Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Subcontract opportunity from Department Of Defense was posted on August 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Electrical Installation for Highway Lighting System

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238210
New
Inland Empire Job Corps-Request for Quote Electrical Repairs
Solicitation # Inland Empire Job Corps Electrical Repairs
Management & Training Corporation (MTC) is seeking quotations for a subcontracting opportunity to perform electrical and fire alarm repairs at the Inland Empire Job Corps Center in San Bernardino, California. Under NAICS code 238210, the selected contractor must provide all labor, materials, equipment, and permits to correct specific deficiencies. The scope of work includes installing GFCI protection in the cafeteria, culinary arts kitchen, and academic education building, repairing open-ground conditions in the dormitory and medical areas, and installing filler plates in panelboards. Additionally, the contractor must correct deficiencies in panelboards KL2A, PF, C, and H1, update circuit directories for several panels, and provide permanent labeling for feeder conductors and distribution equipment throughout the facility. All work must comply with National Electrical Code (NEC), NFPA, and applicable federal, state, and local requirements. Bids must be submitted as a lump sum fee by November 12, 2026, at 3:00 PM PT. To be considered, offerors must provide a completed bid sheet, a W-9, a supplier self-certification form, proof of insurance with at least $1,000,000 in general liability and $500,000 in employer's liability, and three references for projects of similar scope. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Award decisions are based on best value as determined by MTC. The contract is subject to Service Contract Labor Standards wage determinations for Riverside and San Bernardino counties and includes strict requirements for information security, privacy breach notification, and mandatory Department of Labor training for employees.
Inland Empire Job Corps

POSTED

about 2 hours ago

DEADLINE

in 2 days
NAICS: 238210
New
26-140 Installation of Emergency Shut Off Switches
Solicitation # 26-140
Solicitation 26-140 is a subcontracting opportunity for the installation of emergency shut-off switches on power tools at the Atterbury Job Corps Center in Edinburgh, Indiana, operated by Adams and Associates for the U.S. Department of Labor. The scope of work specifically requires the installation of two mushroom-head push-button emergency shut-off switches and a new 60A, 208/120V, 3-phase, 4-wire, 6-circuit branch circuit panel with a 60A shunt-trip main circuit breaker in the Facility Engineering Storage/Maintenance Shop. All work must comply with OSHA, EPA, and FNC guidelines, as well as applicable Indiana state and local building codes. The project is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certifications. Interested bidders must have attended a mandatory site visit on November 10, 2026, and submit a typed proposal on company letterhead by November 20, 2026. Proposals must be submitted as a single lump sum contract including a detailed cost breakdown, a timeline for substantial completion, and proof of a valid Indiana Contractor's License. Award will be based on best value, evaluated across price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Contractors are required to maintain comprehensive insurance, including general liability of at least $1,000,000 per occurrence and automobile liability. Compliance with Davis-Bacon Act wage rates is mandatory. The contract features Net 30 payment terms, and final payment is contingent upon the submission of a completed SF 1413, certified payroll records, and a release of liens. All workmanship is guaranteed for one year following the date of substantial completion.
Atterbury Job Corps. – Adams & Associates

POSTED

about 2 hours ago

DEADLINE

in 9 days
NAICS: 238210
New
Transformer Oil Testing Services
Solicitation # RFP-VC-26-010
The Inland Empire Utilities Agency is soliciting proposals under RFP-VC-26-010 for professional transformer oil testing services to enhance the reliability, safety, and maintainability of its transformers. The project scope encompasses three primary areas: performing visual and infrared thermographic inspections to identify thermal anomalies, installing standardized external oil sampling devices to improve safety during collection, and conducting oil testing analysis. Additionally, the selected contractor will evaluate nitrogen blanket systems, assess monitoring instrumentation, develop preventive maintenance checklists, and provide on-site training for agency staff. All work must be performed at designated agency facilities in Rancho Cucamonga and Chino, adhering to NETA MTS, IEEE, NFPA 70E, and ASTM D923 standards. The agency intends to make a single award to the most capable and cost-effective offeror. Evaluation criteria include a proven track record of at least two similar projects within the last five years, personnel qualifications, the proposed staffing plan, and the ability to meet the project timeline. Proposals must be submitted electronically via the PlanetBids portal by December 23, 2026, and must include a comprehensive set of documents, including a company profile, project methodology, and various certifications such as a Non-Collusion Statement and Workers Compensation Certificate. Payment will be processed electronically via ACH within 30 days of invoice approval by the Project Manager.
Inland Empire Utilities Agency

POSTED

about 2 hours ago

DEADLINE

in about 1 month
NAICS: 238210
New
Centennial JCC Emergency Lighting Replacement, Upgrade, Testing & Maintenance Services
Solicitation # centennial-jcc-emergency-lighting-replacement-upgrade-testing-maintenance-services
Management & Training Corporation is soliciting bids for a fixed-price, single lump sum subcontract to provide emergency lighting replacement, upgrade, testing, and maintenance services at the Centennial Job Corps Center in Nampa, Idaho. The project involves the inspection, testing, repair, and certification of emergency lighting systems across several facility areas, including the cafeteria, education building, recreation center, and men's and women's dormitories. The contractor is responsible for providing all labor, materials, and equipment to inventory fixtures, perform functional power-outage testing, apply durable tracking labels to fixtures, and integrate recurring maintenance into the operator's Computerized Maintenance Management System. All work must comply with NFPA 101 (2024 Edition), NFPA 70, and OSHA safety regulations. The estimated contract value ranges between $25,000 and $100,000, with bids due by December 1, 2026. This is a small business set-aside opportunity open to various SBA certifications. Mandatory bid requirements include a physical site visit and a bid bond guarantee of 20% for bids equal to or exceeding $25,000. Awarded contractors must provide performance and payment bonds and adhere to Davis-Bacon Act prevailing wage rates and Federal Contractor Minimum Wage requirements. Evaluation is based on overall best value, and the submission must include a detailed cost breakout, a completed supplier packet, and a signed bid form.
Management & Training Corporation/Centennial Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 21 days
NAICS: 238210
New
SLED
ELECTDIS30SB On-Call Electrical Service for Hereford Shop in Baltimore County
Solicitation # ELECTDIS30SB
This single-award Invitation for Bids (IFB) seeks a contractor to provide on-call electrical repairs and services for various Hereford Shop facilities in Baltimore County, Maryland. The contract duration is four years, ending December 31, 2030, with the primary place of performance at the District 4 Office Building and Shed. The scope of work requires the vendor to furnish all labor, supervision, equipment, and materials, ensuring all electrical products are listed and labeled by Underwriters Laboratories Inc. (UL). All work must adhere to strict industry standards, including the National Electrical Code (ANSI/NFPA 70), Life Safety Code (NFPA 101), and various Federal, State, and local codes, as well as EPA, OSHA, and MDE environmental guidelines. To be considered responsive, bidders must hold a current active State of Maryland Master Electrician License and possess at least five years of experience in the commercial electrical business. The required workforce must include at least two State of Maryland licensed commercial journeyman electricians with five years of experience each, and an apprentice or helper with at least one year of experience. Award is based on the total bid amount for routine and emergency hourly rates for foremen, journeymen, helpers, and apprentices. Bidders must submit a comprehensive package via emma.maryland.gov by November 24, 2026, including a bid proposal affidavit, conflict of interest disclosure, mercury affidavit, and three commercial references from the past 24 months. Payment is processed via electronic funds transfer (EFT) following the acceptance of work by the State.

POSTED

about 4 hours ago

DEADLINE

in 14 days

AI Contract Overview

Show more

This subcontract opportunity, titled Electrical Installation for Highway Lighting System, involves the installation of electrical systems including conduit, wiring, and lighting fixtures along highway corridors. The project is managed by the Department of Defense through the W6QM Micc-Ft Drum agency and will be performed in the 13602 zip code area. The contract is designated as a total Small Business Set Aside under NAICS code 238210. Interested parties must submit their responses by the deadline of September 4, 2026, following the posting date of August 28, 2026.

General Info

Small business subcontract for highway lighting installation in 13602, due September 4, 2026.

NAICS

238210 - Electrical Contractors and Other Wiring Installation Contractors

Place of Performance

NY, 13602

Set-Aside

SBA

Documents

This scope was carved out of W911S226U4314.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Comprehensive Human Performance Suite

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Drum
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of electrical systems including conduit, wiring, and lighting fixtures along highway corridors.

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

NAICS: 334220
New
Federal
100 INCH QLED TV AND AVTEQ MAX CART HEAVY DUTY FOR TV DISPLAYS UP TO 110 INCHES
Solicitation # W911S227U0147
Solicitation W911S227U0147 is a Request for Quotation issued by the Department of Defense for the procurement of 21 units of 100-inch QLED TVs with a 16:9 aspect ratio and 21 AVTEQ MAX heavy-duty mobile carts. The carts must support displays up to 110 inches, feature a load capacity of 325 lbs, and have dimensions of 78 inches height by 48 inches width by 43 inches depth. This acquisition is a Total Small Business Set-Aside, and all equipment must be new, as used or remanufactured products are prohibited. The items are to be delivered to the 1ST Engineer BDE 554th HSD at Fort Leonard Wood, Missouri, on an F.O.B. destination basis, with a preferred delivery timeframe of 30 days. The contract is governed by a brand name or equal evaluation process, requiring that any equal products meet all salient physical, functional, and performance characteristics, supported by descriptive literature and a detailed explanation of any modifications. Offerors must submit quotes via the PIEE Solicitation module and include a completed Buy American Balance of Payments Program Certificate (Attachment 1) to avoid being rejected as nonresponsive. The AVTEQ mobile carts specifically must be Buy American compliant. Award will be granted to the responsible offeror whose proposal is most advantageous to the government based on price and technical factors. Payment terms are net 30, processed through the Wide Area Workflow (WAWF) system.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333514
New
Federal
Clicker Die Press
Solicitation # W911S227U0154
The Department of Defense, through the W6QM Micc-Ft Drum, is soliciting quotes for the procurement of one new Clicker Die Press designed for die cutting gaskets, apparel, and leather goods. This acquisition is a total small business set-aside under NAICS code 333514. The government specifies a brand name requirement for an ATOM SE 25L/CE or an approved equal. The equipment must be brand new, as used or remanufactured products are prohibited. Key technical specifications include a 1000mm by 500mm cutting table, a 610mm arm width, a 25-ton maximum cutting power, a cast iron base, a swing beam, and a programmable cutting counter. For safety, the press must feature twin piston grip pushbutton controls with a time interlock requiring synchronized pressing. The package must include three additional cutting pads and a spare parts kit containing a circuit board, filter, pressure switch, and push buttons, with oil provided separately. Offers will be evaluated based on price and technical compliance, with the award going to the responsible offeror most advantageous to the government. All quotes must be submitted via the PIEE Solicitation module and include technical and price documentation, as well as a completed certification of country of origin. Delivery is required on an F.O.B. destination basis, with a preferred delivery timeframe of within 30 days. The contract incorporates several critical regulatory clauses, including security prohibitions, Buy American requirements, and safeguarding of covered defense information. To be considered as an equal to the brand name, offerors must provide detailed descriptive literature and clearly identify the make and model of the proposed equipment.
Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332311
New
Federal
Prefabricated steel sheds
Solicitation # W911S227U0156
Solicitation W911S227U0156 is a Total Small Business Set-Aside Request for Quotation issued by the Department of Defense for the procurement and installation of new prefabricated steel sheds at Fort Drum, New York. The scope of work requires the contractor to provide all labor, tools, and equipment to erect two steel buildings, each approximately 25 feet by 20 feet, on existing concrete slabs inside a larger host building. Key technical constraints include a maximum total height strictly below 19 feet and a roof pitch not exceeding 1 to 12. The structures must utilize red-oxide steel for primary and secondary members, with 26-gauge unpainted galvalume or bare steel panels and neutral-colored trim. The contractor is also responsible for installing government-furnished electrical materials and mini-split climate control units. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and technical evaluations. Required deliverables include shop drawings, technical data sheets, an installation schedule, and a minimum one-year comprehensive warranty. Offerors must submit their quotes via the PIEE Solicitation Module and include a completed certification of country of origin. The preferred delivery timeline is within 30 days, and all offers must be submitted on an F.O.B. destination basis. Compliance with various FAR clauses is required, including sustainable products, security prohibitions, and Buy American regulations.
Prefabricated Metal Building and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339920
New
Federal
Obstacle Course Equipment
Solicitation # W911S227U0125
Solicitation W911S227U0125 is a Small Business Set Aside Request for Quotation issued by the Department of Defense for the procurement of obstacle course equipment for the 198th Infantry Brigade. The required deliverables include a personnel safety net measuring 21 feet by 68 feet meeting ANSI A10.11-2025 specifications, 12 landing pit mats measuring 6 feet by 12 feet by 24 inches with removable vinyl tops and mesh side panels, and 12 corresponding weather covers measuring 73 inches by 145 inches by 23 inches with straps and buckles. All equipment must be new, as used or remanufactured products are strictly prohibited. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and technical evaluations. This is a brand name or equal solicitation; any equal products must meet all salient physical, functional, and performance characteristics and be clearly identified by brand, make, or model. Quotes must be submitted through the PIEE Solicitation module and include a completed certification of country of origin. Delivery is required on an F.O.B. destination basis, preferably within 30 days. The contract incorporates various federal regulations, including Buy American requirements, cybersecurity safeguards, and prohibitions on certain foreign purchases and telecommunications equipment.
Sporting and Athletic Goods Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 2 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS