Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on July 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Electrical Installation and Wiring Services

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
MAIN GROUNDING ELECTRODE
Solicitation # WL-26-006
The Woodland Job Corps Center, operated by Adams and Associates, Inc. for the U.S. Department of Labor, is soliciting a licensed electrical contractor to inspect and repair grounding systems across multiple campus buildings in Laurel, Maryland. The scope of work, identified as WL-26-006, includes the Aspen Dorm, Vocational Building, Willow Hall, Holly Dorm, Maple Dorm, and Oak Dorm, as well as necessary corrections to the Administration Building. All work must comply with NEC 2023, 250 standards, as well as EPA, OSHA, and Maryland state regulations. Technical requirements include the installation of #2/0 awg conductors, 16x2 inch ground bars, 8-foot ground rods with 6-foot separation, and the use of 3/4 inch EMT conduit for routing. This is a single lump sum contract with proposals due by September 3, 2026. Award decisions will be based on best value, weighted by price (60%), quality (20%), past performance (10%), and schedule (10%). Bidders must provide a detailed cost breakdown, a valid Maryland contractor's license, and proof of comprehensive insurance, including general liability of at least 1 million dollars per occurrence. The contractor must start work within 14 days of the Notice to Proceed and provide a one-year workmanship guarantee. Final payment is contingent upon the submission of a completed SF 1413, release of liens, and the successful completion of a final acceptance inspection. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and VOSB.
Adams & Associates\ Woodland Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 5 days
NAICS: 238210
New
PANELBOARDS
Solicitation # WL – 26 -0004
This solicitation, identified as WL-26-0004, is for a single lump sum contract to perform electrical panelboard repairs and labeling at the Woodland Job Corps Center in Laurel, Maryland, operated by Adams and Associates for the U.S. Department of Labor. The scope of work requires the provision of non-handwritten circuit directories for buildings E, F, G, K, and M, the reinstallation of a panelboard cover in the welcome center mechanical room, and specific fire alarm control panel identification at the Oak Dormitory, including UL listed red mark labels and updated panel schedules. All work must comply with NEC 2023, OSHA, EPA, and Maryland state regulations. The performance period is scheduled from May 11, 2026, through December 31, 2026. Proposals are due by September 3, 2026, and must be submitted on company letterhead including a detailed cost breakdown, a timeline for substantial completion, and proof of a valid Maryland contractor's license. Attendance at the mandatory bid conference is required for consideration. Award will be based on best value, weighing technical quality and price. The contractor must provide comprehensive insurance coverage, including general liability of at least 1 million dollars per occurrence, and guarantee all workmanship for one year. Final payment is contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens from all subcontractors and suppliers.
Adams & Associates\ Woodland Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 5 days
NAICS: 238210
New
Wind River Job Corps: LAWN EQUIPMENT STORAGE ROOM VENTILATION
Solicitation # wind-river-job-corps-lawn-equipment-storage-room-ventilation
Arbor E & T, LLC dba Equus Workforce Solutions is seeking bids for a subcontracting opportunity to remediate a life safety deficiency at the Wind River Job Corps Center in Riverton, Wyoming. The project involves installing mechanical ventilation in a lawn equipment storage room to mitigate dangerous fuel vapor accumulation. The scope of work includes creating an 18-inch by 18-inch rough opening in an exterior concrete block wall, installing one wall-mounted explosion-proof exhaust fan capable of 600 CFM, and installing two 18-inch by 24-inch door-mounted ventilation louvers. Electrical requirements include providing approximately 90 linear feet of conduit and wiring for a 208 volt, 1 phase, 1/3 HP motor designed for continuous operation, all of which must adhere to the National Electrical Code. This is a small business set-aside opportunity under NAICS code 238210. Bids must be submitted electronically to Hannah Schooner by September 2, 2026, at 2:00 PM MST. Required submission documents include a completed bid sheet, Vendor Self-Certification Form, and signed Terms and Conditions. The award will be based on best value. The contractor must comply with the Service Contract Act, including specific wage determinations for Wyoming, and adhere to federal regulations such as FAR clauses regarding trafficking in persons and small business program representations. Final acceptance requires operational start-up testing and the provision of manufacturer warranties and project manuals.
EQUUS Workforce Solutions operator of the Wind River Job Corps

POSTED

about 4 hours ago

DEADLINE

in 4 days
NAICS: 238210
New
Electrical Repair Services
Solicitation # Electrical Services 8-2026
Management & Training Corporation, acting on behalf of the U.S. Department of Labor, is soliciting bids for a fixed-price, single lump sum contract to provide various electrical repair services at the Centennial Job Corps Center in Nampa, Idaho. The solicitation is open to small businesses, including SDB, WOSB, HUBZone, and VOSB certified entities. Bids must be submitted via email to Sandra Clore by August 31, 2026, at 3:00pm MST. A pre-bid meeting was scheduled for August 21, 2026. The scope of work includes all electrical services, incidental work required by building codes, and the acquisition of necessary permits. Awardees must provide a one-year written guarantee of workmanship and deliver comprehensive operation and maintenance manuals upon substantial completion. Financial and compliance requirements are stringent, with a mandatory bid bond of 20% and subsequent performance and payment bonds required for bids equal to or exceeding $25,000. The contract is subject to Construction Wage Rate Requirements, necessitating weekly certified payroll and adherence to the provided wage determination for Idaho. Bidders must provide a detailed cost breakout on company letterhead covering labor, materials, equipment, and overhead. Payment is handled through progress payments using AIA G702 and G703 forms, contingent upon the submission of a Schedule of Values. Additionally, contractors must comply with federal security and privacy regulations, including mandatory DOL training and strict data breach liability protocols.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 1 day

AI Contract Overview

Show more

The contract pertains to the installation of comprehensive electrical systems for a government project under the Department of National Defence, Government of Canada. It includes all aspects of electrical work such as wiring, conduits, outlets, lighting fixtures, and power distribution infrastructure, ensuring full compliance with applicable codes and standards. The work is to be performed across locations in British Columbia and Nova Scotia, Canada, with no specific city or address designated, indicating potential multi-site coverage within these provinces. This is a subcontract opportunity posted on July 15, 2026, with a response deadline of July 30, 2026. The North American Industry Classification System code 238210 identifies it as electrical contracting services. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors without preference or restriction. The procurement is managed through CanadaBuys, and interested parties must submit their proposals through the official tender portal prior to the deadline to be considered for award.

General Info

Electrical installation services for Canadian government project in British Columbia and Nova Scotia, due July 30, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Canada, British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

This scope was carved out of W8482-275428/A.

The full solicitation package (8 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Windshield Wiper Assembly

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of electrical systems, including wiring, conduits, outlets, lighting, and power distribution for the project.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

New
International
Diving,Reel and Light,Signal
Solicitation # W8482-275400/A
The Department of National Defence is soliciting bids for the supply of diving reels and signal lights under solicitation W8482-275400/A, with deliveries required at CFB Halifax, Nova Scotia and CFB Esquimalt, British Columbia. Each location will receive 100 diving reels, manufactured by JULIAN JAMES RICHARD TAYLOR with part number DITD-REEL-001 and NCAGE KD8T7, and 400 signal lights, manufactured by PACIFIC SCUBA INDUSTRIES with part number 450STROBE-MT and NCAGE L12Q9. All items must be delivered on a Delivery Duty Paid basis, with the contractor assuming full responsibility for transportation, duties, and delivery to the specified locations. Submissions must comply with strict packaging, preservation, and marking standards including D-LM-008-001/SF-001, MIL-STD-2073, and NATO TL8100-0100, with mandatory UCC/EAN-128 barcoding using Application Identifiers for NSN and PSCN, and human-readable annotations. Each item must be permanently marked with the manufacturer’s name and part number, and packaging must meet Canadian Forces specifications with expiration and cure dates clearly stated where applicable. Dangerous goods must be labeled in accordance with federal legislation, and all shipments require packing slips and inspection vouchers as needed. The solicitation operates under a Lowest Price Technically Acceptable evaluation model, where bids must first satisfy mandatory technical requirements including correct part numbers, NCAGE codes, and compliance with packaging and labeling standards to be considered; failure to meet any criteria results in disqualification. Among technically compliant offers, the lowest price determines award, with no trade-offs permitted between cost and technical merit. Offers may be submitted in either official Canadian language and must include supporting documentation such as the Offeror Submission Form, Declaration Form, and, if proposing substitutes, full equivalency documentation with brand, model, and NCAGE details. Contractors must affirm compliance with Canadian Content, Federal Contractors Program for Employment Equity, and anti-conflict of interest and anti-forced labor requirements, and are subject to security clearance obligations if handling protected information, with potential site inspections and adherence to the Controlled Goods Program. Payment will be processed through designated DND accounts in Halifax and Victoria, via direct deposit or wire transfer, with invoices requiring detailed financial code references. Records must be

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 332322
New
International
Sheet Metal Standing Offer
Solicitation # W8486-260642/A
The Department of National Defence is soliciting bids for a Standing Offer to supply sheet metal in two sizes—6-foot and 10-foot—under a two-year firm term with three optional one-year extensions, for delivery to two Canadian Forces Supply Depots: 25 CFSD in Montreal and 7 CFSD in Edmonton. The estimated annual quantities are up to 10,000 units of 6-foot sheet metal for Montreal, 6,000 for Edmonton, 9,000 units of 10-foot sheet metal for Montreal, and 8,000 for Edmonton, with all deliveries required within 90 days of a call-up. All goods must conform to the Technical Data Package and packaging standards outlined in Canadian Forces Packaging Specification D-LM-008-036/SF-000, including palletization on standard wood pallets, adherence to ISPM 15 for wood packaging, and clear labeling with manufacturer name and part number. Pricing is not fixed at award; instead, offers must propose unit prices to be adjusted post-award using an Industrial Product Price Index-based formula, with all prices quoted in Canadian dollars on a Delivered Duty Paid basis. The procurement is structured as a Lowest Price Technically Acceptable competition, where technical compliance is mandatory, and award will go to the lowest-priced offer that meets all requirements. Offerors must provide brand, model, part number, and NCAGE, and those qualifying as Indigenous businesses under the federal Procurement Strategy for Indigenous Business must submit relevant certification. The contract includes stringent integrity clauses prohibiting conflicts of interest, bribes, contingency fees, and forced labor, with contractors required to certify compliance with ethics codes and employment equity. Invoices must be submitted electronically to a designated email and include proper financial codes, and all deliveries are subject to inspection and acceptance by the Government of Canada at either the contractor's facility or destination. No security clearances or key personnel requirements apply, and proposals must be submitted electronically via email in separate sections, with no file exceeding 5 MB and no web links or macros permitted.
Sheet Metal Work Manufacturing

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 335312
New
International
Motor, Alternating Current
Solicitation # W8482-275360/A
The Department of National Defence is seeking proposals for two line items of alternating current motors, part number A/365TD/47 Mawdsley, manufactured by COMPAIR CANADA INC with NCAGE code 36008 and GSIN 6105, for delivery to CFB Halifax and CFB Esquimalt in quantities of six and four units respectively. The solicitation, numbered W8482-275360/A, was posted on July 31, 2026, with responses due by August 13, 2026, and is governed by a Firm Fixed Price contract structure under a Lowest Price Technically Acceptable evaluation methodology, where technical compliance is a mandatory pass/fail requirement and award is determined solely by the lowest evaluated price among compliant offers. Bidders must offer the exact part number or provide a fully documented equivalent or substitute product with corresponding brand, model, and NCAGE information, and all submissions must be submitted through CPC Connect or via fax, with proposals including mandatory annexes such as the Offeror Declaration Form, Submission Details, and Submission Form. Delivery is required under DDP terms, meaning the contractor assumes all transportation, duties, and risks until the items are received at the designated locations, with inspections and acceptance performed by the Government at the destination sites. Packaging and marking must comply with Canadian Forces specification D-LM-008-001/SF-001 for Canadian contractors, or MIL-STD-2073 and MIL-STD-129 for U.S. contractors, while EU-based contractors must meet NATO TL8100-0100 standards, and all items must bear barcodes using UCC/EAN-128 symbology with appropriate application identifiers and human-readable text. Items must be new, fully compliant with technical requirements, and carry at least 75% of their authorized shelf life, with quality assurance requirements aligned to ISO 9001:2015 and supporting documentation provided with each shipment. Invoices must be submitted to the Maritime Forces Atlantic Accounts Payable office in Halifax in a machine-readable format, accompanied by applicable financial codes and certifications, and contractors must maintain complete records for seven years post-payment. The contract includes strict obligations related to conflict of interest, employment equity, international sanctions compliance, and the safeguarding of classified or protected material if applicable, with the contractor liable for subcontractor compliance and subject to government inspection
Motor and Generator Manufacturing

POSTED

2 days ago

DEADLINE

in 9 days
View Details