Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Component Manufacturing (Electrical Caps)

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the manufacture and supply of electrical caps identified by NSN 5999011415705, requiring full compliance with both military and commercial standards. The products must meet all applicable technical specifications, including proper packaging, labeling, and adherence to hazardous materials regulations to ensure safe handling and transportation. Delivery is expected to support the Department of Defense’s Maritime Supply Chain, with performance obligations tied to operational readiness and logistical requirements. The subcontract is open for proposals with a response deadline of August 6, 2026, and falls under NAICS code 334416 for other electronic component manufacturing. Interested parties must submit offerings through the DIBBS platform prior to the deadline to be considered for award.

General Info

Manufacture and supply of NSN 5999011415705 electrical caps meeting military and commercial standards for DoD maritime supply chain by August 6, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334416 - Capacitor, Resistor, Coil, Transformer, and Other Inductor ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of electrical caps (NSN: 5999011415705) compliant with military and commercial standards, including packaging, labeling, and hazardous materials regulations.

Similar Contracts

Same NAICS industry code

Power Autotransformer Manufacturing and AssemblyThe contract solicits the full manufacturing, assembly, and testing of military-spec power autotransformers identified by NSN 5950000335669, encompassing all critical processes including core winding, insulation application, enclosure fabrication, and terminal integration to meet stringent defense standards. This subcontract is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision, ensuring participation is limited to eligible small business concerns as defined by FAR 19.5, and is classified under NAICS code 334416 for electrical equipment manufacturing. The work must be performed to comply with military specifications without exception, requiring precise adherence to quality, durability, and performance benchmarks for operational use in demanding environments. The opportunity was posted on July 22, 2026, with a firm deadline for responses on August 6, 2026, and is managed by the Maritime Supply Chain organization under the Department of Defense. While specific location details for performance or point of contact are not provided, the contract is accessible through the official DIBBS platform via the provided link, and all bids must originate from qualified small businesses capable of end-to-end production as outlined. No additional set-asides or preferences are indicated beyond the small business requirement, and the contract places full responsibility on the contractor to deliver fully tested, compliant units meeting all technical and regulatory criteria mandated for military deployment.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Supply of Repair Parts (Electronics/Components)The contract entails the supply of electronic repair parts under CLINs 2B094 and 0YM16, with a total of 67 units required, all subject to stringent military packaging and traceability standards to ensure readiness and compliance across defense operations. The items are critical components used in maintaining electronic systems within military equipment, and delivery must adhere to exacting specifications governing labeling, containment, and documentation to support end-to-end accountability. The solicitation is issued as a subcontract under the Department of Defense’s Maritime Supply Chain, with the North American Industry Classification System code 334416 indicating alignment with semiconductor and other electronic component manufacturing. Responses are due by August 6, 2026, and bidders must be prepared to meet the full scope of contractual obligations, including quality assurance, timely delivery, and full compliance with defense logistics requirements. The opportunity is accessible through the DIBBS portal, and all participants are expected to operate within the framework of federal procurement regulations governing defense subcontracting.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Supplier of Fixed Plastic Dielectric Capacitors (NSN 5910012635162)The contract calls for the supply of military-specification fixed plastic dielectric capacitors identified by NSN 5910012635162, requiring full traceability and strict adherence to anti-counterfeit standards to ensure authenticity and reliability in defense applications. All components must meet MIL-PRF-125 certification requirements, ensuring compatibility with high-reliability military systems. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, designated under FAR 19.5, and falls under NAICS code 334416, which pertains to the manufacturing of electronic components. The offeror must respond by the deadline of August 6, 2026, with the opportunity posted on July 22, 2026, and administered by the Department of Defense through the Maritime Supply Chain organization. The performance location and point of contact details are not specified, but sourcing is governed through the DLA BSM portal for official submission and inquiry.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

Fixed Capacitor Manufacturing and SupplyThe contract calls for the manufacture and supply of PLA-type fixed capacitors that must fully comply with military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling, and J-STD-609 for soldering requirements. All products are to be delivered FOB Origin, with a strict delivery timeline of no more than 98 days from contract award. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The North American Industry Classification System code is 334416, specifically for electronic component and product manufacturing. The contracting organization is the Department of Defense through the Maritime Supply Chain office, and while no specific place of performance or point of contact is listed, responses must be submitted by the deadline of August 6, 2026, with the solicitation posted on July 22, 2026.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

RESISTOR, FIXED, WIRE WOThis contract is an indefinite-delivery contract for the procurement of fixed wire-wound inductive resistors with NSN 5905-01-050-8165, issued under solicitation SPE7M1-26-U-4623 by the Department of Defense’s Maritime Supply Chain. The estimated annual quantity is 46 units, with a guaranteed minimum of six units and a total contract ceiling of $350,000. Delivery is required within 200 days of award, with FOB Origin terms applying. The item is classified as a critical application component and must comply with the DLA Master List of Technical and Quality Requirements, including specific clauses for removing government identification from non-accepted supplies and ensuring physical identification of bare items. Mercury and mercury-containing compounds are strictly prohibited in manufacturing or direct contact with the product, except for narrowly defined functional uses such as batteries, fluorescent lamps, sensors, weapon systems, and specified chemical reagents, with additional containment requirements for portable devices containing mercury. Packaging must follow MIL-STD-2073-1E with clean/dry preservation method 41, no preservation materials, and unit packaging coded as U, while marking must adhere to MIL-STD-129 with special code ZZ. Each unit package must be marked according to IPC/JEDEC J-STD-609 to identify lead content, with placement specified in the standard. The contract mandates adherence to cybersecurity standards including DFARS 252.204-7012, and compliance with FAR clauses covering trafficking in persons, employment eligibility, sustainable products, hazardous materials, and safeguarding covered information systems. Invoicing must be conducted electronically via WAWF, and acceptance occurs at the delivery point with government responsibility for inspection. Offerors must be registered with a UEI and CAGE code, disclose small business status or socioeconomic certifications, and affirm compliance with telecommunications equipment restrictions. The contract requires electronic submission through DIBBS by the August 6, 2026 deadline, with no paper submissions permitted.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

RESISTOR, VARIABLE, WThe contract pertains to the procurement of 34 variable wire wound precision resistors with NSN 5905-01-040-4003, under solicitation SPE7M1-26-U-4558, issued by the Department of Defense through the Maritime Supply Chain organization. Delivery is required within 104 days of award, with responses due by August 6, 2026. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Department of Commerce. Compliance with DFARS 252.225-7048 is mandatory, and distribution is limited to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The contractor must also adhere to DLA packaging requirements for procurement and maintain CMMC Level 2 certification as a certified third-party assessment organization, while handling covered defense information in accordance with applicable policy.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

HOLDER, RESISTORThe contract pertains to the procurement of a HOLDER, RESISTOR with NSN 5905-00-703-0861 and part number 9893953G002, supplied by AMETEK INC under solicitation SPE7M1-26-U-4526. A total of 29 units are required at a unit price of $29.00, with delivery set for 62 days from the contract award, FOB origin, and no variance allowed in quantity. Inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with DLA packaging requirements per RP001 and MIL-STD-2073-1E, including specific preservative methods, wrapping materials, and packaging codes. All markings must conform to MIL-STD-129 with no special marking codes required, and palletization must follow DLA standards. Each unit pack must include lead-free or lead-containing component markings per IPC/JEDEC J-STD-609, with placement adhering strictly to the standard’s guidelines. The acquisition is a total small business set-aside under NAICS code 334416, with technical and quality requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date. The point of contact is Bryan Fair at the Department of Defense’s Maritime Supply Chain office.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

RESISTOR, VARIABLE, NThe contract solicitation seeks 96 variable resistors with part number 5905-01-126-7772 under solicitation SPE7M1-26-U-4555, with a delivery requirement of 350 days after award. Technical specifications are incomplete but must be fully satisfied alongside the referenced part number requirements, and all supplies must comply with DLA’s Master List of Technical and Quality Requirements, including specific control numbers such as RA001, RQ001, RQ002, RQ009, RQ011, and RQ017, which mandate adherence to packaging, inspection at origin, configuration change management, and bare item marking standards. The item is subject to export control under ITAR or EAR, prohibiting any disclosure or transfer of technical data to foreign persons without prior authorization from the Department of State or Commerce, and only contractors with approved US/Canada Joint Certification Program certification, completed DLA export control training, and formal authorization are permitted to access the controlled data. Cybersecurity compliance at CMMC Level 2 is required for third-party assessors, and all documentation must align with Defense Federal Acquisition Regulation Supplement clauses including DFARS 252.225-7048. The solicitation closes on August 6, 2026, and is issued by the Department of Defense’s Maritime Supply Chain under NAICS code 334416 with primary contact Bryan Fair.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

SHIELDING GASKET, ELECTThe contract is for the procurement of 1,261 electronic shielding gaskets with NSN 5999-00-167-1136 under solicitation SPE7M1-26-U-4532, issued as a total small business set-aside with NAICS code 334416. The delivery must be completed within 116 days after order placement, and responses are due by August 6, 2026. The item is subject to stringent DLA packaging and technical requirements, including adherence to the DLA Master List of Technical and Quality Requirements, with specific controls on export-controlled technical data governed by ITAR or EAR regulations. Disclosure of technical data to foreign persons, including employees and subsidiaries, requires prior authorization from the Department of State or Department of Commerce, and only DLA contractors with approved JCP certification, completed DOD export training, and explicit approval may access this data. The contract also mandates removal of government identification from non-accepted supplies, proper physical marking of bare items, and compliance with covered defense information protocols. All requirements are enforced under DFARS 252.225-7048, and the primary point of contact is Bryan Fair of the Department of Defense’s Maritime Supply Chain.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

RESISTOR, VARIABLE, NThis contract is for the procurement of a variable resistor, identified by part number C8909-2-501C and NSN 5905-01-283-7084, under an indefinite delivery contract (IDC) issued by the Department of Defense’s Maritime Supply Chain. The item is designated as a commercial item and classified as a critical application component, with a total estimated quantity of 276 units to be delivered 74 days after award, under FOB Origin terms. The contract imposes strict compliance with military standards for packaging and marking, including MIL-STD-2073-1E for packaging and MIL-STD-129 for shipment labeling, with palletization governed by DLA’s RP001 requirements. Each unit pack must bear lead finish markings per IPC/JEDEC J-STD-609 to identify Pb or Pb-free status, and special marking code ZZ applies for additional requirements. Inspection and acceptance occur at the destination point, with the government responsible for final evaluation. The contract incorporates the DLA Master List of Technical and Quality Requirements, including RQ011 for removal of government identification from non-accepted supplies and RQ017 for physical identification of bare items. The contract falls under the NAICS code 334416 and includes a full suite of FAR and DFARS clauses addressing employment equity, combating human trafficking, cybersecurity safeguarding, hazardous material handling, and whistleblower protections. Prohibitions on hexavalent chromium and unauthorized storage or disposal of toxic materials are enforced, and all hazardous materials must be labeled in accordance with 29 CFR 1910.1200 and MIL-STD-129. Payment must be processed through Wide Area WorkFlow, and invoicing follows standard government electronic protocols. The contract ceiling is set at $350,000 per order, though no unit price is specified for the current line item, preventing precise valuation. Offerors must submit via the DIBBS portal by the deadline of August 6, 2026, and are required to maintain a valid Unique Entity ID and CAGE code. Small business representations, socioeconomic certifications, and disclosures related to covered defense telecommunications equipment are mandated through Section K, and all suppliers must ensure compliance with supply chain integrity and cybersecurity standards, including NIST SP 800-171 assessment requirements. The contracting officer retains full authority to determine contract type

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

TRANSFORMER, RADIO FThe contract pertains to the procurement of a Transformer, Radio F, identified by NSN 5950-01-375-5032 and part number 142330 from QualityDyne Systems Inc, with a quantity of 10 units at a unit price of $10.00, for a total value of $100.00. Delivery is required within 20 days from the award date, FOB origin, with inspection and acceptance occurring at the destination. The item must be packaged per MIL-STD-2073-1E using packaging method 41, dry, with government box wrapping and no cushioning material, packaged in unit containers D3 with intermediate containers EC, and marked in full compliance with MIL-STD-129 without any special marking codes. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise specified, and attributes are to be classified with specified verification levels or AQLs. The DLA Master List of Technical and Quality Requirements governs all technical and quality standards referenced in the contract, with revisions effective as of the solicitation or award date. The product must be shipped by the fastest traceable means, excluding parcel post, to the designated delivery point at Fort Stewart, GA, with the freight and markfor addresses identical to the delivery location. The contract reference number is SPE7M1-26-T-221Z, with a required delivery date of July 20, 2026, and no variance in quantity is permitted. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 334416, and is managed by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency.

