Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electrical Cable Testing

Open

Federal

Response Deadline01/14/2027, 05:00:00 PM CST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity involves providing specialized electrical cable testing services for prime contractors on FAA airport projects located at George Bush Intercontinental Airport. The scope of work requires the testing of power, control, and coaxial cables to verify operational integrity in accordance with Division 16, Section 16G. The selected contractor must utilize certified cable testing equipment and provide formal certified cable test reports upon completion. Managed by the Department of Transportation under the 697DCK Regional Acquisitions Services, this project is designated as a total Small Business Set Aside under NAICS code 541380. The solicitation was posted on November 9, 2026, with a response deadline of January 14, 2027. Performance will take place in the 77032 zip code area.

General Info

Agency

Department Of Transportation → 697DCK Regional Acquisitions Svcs

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TX, 77032, USA

Set-Aside

SBA

Documents

This scope was carved out of 697DCK-27-R-00033.

The full solicitation package (11 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Road Paving IAH (Houston Bush) Airport

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineJan 14

Submission deadline

Response Deadline

01/14/2027, 05:00:00 PM CSTin 2 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Transportation → 697DCK Regional Acquisitions Svcs

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs specialized testing of installed electrical systems for prime contractors on FAA airport projects at George Bush Intercontinental Airport. Tests power, control, and coaxial cables to ensure operational integrity per Division 16, Section 16G. Utilizes certified cable testing equipment. Delivers certified cable test reports.

Similar Contracts

Same NAICS industry code

Concrete Testing and InspectionThis subcontract for Concrete Testing and Inspection involves providing independent testing and inspection services for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work includes conducting design mixture reviews, verifying curing methods, and performing field tests for slump, air content, and strength. All field sampling and compression testing must be executed in accordance with ACI and ASTM standards to ensure structural integrity. The selected provider is responsible for delivering comprehensive certified testing reports and detailed inspection documentation. This opportunity falls under NAICS code 541380 and is associated with the state of California. Interested parties should note the solicitation timeline and the requirement for strict adherence to industry standards for all concrete quality assurance activities.

California Department of Corrections & Rehabilitation

POSTED

about 9 hours ago

DEADLINE

in about 16 hours

Testing, Adjusting, and Balancing (TAB)This subcontract for Testing, Adjusting, and Balancing (TAB) involves providing independent air balancing and testing services for prime contractors working on municipal projects for the Town of Stratford. The selected provider is responsible for conducting system verification in strict accordance with AABC or NEBB procedures to ensure operational efficiency and compliance. Managed by DAS Procurement for the state of Connecticut, the contract requires the delivery of a certified Air Balancing Report no later than four weeks before the completion of each project. Interested parties must submit their responses by the deadline of December 17, 2026.

DAS Procurement

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Material Testing ServicesThis subcontract for Material Testing Services involves providing field inspection, testing, adjusting, and balancing for prime contractors working on park projects for the Columbus Consolidated Government in Georgia. The scope of work focuses on delivering essential testing laboratory services for soil, concrete, and asphalt to verify that all materials meet project specifications, concluding with the delivery of certified test reports. The opportunity is categorized under NAICS code 541380 and was posted on November 10, 2026. Interested parties must submit their responses by the deadline of December 16, 2026.

Columbus Consolidated Government

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Certified Water Quality Sampling and Laboratory AnalysisThis subcontract for the State of Idaho involves providing certified water quality sampling and laboratory analysis for prime contractors working on Department of Correction facility projects. The scope of work focuses on ensuring drinking water safety through bacteriological sampling for coliform and chemical analysis for chlorine residuals, all performed in accordance with Idaho DEQ and EPA standards. The selected provider must utilize state-certified laboratory facilities to conduct these tests and deliver official Water Quality Laboratory Reports. This opportunity falls under NAICS code 541380, with a response deadline set for November 24, 2026.

POSTED

about 11 hours ago

DEADLINE

BCL27*393919-Wisconsin State Profiicency Test-QM

Solicitation # SRC0000037638

The solicitation BCL27*393919 for the Wisconsin State Proficiency Test-QM is issued by the Clinical Laboratory Services agency in Alabama. This procurement is managed through the Alabama Buys portal, with a response deadline of November 18, 2026. The contract has an estimated value not to exceed $25,000 and allows for annual renewals for a total period of up to five years from the effective date. Performance is based in Alabama, and the State of Alabama maintains the right to inspect all products under the Universal Commerce Code before acceptance, noting that a delivery signature does not constitute final acceptance. Suppliers must adhere to strict legal and administrative requirements, including certification of non-collusion, registration with the Alabama Secretary of State for out-of-state entities, and compliance with the Beason-Hammon Act regarding the employment of unauthorized aliens. Enrollment in the E-Verify program is mandatory for suppliers with employees in Alabama. Additionally, contracts exceeding $25,000 require a Disclosure Statement filed pursuant to the Code of Alabama. Payment is handled electronically via state-issued credit cards, P-cards, or EFT, and all bids must include certification of registration and remittance of Alabama state and local sales, use, and lease taxes.

Clinical Laboratory Services

POSTED

about 11 hours ago

DEADLINE

RFP-2026-ENG-159

Solicitation # 49523

Solicitation RFP-2026-ENG-159 is a request for proposals issued by the Louisiana CPPJ Purchasing agency for emergency traffic control device monitoring and inspection services. This SLED organization project falls under NAICS code 541380 and requires performance within the state of Louisiana. Interested parties must submit their responses by the deadline of December 8, 2026, at 9:00 PM. Further details and submission guidelines can be accessed through the provided Bid Express portal using solicitation number 49523.

CPPJ Purchasing - Commodities / Services

POSTED

about 11 hours ago

DEADLINE

Geological and Integrity LoggingThis subcontract for Geological and Integrity Logging supports prime contractors on orphan well projects managed by the Ohio Department of Natural Resources. The scope of work involves performing comprehensive borehole logging, which includes loading holes with freshwater and utilizing specialized tools and software to run Gamma Ray, CCL, Temperature, Bond, and Caliper logs. These processes are essential for verifying geological formations, casing depth, cement bond quality, and hole diameter. The contractor is responsible for delivering detailed logging reports and data used to determine final cement plug depths. This opportunity falls under NAICS code 541380 and is associated with the Ohio Department of Natural Resources Oil and Gas division. Interested parties must submit their responses by the deadline of December 3, 2026.

Dnr900200 Oil And Gas Dnrfra

POSTED

about 12 hours ago

DEADLINE

V&V and Factory Acceptance Testing (FAT)This subcontract for BC Rapid Transit (Skytrain) involves the development and execution of comprehensive testing programs for prime contractors. The scope of work focuses on performing qualification test programs, Factory Acceptance Tests, and vehicle integration methodology. These tasks require the use of specialized railway electrical test equipment and EMC testing chambers to ensure all systems meet BCRTC acceptance criteria and established EMC standards. The successful contractor is responsible for delivering critical documentation, including qualification test reports, FAT certificates, and a detailed compliance matrix. This project is managed under the Province of British Columbia with a response deadline of December 1, 2026. Performance of the contract will take place within Canada under NAICS code 541380.

BC Rapid Transit (Skytrain)

POSTED

about 13 hours ago

DEADLINE

Aerospace Quality Assurance & TestingThis subcontract for Aerospace Quality Assurance and Testing supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing independent inspection and verification, specifically executing origin inspection and acceptance in accordance with FAR 52.246-2. The contractor is responsible for verifying critical and major attributes using NIST-calibrated measurement and test equipment per RT001, employing sampling methods aligned with MIL-STD-1916 or ASQ H1331. Final deliverables include detailed inspection reports and Certificates of Conformance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Cherry Point. The opportunity is categorized under NAICS code 541380. Interested parties should note the response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

First Article Testing and Quality Validation ServicesThis subcontract for First Article Testing and Quality Validation Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized testing and validation, specifically executing First Article Tests on five units in accordance with MIL-F-16377/26 Table 1 and Section 4.3. The contractor is responsible for coordinating in-plant verification with DSMC-QAR and utilizing MIL-STD-1916 or ASQ H1331 sampling methods. The project requires the use of industrial testing equipment to ensure all military specifications are verified. Final deliverables include a comprehensive FAT Certification report and five validated test units. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing specialized testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on conducting First Article Testing on five units and Production Lot Testing using metrology equipment to ensure compliance with the specifications outlined in drawing 19200 5009271. The selected provider will be responsible for coordinating with Government Quality Assurance Representatives and delivering all necessary FAT reports and PLT results. The project is categorized under NAICS code 541380 and will be performed in Anniston, Alabama. Interested parties should note the response deadline of November 17, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Third-Party Quality Assurance and Zero-Based Sampling InspectionThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing third-party quality assurance and zero-based sampling inspection services. The contractor is responsible for performing independent inspection and acceptance testing for prime contractors to verify dimensional accuracy and material integrity against NAS specifications. Technical execution requires the use of CMM and certified calibration tools to ensure compliance with MIL-STD-130N and ASTM D3951, while following sampling plans per MIL-STD-1916 or ASQ H1331. The project is located in New Cumberland, Pennsylvania, and falls under NAICS code 541380. To be eligible, the provider must maintain ISO 17025 certification and is required to deliver detailed inspection reports and Certificates of Conformance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Transportation → 697DCK Regional Acquisitions Svcs

Same awarding agency

Market Survey: Manufacturing and Delivery of modular, transportable building units or shipping containers to Key West, Florida.

Solicitation # 697DCK-27-R-KWEST

Prefabricated Metal Building and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

UAS BROAD AGENCY ANNOUNCEMENT Solicitation Number: 697DCK-25-R-00278 Call 002-2027

Solicitation # 697DCK-25-R-00278

Solicitation 697DCK-25-R-00278 is a Broad Agency Announcement issued by the Federal Aviation Administration Unmanned Aircraft Systems Integration Office to support the demonstration and validation of systems and technologies for the safe integration of Unmanned Aircraft Systems and Advanced Air Mobility into the National Airspace System. Open through September 30, 2028, the program has a cumulative funding cap of 24 million dollars. The procurement utilizes a two-step process where commercial entities first submit a whitepaper, followed by a potential Request for Proposal. All projects must be conducted in partnership with one of the FAA designated UAS Test Sites, requiring a signed Letter of Attestation from the site director. The resulting awards are cost-reimbursement contracts with no fee, featuring a mandatory 1:1 minimum cost-share requirement, meaning the FAA will fund no more than 50 percent of the total project cost. Performance typically lasts approximately one year and requires deliverables such as safety risk assessments, flight test plans, and technical reports. While Call 001-2026 and Call 001a-2026 have been closed with awards granted to various industry partners and academic institutions, Call 002-2027 is active with anticipated awards of 6 million dollars. For this current call, technical questions are due by December 4, 2026, and whitepapers must be submitted by December 18, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

about 18 hours ago

DEADLINE

in almost 2 years

Electrical Infrastructure and Cable InstallationThis small business set-aside subcontract, managed by the Department of Transportation through 697DCK Regional Acquisitions Svcs, involves the installation of critical electrical infrastructure for prime contractors at George Bush Intercontinental Airport. The scope of work focuses on FAA airport projects and requires the installation of 600V power cables, armored cables, control cables, and PAPI systems. Technical execution includes cable pulling, termination, and the delivery of a fully grounded electrical system utilizing #16 AWG copper conductors in strict adherence to Division 16 specifications. The project falls under NAICS code 238990 and is located in zip code 77032. Interested parties must note the response deadline of January 14, 2027. This opportunity is specifically designated as a Total Small Business Set Aside, ensuring that the infrastructure improvements for the airport's electrical systems are handled by qualified small business entities.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Miscellaneous Metals and CarpentryThis subcontract opportunity, managed by the Department of Transportation's Regional Acquisitions Services, involves the supply and installation of miscellaneous metals and rough carpentry for FAA airport projects at George Bush Intercontinental Airport. The scope of work requires the installation of metal components according to Division 5 and wooden structures per Division 6, with a strict requirement to comply with the Buy American Preference for steel. The project is designated as a total Small Business Set Aside under NAICS code 238190. Interested parties must submit their responses by January 14, 2027, for work to be performed in the 77032 zip code area.

Other Foundation, Structure, and Building Exterior Contractors

POSTED

DEADLINE

Concrete Formwork and PlacementThis subcontract opportunity involves providing specialized concrete services for prime contractors on FAA airport projects located at George Bush Intercontinental Airport. The scope of work includes the installation of concrete formwork, placement of reinforcement rebar, and the pouring of cast-in-place concrete for various road elements in accordance with Division 3 standards. The final deliverables consist of fully cured concrete structures and curbs. Managed by the Department of Transportation through 697DCK Regional Acquisitions Svcs, this project is designated as a total Small Business Set Aside under NAICS code 238110. Qualified candidates must possess Form Setter Paving and Curb certifications to be eligible. The response deadline for this opportunity is January 14, 2027.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Topsoil and Grass CoverThis subcontract opportunity, managed by the Department of Transportation's Regional Acquisitions Services, involves performing final site stabilization for prime contractors at George Bush Intercontinental Airport. The selected contractor will be responsible for applying topsoil and installing grass cover through seeding or sodding in accordance with Division 2, Section 2D. All work must strictly adhere to local environmental regulations and FAA landscaping standards to ensure the delivery of fully stabilized vegetated areas. This project is designated as a total Small Business Set Aside under NAICS code 561730. The performance of the work will take place in zip code 77032. Interested parties should note that the solicitation was posted on November 9, 2026, with a response deadline set for January 14, 2027.

Landscaping Services

POSTED

DEADLINE

Crushed Aggregate Road and SurfacingThis subcontract opportunity, managed by the Department of Transportation's Regional Acquisitions Services, involves the supply and installation of crushed aggregate for road bases and site surfacing at George Bush Intercontinental Airport. The selected contractor will support prime contractors on FAA airport projects by spreading and compacting materials using rollers and graders in accordance with Division 2, Section 2B. All delivered materials must strictly adhere to ASTM specifications to ensure the quality and durability of the completed road bases and surfaces. This project is designated as a total Small Business Set Aside under NAICS code 238990. The solicitation was posted on November 9, 2026, with a response deadline of January 14, 2027. Performance will take place within the 77032 zip code area.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Earthwork and Site ImprovementsThis subcontract for Earthwork and Site Improvements involves performing bulk earthwork, grading, and site preparation for prime contractors at George Bush Intercontinental Airport. The scope of work includes excavation, rough grading, and fine grading in accordance with Division 2, Section 2A, utilizing heavy machinery such as excavators, motor graders, crawl tractors, and loaders to deliver a prepared subgrade. All operations must strictly adhere to FAA airport safety protocols, specifically regarding the immediate removal of debris. Managed by the Department of Transportation through 697DCK Regional Acquisitions Svcs, this opportunity is designated as a total Small Business Set Aside under NAICS code 238910. The project is located in zip code 77032, with a response deadline set for January 14, 2027.

Site Preparation Contractors

POSTED

DEADLINE

Road Paving IAH (Houston Bush) Airport

Solicitation # 697DCK-27-R-00033

The Federal Aviation Administration (FAA) is soliciting bids for the construction of access roads for the 8R Midfield RVR and 15L RO RVR at George Bush Intercontinental Airport in Houston, Texas. This project, identified by solicitation number 697DCK-27-R-00033, has an estimated start date of August 2, 2027. The scope of work involves road paving and earthwork that must comply with ASTM specifications, local codes, and OSHA requirements. Key technical requirements include specific packaging and marking for cables, such as thermal wrapping and gopher-resistant shielding, and a strict mandate for the immediate removal of debris from airport runways and taxiways to ensure operational safety. This is a two-tiered solicitation with a primary preference for SBA-certified small businesses. If sufficient competition is not found within the first tier, the FAA will open the process to full and open competition. Award will be granted to the responsive and responsible offeror providing the lowest total price. The contract requires performance and payment bonds, adherence to union prevailing wage rates, and compliance with the Buy American Preference for steel and manufactured goods. Additionally, the contractor must maintain necessary insurance and follow strict security protocols regarding sensitive unclassified information and government security clearances. All offers must be submitted electronically to the designated point of contact by January 14, 2027.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Design Renovation, System Support Center (SSC), 3551 Combine St., Paso Robles, CA

Solicitation # 697DCK-27-R-00022A

The Federal Aviation Administration is seeking engineering design services for the renovation of a 4,992 square foot leased building to be used as a System Support Center located at 3551 Combine St., Paso Robles, California. The selected contractor will be responsible for developing permit-ready Mechanical, Electrical, Plumbing, Life Safety, and Fire Protection drawings based on provided Design Intent Drawings. Key deliverables include three full-size stamped drawing sets approved by the City of Paso Robles, a dedicated life safety sheet, and all necessary hydraulic and electrical load calculations. All work must comply with 2022 California Building Codes and local standards. This procurement is a Total Small Business Set-Aside, with the award intended for the lowest priced, responsible offeror based on a best-value determination. The period of performance is 130 days from the issuance of the Notice to Proceed. Interested offerors must be registered in the System for Award Management and provide past performance information for at least three relevant projects completed within the last five years. Following several amendments to answer vendor questions and extend deadlines, the final offer due date is November 30, 2026. Submissions must be emailed to the designated point of contact in PDF or Word format, ensuring the solicitation number is included in the subject line.

Engineering Services

POSTED

DEADLINE

Printer Consumables for the Strategic Sourcing for the Acquisition of Various Supplies and Equipment (SAVES) Program

Solicitation # 697DCK-25-R-00368

The Federal Aviation Administration is seeking a single-award, indefinite delivery indefinite quantity (IDIQ) contract for the procurement of over 750 toner and printer consumable items to support the agency-wide Strategic Sourcing for the Acquisition of Various Equipment and Supplies (SAVES) program. This total small business set-aside under NAICS 325992 has a five-year period of performance from February 19, 2027, to February 18, 2032, consisting of one base year and four one-year ordering periods. The contract requires the provision of Original Equipment Manufacturer (OEM) products from approved brands, including Brother, Canon, Dell, Epson, HP, Lexmark, Okidata, and Xerox, with deliveries spanning the 48 contiguous states, the District of Columbia, and non-foreign OCONUS locations. Award will be made to the responsible offeror with the Lowest Priced, Technically Acceptable (LPTA) proposal. Technical acceptability is based on a sequential review of the two lowest-priced compliant proposals, evaluating factors such as logistics plans that ensure a 98 percent on-time delivery rate and a customer service response time of two business hours for 90 percent of requests. Pricing is evaluated based on the total value of the base and all ordering periods, utilizing a model of MSRPs adjusted by proposed annual escalation rates and percentage discounts per brand. Following several modifications, Amendment 0005 extended the proposal due date to November 12, 2026, at 5:00 PM ET and required all offerors to resubmit their proposals in their entirety. Key updates in the final amendment include a reduction in the past experience complexity requirement from 730 to 620 items and the removal of the small business certification submission requirement, as status is now verified via SAM.gov. Proposals must be submitted in three volumes: a Business Proposal, a Technical Proposal with a 12-page limit, and a Price Proposal.

Photographic Film, Paper, Plate, Chemical, and Copy Toner Manufacturing

POSTED

DEADLINE

Market Survey for Helicopter Services for the FAA between Juneau and other Sites in Alaska

Solicitation # 697DCK-27-R-00039

The Federal Aviation Administration is conducting a market survey to identify qualified sources capable of providing air charter transportation services between Juneau and various locations in southeast Alaska. Under NAICS code 481211, the selected contractor will be responsible for providing all necessary labor, supplies, equipment, transportation, and permits to execute these services. This survey is being used for planning purposes to determine if the final contract should be set aside for small or disadvantaged businesses or opened for full competition. Interested vendors must submit their company details, business size status, and verification of active SAM.gov registration to Angela Furukawa by November 30, 2026, at 4:00 PM Pacific Time. Participation in this survey is voluntary and does not guarantee future business, nor will the FAA reimburse vendors for any costs associated with their submissions. The scope of work remains subject to change prior to the official solicitation date.

Nonscheduled Chartered Passenger Air Transportation

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Valve Pressure and Performance Testing

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

WHS Condition Assessment and Load Testing

Fleet Readiness Center

POSTED

DEADLINE

in about 1 month

Metallurgical Testing and Certification Services

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Aerospace Component Inspection and Certification

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

NDT Inspection and Quality Certification Services

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Material Testing and Certification Services

DLA Maritime - Portsmouth

POSTED

DEADLINE

Native Seed Quality Testing

Csa Southwest 3 Usda-Fs

POSTED

DEADLINE

Aerospace Component Qualification and Testing

FA8203 Afsc Pzaab

POSTED

DEADLINE

Radiographic Testing and Certification for Special Emphasis Material

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Liner Integrity Testing and QA

W071 Endist Seattle

POSTED

DEADLINE

PEC Airborne and Surface Particle Sampling and Testing

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

F103--D AND D LABORATORY STEAM & WATER TESTING

Solicitation # 36C24627Q0096

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS