Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electrical Insulation Sleeving Supplier

Open

Federal

Response Deadline11/12/2026, 12:00:00 PM EST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of electrical insulation sleeving to prime contractors supporting the Department of Defense, specifically the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing material that meets NSN 5970-01-686-9124, ensuring all items undergo quality inspection and are packaged according to RP001 and MIL-STD-2073-1E standards. Additionally, all shipments must be marked in compliance with MIL-STD-129. The scope of work requires the delivery of 11 units of electrical insulation sleeving, shipped FOB Origin to DLA Distribution New Cumberland. The contract falls under NAICS code 326121 and was posted on November 4, 2026, with a response deadline of November 12, 2026.

General Info

Supply 11 electrical insulation sleeving units to DLA Weapons Support ASC Commodities Division.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

326121 - Unlaminated Plastics Profile Shape Manufacturing

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-8637.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

INSULATION SLEEVING, EL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 4

subcontract

Response DeadlineNov 12

Submission deadline

Response Deadline

11/12/2026, 12:00:00 PM ESTin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies electrical insulation sleeving for prime contractors delivering DLA supply contracts. Manufactures or sources material meeting NSN 5970-01-686-9124, performs quality inspection, and packages material per RP001 and MIL-STD-2073-1E. Marks shipments in accordance with MIL-STD-129. Delivers 11 units of electrical insulation sleeving FOB Origin to DLA Distribution New Cumberland.

Similar Contracts

Same NAICS industry code

Class III Concrete Pipe SupplyThis subcontract agreement involves the manufacture and delivery of 18-inch Class III concrete piping for prime contractors working on bridge preservation projects for the Town of Saugus Department of Public Works. The supplier is responsible for ensuring all materials meet established ASTM or AASHTO standards and coordinating the delivery of the pipes directly to the project site located on Main Street in Saugus, Massachusetts. The solicitation was posted on November 4, 2026, with a response deadline of November 30, 2026. Classified under NAICS code 326121, the contract focuses on the specialized production and logistical transport of concrete infrastructure components to support municipal bridge maintenance efforts.

POSTED

DEADLINE

Gasket Supply (NSN 5330-01-024-4653)This subcontract involves the manufacture or procurement of one gasket identified by NSN 5330-01-024-4653 for prime contractors supporting DLA supply contracts. The selected provider must ensure the part meets all associated technical specifications and adheres to strict safety and labeling requirements, including the provision of Material Safety Data Sheets per Federal Standard No. 313 and compliance with Hazard Communication Standard 29 CFR 1910.1200. The contract is issued by the Department of Defense under the DLA Weapons Support Land Supplier Opns Vehicle Spt agency, with the place of performance located in FPO 96349. The opportunity falls under NAICS code 326121 and has a response deadline of November 16, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

NONMETALLIC SPECIAL SH

Solicitation # SPE8E5-27-Q-0051

Solicitation SPE8E5-27-Q-0051 is a small business set-aside for the procurement of 158 units of nonmetallic special shaped sections, identified by NSN 9390-00-863-7596. The items must meet specific size requirements, measuring between 120 and 144 inches. This is a firm fixed-price contract with a delivery requirement of 90 days after receipt of order, with the place of performance and delivery located at DLA Distribution Jacksonville in Florida. Inspection and acceptance will occur at the destination. The contract carries stringent security and regulatory requirements, including CMMC Level 2 certification via a C3PAO and the safeguarding of covered defense information per DFARS 252.204-7012. Technical data is subject to export control under ITAR or EAR, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed DLA export-control training. Packaging and marking must adhere to MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Invoicing and payment are processed electronically through the Wide Area WorkFlow system.

JACKSONVILLE BLDG

POSTED

DEADLINE

PIN, STRAIGHT, HEADLESS

Solicitation # SPE4A6-27-T-8141

Solicitation SPE4A6-27-T-8141 is a federal procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC Commodities Division for 97 units of headless straight pins and rods under NSN 5315-0118-30960. Identified as a commercial critical application item, the procurement requires adherence to technical data package Rev C Gen 4 and standards such as SAE AS20253. The items must be delivered FOB Origin to the DLA Distribution Depot at Hill AFB, Utah, with a required delivery date of June 8, 2027, and a need ship date of April 13, 2027. Delivery is specified as 151 days after order. Quality assurance is stringent, requiring a manufacturer's inspection system compliant with SAE AS9003 or ISO 9001. Sampling must follow MIL-STD-1916, ASQ H1331 Table 1, or a comparable zero-based plan. Packaging must comply with ASTM D3951 and RP001 for palletization, with all labeling following MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including the Buy American Act and NIST SP 800-171 assessment requirements. Evaluation factors include a HUBZone price preference, while items produced via additive manufacturing are ineligible for award. Invoicing and receiving reports must be processed through the Wide Area WorkFlow (WAWF) system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Material Supply: Sewer PipingThis subcontract for the City of American Canyon involves the supply of HDPE or PVC sewer piping for prime contractors. The scope of work specifically requires the provision of 18 inch diameter sewer pipe for Location A and 8 inch diameter sewer pipe for Location B, with all materials mandated to meet ASTM standards and specific City and Engineer requirements. The supplier is responsible for delivering all piping materials directly to the designated project site or staging area. Managed by the Public Works agency in California, the opportunity was posted on September 18, 2026, with a response deadline of January 12, 2027. The contract falls under NAICS code 326121 and is focused on material supply for municipal infrastructure projects.

POSTED

about 2 months ago

DEADLINE

PVC Pipe SupplyThis subcontract for PVC Pipe Supply involves the manufacture and delivery of 8-inch and 12-inch PVC gravity pipe and force main piping for prime contractors working on Eastern Municipal Water District wastewater projects. The supplier is responsible for ensuring all materials meet specific EMWD material specifications and delivering them to the designated project site located in Menifee, California. The contract is categorized under NAICS code 326121 and is associated with the Eastern Municipal Water District in California. All deliverables must be transported to the place of performance in Menifee, zip code 92587, to support the ongoing wastewater infrastructure improvements.

Eastern Municipal Water District

POSTED

about 2 months ago

DEADLINE

Sewer Piping and Fittings SupplyThis subcontract for the City of Mountain View involves the manufacture and delivery of sewer piping and fittings to prime contractors for local utility projects. The scope of work includes providing HDPE, PVC, or Ductile Iron sewer mains, manhole rings, gaskets, and connecting hardware, all of which must adhere to ASTM standards and the city's approved materials list. The contractor is responsible for the delivery of all materials directly to the construction sites within Mountain View. This project is categorized under NAICS code 326121 and was posted on September 11, 2026.

City of Mountain View

POSTED

about 2 months ago

DEADLINE

Monitoring Well Materials SupplyThis subcontract for the City of Fresno involves the supply of specialized monitoring well materials to prime contractors working on Department of Public Works projects. The scope of work includes providing Schedule 40/80 PVC or stainless steel well casing, slotted screens, bentonite seals, and filter sand or gravel packs. All supplied materials must adhere to ASTM quality certifications to ensure compliance with project standards. The contractor is responsible for the delivery of these construction materials directly to the project sites located in Fresno, California. This procurement falls under NAICS code 326121 and is specifically designed to support the infrastructure needs of the city's public utilities.

POSTED

DEADLINE

Irrigation Pipeline Material SupplyThis subcontract for Irrigation Pipeline Material Supply involves the manufacture and delivery of HDPE, PVC, or steel piping and associated fittings for projects serving the Glenn-Colusa Irrigation District and Natomas Mutual Water Company. The scope of work requires the supplier to provide all necessary pipeline materials for a 2.56-mile conversion, with all products delivered directly to the project site located in Sacramento County. To ensure compliance, all supplied materials must meet specific irrigation and pressure certifications. The contract is categorized under NAICS code 326121 and is managed by the Glenn-Colusa Irrigation District in California.