MARITIME SUPPLY CHAIN

POSTED

about 14 hours ago

DEADLINE

RESISTOR, FIXED, WIREThe contract is for a single fixed wire resistor with NSN 5905-01-692-5480, under solicitation SPE7M5-26-T-339K, with a response deadline of August 3, 2026, and a required delivery within 20 days of award. The item falls under NAICS code 334416 and is procured by the Department of Defense’s Active Devices Division. Technical and quality requirements are governed by the DLA Master List, with compliance determined by the revision in effect on the solicitation issue date. Packaging must meet DLA standards, and any non-accepted supplies must have government identification removed prior to return. The technical data associated with this item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons, regardless of location, and requiring strict adherence to DFARS 252.225-7048. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and prior authorization from DLA. The point of contact for inquiries is Jeanette Heisey, with performance location listed as FPO, zip 96694-1500.

ACTIVE DEVICES DIVISION

POSTED

about 14 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

FOB Origin Logistics and Shipment CoordinationThe contract pertains to the coordination of freight shipments originating under FOB terms, requiring comprehensive management of logistics for Department of Defense locations. This includes end-to-end oversight of documentation, selection and oversight of carriers, and real-time tracking of deliveries to multiple destinations, ensuring compliance with military supply chain standards. The work involves meticulous planning and execution to meet stringent DoD requirements for delivery accuracy, timing, and recordkeeping across diverse and often remote locations. Subcontracting under NAICS code 488510, this effort is managed by the Maritime Supply Chain division of the Department of Defense, with responses due by August 6, 2026. The scope demands expertise in international and domestic freight logistics, with an emphasis on seamless handoffs between carriers and visibility into shipment status from origin to final military destination. Contractors must demonstrate proven capability in handling sensitive military shipments, maintaining secure and timely communication channels, and adapting to dynamic delivery schedules without disruption to operational readiness.

Freight Transportation Arrangement

POSTED

about 14 hours ago

DEADLINE

Military-Compliant Packaging and PalletizationThe contract requires the packaging, preservation, and palletization of circuit breakers to meet stringent military standards including MIL-STD-129 and RP001, ensuring full compliance with Department of Defense logistics protocols administered by the Maritime Supply Chain under the DLA. All work must align with military specifications for identification, labeling, protective packaging, and unit load configuration to facilitate efficient handling, storage, and transportation within the defense supply chain. The requirement is issued as a subcontract under NAICS code 493190, indicating a focus on warehousing and storage services tailored to defense needs. Responses are due by August 6, 2026, with the solicitation posted on July 22, 2026, through the DIBBS platform. The place of performance and specific agency location details are not provided, but performance is expected to support DLA's broader logistics infrastructure. The subcontractor must demonstrate capability to execute precision packaging under defense-grade standards, including durable preservation techniques to protect sensitive electrical components from environmental degradation during extended storage and transit. Compliance, documentation accuracy, and adherence to military labeling requirements are critical to contract success.

Other Warehousing and Storage

POSTED

about 14 hours ago

DEADLINE

Hazardous Materials Packaging and LabelingThe contract requires specialized packaging and labeling of circuit breakers that contain hazardous materials, ensuring full compliance with OSHA and DFARS regulations. All packaging must include accurate Safety Data Sheets and properly formatted hazard warning labels to meet federal safety and documentation standards. The work is structured as a subcontract under the NAICS code 561990, indicating it falls under other support services, and is issued by the Department of Defense through its Maritime Supply Chain division. Performance of the contracted services is expected to align with defense supply chain requirements, though the specific place of performance is not designated. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, leaving a two-week window for interested parties to submit proposals. There is no set-aside designation specified, meaning the contract is open to all qualified contractors regardless of business size or status. The opportunity is accessible through the DIBBS platform, and while no point of contact is listed, all queries must be directed through the official system. The successful bidder will be responsible for the end-to-end handling of hazardous material packaging, ensuring that each circuit breaker unit is properly identified, documented, and shipped in accordance with all applicable military and occupational safety mandates.

