Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on July 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Electrical Installation and Wiring

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
MAIN GROUNDING ELECTRODE
Solicitation # main-grounding-electrode
The Woodland Job Corps Center, operated by Adams and Associates, Inc. for the US Department of Labor, is soliciting a single lump sum contract for a licensed electrical contractor to inspect and repair grounding systems at multiple campus buildings in Laurel, Maryland. The scope of work includes the Aspen Dorm, Vocational Building, Willow Hall, Holly Dorm, Maple Dorm, and Oak Dorm, as well as the Administration Building. Technical requirements specify the installation of #2/0 awg conductors from underground copper water pipes, 16x2 inch ground bars, two 8-foot ground rods with 6-foot separation, and the use of 3/4 inch EMT conduit. All work must comply with NEC 2023, 250, as well as EPA, OSHA, and Maryland state and local regulations. Proposals are due by September 3, 2026, and must be submitted on company letterhead to Purchasing Manager Audrey Davis. Evaluation is based on a best-value determination, with price weighted at 60 percent, quality at 20 percent, past performance at 10 percent, and schedule at 10 percent. Required submission documents include a detailed cost breakdown, a valid Maryland contractor's license, insurance certificates, a W9, and a completed vendor questionnaire. The contractor must provide a one-year workmanship guarantee and adhere to strict security and labor standards, including FAR 52.222-41(g) payroll practices. Payment terms are Net 30, and the contractor must start work within 14 days of receiving the Notice to Proceed.
Adams & Associates\ Woodland Job Corps Center

POSTED

1 day ago

DEADLINE

in 15 days
NAICS: 238210
New
Electrical Repair Services
Solicitation # Electrical Services 8-2026
The Management and Training Corporation, acting for the U.S. Department of Labor, is soliciting a fixed-price, single lump sum contract for various electrical repair services at the Centennial Job Corps Center in Nampa, Idaho. This opportunity is set aside for small businesses and various other SBA-certified categories, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must submit their proposals by August 31, 2026, at 3:00pm MST via email to Sandra Clore. A pre-bid meeting is scheduled for August 21, 2026, at 10:00am MST. The scope of work includes all electrical services detailed in the Construction Bid Package, requiring the contractor to handle all incidental work, acquire necessary building permits, and provide a one-year written guarantee of workmanship. Awardees must provide closeout documentation, including two sets of operation and maintenance manuals and manufacturer warranties. Bids must include a detailed cost breakout on company letterhead covering materials, labor, equipment, and associated fees. For bids equal to or exceeding 25,000 dollars, a bid bond of 20 percent is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. The contract is subject to Construction Wage Rate Requirements and requires weekly certified payroll. Payment will be made via progress payments using AIA G702 and G703 forms, contingent upon the submission of a Schedule of Values. Contractors are subject to strict federal regulations, including security requirements for personnel identity verification, basic safeguarding of information systems, and mandatory DOL records management training. MTC retains the right to terminate the contract for any reason with 30 days' notice or immediately if government funding is lost.
Management & Training Corporation/Centennial Job Corps Center

POSTED

1 day ago

DEADLINE

in 13 days

AI Contract Overview

Show more

The contract titled Electrical Installation and Wiring is a subcontract issued by the Department of National Defence under the Government of Canada, focusing on the installation of comprehensive electrical systems including conduits, wiring, panels, and lighting fixtures. The work is specifically scoped for performance at Petawawa, with the North American Industry Classification System code 238210 indicating it falls under electrical contracting services. The solicitation was posted on July 3, 2026, and responses are due by August 14, 2026, at 7:00 PM. There is no set-aside designation specified, meaning the contract is open to eligible contractors without restriction based on business size or ownership type. Interested parties must submit proposals through the Canada Buys platform using the provided tender notice link.

General Info

Electrical installation contract for Petawawa, due August 14, 2026, open to all eligible contractors via Canada Buys.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Petawawa, CAN

Set-Aside

NONE

Documents

This scope was carved out of W6399-26-LX56/A.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Straight Truck with Sleeper Cab and Van Body

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of electrical systems including conduits, wiring, panels, and lighting fixtures.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 336411
New
International
Uncrewed Aircraft System - Light
Solicitation # W8703-270009/A
The Department of National Defence is soliciting a General Purpose Uncrewed Aircraft System (GPUAS) for light land forces, with the requirement to deliver a minimum of 80 systems by March 1, 2027, to 7 CF Supply Depot in Edmonton, Alberta. The system must support a broad spectrum of military operations including Intelligence, Surveillance, and Reconnaissance (ISR), force protection, targeting, strike missions, situational awareness, and training. Key technical specifications include a maximum take-off weight of 5 kg or less, an endurance of at least 30 minutes with an electro-optical/infrared payload, a dash speed exceeding 55 km/h, and a service ceiling of at least 8,000 feet ASL, all measured under ISA conditions. The system must comply with Canadian and international standards including ISO 2533:1975, DND and CF airworthiness directives, and must incorporate cybersecurity measures such as secure boot, authenticated software, no external kill switches, no undocumented data exfiltration pathways, and prohibit critical components manufactured in adversary nations, including flight controllers, radios, cameras, and ground control stations. The procurement follows a Phase Bid Compliance Process and is restricted to Canadian Suppliers who meet stringent eligibility criteria, including a permanent place of business in Canada, tax registration, and employment of Canadian personnel. Bidders are required to complete the Canadian Content Attestation Form to quantify Canadian Value-Added, which accounts for 25% of the award evaluation, alongside Technical Merit (50%) and Price-per-Unit (25%). The highest combined score determines award selection, with ties broken by the highest Canadian Value-Added score. All submissions must be in English or French and sent exclusively via email to tanya.mckenzie@forces.gc.ca by August 25, 2026. Bidders must structure proposals into three sections: Technical Offer, Financial Offer, and Offer Submission Forms, including mandated documents such as the Offeror Declaration and Canadian Content Attestation. Delivery must be made Delivered Duty Paid under Incoterms 2020 to the specified Edmonton location, with packaging adhering to environmentally preferred standards, ISPM 15 wood packaging rules, and controlled goods marking requirements. The contract is governed by the Defence Protections Act and includes warranty terms of 12 months post-acceptance, 30-day payment terms after invoice receipt, and potential late payment interest at the average rate plus 3
Aircraft Manufacturing

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 335311
New
International
1250 kVA Shore Power Autotransformer for CCG AOPS
Solicitation # RFQ-CCG-AOPS-2026-001
The Department of National Defence, on behalf of the Canadian Coast Guard, is seeking quotes for the design, manufacture, testing, and delivery of one 1250 kVA three-phase autotransformer. The equipment is required to convert 450 VAC primary shore power from Department of National Defence facilities to 600 VAC secondary power for Arctic and Offshore Patrol Ships. The unit must be copper-wound with Class 220 insulation, an impedance of less than 4 percent, and a CSA Type 3R enclosure finished in ANSI 61 grey. A critical requirement is that the transformer must fit within an ISO 668 Type 1C 20-foot freight container and not exceed a maximum weight of 8,000 kg to ensure compatibility with shipboard crane lifting capacities. The selected contractor must maintain an ISO 9001 certified Quality Management System and perform Factory Acceptance Testing at an ISO/IEC 17025 certified facility. Deliverables include the autotransformer and a comprehensive electronic PDF documentation package containing FAT reports, electrical schematics, arrangement drawings, and operation and maintenance manuals. Delivery is required within 14 weeks of contract award to the NC5 Jetty in Halifax, Nova Scotia, under Delivered Duty Paid terms. This request for quote is issued for planning and estimation purposes and does not constitute a formal offer or guarantee of a contract award.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 337215
New
International
Static Shelving System
Solicitation # W0501-27-M040/A
The Department of National Defence is soliciting a firm fixed price contract for the supply, delivery, and installation of a modular static shelving system for the 5th Canadian Division Support Base Gagetown Personnel Support Services in Oromocto, New Brunswick. The required system totals 67.5 feet and consists of six specific sections ranging from 2 to 12 feet. Each section must feature nine open-face levels, two movable dividers per level, retractable work shelves, full perimeter panels, and hinged locking doors with padlock attachment points. All materials must be new and defect-free, with a final delivery and installation deadline of March 31, 2027. The procurement process utilizes a pass/fail technical evaluation based on mandatory criteria M1 through M11, followed by a financial evaluation in Canadian dollars. Delivery is required on a Delivered Duty Paid (DDP) Incoterms 2020 basis to Building J7, Room B234. The contract emphasizes environmental sustainability, requiring reusable, returnable, or recyclable packaging. While there are no specific security clearance requirements, the contractor must maintain accounting records for seven years post-payment and adhere to Canada's Code of Conduct for suppliers. Proposals must be submitted electronically to the contracting authority, Ann Marie MacDonald, by the specified deadline.
Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

3 days ago

DEADLINE

in 9 days
View Details
NAICS: 332992
New
International
Cartridge, 9mm Luger JHP Ammunition
Solicitation # W8486-260493/A
Canada is soliciting the procurement of 9mm Luger Jacketed Hollow Point (JHP) ammunition for use by domestic law enforcement personnel through a firm requirement of 1,200,000 cartridges to be delivered to CFAD Dundurn, Saskatchewan, and 600,000 cartridges to CFAD Angus, Ontario, no later than July 1, 2027. An optional quantity of up to 2,400,000 additional cartridges may be ordered in two separate optional delivery windows: 720,000 to Dundurn and 480,000 to Angus between September and December 2029, and another 720,000 to Dundurn and 480,000 to Angus between September and December 2031. All ammunition must be new production, less than 12 months old at delivery, and conform to strict technical specifications including a maximum power factor of 150, minimum projectile penetration of 30.48 cm, and minimum expansion diameter of 0.560 inches. The ammunition must comply with SAAMI Z299.4-2015, CIP, and AEP-97 M-CMOPI standards, and be packaged in UN-certified reusable metal containers compliant with STANAG 4280, with each container not exceeding 23 kg gross weight. Packaging must also meet ISPM 15 wood treatment standards, and all items must be properly labeled with UN shipping information, NATO Stock Numbers, lot identifiers, and explosive hazard labels per U.N. Model Regulations. The contract operates under a Delivered Duty Paid (DDP) term, requiring the contractor to bear all costs and risks until delivery at the designated Canadian Forces Ammunition Depots. Technical compliance is mandatory and evaluated on a pass/fail basis with no weighting; award will follow the Lowest Evaluated Price with Mandatory Technical Criteria (LPTA) method. Contractors must be eligible under Canadian procurement policies, including compliance with the Controlled Goods Program, and must certify absence of forced labor, adherence to international sanctions, and alignment with ISO 9001:2015 quality management systems. All documentation must be submitted electronically by August 20, 2026, to Trevor.Clark@forces.gc.ca, and invoices must be sent electronically to ContractAdmin.DQA@forces.gc.ca with required accounting
Small Arms Ammunition Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details