Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Contact Component Supply

Active

Federal

Response Deadline07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of 650 military-spec electrical contact components designated as NSN 5999-01-075-7359 with part number 1001123, all of which must fully comply with DFARS regulations and meet the packaging and labeling standards outlined in MIL-STD-129 and MIL-STD-2073-1E. The components are intended for military use and must be produced to exacting defense specifications to ensure operational reliability and interoperability within DoD systems. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under NAICS code 335931 for other electrical component and accessory manufacturing. The solicitation, issued by the ACTIVE DEVICES DIVISION of the Department of Defense, was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for potential vendors to submit proposals. The contract is not subject to any specific set-aside provisions and is accessible through the DIBBS platform using the provided UI link. While no point of contact is listed, interested parties must ensure full compliance with all technical, regulatory, and logistical requirements to be considered for award, with delivery timelines and quality assurance measures expected to align with standard military procurement protocols.

General Info

Manufacture and supply 650 DFARS-compliant military electrical contacts per MIL-STD specs for DoD use in New Cumberland, PA.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335931 - Current-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 650 military-spec electrical contact components (NSN 5999-01-075-7359, P/N 1001123) compliant with DFARS, MIL-STD-129, and MIL-STD-2073-1E for packaging and labeling.

Similar Contracts

Same NAICS industry code

Precision Wiring Harness ManufacturingThe contract calls for the manufacture of 25 units of a branched military wiring harness with strict requirements for full traceability and compliance with established quality standards. All units must be produced to meet military specifications and delivered to CONUS stock points, ensuring timely and secure placement within the Department of Defense supply chain. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, aligning with FAR 19.5 regulations. The North American Industry Classification System code 335931 identifies the scope as wiring and wiring device manufacturing, underscoring the technical nature of the task. The solicitation was posted on July 25, 2026, with responses due by August 8, 2026, and falls under the ASC Commodities Division of the Department of Defense. The project emphasizes precision, accountability, and adherence to defense logistics protocols without specifying a single point of contact or physical performance location beyond the designated delivery destinations within the continental United States.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

WIRING HARNESS, BRANCHEDThe contract pertains to the procurement of 25 units of a branched wiring harness identified by NSN 5995-01-204-2606, with a delivery schedule of 434 days after contract award. The solicitation is a total small business set-aside under FAR 19.5, issued by the Defense Logistics Agency’s ASC Commodities Division, with a response deadline of August 8, 2026. Compliance with stringent technical and quality standards is mandatory, including adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, and application of MIL-STD-1916 or ASQ H1331 for sampling unless otherwise directed. Critical, major, and minor attributes must be verified with specified levels or AQLs, and unspecified attributes are treated as major with zero non-conformance acceptance criteria. The item is subject to export control regulations under ITAR or EAR, restricting technical data disclosure to foreign persons without prior government authorization, and only contractors with approved JCP certification, completed DLA training, and explicit authorization may access such data. Additional requirements include DLA packaging standards, removal of government identification from rejected items, physical marking of bare items, inspection and acceptance at the manufacturer’s origin, and cybersecurity maturity certification at CMMC Level 2 for third-party assessors. All data and performance are governed under the terms of the solicitation SPE4A6-26-R-XB72.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

ARRESTER, LIGHTNINGThe contract is for the procurement of five lightning arresters with NSN 5920-01-714-7685 under solicitation SPE7M5-26-T-321D, issued by the Department of Defense’s Active Devices Division. Delivery is required within 168 days after receipt of order, with a firm delivery date of January 13, 2027, to the DLA Distribution facility at New Cumberland, Pennsylvania, under FOB Origin terms. The acquisition follows simplified procedures, potentially using a Lowest Price Technically Acceptable (LPTA) award methodology, though no formal evaluation factors, weights, or risk ratings are specified. Pricing is listed as $0.00, indicating incomplete or placeholder data, and no contract value can be determined. Compliance with DLA’s packaging requirements (RP001), MIL-STD-2073-1E for packaging, and MIL-STD-129 for marking—including mandatory barcoding and hazard labeling per 29 CFR 1910.1200—is strictly required. All items must be preserved using the CLNG/DRY method without supplemental materials. Payment and invoicing are required through the Wide Area WorkFlow system, with electronic submission of receiving reports and invoices mandatory. The contract incorporates numerous Federal Acquisition Regulation clauses addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous materials, cybersecurity protections, subcontracting, inspection at destination, default, whistleblower rights, and prohibitions on certain defense telecommunications equipment and hazardous substances like hexavalent chromium. Offerors must provide a Unique Entity Identifier, CAGE Code, and represent their size and socioeconomic status, including disclosures for joint ventures. Specific representations regarding covered defense equipment and data safeguarding are triggered by 252.204-7016 and 252.204-7012, requiring compliance with NIST SP 800-171. The Technical and Quality Requirements are governed by the DLA Master List, with revisions effective on the solicitation issue date controlling simplified acquisitions. Proposals must be submitted exclusively via the DIBBS portal by July 29, 2026, with no physical submissions permitted.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

ARRESTER, LIGHTNINGThe contract solicitation SPE7M5-26-T-319E is for the procurement of seven lightning arresters identified by NSN 5920-01-714-7686 under a simplified acquisition framework managed by the Defense Logistics Agency’s Active Devices Division. Delivery is required at the DLA Distribution DDSP facility in New Cumberland, Pennsylvania, with a 168-day timeline from the date of order and FOB Origin terms, meaning the contractor assumes all shipping costs and risks until the product reaches the designated delivery point. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with preservation requiring cleaning and drying per method code 10 and no special preservation materials. Palletization complies with DLA’s RP001 packaging requirements. The solicitation, posted July 24, 2026, with a response deadline of July 29, 2026, does not include pricing data, and the contract value remains unlisted. Compliance with extensive regulatory and security obligations is mandatory, including adherence to NIST SP 800-171 for cybersecurity protection of controlled unclassified information, mandatory use of U.S.-flag vessels for ocean shipments unless a waived exception is obtained 45 days in advance, and strict labeling and documentation requirements for hazardous materials under OSHA’s Hazard Communication Standard. The contract incorporates multiple DFARS and FAR clauses addressing substitution of parts, inspection at destination, default, accelerated payments to small business subcontractors, prohibition of hexavalent chromium, avoidance of communist Chinese military company supplies, and electronic invoicing through WAWF. Offerors must provide UEIs and CAGE codes, disclose socioeconomic status, and complete representations regarding covered defense telecommunications equipment. Deviations are acknowledged for several clauses, including NIST controls, subcontracting for commercial items, and changes, indicating tailored compliance expectations. No evaluation factors or award methodology are explicitly defined, but the use of a simplified acquisition and absence of trade-off provisions suggest a likely LPTA approach. All submissions must be electronic via the DIBBS portal, with no physical submissions permitted.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONTACT, ELECTRICALThis contract pertains to the procurement of electrical contact components identified by NSN 5999-01-075-7359 and part number 1001123, with a total quantity of 650 units split across two line items: 295 units at $295.00 each and 355 units at $355.00 each, totaling $193,625. Delivery is required within 164 days from the contract award, with FOB origin terms applying. All items must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The contract prohibits the intentional inclusion of mercury or mercury-containing compounds in the supplied hardware except for specific exempted applications such as batteries, fluorescent lights, and certain instruments as defined by NAVSEA, with additional safety requirements for portable devices containing mercury. Packaging and shipping must adhere to IP025 regulations for hazardous materials, and all shipments must be directed to two designated DLA distribution centers in New Cumberland, PA, and Barstow, CA. Inspection and acceptance occur at the destination, with zero variance allowed in quantities. The solicitation number is SPE7M5-26-T-326J, issued under full and open competition, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document, with compliance tied to the version in effect on the solicitation or award date depending on acquisition type. The unit of issue is each (EA), aligning with DoD standards, and all shipments must meet the required need ship date of January 5, 2027, with an original required delivery date of December 9, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CABLE ASSEMBLY, SPECThe contract is a Request for Quotations issued by the Defense Logistics Agency’s Aviation Commodity Division for three units of a cable assembly identified by NSN 5995-01-694-7835, with delivery required within 295 days after receipt of order, targeting a ship date of May 16, 2027. The item is designated as a critical application component and must conform to drawing revision C dated December 30, 2012, with part number UA-2476 and technical documentation revision TDP Rev A Gen 1. The solicitation incorporates technical and quality requirements from the DLA Master List of Technical and Quality Requirements, with specific provisions for physical identification, packaging, and marking in accordance with MIL-STD-2073-1E and MIL-STD-129, including mandatory use of QUP 001, packaging method 10, and unit container E5. Packaging and marking must also avoid mercury or mercury-containing compounds except in approved exceptions such as batteries, fluorescent lights, and certain NAVSEA-specified instruments, which must include a second containment boundary if portable. Inspection and acceptance occur at origin with sampling governed by MIL-STD-1916 or ASQ H1331 Table 1, requiring zero non-conformances for acceptance unless otherwise specified; quality systems must meet SAE AS9003 or ISO 9001 tailored to AS9003. The contract mandates compliance with export control regulations under ITAR or EAR, restricting access to technical data to offerors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and DLA approval. Participation requires submission of a Safety Data Sheet and representation in SAM confirming small business status and compliance with the Buy American Act and Berry Amendment. Electronic invoicing through WAWF is mandatory, with fast pay not applicable. Cybersecurity requirements include CMMC Level 2 certification for third-party assessors and full compliance with FAR clauses 252.204-7012 and 252.240-7997 for safeguarding covered defense information and NIST SP 800-171 adherence. Offers must be submitted via DIBBS by July 24, 2026, and the contract is not a small business set-aside, though HUBZone price evaluation preferences are available

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Input and Output Power Cabling SupplyThe contract is for the supply of WH-15 input and WOA-80M AC output cables to be integrated with the UFC-180H frequency converter system. It is a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to compete, and the North American Industry Classification System code is 335931, which corresponds to other electrical equipment and component manufacturing. The opportunity was posted on July 24, 2026, with a response deadline of August 17, 2026, at 6:00 PM. Performance is required at Cape May Ch, New Jersey, with a zip code of 08641. The contract falls under the Department of Defense and is managed by the FA4484 87 Cons Pk office. All submissions must meet technical specifications for compatibility with the UFC-180H system and adhere to the set-aside requirements for small business participation.

FA4484 87 Cons Pk

POSTED

DEADLINE

59--CONNECTOR,RECEPTACLThe U.S. Navy’s NAVSUP Weapon Systems Support in Philadelphia plans to award a sole-source contract to The Boeing Company for two units of a connector, receptacle part identified by NSN 0Q-5935-017222756-SX and part number D0090557-201, with delivery term FOB origin. This part is exclusively manufactured by the original equipment manufacturer, and the government holds no data or intellectual property rights that would allow procurement from alternative sources, making The Boeing Company the only viable supplier under 10 U.S.C. 2304(c)(1) and FAR 6.302. The acquisition is categorized under NAICS 335931 and PSC 500, with a contract duration of one year, subject to UID requirements and Buy American provisions. The procurement will follow FAR Part 15 procedures and will not utilize commercial item acquisition policies under FAR Part 12. All interested parties may submit capability statements within 45 days of the notice, but no competition is anticipated, and the government will not delay the process to consider new source approvals. The request for proposal is scheduled for release on July 24, 2026, with proposals due by August 24, 2026, and an anticipated award on September 24, 2026. The solicitation will be posted electronically via NECO, with no hard copies or phone inquiries accepted. All submissions must be directed via email to Deja Thompson-Mitchell.

Navsup Weapon Systems Support

POSTED

DEADLINE

59--CONNECTOR,ELECTRICThis contract governs the procurement of a specialized electrical connector assembly for critical shipboard use, designated as SPECIAL EMPHASIS material due to the high risk of failure that could result in loss of life, ship systems, or the vessel itself. The contractor must manufacture the assembly in strict compliance with Naval Sea Systems Command Drawing 7349938, MIL-DTL-24231, and other referenced specifications, with stringent requirements for material traceability, chemical and mechanical certification, and non-destructive testing. All components must be traceable from raw material through final assembly via unique heat-lot markings, and certifications must be 100% verified, positive, and unqualified, with no disclaimers permitted. Certain parts, including hull penetrators and receptacle bodies made from QQ-N-286 alloy, require specific heat treatments, chemical analysis, and destructive testing to validate compliance, with testing restricted to approved laboratories for slow strain rate tensile tests. The contract mandates comprehensive First Article Testing, both contractor-performed and government-performed, with the contractor required to submit one cable specimen for destructive testing and one complete assembly to Portsmouth Naval Shipyard for government evaluation. Quality assurance is rigorously enforced under ISO-9001, with full Government inspection at source and mandatory submission of documented quality procedures, welding qualifications, and test reports via the ECDS system. All welds, brazing, and material modifications require prior approval, and repairs on QQ-N-286 material are strictly prohibited. The contractor must maintain full configuration control, submit Engineering Change Proposals for any modifications, and comply with Buy American and Defense Priorities and Allocations System (DPAS) requirements, as this is a DO-rated order for national defense use. Delivery of all material must be completed within 365 days of contract award, with certification data submitted 20 days prior to each delivery, and the entire product line is subject to zero-defect acceptance criteria during final inspection.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

IEM/MMM TACTICL EHFThis contract pertains to the procurement of specialized hull-penetrating assemblies for critical naval shipboard systems, where failure could result in catastrophic loss of life, vessel, or mission-critical capabilities. All materials, particularly those made from QQ-N-286 and SAE AMS 5666, must meet exacting chemical and mechanical specifications, with mandatory traceability from raw material through final assembly via unique heat-lot markings. Every component requires comprehensive certification including tensile, hardness, hydrostatic pressure, electrical, and ultrasonic testing, with results documented in Objective Quality Evidence (OQE) reports that must be electronically signed and traceable to individual items. The delivery schedule mandates submission of certification data at least 20 days prior to shipment, with final delivery due within 365 days of contract initiation. All materials are designated as SPECIAL EMPHASIS Level I, requiring 100% inspection of traceability, certifications, and test records, with zero-defect acceptance criteria for lot inspection. The contractor must maintain ISO-9001 or MIL-I-45208 quality systems, with documented procedures for welding, brazing, and material handling, and must submit all weld procedures and qualifications for Navy approval prior to production. Repair welding is prohibited on QQ-N-286, and thread lubricants containing molybdenum disulfide are strictly forbidden, with A-A-59004 anti-galling compound required instead. All certification documentation must be submitted via the Wide Area Work Flow (WAWF) system to Portsmouth Naval Shipyard using DODAAC N50286, with notification sent to PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL, and no shipment is permitted without formal acceptance. The contract is issued under Emergency Acquisition Flexibilities and is rated DO under the Defense Priorities and Allocations System, requiring strict adherence to Buy American and small business subcontracting requirements. Configuration control is tightly enforced, with any deviation or waiver requiring formal review and approval by the Contracting Officer, and all engineering changes must be submitted as Class I or II ECPs with full-life cycle impact analysis. Government source inspection is required at all production sites, including subcontractors, and all subcontracted work must carry forward the full quality and traceability requirements. Electronic signatures are accepted in place of handwritten ones, provided they are secured, auditable, and controlled per strict standards, and all foreign certifications must include US unit conversions signed by an authorized representative.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

LA IEM TACTICAL EHFThis contract pertains to the procurement of a Hull Penetrating Assembly designated as SPECIAL EMPHASIS material (Level I, Quality Assured) for use in a critical shipboard system, where failure could result in catastrophic consequences including loss of life or the vessel itself. The material must strictly comply with LaBarge Inc. drawing 7-21740 and associated specifications, with detailed requirements for chemical and mechanical properties, particularly for components made from QQ-N-286 material and SAE AMS 5666 bar stock. Certification of all critical materials, welds, and tests is mandatory, including tensile, hardness, hydrostatic, electrical, and ultrasonic inspections, with results traceable to unique heat lot numbers and permanently marked on each component. All test and certification data must be submitted electronically via Wide Area Work Flow (WAWF) to Portsmouth Naval Shipyard prior to shipment, with inspection and acceptance authority vested in N39040 and shipping directed to N50286. The contract mandates 100% inspection of traceability, certification documents, and nondestructive test results, and enforces zero defect tolerance during final lot acceptance. A comprehensive quality assurance regime is established, requiring the contractor to maintain an ISO-9001 or MIL-I-45208 compliant quality system, with calibration standards aligned to ISO-10012 or ANSI-Z540.3 and ISO/IEC 17025. Government Quality Assurance representatives retain full rights to inspect at source, including subcontractor facilities, and all sub-tier suppliers must adhere to the same traceability, certification, and documentation standards. Welding and brazing procedures require formal approval prior to execution, and repair welding on QQ-N-286 is prohibited; all weld filler metals must be certified and traceable. Electronic signatures are accepted on certifications provided they are uniquely tied to authorized individuals and documents cannot be altered post-signature. The contractor must ensure material traceability from raw stock through all manufacturing and subcontracting steps, with strict segregation, marking, and documentation controls. Mercury and molybdenum disulfide are prohibited, and anti-galling compound A-A-59004 must be used for threads. The contract is issued under Emergency Acquisition Flexibilities, holds a “DO” priority rating under the Defense Priorities and Allocations System, and is subject toBuy American and Small Business Subcontracting Plan requirements, with all deviations or waivers requiring

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

POWER SUPPLYThis contract pertains to the repair of a POWER SUPPLY under a fixed-price arrangement, with all work required to meet strict technical and quality standards defined by military specifications. The contractor must perform teardown and evaluation of received carcasses within 90 days and submit a firm-fixed price quote that includes all associated costs such as handling damaged or incomplete units, missing hardware, repair labor, and CAV reporting. The repair must adhere to approved contractor procedures, drawings, and technical orders tied to the specified CAGE code 0KPC5 and reference number CCHA41186-1. Items must be marked in accordance with MIL-STD-130 Rev N and packaged per MIL-STD-2073. Any design, material, or part number changes require prior written approval from the contracting officer and must be classified under one of six defined code categories. The award is subject to Defense Priorities and Allocations System (DPAS) certification and is issued under Emergency Acquisition Flexibilities. The contract mandates full compliance with Buy American provisions, cybersecurity maturity model requirements, and small business set-aside conditions, with the offeror required to provide a small business subcontracting plan. Electronic submission and acceptance of proposals are binding upon receipt, and non-original equipment manufacturers must submit authorization letters from the OEM. All inspection records must be maintained for 365 days post-delivery. The point of contact for inquiries is James E. Lewis, reachable via email and phone, with responses due by August 10, 2026. The requirement is administered by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, PA, under solicitation number N0010426QND66, and all contractual documents are deemed officially issued upon electronic transmission. The repair price must reflect estimated costs for the entire repair effort, including new part cost for evaluation, and any deviations from solicitation requirements must be explicitly stated; otherwise, the award will strictly follow the stated terms.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Military Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation of electrical components in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet military-grade durability, handling, and storage requirements. This includes applying barcoding and data matrix labeling for accurate inventory tracking and implementing mandatory military destination markings to facilitate secure and efficient logistics throughout the defense supply chain. All work must be conducted to guarantee full compliance with federal specifications for long-term preservation, environmental protection, and identification of sensitive defense equipment. The solicitation is issued as a subcontract under the NAICS code 561990, with a response deadline of July 29, 2026, and the place of performance is designated as New Cumberland, PA, with zip code 17070-5002. The contracting activity is managed by the ACTIVE DEVICES DIVISION within the Department of Defense, indicating the work supports critical defense infrastructure and supply chain needs. Subcontractors must be prepared to meet stringent documentation, labeling, and delivery protocols aligned with military logistics systems, with no set-aside details provided, suggesting the opportunity is open to all qualifying entities.

All Other Support Services

POSTED

DEADLINE

Cybersecurity & CDI Safeguarding ComplianceThis contract requires the implementation and assessment of NIST SP 800-171 security controls to safeguard Covered Defense Information, ensuring compliance with Department of Defense cybersecurity standards. The work involves documenting system configurations, policies, and procedures that support the protection of CDI, as well as establishing processes for timely cyber incident reporting in accordance with DFARS clause requirements. All activities must be performed at the designated place of performance in New Cumberland, Pennsylvania, under the oversight of the Active Devices Division within the Department of Defense. The subcontract is solicited under NAICS code 541512 for computer systems design services, with a firm response deadline of July 29, 2026. Submission must demonstrate capability to meet NIST 800-171 control requirements and maintain ongoing compliance through accurate documentation and responsive incident handling. Performance will be evaluated based on adherence to federal cybersecurity frameworks and the ability to operationalize and validate control implementation without delay or deviation from mandated protocols.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation of hazard warning labels and Safety Data Sheets for electrical components that contain hazardous materials, ensuring full compliance with the Defense Federal Acquisition Regulation Supplement clause 252.223-7001 and the Occupational Safety and Health Administration’s Hazard Communication Standard. All deliverables must be accurate, complete, and aligned with federal regulations governing the communication of chemical hazards to ensure safety across the defense supply chain. The work is expected to be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This is a subcontract opportunity under NAICS code 541690, which classifies it within other scientific and technical consulting services. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with no set-aside designated for small businesses or other categories. The contracting activity is under the Active Devices Division of the Department of Defense, and all work must be executed to meet stringent federal military and workplace safety standards without deviation.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Sustainable and Environmentally Compliant Product SupplyThe contract requires the supply of electrical connectors that meet stringent federal sustainability standards, ensuring all materials and manufacturing processes are environmentally compliant. The work must align with the Department of Defense’s goals for reducing environmental impact, particularly through the use of non-hazardous substances, recyclable components, and energy-efficient production methods. This is a subcontract under NAICS code 325998, with performance required at the facility in New Cumberland, Pennsylvania, 17070-5002. All proposals must be submitted by August 7, 2026, and the solicitation was posted on July 24, 2026, indicating an extended evaluation window typical for complex technical compliance procurements. The contracting activity is led by the Active Devices Division, underscoring the critical nature of these components in defense systems. Suppliers must demonstrate proven capability in delivering products that satisfy both functional performance requirements and evolving environmental regulations without compromising reliability or lifecycle durability.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Physical Item Marking and Identification ServicesThe contract requires permanent physical marking of electrical connectors to ensure traceability and adherence to military standards, even after the items are removed from their original packaging. This work must be performed to meet stringent defense requirements for identification, durability, and compliance, with the marking techniques and materials selected to withstand harsh environmental conditions and extended service life. The effort is critical for logistics, maintenance, and readiness within defense operations, where unboxed components must remain identifiable throughout their lifecycle. This is a subcontract under the NAICS code 339999 for other miscellaneous manufacturing, issued by the Active Devices Division of the Department of Defense. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026. The contract does not specify a set-aside type, and all interested parties must respond through the designated DIBBS platform link to be considered.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract requires the commercial and military-compliant packaging, labeling, and palletization of electrical connectors in full alignment with DLA and federal standards, ensuring all materials meet rigorous defense supply chain requirements. The work must be executed to maintain traceability, durability, and regulatory compliance throughout handling and transit, with specific adherence to applicable military specifications for packaging integrity and label accuracy. Performance is designated for New Cumberland, PA, with the place of performance clearly established under the federal procurement framework. This is a subcontract opportunity under NAICS code 423830, issued by the Active Devices Division within the Department of Defense, with a response deadline of August 7, 2026. All proposals must demonstrate capability to fulfill the exacting packaging and labeling protocols mandated for defense-grade electrical components, emphasizing precision in documentation, unit consolidation, and pallet configuration. The solicitation is open to qualified subcontractors with proven experience in military-compliant logistics operations, and all submissions must be submitted via the DIBBS platform prior to the stated deadline.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Electrical Connector Manufacturing – Qualified Product (QPL)The contract seeks the manufacture and delivery of military-spec electrical plug connectors identified by NSN 5935-01-369-5686, requiring full compliance with Qualified Product List (QPL) standards and the MIL-DTL-83723H specification. These connectors must meet stringent military performance, durability, and environmental requirements for use in defense applications, ensuring interoperability and reliability across critical systems. The work is to be performed under a subcontract arrangement with place of performance specified as New Cumberland, Pennsylvania, 17070-5002, and is managed by the Active Devices Division within the Department of Defense. All responses must be submitted by August 7, 2026, with the solicitation issued under NAICS code 334417 for Other Electronic Component Manufacturing. The contract is not subject to any set-aside designation and is open to qualified manufacturers capable of delivering products that have been validated on the QPL. Prospective bidders must ensure adherence to all technical, quality, and delivery requirements outlined in the military specification, with successful performance essential to sustaining defense supply chain integrity. The opportunity is accessible through the DIBBS platform via the provided link.

Electronic Connector Manufacturing

POSTED

DEADLINE

Transportation and FOB-Origin Delivery LogisticsThe contract obligates the contractor to arrange a FOB-origin shipment of a packaged amplifier to a designated Department of Defense destination, ensuring full compliance with WAWF-receiving reporting standards. All logistics must be executed from the point of origin, placing responsibility on the supplier to coordinate transportation, documentation, and delivery procedures that align with federal logistics protocols. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the final delivery point or receiving hub under DLA oversight. The solicitation is structured as a subcontract under NAICS code 488999, which covers other transportation support activities, and is managed by the Active Devices Division within the Department of Defense. The posting date is July 24, 2026, with responses due by July 29, 2026, establishing a tight five-day window for proposal submissions. The contract requires meticulous adherence to defense logistics systems, particularly WAWF, for accurate and timely receipt confirmation, emphasizing accountability and traceability throughout the supply chain process from origin to final delivery.

All Other Support Activities for Transportation

POSTED

DEADLINE

Hazard Communication and Safety Labeling ComplianceThe contract requires the development and submission of hazard warning labels and safety data sheets (SDS) for hazardous materials used in products or packaging, ensuring full compliance with OSHA and military safety regulations. All documentation must adhere to standardized formats and content requirements to accurately communicate chemical hazards, handling procedures, and emergency measures to end users and responders. The work is part of a subcontract under the Department of Defense’s Active Devices Division, with performance focused at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the North American Industry Classification System code 541690 indicating it falls under other scientific and technical consulting services. The procurement is not set aside for any specific small business category, and the place of performance is designated to ensure alignment with military logistics and safety protocols. Contractors must deliver precise, compliant documentation that supports operational safety standards across defense-related supply chains.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

ESD-Safe and MIL-STD-Compliant Packaging and LabelingThe contract requires the provision of ESD-protected packaging and military-compliant labeling for electronic amplifiers, ensuring all components are safeguarded against electrostatic discharge during handling and transport. The packaging must meet industry standards for static control while also adhering to military specifications for durability, environmental resilience, and traceability. Each unit must be properly preserved to prevent corrosion or degradation during storage and transit, with specific attention to maintaining performance integrity under demanding conditions. The labeling must include a 2D barcode that complies with military requirements for data accuracy and machine readability, enabling seamless inventory management and logistics tracking throughout the defense supply chain. The work is designated as a subcontract under the NAICS code 561910, and performance is required at a facility in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026. The contracting entity is the Active Devices Division within the Department of Defense, and the focus is on delivering compliant packaging and labeling solutions aligned with defense logistics standards. Although no set-aside information is specified, the requirement is time-sensitive and targets specialized capabilities in military-grade packaging and identification systems.

Packaging and Labeling Services

POSTED

DEADLINE

High-Reliability Electronic Amplifier ManufacturingThe contract mandates the manufacture of a high-reliability electronic control amplifier to military specifications, encompassing full lifecycle development from design through final testing, with strict adherence to defense-grade standards for traceability and quality assurance. The scope requires end-to-end production capabilities, including component sourcing, assembly, functional verification, and documentation compliant with Department of Defense requirements, ensuring the product meets mission-critical performance thresholds under harsh operational conditions. Performance is anchored at New Cumberland, Pennsylvania, with a tight submission window closing on July 29, 2026, following a July 24, 2026 posting. This is a subcontract opportunity under NAICS code 334418, classified under the Active Devices Division of the Department of Defense, targeting qualified suppliers capable of handling sensitive defense electronics manufacturing. The work demands full compliance with military standards for documentation, lot tracking, and test validation, with no set-aside designation specified, leaving the opportunity open to eligible contractors with demonstrated expertise in secure, high-reliability electronic systems.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Cybersecurity Compliance Support (NIST SP 800-171)The contract supports a prime contractor in achieving compliance with NIST Special Publication 800-171 through a comprehensive set of cybersecurity services including the development of a System Security Plan, identification of control gaps, and establishment of incident reporting procedures. The work is focused on ensuring that systems handling controlled unclassified information meet federal security requirements, with deliverables centered on documentation, analysis, and procedural readiness rather than technical implementation. The effort is critical to maintaining eligibility for Department of Defense contracts requiring NIST SP 800-171 adherence. This subcontract is issued under NAICS code 541512 for Computer Systems Design Services and is associated with the Active Devices Division of the Department of Defense. Performance is required at the location specified in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses must be submitted by July 29, 2026, indicating a tight turnaround. The nature of the work implies immediate execution and close coordination with the prime contractor to align compliance activities with broader program timelines and assessment schedules.

Computer Systems Design Services

POSTED

DEADLINE