Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electrical Conductor Furnishing and Pulling

Active

State & Local

Response Deadline11/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Electrical Conductor Furnishing and Pulling involves the supply and installation of aluminum and copper service conductors for underground laterals on AMP utility projects. The scope of work includes pulling approximately 8,082 linear feet of aluminum conductors and 307 linear feet in 3-inch laterals, with specific requirements for voltage-drop mitigation upsizing on any laterals exceeding 100 linear feet. The contractor is responsible for delivering fully installed and tested electrical conductors within underground conduits. Key technical requirements include mandatory torque certification for all connections to ensure installation quality. This project falls under NAICS code 238210 and is managed by the Engineering and Operations agency in California. Interested parties must submit their responses by the deadline of November 25, 2026.

General Info

Agency

California → Engineering and Operations

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of CS 09-26-07.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Underground Utility District 38 Overhead-to-Underground Service Conversions

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 23

subcontract

Response DeadlineNov 25

Submission deadline

Response Deadline

11/25/2026, 05:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Engineering and Operations

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Engineering and Operations

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs aluminum and copper service conductors for underground laterals for prime contractors on AMP utility projects. Pulls approximately 8,082 LF of aluminum conductors and 307 LF in 3-inch laterals, including voltage-drop mitigation upsizing for laterals over 100 LF. Requires torque certification for connections. Delivers installed and tested electrical conductors in underground conduits.

Similar Contracts

Same NAICS industry code

Jim Walters and Port O'Call South Lift Station Improvements - Runaway Bay, TX (Electrical, Fencing, Site Grading)

Solicitation # jim-walters-port-ocall-south-lift-station-improvements-runaway-bay-tx-electrical-fencing-site

Puris Services, LLC is soliciting quotes for the Jim Walters and Port O'Call South Lift Station Improvements project located in Runaway Bay, Texas. This opportunity is specifically set aside for small, minority, women-owned, and labor surplus certified firms. The required scopes of work include electrical services, fencing, and site grading and materials, falling under NAICS codes 238210, 238990, and 238910. Interested parties must submit their quotes by October 30, 2026, with the final bid due date set for November 3, 2026. Ashden Middlebrooks serves as the primary point of contact for all inquiries, plans, and specifications, and can be reached via email at ashden.middlebrooks@puriscorp.com or by phone at 470-503-5624.

Puris Services, LLC

POSTED

about 6 hours ago

DEADLINE

Transformer Oil Testing Services

Solicitation # RFP-VC-26-010

The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and consistency of its transformer maintenance. The scope of work is divided into three primary areas: conducting visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve technician safety, and performing detailed oil testing and analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems to ensure positive pressure is maintained, provide on-site training for up to 20 agency staff members, and develop comprehensive standard operating procedures. All work must adhere to strict technical and safety standards, including ASNT Level 1 certification for thermography, ASTM D923 and D924 for oil sampling, and NFPA 70E safety protocols. The agency intends to make a single award based on the offeror's capability, staffing plan, personnel availability, and cost-effectiveness. Qualified candidates must demonstrate experience with at least one project for a utility or industrial facility and one project combining oil sampling with infrared inspections. Proposals must be submitted electronically via PlanetBids by December 23, 2026, and must include a detailed company profile, project methodology, and required certifications such as a Non-Collusion Statement and Workers Compensation Certificate. The resulting contract will utilize fixed pricing with a not-to-exceed total value and may include one-year extension options. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.

Inland Empire Utilities Agency

POSTED

about 6 hours ago

DEADLINE

in about 2 months

Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility

Solicitation # purified-water-replenishment-san-jacinto-valley-advanced-water-purification-facility-2

Axia Electric LLC is soliciting bids from SBE/DBE certified firms for the Purified Water Replenishment San Jacinto Valley Advanced Water Purification Facility and Brine Ponds project in California for the Eastern Municipal Water District. The requested scopes of work include low voltage systems, fiber optics, and the supply of electrical materials. Interested subcontractors must be registered and qualified to perform public work pursuant to Section 1725.5 of the Labor Code and must agree to abide by the AGC Master Labor Agreements and the terms of the prime contract. Bids must be submitted via email to Ryan Falk by 2:00 PM on November 18, 2026, with a final deadline of November 19, 2026. Evaluation factors include SBE/DBE certification, responsiveness to deadlines, and the disclosure of any lower-tier SBE/DBE participation. Minimum insurance requirements are strict, requiring 1 million dollars for per-occurrence general liability, auto liability, and workers compensation, 2 million dollars for aggregate and completed operations general liability, and 5 million dollars in excess liability. All submitted bids constitute an acceptance of Axia's Standard Long Form Subcontract or Purchase Order.

