This Solicitation opportunity from Department Of State was posted on June 27, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Electrical Forklift for US Consulate General Nogales

Closed

RFQ-240007Federal

Submission Closed07/16/2024, 06:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333924

New

DIBBS

MODULE, OPER PRESENCThis contract pertains to the procurement of a MODULE OPER PRESENCE item identified by NSN 5999-01-575-6564, with a quantity of ten units to be delivered within 100 days after order date. All supplies must comply with stringent DLA packaging standards as outlined in MIL-STD-2073-1E and MIL-STD-129 for marking, including specific packaging methods, containment materials, and palletization requirements aligned with RP001. The item is subject to strict prohibition of mercury and ozone-depleting substances, with limited exceptions for functional uses in batteries, fluorescent lights, instruments, weapon systems, and naval-specified reagents, and requires secondary containment for mercury-bearing portable devices per NAVSEA 5100-003D. No class I ozone-depleting substances may be used in manufacturing or processing without explicit written approval from the contracting officer, and this restriction overrides any conflicting specification unless the item qualifies as commercial under FAR 11.001. Contractors seeking to substitute the approved source must submit documentation from the original manufacturer for prior approval. Delivery is FOB origin to DLA Distribution San Joaquin in Tracy, CA, with inspection and acceptance occurring at the destination. The unit of issue is each, with zero variance allowed, and special marking is not required. Technical data is not available at the issuing center. The solicitation number is SPE7M5-26-Q-0758, with a response deadline of August 1, 2026, and a performance address tied to the government warehouse in Tracy. The item is linked to purchase request 7017039444 with a required ship date of September 17, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Scissor Lift Supply – OEM or Authorized DistributorThe contract requires the supply of one new MEC Micro 26-XD Scissor Lift with Xtra-Deck, fully functional and in full compliance with the manufacturer’s specifications, including all necessary packaging, documentation, and timely delivery. The equipment must be procured from an OEM or authorized distributor to ensure authenticity, performance, and warranty validity. The place of performance is specified as Salem with a ZIP code of 24153, indicating the final destination for delivery and acceptance. The solicitation is classified as a subcontract under NAICS code 333924, which pertains to construction machinery and equipment manufacturing. The Department of Veterans Affairs through its 246-NETWORK Contracting Office 6 is the overseeing agency, and responses are due by July 29, 2026, at 1:00 PM, with the opportunity posted on July 24, 2026. No set-aside provisions are specified, and the contract is open to eligible contractors without restriction based on small business status or other classifications.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Mulcher AttachmentThe contract is for a mulcher attachment compatible with the 2026 John Deere MH60, solicited under number M0068126Q0058 with a posting date of July 24, 2026, and a response deadline of July 29, 2026. This solicitation is a total small business set-aside under the Small Business Administration, classified under NAICS code 333924, which pertains to other farm machinery and equipment manufacturing. The procuring entity is the Department of Defense, specifically the Office of the Commanding General, located at Camp Pendleton, California, with the primary point of contact being Gabriel Lopez and secondary contact Marcus Schnars, both reachable through marcusschnars@usmc.mil. The equipment is intended for delivery to the place of performance in Twentynine Palms, California, 92277, where it will support operational needs. The contract is accessible via the SAM.gov portal for interested small business vendors.

POSTED

DEADLINE

3930--MEC MICRO 26-XD SCISSOR LIFTThe U.S. Department of Veterans Affairs, through Network Contracting Office 6, is conducting market research to identify qualified vendors capable of supplying one MEC Micro 26-XD Scissor Lift with Xtra-Deck for delivery to the Hampton VA Medical Center in Salem, Virginia. This effort uses the NAICS code 333924 for Industrial Truck, Tractor, Trailer and Stacker Machinery Manufacturing, with a small business size standard of 900 employees, and seeks to determine whether a future procurement can be awarded on a brand name or equal, unrestricted basis. Vendors must provide detailed information including company name, address, point of contact, tax ID, DUNS number, Unique Entity ID, GSA schedule details if applicable, capabilities statement, and socio-economic status such as small business, SDVOSB, or WOSB. Non-OEMs must submit proof of authorized distributor status, and all respondents must be currently registered in the System for Award Management under the specified NAICS code. Responses must be submitted via email to Kenneca.Crump@va.gov no later than 9:00 AM EST on July 28, 2026, with the RFI number 36C24626Q0832 included in the subject line, and must be in Microsoft Office or PDF format. The government will not reimburse any costs associated with preparing responses, nor will it engage in discussions or provide debriefings following submission. This request is strictly for market research purposes to inform future acquisition strategies, and any information gathered may be incorporated into a subsequent solicitation. The place of performance is Salem, Virginia, and all items must meet or exceed the specified product requirements, with like alternatives requiring full technical documentation for evaluation.

246-NETWORK Contracting Office 6 (36C246)

POSTED

DEADLINE

Electronic Scissor LiftThe contract calls for an electronic scissor lift branded as JLG or an equal model with part number ES1932, designed for both indoor and outdoor use with a 24V DC electric drive system for high efficiency. The unit must have a maximum width of 32 inches to navigate standard doorways and a stowed height of 78.2 inches, weighing no more than 3,450 lbs. It must achieve a platform height of at least 19 feet and support a minimum load capacity of 507 lbs, with an extendable deck offering at least 36 inches of additional outreach. The lift must accommodate two personnel indoors and one outdoors and be operable while fully elevated, with a minimum gradeability of 25 percent. Safety features include quickly folding rails equivalent to QuikFold, an active pothole protection system, and a load sensing system to enforce safe operational limits. The operator platform must include a built-in USB charger and a device holder for convenience. This is a total small business set-aside under NAICS code 333924, solicited by the U.S. Army at Fort Drum, New York, with responses due by July 31, 2026, and the contract was posted on July 24, 2026. Primary point of contact is Sarah Long, with secondary contact Mark Hill providing additional support.

POSTED

DEADLINE

Supply of Pro-Till 30' Field Cultivator (or Equivalent)The contract seeks the supply of a new Pro-Till 30' Field Cultivator, Model PTL30, or an approved equivalent that fully complies with the specified technical requirements. The deliverable must include complete delivery and unloading services, ensuring the equipment is properly installed and ready for use. All components and manufacturing processes must adhere to Buy American and applicable trade agreement standards, requiring full domestic content or permissible foreign sourcing under federal regulations. The offering must be submitted by a small business as this is a total small business set-aside under SBA guidelines, with the NAICS code 333924 designating it within the agricultural machinery manufacturing sector. The solicitation was posted on July 23, 2026, and responses are due by August 10, 2026, with performance expected under the auspices of the Department of the Interior, specifically Sat Team 2 FWS. No specific delivery location is provided, but the equipment must meet all federal procurement conditions applicable to agency operations.

POSTED

DEADLINE

Electric Hoist Supply and ManufacturingA commercial electric hoist must be manufactured and supplied in full compliance with detailed technical specifications, federal regulations, and warranty standards for delivery to a Department of Homeland Security facility located in Curtis Bay, Maryland, with a ZIP code of 21226. The contract is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 333924 identifies the industry classification as other industrial machinery manufacturing. The opportunity was posted on July 23, 2026, with submissions due by August 3, 2026, at 5:00 AM Eastern Time. The procurement is managed by the SFLC Procurement Branch 2 under the Department of Homeland Security, and the hoist must be capable of reliable operation in a federal facility environment, adhering strictly to all applicable safety, performance, and documentation requirements.

Sflc Procurement Branch 2(00085)

POSTED

DEADLINE

Diesel 5k forkliftsThe Department of Veterans Affairs, through the Network Contracting Office 15 in Leavenworth, Kansas, is seeking diesel-powered 5,000-pound capacity forklifts under solicitation 36C25526Q0498_0001, a special notice amendment issued on July 23, 2026, with responses due by July 31, 2026. This solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under NAICS code 333924, requiring offerors to certify as small businesses owned and controlled by service-disabled veterans. The place of performance is Saint Louis, Missouri, where delivery and acceptance of the equipment will occur. Technical requirements include a nominal lift capacity of 5,000 lbs, with a minimum acceptance threshold of 4,500 lbs at 189-inch fork height, and functional air conditioning as a required salient characteristic. No contract type, pricing details, or estimated value is specified in the amendment; line-item data, payment information, or invoicing procedures are not provided. The amendment clarifies technical acceptability criteria in response to prior questions but does not include the full statement of work, evaluation factors, contract clauses, packaging standards, or special requirements. Proposals must acknowledge the amendment and be submitted either electronically or in writing to the designated office by the deadline. The contracting officer, Steve Parrott, is the primary point of contact, though no contracting officer’s representative or inspection protocol details are identified. All submissions must be received at the Leavenworth, Kansas address, and while electronic submissions are permitted, no file formats are mandated.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

ECS 65 ForkliftsThe contract titled ECS 65 Forklifts is a combined solicitation issued under solicitation number W911S226U3789 with a posted date of July 23, 2026, and a response deadline of July 28, 2026. It is designated as a Total Small Business Set-Aside under FAR 19.5, specifically targeting small businesses as defined by the Small Business Administration, with the NAICS code 333924 indicating it relates to material handling equipment manufacturing. The contracting office is the W6QM Micc-Ft Drum under the Department of Defense, located at Fort Drum, New York, with a zip code of 13602-5220. The place of performance is listed with a zip code of 01434, though the specific city and state are not provided. Primary point of contact for inquiries is Guillermo Ramos, reachable via email at guillermo.ramos1.civ@army.mil or by phone at 6095627558. All responses and submissions must be directed through the designated SAM.gov portal linked in the contract details.

POSTED

DEADLINE

3990--Mt. Home Reach Truck Intent to Sole SourceThe James H. Quillen VA Medical Center is sole-sourcing a contract to Aviate Enterprises, Inc. for the purchase of a 3,000-pound capacity walkie reach stacker and associated accessories to improve on-site organization and space efficiency at Building 205 on Dogwood Avenue in Mountain Home, Tennessee. Aviate Enterprises, Inc. has been selected because it is a certified Service-Disabled Veteran-Owned Business verified through SAM and SBA Small Business Search, and its quoted price has been deemed reasonable and acceptable by the requesting service. The total contract value remains under the Simplified Acquisition Threshold, allowing the procurement to proceed under FAR 6.302-5 and FAR 13.106-1(b)(1), which authorize single-source acquisitions under specific statutory and threshold conditions. The North American Industry Classification System code for this procurement is 333924, with a size standard of 900 employees. This notice of intent to sole source is not a solicitation for competitive bids, but interested parties may submit information regarding their capability to fulfill the requirement by the deadline of July 30, 2026. Any responses must clearly demonstrate that competition would be advantageous to the government; however, the government retains full discretion to decide against opening the procurement to competition regardless of responses received. The government is not obligated to award a contract based on these submissions, will not provide feedback on responses, and is not required to acknowledge receipt. No proprietary, classified, or sensitive information should be included in submissions, as the government may use non-proprietary technical data in future solicitations. Responses to this notice do not constitute a formal bid and will not be considered a response to any future solicitation that may be published on Federal Business Opportunities.

249-NETWORK Contract Office 9 (36C249)

POSTED

DEADLINE

TractorThe contract, titled Tractor with solicitation number W911S226U3644, was posted on July 23, 2026, and requires responses by 5:00 PM Eastern Time on July 27, 2026. It is a combined solicitation under a Total Small Business Set-Aside as defined by FAR 19.5, meaning only small businesses eligible under the Small Business Administration criteria may submit bids. The North American Industry Classification System code 333924 identifies the procurement as pertaining to Farm and Garden Machinery and Equipment Manufacturing, specifically indicating a focus on tractor-related equipment. The contracting office is the W6QM Micc-Ft Drum under the Department of Defense, located at Fort Drum, New York, with a zip code of 13602-5220. The place of performance is listed with a zip code of 66442, though the city and state are unspecified. Primary point of contact is Gary Jungels, reachable at 520-945-4198 or gary.j.jungels.civ@army.mil, with Yvonne Johnson-Wilson as the secondary contact at 520-945-4596 or yvonne.a.johnson-wilson.civ@army.mil. The contract was amended to include a previously missing set-aside code and has been reposted to ensure compliance with procurement requirements, and all submissions must be made through the provided SAM.gov link.

POSTED

DEADLINE

Tractor Purchases for the Forest ServiceThe U.S. Department of Agriculture, Forest Service, through its CSA Southwest 1 office in Albuquerque, New Mexico, is soliciting bids for the purchase of compact utility tractors equipped with integrated front loaders and backhoes under a total small business set-aside with NAICS code 333924, limiting eligibility to small businesses with fewer than 900 employees. The solicitation, numbered 127EAY26Q0107 and posted on July 23, 2026, with a response deadline of July 30, 2026, has been amended to allow multiple awards, and proposals must meet stringent technical specifications including a 35–43 HP diesel engine, hydrostatic transmission, 4WD, 540 rpm PTO, Category I 3-point hitch with 2500–2800 lb lift capacity, a front loader with 101–105 inch lift height and 2000–2200 lb capacity, and a backhoe with 7–8 ft dig depth and 180° swing. All equipment must be factory-integrated and delivered within 120 days of contract award to one of three designated locations in California, with delivery terms requiring F.O.B. Destination. Evaluation will be conducted on a Lowest Price Technically Acceptable basis, prioritizing technical compliance over price, with proposals failing if they do not meet all salient characteristics, provide required documentation, or deliver on schedule. Past performance will be assessed using adjectival ratings, and only the lowest-priced technically acceptable offer will be selected. Contractors must be registered in SAM, hold a UEI or CAGE code, and certify compliance with a range of federal requirements including the Buy American Act, anti-trafficking provisions, equal opportunity, paid sick leave, cybersecurity safeguarding, and DEI compliance under newly enacted clauses. The contract prohibits discrimination and imposes strict reporting obligations for entities engaging in DEI-related programs, with violations potentially resulting in False Claims Act liability or termination. Payment will be processed electronically via SAM, and invoices must be submitted to the contracting office in Albuquerque. The solicitation includes four attachments outlining terms and conditions and detailed equipment specifications, and while no pricing data is provided in the document, offerors are required to submit itemized pricing for all line items. Security and information safeguarding requirements are mandated under clauses addressing covered contractor information systems, and no COR or COT

Csa Southwest 1 Usda-Fs

POSTED

3 days ago

DEADLINE

in 4 days

General Info

Agency

Department Of State → American Consulate NogalesView Agency

NAICS

333924 - Industrial Truck, Tractor, Trailer, and Stacker Machinery ManufacturingView NAICS

Place of Performance

Nogales, MX-SON, 84065, MEX

Set-Aside

NONE

Documents

(1)

RFQ-240007+-+US+Consulate+General+Nogales.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 27

Solicitation

Response DeadlineJul 16

Deadline has passed

Submission Closed

07/16/2024, 06:59:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of State → American Consulate Nogales

Contacts1 person available

OfficeWASHINGTON, DC, 20520, USA

Organization / Agency

Department Of State → American Consulate Nogales

View Agency Profile

Office AddressWASHINGTON, DC, 20520, USA

Contacts

Nogales Procurement

contact@example.gov

Full Description

The US Consulate General Nogales seeks to purchase an electric forklift for indoor/outdoor use. If you would like to submit a quotation, carefully review the below Statement of Work, fill out and sign the attached Standard Form 1449, and submit your quotation to the email address mentioned below. Only email quotations will be accepted. The U.S. Government will award on a lowest price, technically acceptable basis from responsible offerors submitting a proposal. The award will be based on initial quotations without discussions, although discussions might be held with companies in the competitive range if there is a need to do so. Quotations are due by 7/15/2024 - 11:59 p.m. MST-7. No quotations will be accepted after this time. Proposals must be in English. Incomplete quotations will not be considered.