All Other Support Services

POSTED

about 14 hours ago

DEADLINE

Circuit Breaker Manufacturing and SupplyThe contract seeks the manufacture or sourcing of circuit breakers that meet stringent military and federal technical standards, with full compliance required to the DLA Master List and critical application specifications. These components must be engineered for reliability in demanding defense environments, ensuring operational integrity in high-stakes systems. The solicitation is issued as a subcontract under NAICS code 335313, indicating a focus on electrical equipment manufacturing, and is managed by the Department of Defense through the Maritime Supply Chain organization. Responses are due by August 6, 2026, with the opportunity posted on July 22, 2026, providing a limited time window for qualified suppliers to submit proposals. While no specific set-aside preferences or geographic restrictions are outlined, the place of performance remains undefined, suggesting flexibility in logistics as long as compliance and delivery requirements are met. All bidders must demonstrate proven experience with defense-grade electrical components and the capacity to meet exacting quality and documentation standards tied to federal procurement protocols.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 14 hours ago

DEADLINE

Small Business Subcontracting Support (Administrative)The contract seeks administrative support services focused on ensuring small business compliance within the Maritime Supply Chain division of the Department of Defense, specifically for a Total Small Business Set-Aside under FAR 19.5. The work involves managing socioeconomic status reporting and facilitating joint venture disclosures through SAM.gov, requiring accurate and timely documentation to maintain eligibility and compliance for small business contracting opportunities. The effort is classified under NAICS code 541611, indicating services related to management consulting, with a specific emphasis on regulatory adherence and subcontracting transparency. Responses are due by August 6, 2026, and the solicitation is open to small businesses qualifying under the SBA's set-aside criteria, with no specific place of performance or point of contact listed. The contract is administratively oriented, emphasizing data integrity, reporting accuracy, and adherence to federal small business regulations rather than operational or technical deliverables. Interested parties must access the full solicitation details via the provided DIBBS link, as additional requirements may be specified in supporting documentation not included in the public summary.

Administrative Management and General Management Consulting Services

POSTED

about 14 hours ago

DEADLINE

Barcoding and Marking ServicesAll packaging and components must be marked and barcoded in strict compliance with MIL-STD-129 specifications, ensuring uniformity and traceability across the supply chain. If required, Unique Item Identifiers must be applied in accordance with DoD guidelines to support full asset visibility and system integration. The work must be fully compatible with the WAWF system to enable seamless electronic data exchange and logistics tracking. This subcontract is a total small business set-aside under FAR 19.5, designated for small business concerns, and falls under NAICS code 541940. The opportunity was posted on July 22, 2026, with proposals due by August 6, 2026, and is managed by the Maritime Supply Chain division within the Department of Defense.

Veterinary Services

POSTED

about 14 hours ago

DEADLINE

Hazardous Materials Compliance and LabelingThe contract requires the provision of compliant hazard warning labels and Safety Data Sheets for all hazardous materials included in a motor parts kit, strictly adhering to OSHA and Department of Defense regulatory standards. All labeling and documentation must meet federal safety protocols to ensure proper handling, storage, and disposal of hazardous substances throughout the supply chain. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond. The NAICS code 541620 designates it as an environmental consulting and related services category, aligning with the technical and compliance expertise needed. The solicitation was posted on July 22, 2026, with responses due by August 6, 2026, and the overseeing agency is the Department of Defense through its Maritime Supply Chain organization. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS portal.

Environmental Consulting Services

POSTED

about 14 hours ago

DEADLINE

Packaging and Preservation ServicesThe contract requires the provision of dry storage preservation and packaging services for motor parts kits utilizing Method 10 with wrap material JA, fully complying with DLA RP001 and MIL-STD-2073-1E standards. All work must adhere to strict military specifications for long-term preservation and packaging to ensure component integrity during storage and transit. The requirement is issued as a subcontract under a Total Small Business Set-Aside designation, exclusively targeting small business concerns as defined by the SBA, with the NAICS code 312230 indicating classification within the beverage and tobacco product manufacturing sector, though the actual scope pertains to defense logistics and packaging services. The solicitation was posted on July 22, 2026, with a response deadline set for August 6, 2026, and is managed by the Maritime Supply Chain organization under the Department of Defense. The place of performance and specific office address details are not provided, but the work is expected to support U.S. defense logistics needs. Interested parties must respond through the designated DIBBS platform, and the contract does not specify the awarding office contact point, suggesting a standardized procurement process managed centrally. Compliance with technical documentation and preservation standards is mandatory for qualification.

Tobacco Manufacturing

POSTED

about 14 hours ago

DEADLINE

Motor Overhaul Parts Kit SupplyThe contract solicits the supply of a complete overhaul parts kit for motors, designated by NSN 6105005228528, to enable full restoration of motors to operational condition. All components required for a comprehensive rebuild are included, and the parts must adhere to government engineering source approval standards to ensure compatibility, reliability, and performance. This procurement is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, promoting small business participation in defense-related supply chains. The North American Industry Classification System code 335312 identifies the relevant manufacturing sector for electric motor and generator production. The solicitation was posted on July 22, 2026, with a response deadline of August 6, 2026, providing vendors a three-week window to submit proposals. The acquiring organization is the Maritime Supply Chain under the Department of Defense, indicating the motors are intended for naval or maritime applications. While specific delivery location details are not provided, the parts are expected to support maintenance activities within the defense supply chain. Interested parties must access the official solicitation portal via the provided UI link for full requirements, documentation, and submission instructions, and compliance with all federal acquisition regulations is mandatory.

Motor and Generator Manufacturing

POSTED

about 14 hours ago

DEADLINE

Packaging and Marking Compliance ServicesThe contract requires full compliance with MIL-STD-2073-1E and MIL-STD-129 standards for the packaging and marking of capacitor units, including precise barcoding systems and appropriate hazardous materials labeling to meet federal military specifications. All work must be performed under a Small Business Set-Aside classification as defined by the SBA, ensuring eligibility and participation by qualified small businesses. The solicitation falls under NAICS code 541690 and is issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of August 6, 2026, and a posting date of July 22, 2026. The place of performance and point of contact details are not specified, but the contract is accessible through the DIBBS system for further information.

Other Scientific and Technical Consulting Services

POSTED

about 14 hours ago

DEADLINE

Ocean Transportation via U.S.-Flag VesselsThe contract pertains to the ocean transportation of capacitor units via U.S.-flag vessels, ensuring full compliance with the Cargo Preference Act and Maritime Administration regulations. This requirement mandates that all freight be carried on vessels registered under the U.S. flag to support national security and domestic shipping interests, and the transportation must adhere strictly to MARAD guidelines governing cargo preference obligations. The solicitation is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, reinforcing the federal commitment to fostering small business participation in defense-related logistics. The North American Industry Classification System code 483110 identifies the scope as water transportation of cargoes, specifically ocean freight services. The opportunity was posted on July 22, 2026, with responses due by August 6, 2026, and is managed by the Maritime Supply Chain under the Department of Defense. While no specific port or delivery locations are detailed, the performance will involve international ocean transport routes necessary to deliver capacitor units for defense purposes. All participating carriers must maintain active U.S. flag status and demonstrate regulatory compliance throughout the shipping lifecycle, from loading through unloading, with potential audits to verify adherence to Cargo Preference Act requirements.

POSTED

about 14 hours ago

DEADLINE

Fixed Electrolytic Capacitor Manufacturing and SupplyThe contract entails the manufacture and delivery of fixed electrolytic capacitors that have been reverse-engineered to meet the strict technical standards outlined in MIL-T-31000, ensuring full compatibility and performance for defense-grade applications. All delivered units must be accompanied by complete technical documentation, including material certifications, manufacturing processes, and test results, and require formal government approval prior to acceptance. This is a subcontract under a Total Small Business Set-Aside, exclusively available to small business concerns as defined by the SBA, with the NAICS code 334413 indicating classification within the Electronic Component and Product Manufacturing sector. The solicitation is managed by the Maritime Supply Chain under the Department of Defense, with responses due by August 6, 2026, and the performance location remains unspecified but is expected to align with defense logistics requirements. The procurement is part of broader efforts to secure reliable, domestically sourced critical electronic components for military systems.

Semiconductor and Related Device Manufacturing

POSTED

about 14 hours ago

DEADLINE