POSTED

about 6 hours ago

DEADLINE

2026-Nalo-Back-Up Generator Replacement

Solicitation # 2026-nalo-back-generator-replacement

Management and Training Corporation is seeking bids from qualified electrical contractors for a subcontracting opportunity to replace the back-up generator at the Hawaii Job Corps Center in Waimanalo. This project is categorized under NAICS code 238210 and is specifically set aside for various small business designations, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone small businesses. Interested parties must submit their responses by November 3, 2026. The primary point of contact for this solicitation is Karllene Allen, who can be reached via email or phone for further coordination regarding the performance of work in Hawaii.

2026-Nalo-Back-Up Generator Replacement

POSTED

about 6 hours ago

DEADLINE

Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services

Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services

Management and Training Corporation is soliciting bids for a fixed-price, single lump sum contract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves the inspection, repair, and certification of emergency lighting systems to ensure full compliance with NFPA 101 (2024 Edition), NFPA 70 (National Electrical Code), and OSHA safety regulations. The estimated contract value ranges between $25,000 and $100,000. Bids are due by December 1, 2026, and must be submitted via email to Sandra Clore. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. The award will be based on overall best value. Bidders must provide a detailed cost breakout on company letterhead and a bid bond guarantee of 20% for bids equal to or exceeding $25,000. Awarded contractors with bids at or above $25,000 must also provide performance and payment bonds from a surety company with at least an A- rating. The contractor is required to provide durable, uniquely numbered labels for all tested fixtures and deliver two complete operation and maintenance manuals, manufacturer warranties, and a one-year guarantee of workmanship upon substantial completion. Compliance requirements include adherence to the Davis-Bacon Act and Construction Wage Rate Requirements for Idaho, as well as FAR regulations regarding small business self-certification, debarment disclosure for subcontracts over $45,000, and the Buy American Act. Contractors must also comply with federal mandates for paid sick leave and the display of employee rights and wage determination notices. Final payment is contingent upon a joint substantial completion inspection and the resolution of all punch list items.

Management & Training Corporation/Centennial Job Corps Center

POSTED

about 6 hours ago

DEADLINE

in about 1 month

ASO-1489-00 Installation of Distance Measuring Equipment (DME) on runway 15 at the Charleston International Airport in Charlston, SC

Solicitation # aso-1489-00-installation-distance-measuring-equipment-dme-runway-15-charleston-international-airport

This solicitation, identified as ASO-1489-00, involves the construction and installation of Distance Measuring Equipment (DME) collocated with the Runway 15 Localizer at Charleston International Airport in South Carolina. Managed by Parsons, the project falls under NAICS code 238210 and is specifically set aside for various small business categories, including Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. The opportunity was posted on October 24, 2026, with a response deadline set for November 27, 2026. Interested parties should coordinate with the primary point of contact, Quentin Wack, to ensure all submission requirements are met by the closing date.

POSTED

about 6 hours ago

DEADLINE

in about 1 month

AMC-0235 TBD VOR Public Announcement

Solicitation # amc-0235-tbd-vor-public-announcement

This solicitation, issued by PTSI Managed Services Inc. (Parsons), involves a comprehensive construction project located in Louisiana. The scope of work encompasses a variety of facility improvements, including electrical work and grounding system repairs, roofing installation, plumbing replacements, grading, painting, and door repairs. The estimated magnitude of construction for these services is valued between 500,000 and 1,000,000 dollars. The opportunity is designated as an SBA set-aside, specifically open to Small Businesses, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by the deadline of November 16, 2026. The project falls under NAICS code 238210, and primary coordination is handled by Kurtis Kinard.

PTSI Managed Services Inc. (Parsons)

POSTED

about 6 hours ago

DEADLINE

ASO-0728-00 DME Shelter Installation in Shelby, NC

Solicitation # aso-0728-00-dme-shelter-installation-shelby-nc

Parsons Corporation is soliciting bids for the installation of a DME shelter in Shelby, North Carolina. The scope of work includes the installation of a shelter furnished by others, along with a DME antenna, associated foundations, junction box, meter rack, underground conduit, grounding, and conductors. This project falls under NAICS code 238210. The solicitation is open to various small business classifications, including SBA certified Veteran Owned, Service-Disabled Veteran Owned, Women-Owned, and HUBZone Small Businesses. Interested parties must submit their responses by the deadline of December 30, 2026. Primary coordination for this opportunity is handled by Quentin Wack.

Parsons Corporation

POSTED

about 6 hours ago

DEADLINE

Electrical Systems & Lighting MaintenanceThis subcontract for Electrical Systems and Lighting Maintenance involves providing essential maintenance and repair services for electrical plants and lighting systems on Transbay Joint Powers Authority facility projects. The scope of work includes maintaining electrical distribution, replacing lamps, cleaning light fixtures, and repairing electrical systems specifically for trash and recycling compactors to ensure all systems remain fully functional. Qualified bidders must provide a Licensed Electrician and adhere strictly to DIR Prevailing Wage compliance. The solicitation was posted on October 23, 2026, with a response deadline of December 4, 2026. This opportunity falls under NAICS code 238210 and is managed through the California Procurement agency.

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Kitchen Electrical SubcontractorThis subcontract for Muscogee County Schools involves providing specialized electrical installation services for school nutrition projects. The selected subcontractor will be responsible for installing electrical power supplies and connections for prime contractors, specifically delivering energized lines within four feet of equipment. The scope of work includes providing wiring for both 208-volt and 480-volt options. To qualify for this project, the contractor must be a Licensed Master Electrician and ensure all work complies with NEMA standards. The solicitation was posted on October 23, 2026, with a response deadline of November 17, 2026. This opportunity falls under NAICS code 238210 for electrical contracting.

Muscogee County Schools

POSTED

about 14 hours ago

DEADLINE

Electrical Installation ContractorThis subcontract opportunity is for an Electrical Installation Contractor to support prime contractors on Connecticut Department of Energy and Environmental Protection projects. The scope of work involves the removal of existing equipment and the installation of new EV charging stations across four separate locations. Responsibilities include mounting the chargers to surfaces and connecting all necessary supporting utilities to ensure the stations are fully operational. To qualify for this project, the contractor must employ a Connecticut Licensed Master Electrician and ensure all work strictly adheres to the National Electrical Code. Interested parties should note that the response deadline is November 13, 2026, and the project falls under NAICS code 238210.

DAS Procurement

POSTED

about 15 hours ago

DEADLINE

Electric Vehicle Charging Station Upgrades

Solicitation # DEEP102326CM

The Connecticut Department of Energy and Environmental Protection (DEEP) is soliciting bids under solicitation number DEEP102326CM for a consultant to provide review and installation support for upgrading electric vehicle charging stations at four statewide locations. The primary objective is to replace existing units with similar stations that integrate Amp Up wireless software to enable electronic payment processing for electricity used during transactions. The scope of work includes conducting site assessments to document existing equipment and utilities, developing schematic plans for supporting utilities, providing cost and construction timelines, and coordinating system start-up and owner training to ensure full functionality of the public payment capabilities. Bids must be submitted electronically to William Coleman by 2:00pm on November 13, 2026, and must remain valid for 90 days following the closing date. Evaluation by a DEEP representative panel will be based on the contractor's project approach, relevant experience and references, and a detailed breakdown of time and cost. Selected candidates may be required to participate in interviews or presentations. Upon selection, the contractor will negotiate a Purchase Order and Project Agreement to finalize financial terms and responsibilities.

DAS Procurement

POSTED

about 15 hours ago

DEADLINE

More opportunities from California → Engineering and Operations

Same awarding agency

Electrical Component SupplyThis subcontract for Electrical Component Supply involves providing approved electrical hardware and components for prime contractors working on AMP utility projects. The scope of work includes the furnishing of 35 AMP-approved meter adapters, 66 small and large pull or termination boxes, and both aluminum and copper conductors. All supplied materials must adhere to Or Equal specifications and are subject to final approval by the Project Manager. The selected provider is responsible for delivering all electrical components directly to the designated project site or staging area. This opportunity is managed by the Engineering and Operations agency in California under NAICS code 335999, with a response deadline set for November 25, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Underground Conduit and Trenching ServicesThis subcontract for Underground Conduit and Trenching Services involves performing excavation, conduit installation, and restoration for electrical service laterals on AMP utility projects. The scope of work includes trenching, conduit placement, backfilling, and sanding, with a specific requirement to install sheeting, shoring, and bracing for any excavations five feet or deeper in compliance with Labor Code 6707. The contractor is responsible for utilizing appropriate trenching machinery and bedding sand to deliver completed underground conduit paths and fully restored surface areas. Managed by the Engineering and Operations agency in California under NAICS code 238110, the solicitation was posted on October 23, 2026. Interested parties must submit their responses by the deadline of November 25, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Overhead-to-Underground (OH-to-UG) Electrical Service ConversionThis subcontract for Overhead-to-Underground Electrical Service Conversion involves performing physical electrical service conversions for prime contractors on AMP utility projects. The scope of work includes disconnecting overhead services, installing 195 standard conversions, executing weatherhead-to-weatherhead conversions, and performing roof overhang or eave penetrations. All work must utilize AMP-approved meter adapters and pull or termination boxes to deliver fully functional underground service connections. The project is managed by the Engineering and Operations agency in California under NAICS code 238210. Qualified contractors must possess a specialized electrical license and ensure strict compliance with Labor Code 6707 shoring requirements. The solicitation was posted on October 23, 2026, with a response deadline set for November 25, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Underground Utility District 38 Overhead-to-Underground Service Conversions

Solicitation # CS 09-26-07

Alameda Municipal Power (AMP) is soliciting bids for the conversion of overhead electric facilities to underground service within Underground Utility District 38 in Alameda, California. The project focuses on modifying the routing and connection of existing electrical services while retaining existing customer-owned meter sockets and equipment where deemed safe by the City Building Division. The scope includes 195 standard conversions, the installation of over 8,000 linear feet of aluminum service conductors, and the use of approved raceway-intercept methods. The contract is subject to a Project Stabilization Agreement with the Building Construction Trades Council of Alameda County and requires adherence to California Department of Industrial Relations prevailing wage determinations. The contract will be awarded to the lowest responsible bidder, with local preference given to businesses within the City of Alameda. Bidders must provide bid security equal to 10 percent of the maximum bid amount and are required to furnish performance and payment bonds for 100 percent of the contract price. Key deliverables include a baseline schedule submitted within ten days of the Notice to Proceed and a Construction Service Plan for conversion methods. Payment is processed monthly via itemized applications for work performed, with undisputed amounts paid within 30 days. Final acceptance is contingent upon the correction of all punch list items and approval by the Public Utilities Board or the General Manager.

Power and Communication Line and Related Structures Construction

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Utility Material SupplyThis subcontract opportunity, titled Utility Material Supply, is issued by the Engineering and Operations agency in California. The contract involves the manufacture and delivery of specialized materials for prime contractors working on Alameda Municipal Power underground systems projects. Required deliverables include electric and fiber conduits, precast concrete utility boxes, vaults, and traffic-rated lids, all of which must strictly adhere to the AMP Materials and Installation Criteria for Underground Systems. The selected provider will be responsible for transporting these materials directly to designated project sites or contractor yards. Interested parties must submit their responses by the deadline of October 30, 2026. The project falls under NAICS code 327390, focusing on the production of specialized concrete products for utility infrastructure.

Other Concrete Product Manufacturing

POSTED

DEADLINE

Traffic Control and Pedestrian ManagementThis subcontract agreement focuses on the provision of traffic control and pedestrian safety services for prime contractors working on Alameda Municipal Power utility projects within public rights-of-way. The scope of work includes the implementation of traffic control plans, the placement of necessary signage and cones, the provision of certified flagging personnel, and the management of pedestrian detours to ensure safe and compliant work zone operations. The selected provider is responsible for coordinating all required permits and maintaining strict compliance with the City of Alameda traffic regulations. This opportunity is managed by the Engineering and Operations agency in California under NAICS code 561990, with a response deadline set for October 30, 2026.

All Other Support Services

POSTED

DEADLINE

Concrete Equipment Pads and Bollard InstallationThis subcontract agreement involves the supply and installation of concrete equipment pads and protective steel bollards for prime contractors working on Alameda Municipal Power utility projects. The scope of work includes the forming and pouring of concrete and the secure installation of bollards to safeguard utility assets, all of which must be completed in strict accordance with the AMP Materials and Installation Criteria for Underground Systems. Managed by the Engineering and Operations agency in California under NAICS code 238110, the contract requires the delivery of fully cured concrete pads and properly installed protective barriers. The solicitation was posted on October 16, 2026, with a response deadline set for October 30, 2026.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Underground Conduit and Vault InstallationThis subcontract for Underground Conduit and Vault Installation involves the installation, repair, and replacement of underground electrical and fiber optic infrastructure for prime contractors working on Alameda Municipal Power projects. The scope of work includes the installation of electric and fiber conduits, conduit risers, utility boxes, vaults, and traffic-rated lids and covers, with all activities required to adhere to the AMP Materials and Installation Criteria for Underground Systems. The ultimate goal is the delivery of fully installed and verified underground conduit systems and access covers. Managed by the Engineering and Operations agency in California under NAICS code 238990, the opportunity was posted on October 16, 2026. Interested parties must submit their responses by the deadline of October 30, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Utility Excavation and Site RestorationThis subcontract for Utility Excavation and Site Restoration involves providing specialized infrastructure support for prime contractors working on Alameda Municipal Power projects. The scope of work includes trenching for conduit placement, potholing for utility verification, excavation, backfilling, and the compaction of trenches. Additionally, the contractor is responsible for the full restoration of pavement and landscaping to ensure all sites are returned to their original condition. All work must be executed in strict accordance with the City of Alameda requirements and the AMP Materials and Installation Criteria for Underground Systems. The project falls under NAICS code 237990 and is managed by the Engineering and Operations agency. Interested parties must submit their responses by the deadline of October 30, 2026.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Request for Information (RFI) for On-Call Civil Service Construction IFB

Solicitation # CS 10-26-01

Alameda Municipal Power (AMP) is issuing a Request for Information (RFI) to plan for a multi-year, on-call civil construction services arrangement in Alameda, California. The agency intends to establish a pool of up to three qualified contractors to support routine, planned, and emergency utility needs. The scope of work includes trenching, potholing, excavation, backfill, and surface restoration, as well as the installation and repair of underground electric and fiber conduits, conduit risers, utility boxes, vaults, traffic-rated lids, equipment pads, and protective bollards. All work must adhere to City requirements, applicable permits, and AMP's Materials and Installation Criteria for Underground Systems. This RFI is for planning purposes only and does not constitute a solicitation or an offer for a contract award. AMP is considering a five-year contract structure featuring baseline pricing for the first year with annual percentage adjustments for subsequent years. Contractors will be responsible for providing all labor, equipment, materials, and traffic control, while coordinating field activities and inspections with AMP representatives. Work will be issued on an as-needed basis with no guaranteed minimum quantity or dollar amount. Interested parties must submit their responses via the online supplier portal by October 30, 2026, using the provided questionnaire and limiting their response to approximately five pages.

Power and Communication Line and Related Structures Construction

POSTED

DEADLINE

Heavy Electrical Equipment TransportThis subcontract for Heavy Electrical Equipment Transport involves the specialized hauling of sensitive electrical equipment, specifically capacitor banks, for prime contractors working on Alameda Municipal Power projects. The contractor is required to use enclosed trucks to ensure all equipment is properly secured and protected from damage during transit. All deliveries are made F.O.B. Destination to the AMP Service Yard. Logistical requirements dictate that deliveries must occur on weekdays between 0700 and 1500, with a mandatory 48-hour advance notice provided prior to arrival. This opportunity falls under NAICS code 484220 and is managed by the Engineering and Operations agency in California. The response deadline for this solicitation is November 4, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Capacitor Bank Controller SupplierThis subcontract agreement involves the supply of microprocessor-based controllers for prime contractors working on Alameda Municipal Power projects. The specific scope of work requires the delivery of one SEL 734W Capacitor Bank Controller, part number 07340W9F1D1526E9GAD3AMXXX, manufactured by Schweitzer Engineering Laboratories. The procurement is managed by the Engineering and Operations agency in California under NAICS code 334419. The solicitation was posted on October 9, 2026, with a response deadline set for November 4, 2026.

Other Electronic Component Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS