Bolt

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Fabrication of Manual Control Levers (NSN 3040-17-115-2911)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

Fabrication of Access Covers (P/N 287509)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

Quick Release Pin Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Type II Socket Head Cap Screw Manufacturing (NICUAL GR-500)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Manufacture of Plain Rod End Bearings

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Sediment Strainer Final Machining and Assembly

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 3 hours ago

DEADLINE

Pressure Gage (Dial Indicating) Supply

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Machining of Filler Pieces

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS