Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electrical Installation and Wiring Services

Active

State & Local

Response Deadline08/26/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Electrical Installation and Wiring Services outlines the scope for installing electrical systems on commercial or infrastructure projects, covering power distribution, lighting, and control wiring. It is structured as a subcontract and is identified under NAICS code 238210, which corresponds to electrical contracting services. The solicitation was posted on August 5, 2026, with a response deadline of August 26, 2026, and is issued by the state of Montana under its agency designation. The place of performance and specific location details are not provided, but the work is expected to occur within Montana’s jurisdiction. Interested parties must submit proposals prior to the deadline through the designated online portal linked in the notice, and no set-aside provisions or organizational type restrictions are specified.

General Info

Electrical installation subcontract for Montana projects with bidding deadline August 26, 2026.

Agency

MontanaView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 26

Submission deadline

Response Deadline

08/26/2026, 08:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMontana

ContactsNo contacts available

OfficeN/A

Organization / Agency

Montana

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installation of electrical systems, including power distribution, lighting, and control wiring for commercial or infrastructure projects.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in elevator lobbies across the terminal, including 17 passenger elevators, three service elevators, and three ramp landing elevators. This work is part of a broader effort to enhance emergency communication infrastructure within the airport facility and is being managed by the Aviation Project Management Group under the Port of Seattle. The project is forecasted with a posting date of July 31, 2026, and falls under NAICS code 238210, indicating it pertains to electrical contracting services. Primary point of contact is Angela Peterson, with Christina Burdett serving as the project manager, and all correspondence should be directed through the provided email addresses and phone numbers. The work location is at the Port of Seattle facility, though specific city or state details are not provided in the data.

Aviation Project Management Group

POSTED

about 9 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle will replace 125 aging Robicon variable frequency drives (VFDs) with new equipment as part of Phase 3 of its VFD Replacement initiative. This effort aims to upgrade outdated infrastructure to ensure system reliability and improve operational efficiency across aviation facilities and infrastructure. The new VFDs will be fully integrated with the Port’s Direct Digital Controller (DDC) system to enable real-time energy usage monitoring, output control readings, and efficiency tracking, enhancing the Port’s ability to manage power consumption and maintain optimal performance. The scope includes all necessary wiring, testing, commissioning, and installation of associated equipment required to deliver a fully functional and synchronized system. The work falls under NAICS code 238210 and is managed by the Aviation Facilities & Infrastructure division, with technical oversight from Project Manager Sharon Miick and primary point of contact Yanet Maldonado. Although the solicitation number and set-aside details are not specified, the forecast was posted on July 31, 2026, signaling upcoming procurement activities. The project is critical for modernizing the Port’s electrical infrastructure and supporting long-term sustainability goals through precise control and monitoring of motor-driven systems. All work must be performed on-site at the Port’s facilities, with full accountability for system integration, performance validation, and operational readiness upon completion.

Aviation Facilities & Infrastructure

POSTED

about 9 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract requires the provision of design, permitting, and construction services to install 50 high-resolution cameras across 43 sites in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and enforcement capabilities by replacing outdated systems with improved coverage, specifically targeting main terminal drive lanes and entrances previously unmonitored, with the goal of supporting forensic investigations and adherence to port movement rules. In the Bagwell area, the new cameras will shift focus from conveyor systems and security doors to critical transit corridors, while the North Cargo operations will benefit from flexible, user-controlled Pan Tilt Zoom units that provide broad surface area monitoring and dynamic viewing capabilities to address operational gaps. All work must be completed in accordance with specified technical and operational standards to ensure seamless integration with existing security infrastructure. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The North American Industry Classification System code 238210 identifies this as a specialty trade contracting effort focused on electrical and communication system installation. Although the solicitation has not yet been formally issued, the forecasted posting date is July 31, 2026, indicating this is a forward-looking opportunity for qualified contractors to prepare proposals. The place of performance is within the Port of Seattle’s operational boundaries, and all contractors must be prepared to navigate port-specific logistics, security protocols, and environmental constraints during installation and commissioning.

Aviation Project Management Group

POSTED

about 9 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle’s Aviation Project Management Group is planning to replace the existing Aqueous Film Forming Foam (AFFF) fire suppression system at the Rental Car Facility located in SeaTac with a full dry chemical system to eliminate contamination from per- and polyfluoroalkyl substances (PFAS). The project entails the complete removal of the current foam-based system, including all contaminated components such as tanks, piping, and sprinkler heads, followed by the design and installation of a new dry system comprising new storage tanks, control valves, pumps, sprinkler lines, and sprinkler heads, along with reserve tanks for system integrity. The new system must be fully integrated with the facility’s existing Fire Alarm System to ensure seamless operation and compliance with safety protocols. The work is classified under NAICS code 238210 and is being advertised as a re-bid under the title Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement, targeting an efficient and timely execution to minimize service disruption. Primary point of contact for inquiries is Todd Rehm, with Pat Nakamura serving as the Project Manager.

Aviation Project Management Group

POSTED

about 9 hours ago

DEADLINE

Parking Garage UPSThe contract involves the demonstration and full replacement of the existing uninterruptible power supply (UPS) system in a parking garage that supports critical operations including ticketing kiosks and automated gates. The scope includes installing new UPS equipment along with associated electrical infrastructure such as subpanels, feeders, disconnects, and circuit breakers to ensure reliable backup power. The new UPS system will feature integrated data connections to enable remote alarm monitoring and system diagnostics, enhancing operational awareness and response capabilities. All work will be performed at the Port of Seattle’s parking facility, under the oversight of the Aviation Project Management Group. The project is forecasted to be released on July 31, 2026, with no set-aside provisions indicated and NAICS code 238210 specifying electrical contracting services. Primary point of contact is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager for coordination and technical inquiries. All work must comply with the operational and safety standards required by the Port of Seattle, and performance is expected to be completed at the designated parking garage location without specified alternative sites.

Aviation Project Management Group

POSTED

about 9 hours ago

DEADLINE

Electrical Unit Price Portwide 2026_1 and _2This contract encompasses a broad range of electrical services to be performed across multiple Port of Seattle facilities including Seattle-Tacoma International Airport, maritime properties, and surrounding areas. The work includes but is not limited to the installation of raceways, wiring, medium voltage cabling, electrical boxes, transformers, temporary power and lighting systems, grounding, and associated testing, all in full compliance with applicable codes and regulations. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidentals required to complete tasks as directed through Work Authorizations issued by the Port. Labor must be delivered according to the specified classifications outlined in the Schedule of Unit Prices, ensuring consistent pricing and accountability. The Port of Seattle anticipates a high volume of small-scale electrical projects over the coming year and plans to award two separate contracts under this solicitation to ensure sufficient capacity and rapid response times. The goal is to maintain operational continuity and meet dynamic project demands by leveraging two qualified contractors. The contract is identified under the NAICS code 238210 and is issued through Port Construction Services, with primary coordination handled by Heather Bowden and Lesley Miles. All work must be performed at designated Port-wide locations, and contractors are expected to adhere strictly to the terms and pricing structure detailed in the bid documents.

Port Construction Services

POSTED

about 9 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi-0

Parsons Subcontract Administrator Anna Ma is managing a solicitation for the installation of a new Fiber Optic Transmission System at Daniel K. Inouye International Airport in Honolulu, Hawaii, with work divided into two phases involving conduit trenching and boring between three buildings. The project is classified under NAICS codes 238210, 237130, and 237990, with an estimated construction value between one and five million dollars. The solicitation, designated RFO AWP-0772-00, is set to close on August 15, 2026, and is designated for small business set-asides, including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Businesses. The work is under the oversight of PTSI Managed Services, Inc. and is exclusively open to qualified firms that respond to the solicitation through the provided point of contact, with all correspondence directed to Anna Ma at anna.t-ctr.ma@faa.gov.

PTSI Managed Services, Inc.

POSTED

about 9 hours ago

DEADLINE

RFO AWP-0772-00, HNL Fiber Optic Transmission System (FOTS) Design Support and Construction in Honolulu, HI

Solicitation # rfo-awp-0772-00-hnl-fiber-optic-transmission-system-fots-design-support-construction-honolulu-hi

The contract involves the installation of a new Fiber Optic Transmission System (FOTS) at Daniel K. Inouye International Airport in Honolulu, Hawaii, with work divided into two distinct phases. The project encompasses conduit trenching and directional boring between three airport buildings to support the deployment of underground fiber optic infrastructure. The estimated construction value falls between one million and five million dollars, and the work aligns with NAICS codes 238210, 237130, and 237990, indicating a focus on electrical and communication installations, as well as other heavy and civil engineering construction. The solicitation is set aside exclusively for small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. The solicitation number is RFO AWP-0772-00, with a response deadline of August 15, 2026, and inquiries should be directed to Anna Ma, Parsons Subcontract Administrator, via email at anna.t-ctr.ma@faa.gov or phone at 360-204-4418.

PTSI Managed Services, Inc.

POSTED

about 9 hours ago

DEADLINE

Replacement Fiber Line

Solicitation # Replacement Fiber Line

The contract requires the replacement of existing multi-mode fiber optic cabling with a new 12-strand single-mode fiber optic cable system connecting Building 2436 to Building 2443 at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The work includes removing retired multi-mode aerial fiber lines and splice boxes from utility poles and installing new 12-strand OS2 OSP fiber using center-owned poles, with specific equipment requirements including Belden FS3L0024NS fiber, ECX-01U rack-mounted enclosures, FFSX12LD adapter panels, and FTSLC900FS01 LC connectors or approved equivalents. All labor, tools, equipment, and materials are the contractor’s responsibility, except for SFPs, which will be provided by Job Corps. The project is structured as a fee-for-service contract with a lump sum pricing model, and the contractor must submit weekly or bi-weekly invoices detailing purchase order numbers, service dates, itemized pricing with extended totals, and invoice references. The place of performance is clearly defined at the Job Corps Center, and acceptance occurs upon delivery at the MTC-designated point after final inspection, with the contractor warranting all work and materials to conform to specifications, be merchantable, of good workmanship, and free from defects. The solicitation is limited to small business set-asides including SBA-recognized categories such as Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned Small Business, with NAICS code 238210 and a size standard of $19.0 million. The contractor must comply with Service Contract Labor Standards under WD# 2015-4687 (Rev 31), the Contract Work Hours and Safety Standards Act for overtime compensation, and DBA wage requirements, with full responsibility for ensuring subcontractors adhere. Compliance with FAR clauses includes reporting executive compensation, clauses incorporated by reference from February 1998, and data rights provisions. First-tier subcontractors exceeding $30,000 must disclose debarment status, and all contractors must provide proof of insurance with $1 million per occurrence/$3 million aggregate general liability, $1 million auto coverage, and $500,000 workers’ compensation, naming MTC as the certificate holder and additional insured. The contractor must indemnify MTC against liabilities arising from their

Earle C. Clements Job Corps Center

POSTED

about 9 hours ago

DEADLINE

AEA-0536, VORTAC (ART) Doppler Conversion, Watertown, NY

Solicitation # aea-0536-vortac-art-doppler-conversion-watertown-ny

The FAA is upgrading an existing VHF Omnidirectional Range (VOR) facility in Watertown, New York, to a modern Doppler VORTAC system with an offset TACAN component, requiring the complete demolition of the current infrastructure. The new Doppler VORTAC will be built on-site with a 37’x37’ steel building featuring a 60-foot diameter counterpoise integrated into the roof, along with required foundations, site preparation, and utility connections. Accompanying the main structure is an offset TACAN system mounted on a 16’x16’x20’ steel walk-up tower, which will also include dedicated foundations, site work, and utility infrastructure. The project is solicited under contract number AEA-0536, with a response deadline of August 28, 2026, and is set aside for small business concerns including small disadvantaged, women-owned, HUBZone, veteran-owned, and service-disabled veteran-owned small businesses. The contracting organization is PTSI Managed Services, Inc, operating under Parsons, and the primary point of contact for inquiries is Angela Stydinger of the FAA.

PTSI Managed Services, Inc (Parsons)

POSTED

about 9 hours ago

DEADLINE

Argyle Park Community Centre – Lighting, Fire Alarm and Electrical Upgrades

Solicitation # COR26-00239

The City of Regina is soliciting proposals for electrical upgrade services at the Argyle Park Community Centre, specifically targeting improvements to lighting systems and fire alarm infrastructure to enhance safety, reliability, code compliance, energy efficiency, and overall functionality. All submissions must be clearly labeled with the solicitation number COR26-00239 and sent via email to procurement@regina.ca no later than 2:00 p.m. Central Standard Time on August 26, 2026. The selected contractor will be responsible for evaluating existing systems, supplying and installing all required equipment, performing thorough testing and commissioning, and delivering complete documentation verifying that all upgraded systems meet applicable codes and standards. A mandatory pre-submission meeting is scheduled for August 11, 2026, at 9:00 a.m. at the community centre located at 35 Davin Crescent, Regina, Saskatchewan, to address inquiries from interested vendors. This procurement is governed by trade agreements including Chapter 5 of the Canadian Free Trade Agreement, Chapter 19 of the Comprehensive Economic and Trade Agreement, and Article 14 of the New West Partnership Trade Agreement. While there will be no public opening of submissions, the names of all respondents will be published on the Sasktenders website following the deadline.

POSTED

about 16 hours ago

DEADLINE

On-Call Electrical Services for the Saskatoon Area

Solicitation # 251-2026

The Government of Saskatchewan, through SaskBuilds and Procurement, is inviting qualified electrical contractors to apply for non-exclusive, multi-year on-call agreements to provide maintenance and repair services for government facilities in the Saskatoon area. These services will include both routine and emergency electrical work across multiple locations, with contractors expected to respond promptly to requests as they arise. Proposals will be assessed based on the applicant’s experience, ability to deliver timely and reliable service, capacity to meet response time requirements, and competitive pricing. Participation is restricted to suppliers registered in the Government Enterprise Management system, where all competition documents, amendments, and updates will be posted. Only registered users may download bidding materials, submit inquiries, and submit formal proposals. To participate, interested suppliers must complete mandatory self-registration through the GEM portal before the bid deadline of August 26, 2026. Registration can be initiated via the Negotiation Abstracts Page using the solicitation number 251-2026 or the title On-Call Electrical Services for the Saskatoon Area. All communications, including clarifications and revisions, will be conducted solely through the GEM platform, and failure to register will disqualify a supplier from submitting a bid. The opportunity is open to any qualified electrical contractor, with no set-aside provisions, and no specific NAICS code has been assigned. For assistance, suppliers may contact the provided support email address. All activity regarding this solicitation is managed through the provincial procurement system, and no external documents or communications will be recognized as official.

SaskBuilds and Procurement

POSTED

about 16 hours ago

DEADLINE

More opportunities from Montana

Same awarding agency

Site Grading and EarthworkThe contract titled Site Grading and Earthwork involves excavation, grading, and compaction of soil to prepare a site for foundation and utility installation. It is classified as a subcontract under NAICS code 237990, indicating specialized earthwork services for construction projects. The solicitation was posted on August 5, 2026, with a response deadline of August 26, 2026, leaving potential bidders approximately three weeks to submit proposals. The contracting agency is identified as Montana, with no specific city, state, or zip code provided for the place of performance or office address, suggesting the project location may be determined upon award or is broadly scoped across the state. The work is critical to enabling subsequent construction phases and must comply with engineering specifications for soil stability and compaction standards. Bidders can access further details through the provided web link to the state’s procurement portal.

Other Heavy and Civil Engineering Construction

POSTED

about 17 hours ago

DEADLINE

HVAC System InstallationThe contract titled HVAC System Installation pertains to the comprehensive setup of heating, ventilation, and air conditioning systems including all associated ductwork, equipment units, and control systems. It is issued as a subcontract under NAICS code 238220 and is solicited by the State of Montana with a response deadline of August 26, 2026. The posting date is listed as August 5, 2026, and while the specific location of performance is not detailed, the work is intended to support state facilities within Montana. The solicitation does not specify a set-aside type or indicate whether preference is given to small businesses or other categories. Interested parties must submit responses by the stated deadline through the provided online portal.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

Concrete Formwork and PlacementThe contract titled Concrete Formwork and Placement involves the complete process of forming, reinforcing, and pouring structural concrete for foundations, slabs, and walls, requiring precise execution to meet engineering and safety standards. This subcontract is open for bid under NAICS code 238110 and is administered by the State of Montana, with all work expected to be performed within the state, though specific locations are not detailed. The solicitation was posted on August 5, 2026, with responses due by August 26, 2026, and bidders must ensure compliance with all technical and procedural requirements outlined in the full solicitation document available through the provided link. There is no set-aside designation specified, meaning the contract is open to all qualified contractors regardless of business size or ownership type.

Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

Plumbing and Piping Systems InstallationThe contract outlines the installation of potable water, sanitary sewer, and storm drainage systems compliant with applicable building codes, targeting infrastructure development within Montana. It is classified as a subcontract under NAICS code 238220, specifically for plumbing and piping systems, indicating the work involves technical construction and engineering services tied to municipal utilities. The solicitation was posted on August 5, 2026, with a response deadline of August 26, 2026, offering a three-week window for qualified subcontractors to submit proposals. The place of performance and specific location details are not provided, suggesting the project may span multiple sites or that final assignments will be determined post-award. While no set-aside provisions or agency sub-organization are specified, the contracting entity is listed as the State of Montana, and interested parties must access the bidding portal via the provided URL to review full requirements and submit responses.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

Lyons Creek Truck Parking Area Maintenance Great Falls Division

Solicitation # MDT-316565-KB

The Montana Department of Transportation is soliciting bids for the maintenance of the Lyons Creek Truck Parking Area under the Great Falls Division, identified by solicitation number StateOfMontana-MDT-316565-KB. The opportunity was posted on August 5, 2026, with a response deadline of August 26, 2026, and all submissions must be made through the eMACS platform. Bidders are required to register as vendors and log into eMACS to access full specifications, ask questions via the Q&A Board, and submit their responses. No set-aside criteria are specified, and the contract falls under state-level procurement managed by the Montana agency. All inquiries related to technical requirements or solicitation details must be directed through the eMACS Q&A Board, and general support for platform use is available through the eMACS Help Desk. The point of contact for the solicitation is Krystelle Baranyai, reachable at kbaranyai@mt.gov, and the bidding process is conducted entirely online via the provided UI link.

Other Heavy and Civil Engineering Construction

POSTED

about 17 hours ago

DEADLINE

Judith Landing State Park Interpretation Plan

Solicitation # StateOfMontana-FWP-27-0012

Montana Fish, Wildlife & Parks is seeking a qualified interpretive planning consultant to develop a comprehensive Conceptual Interpretive Plan for Judith Landing State Park, Montana’s newest heritage park, with a project ceiling of $67,000. The consultant will review and refine a draft interpretive framework provided by FWP, conduct an on-site assessment in fall 2026, and produce a phased implementation strategy that translates cultural, historical, natural, and recreational values into actionable interpretive experiences. Deliverables include a revised interpretive framework, a site visit summary with mapped observations, a conceptual interpretive plan with an integrated matrix linking themes, locations, audiences, and media, a costed phased implementation plan, and a final editable and printed version of the complete plan that meets ADA accessibility standards and incorporates tribal and public feedback. The consultant must hold a National Association for Interpretation Certified Interpretive Planner credential or demonstrate equivalent experience, and key personnel must be clearly identified with resumes and employment verification. All AI use in proposal development and deliverables must be fully disclosed, including the specific tools, models, and dates used, with human validation confirmed, and AI-generated images must be submitted alongside their originals. Proposals must comply with mandatory requirements, including submission of a Business Information document, a Trade Secret Affidavit if confidential information is included, and certification of compliance with the Equal Pay for Montana Women initiative, which grants a 5% evaluation bonus. Submission is strictly through the eMACS portal by August 20, 2026, with no exceptions to format or deadline, and proposals must include detailed cost breakdowns by task, resumes of key personnel, and three examples of prior work. The contract execution period is 12 months, with completion targeted in time for the park’s spring 2028 opening, and final acceptance rests with Montana Fish, Wildlife & Parks following evaluation using a consensus-based scoring rubric that weighs technical merit and cost as a trade-off. No formal federal contract clauses or packaging, preservation, or marking requirements apply, as this is a state-level professional services solicitation under NAICS code 541690, managed directly by FWP with Dani Lindeman as the primary point of contact.

Other Scientific and Technical Consulting Services

POSTED

about 23 hours ago

DEADLINE

Environmental and Erosion Control ComplianceThe contract entails the development and implementation of erosion and sediment control plans along with stormwater pollution prevention plans to ensure environmental compliance throughout construction activities. It requires ongoing monitoring and adherence to regulatory standards designed to minimize environmental impact from runoff, soil disturbance, and other construction-related pollutants. The work is scoped as a subcontract under NAICS code 541620, indicating environmental consulting services focused on compliance and remediation. The solicitation was posted on August 3, 2026, with a response deadline of August 24, 2026, and is issued by the State of Montana, though specific project location and point of contact details are not provided. The place of performance and agency office details remain unspecified, and no set-aside status is designated. Bidders must respond through the official state procurement portal linked in the solicitation, and the scope demands technical expertise in environmental planning and on-site compliance monitoring to support sustainable construction practices.

Environmental Consulting Services

POSTED

DEADLINE

Pipeline Testing and Inspection ServicesThe contract titled Pipeline Testing and Inspection Services seeks qualified subcontractors to perform post-installation pressure testing, leak detection, and joint inspection on underground piping systems, ensuring all work meets established safety and operational standards. Comprehensive certification and compliance reporting are required to document the integrity of the installed infrastructure, with all activities tied to regulatory and industry-specific benchmarks for underground pipeline systems. The scope demands technical expertise in non-destructive testing methods and the ability to deliver accurate, timely documentation that validates system performance and adherence to safety protocols. This opportunity is posted as a subcontract under NAICS code 541330 by the State of Montana, with a response deadline of August 24, 2026. The solicitation does not specify a set-aside classification or indicate particular size or ownership requirements, leaving the opportunity open to eligible subcontractors who can demonstrate proven capability in pipeline testing and certification. All work is expected to be conducted in accordance with Montana’s requirements, though the exact locations of performance are not detailed. Interested parties must submit proposals through the provided online portal by the stated deadline to be considered.

Engineering Services

POSTED

DEADLINE

Excavation and Trenching ServicesThe contract involves comprehensive excavation and trenching services required for the installation of underground piping, including all necessary shoring, backfilling, and soil compaction to ensure structural integrity and compliance with engineering standards. Spoil removal and final site grading are also included as part of the scope to restore the work area to its required condition after installation. The work must be performed in accordance with industry best practices and safety regulations, with all activities focused on the precise execution of subsurface infrastructure development. This is a subcontract under the NAICS code 238910, with a response deadline of August 24, 2026, and posted on August 3, 2026. The contracting entity is the State of Montana, though specific location details such as city, state, or zip code for the place of performance are not provided. Bidders must submit proposals through the designated online portal by the deadline, and all work is expected to adhere to state-mandated standards without additional set-aside requirements identified.

Site Preparation Contractors

POSTED

DEADLINE

Specialty Piping Materials SupplyThe contract seeks the supply of underground piping materials including HDPE, PVC, and steel pipe along with associated fittings, valves, and related components for use in infrastructure projects under the jurisdiction of Montana. The scope encompasses the provision of high-quality, code-compliant materials suitable for long-term underground installation, with an emphasis on reliability and durability under varied environmental conditions. The vendor is expected to support just-in-time delivery schedules and provide comprehensive logistics coordination to ensure timely and efficient material placement at project sites. The solicitation is structured as a subcontract and falls under NAICS code 423730, which corresponds to plumbing and heating equipment and supplies merchant wholesalers. Responses are due by August 24, 2026, with the opportunity posted on August 3, 2026. The place of performance and exact delivery locations are not specified in the data, indicating that work may be distributed across multiple sites within Montana. Interested parties must engage through the provided online portal to submit proposals, and the contract does not indicate any set-aside provisions for small businesses or other designated categories.

Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant Wholesalers

POSTED

DEADLINE

Underground Piping Removal and InstallationThe contract entails the complete removal and replacement of underground product piping, requiring full excavation, installation of new piping, proper jointing techniques, backfilling, compaction, and thorough site restoration to original conditions. The contractor is responsible for providing all labor, materials, equipment, and incidental costs necessary to complete the work in accordance with applicable standards and safety requirements. This is a subcontract under NAICS code 237120, specifically for underground construction services, and is being managed by the state of Montana with a response deadline of August 24, 2026. The place of performance and specific location details are not provided, but the work is expected to occur within Montana. Interested parties must submit proposals through the designated public bidding portal by the stated deadline.

Oil and Gas Pipeline and Related Structures Construction

POSTED

DEADLINE

Electric Lift Motor Products

Solicitation # MSU-SSJ-27-1

Montana State University is seeking qualified vendors to submit detailed descriptions of electric lift motor products that meet specific requirements under a sole source procurement, with no competitive bidding process being conducted. The solicitation, identified as StateOfMontana-MSU-SSJ-27-1, was posted on August 3, 2026, and responses must be submitted by August 17, 2026. Vendors who believe they can provide an equivalent product capable of fulfilling all stated needs are invited to engage through the eMACS Q&A Board to ask questions or seek clarification, with all inquiries required to be submitted by the specified deadline. The primary point of contact for this solicitation is Connor Markus, reachable via email at connor.markus@montana.edu. Although this is not a competitive request, vendors interested in participation must use the eMACS platform to respond and are advised to refer to the eMACS Vendor Handbook or contact the eMACS Help Desk for technical assistance regarding registration or system navigation. The contract will be awarded without competition if the sole source criteria are met, and performance is expected to be delivered to Montana State University.

Motor and Generator Manufacturing

POSTED

DEADLINE