Glenn-Colusa Irrigation District

POSTED

DEADLINE

HDPE Conduit Material SupplyThis subcontract involves the supply and delivery of high-density polyethylene HDPE piping for prime contractors working on infrastructure projects within Modoc County, California. The scope of work requires the provision of approximately 7,800 linear feet of 1.5 inch HDPE conduit and 5 inch HDPE encasement conduit specifically for Caltrans crossings, with all materials required to meet established broadband infrastructure standards. The contract is categorized under NAICS code 326121 and is managed by Modoc County. The supplier is responsible for the delivery of all specified HDPE conduit materials directly to the designated project site to support the completion of the county's infrastructure goals.

POSTED

DEADLINE

Liner Material Supply & Interface EngineeringThis subcontract, managed by the NASA SBIR/STTR Program, focuses on the procurement of advanced polymer liner materials and specialized engineering solutions. The primary objective is to eliminate leak paths at the boss/liner interface within cryogenic hydrogen tanks to ensure structural integrity and safety. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 326121, specifically targeting firms with fewer than 500 employees. Performance for this contract will take place in Cleveland, Ohio.

NASA SBIR/STTR Program

POSTED

DEADLINE

Component or Raw Material Supply for Cushioning PadsThis subcontract with the Defense Logistics Agency under the Department of Defense focuses on the supply of essential raw materials, specifically industrial foam and polyethylene. These materials are utilized in the manufacturing of military-grade cushioning pads designed for defense packaging applications. The agreement is categorized under NAICS code 326121 and was posted on August 17, 2026. It serves as a critical component of the supply chain to ensure the availability of specialized materials required for protecting sensitive defense equipment.

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Supply of Critical Application Sleeve Bearings (P/N HS5445-1)This subcontract involves the procurement and delivery of four specialized sleeve bearings, part number HS5445-1, sourced from the Roller Bearing Company of America, Inc. These components are intended for prime contractors delivering to the Department of Defense under the DLA Weapons Support ASC Commodities Division. Due to the nature of the equipment, the items must adhere to Critical Application Item quality standards. The contract requires the submission of receiving reports through the Wide Area Workflow system. Performance for this requirement is centered in New Cumberland, Pennsylvania, under NAICS code 332510. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Hexagon Head Cap ScrewsThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, involves the supply of 250 Hexagon Head Cap Screws identified by NSN 5305015885151. The contract is designated under NAICS code 332722 and requires the supplier to provide industrial fasteners to prime contractors. Performance for this contract will take place in New Cumberland, Pennsylvania. The agreement mandates strict adherence to the Berry Amendment and the Buy American Act to ensure all materials meet domestic origin requirements. Shipping will be handled according to FOB Origin and First Destination Transportation terms. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Plain Rod End Bearing Supplier (NSN 3120014551641)This subcontract involves the supply of five inspected plain rod end bearings for prime contractors supporting DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing NSN 3120014551641, also known as GE part L31302G02, which is classified as a Configuration Control Item. All deliverables must adhere to strict military standards, including marking per MIL-STD-130N and packaging requirements according to MIL-DTL-197M and MIL-STD-2073-1E. To be eligible, the contractor must hold SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act and the Berry Amendment. The performance of this contract is centered in San Diego, California, under NAICS code 332991. Responses to this opportunity are due by November 13, 2026.

Ball and Roller Bearing Manufacturing

POSTED

about 11 hours ago

DEADLINE

Third-Party Source Inspection and Quality CertificationThis subcontract for Third-Party Source Inspection and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform source inspections and quality verification at manufacturer facilities, utilizing precision measurement tools to ensure strict compliance with MS35764H and MIL-DTL-45912C standards. Additionally, the contractor is responsible for validating SAE AS9003/ISO 9001 systems and ensuring packaging meets MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N requirements, culminating in the delivery of signed inspection reports and quality certifications. Managed by the Department of Defense under NAICS code 541380, the performance of this contract is centered in Tracy, California. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

Testing Laboratories and Services

POSTED

about 11 hours ago

DEADLINE

Manufacturing of Critical Application Machine Bolts (MS35764-261)This subcontract involves the manufacture of 1,104 critical application machine bolts for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be fabricated according to MS35764H, MIL-DTL-45912C, and TDP Rev A Gen 1 specifications using precision machining, with a strict prohibition on additive manufacturing. Performance will take place in Tracy, California, under NAICS code 332722. The contractor must ensure full compliance with the Berry Amendment and maintain a quality system that adheres to either SAE AS9003 or ISO 9001 standards. Final deliverables must be packaged and labeled in accordance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. The response deadline for this requirement is November 13, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supplier of Blind Rivets (NSN 5320-00-718-0835)This subcontract involves the procurement of 3,908 blind rivets to support prime contractors on projects for the DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing rivets that strictly adhere to Part Number CCR274SS-3-6 and NSN 5320-00-718-0835, ensuring compliance with the DLA Master List of Technical and Quality Requirements. Notably, the use of additive manufacturing is prohibited for this contract. All deliverables must be packaged according to ASTM D3951, RP001, and MIL-STD-129 standards. The final shipment of 3,908 units is to be delivered FOB Origin to Tinker AFB, Oklahoma. This requirement falls under NAICS code 332510 and is managed by the Department of Defense.

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Manufacturer of Flat Washers (NSN 5310-00-178-0607)This subcontract involves the manufacture and delivery of 48 flat washers for prime contractors supporting DLA Weapons Support ASC projects. The parts must be produced according to NSN 5310-00-178-0607 technical data and adhere to either SAE AS9003 or ISO 9001 quality systems. All items must be packaged and marked in accordance with ASTM D3951, RP001, and MIL-STD-129 standards, with final delivery handled as FOB Origin to Robins Air Force Base. To be eligible, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. Additionally, access to the US/Canada Joint Certification Program is required. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Socket Head Cap Screws (NSN 5305-00-269-0783)This subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division, requires the manufacture or sourcing of 8,627 socket head cap screws. The components must strictly adhere to NSN 5305-00-269-0783 specifications, with marking and packaging requirements governed by MIL-STD-129 and MIL-STD-2073-1E respectively. All units are to be delivered to a designated destination point for final inspection and acceptance. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334418, with the place of performance located in Albany. Interested parties must respond by November 13, 2026, to provide these essential supplies for prime contractors supporting DLA Weapons Support supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 11 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for the Department of Defense under the DLA Weapons Support ASC Commodities Division. The scope of work requires the contractor to perform bare item markings according to RQ017, execute packaging and preservation in compliance with MIL-STD-2073-1E Method 33, and apply shipping labels per MIL-STD-129. These rigorous standards are necessary to ensure a 36-month shelf life for the materials. The specific deliverable consists of 21 individually marked and packaged grommets to be shipped to DLA Distribution Cherry Point. The project falls under NAICS code 488510, with a response deadline set for November 13, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Nonmetallic Grommet Manufacturer (Fuel Vent Line)This subcontract involves the manufacture of 21 nonmetallic grommets for fuel vent lines to support prime contractors on DLA Weapons Support ASC projects. The components must be fabricated according to basic drawing 78286 65307-03016 and NSN 5325-00-060-5294 using either precision molding or machining processes. Performance will take place in Cherry Point, and the final delivery must consist of 21 finished and inspected units. To qualify, the manufacturer must maintain a quality management system that complies with SAE AS9003 or ISO 9001 standards and strictly adhere to the Buy American program. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. This requirement falls under NAICS code 326199 and is managed by the Department of Defense.

All Other Plastics Product Manufacturing

POSTED

about 11 hours ago

DEADLINE

Defense Packaging and Shipping Services

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Manufacturer of Retaining Rings (NSN 5325002570209)

Hardware Manufacturing

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS