Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Insulation Sleeving Supply (NSN 5970000891454)

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the supply of electrical insulation sleeving compliant with SAE AS23053/5 and AS23053C standards, delivered on reels or spools in specified lengths, identified by NSN 5970000891454. The requirement is classified as a subcontract under the NAICS code 335932, which pertains to other electrical equipment and component manufacturing. The performance location is Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000, and the solicitation is managed by the Nuclear Reactor Program under the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of August 3, 2026, requiring all proposals to be submitted prior to the closing time. Delivery must adhere to precise regulatory and dimensional specifications to ensure compatibility with military and aerospace applications, and compliance with the stated SAE standards is mandatory. The procurement is part of ongoing support for critical electrical systems within defense infrastructure.

General Info

Supply of SAE AS23053/5 compliant electrical insulation sleeving for Tinker AFB, NSN 5970000891454, due August 3, 2026.

Agency

Department Of Defense → NUCLEAR REACTOR PROGRAMView Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device ManufacturingView NAICS

Place of Performance

TINKER AFB, OK, 73145-8000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → NUCLEAR REACTOR PROGRAM

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → NUCLEAR REACTOR PROGRAM

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of electrical insulation sleeving in specified lengths compliant with SAE AS23053/5 and AS23053C standards, delivered on reels/spools.

Similar Contracts

Same NAICS industry code

CONDUIT OUTLETThe contract pertains to the procurement of 8 units of a conduit outlet with part number HBL560R9W and NSN 5975-01-555-8269, supplied by HUBBELL INC WIRING DEVICE DIV. Delivery is required within 41 days FOB origin, with no tolerance for variance in quantity, and inspection and acceptance occur at the destination. The product must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards, including ASTM D3951 for commercial packaging. Packaging must follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA’s RP001 packaging requirements. Hazardous materials, if applicable, must be packaged per FED-STD-313 and TQ requirement IP025. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and critical, major, and minor attributes are assigned specific verification levels or AQLs. The unit of issue is each, priced at $8.00, totaling $64.00. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, with a required ship date of September 14, 2026. The contract is issued under solicitation SPE4A7-26-T-595C and falls under NAICS code 335932.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

CONDUIT, METAL, FLEXIBLEThis contract specifies the procurement of metal flexible conduit under solicitation SPE4A7-26-T-595F, with a required quantity of 24 units identified by NSN 5975-01-609-2819 and part numbers W-1297-20 from Woolf Aircraft Products, Inc. and 179489-3204 from Hypsan Precision Products, Inc. The item is source-controlled and must be manufactured and tested in strict compliance with limited rights data accessible only to approved vendors, with no government provision of technical data; only qualified suppliers with traceability to approved sources may quote. The delivery is FOB origin with a 166-day timeline, zero tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with marking in accordance with MIL-STD-129 and no special marking codes applied. Palletization follows DLA guidelines, and the unit of issue is each. All quality, inspection, and verification requirements are governed by MIL-STD-1916 or ASQ H1331 with zero non-conformances mandated unless otherwise specified. Critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. Certificate of Conformance procedures under FAR 52.246-15 are authorized unless superseded by a quality assurance letter. Documentation for source approval requires a SAR package, and technical specifications referenced by R and I numbers are defined in the DLA Master List. Defense information protections apply, and all items must comply with the referenced technical data packages revisions issued through 2024. This is classified as a critical application item with mandatory compliance to design and testing protocols under the governing drawings and quality assurance provisions.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

TAPE, INSULATION, ELEThis contract is for the procurement of one unit of electrical insulation tape, identified by NSN 5970-01-706-9505 and supplier part number S-17221 from ULINE INC, classified as a commercial off-the-shelf item. The item is subject to strict technical and packaging standards, including compliance with MIL-STD-2073-1E for preservation and MIL-STD-129 for marking, with special labeling indicating it is a Type I shelf-life item with a non-extendable 12-month life. Mercury and mercury-containing compounds are strictly prohibited in the tape, its packaging, preservation, or marking, except for specified functional uses not applicable here, and portable fluorescent lamps or instruments containing mercury must have shock-proof design and a secondary containment barrier. Delivery must be FOB destination within 20 days of contract award, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The sole delivery point is the USS SAN ANTONIO LPD 17, FPO AE 09587, and shipment must follow DLA procedures C19 and C20. Packaging must adhere to DLA’s packaging requirements, with no use of mercury-based materials at any stage. The required delivery date is July 16, 2026, and the contract number is SPE4A6-26-T-09SJ under the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving designed for special purposes, with a shelf life of 48 months and extendable under applicable conditions. The item is classified as a critical application item and must strictly comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, which supersede other standards. Packaging must adhere to DLA’s RP001 requirements and MIL-STD-129 for labeling, with commercial packaging per ASTM D3951 only if the material is non-hazardous; otherwise, it must meet FED-STD-313 and TQ requirement IP025. Palletization and unit packaging must conform to the specified QUP and UI details. The item is subject to zero-defect sampling under MIL-STD-1916 or ASQ H1331, with unspecified attributes treated as major. Mercury or mercury-containing compounds are prohibited unless explicitly exempted for functional applications like batteries or sensors, and portable devices containing mercury must have shockproof construction and secondary containment per NAVSEA 5100-003D. The item must physically conform to SAE AS85049F Revision F dated April 1, 2021, and be marked per RQ017. Inspection and acceptance occur at origin, with no variance permitted in quantity. Delivery is FOB origin, due in 170 days, with the required ship date set for January 3, 2027. All packaging and labeling must reflect proper government identification as required, and removal of such markings from non-accepted supplies is mandatory. The item is identified by NSN 5970012967959 and purchase request 7017409986, with unit price and total cost specified. Transportation and shipping details are governed by DLA proc notes C19 and C20, and delivery is directed to the designated receiving warehouse in Tracy, California.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

JUNCTION BOX ASSEMBLYThe contract pertains to the procurement of a single Junction Box Assembly with NSN 5975-01-267-3272 and part number 518929-1, furnished by LRG Corp (CAGE 75783), under solicitation SPE4A7-26-T-575V, with delivery required 162 days after award, to DLA Distribution San Diego at 3581 Cummings Road, San Diego, CA 92136-3581. The delivery term is FOB Origin, and inspection and acceptance occur at the destination. The procurement follows a simplified acquisition process with a Lowest Price Technically Acceptable (LPTA) basis for award, and no technical evaluation factors or scoring criteria are disclosed. The item is not subject to Item Unique Identification, and the contractor must comply with DLA Packaging Requirements (RP001) and MIL-STD-2073-1E for packaging, using preservation method 10 (CLNG/DRY), unit container E5, and packaging code U. Marking must conform to MIL-STD-129, including 2D barcodes for logistics tracking, and hazardous materials must be labeled per 29 CFR 1910.1200 and federal standards. Mercury and mercury-containing compounds are prohibited except for functional uses in batteries, fluorescent lamps, sensors, weapon systems, or specified reagents, with portable devices requiring shock-proof construction and a secondary containment barrier in accordance with NAVSEA 5100-003D. Radioactive materials must be disclosed if exceeding specified activity thresholds, and all hazardous materials require prior submission of Safety Data Sheets and NSN/SIN identification. Inspection and acceptance are governed by MIL-STD-1916 or comparable zero-based sampling with zero non-conformances required for acceptance, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively, and unspecified attributes deemed major. The contractor must comply with a range of FAR and DFARS clauses, including those on combating trafficking, employment eligibility, sustainable products, hazardous material safety, export controls, and protection of government-furnished property, with several clauses authorized under deviation 2026-00038. Invoicing must be conducted through Wide Area WorkFlow (WAWF), and the contractor must provide its UEI and CAGE code, while

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Electrical Chassis ManufacturingThe contract entails the full-scale manufacturing of twelve electrical chassis units strictly adhering to military specifications, covering every phase from initial design validation through component sourcing, precision assembly, and rigorous testing to ensure compliance and operational readiness. The work is subcontracted under the NAICS code 335932, reflecting classification within the electrical equipment manufacturing sector, and performance is designated to occur at a facility in New Cumberland, Pennsylvania, with the zip code 17070-5002. The solicitation, issued by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV, was posted on July 23, 2026, and requires responses to be submitted no later than July 31, 2026, indicating a tight turnaround for interested parties to prepare and submit comprehensive proposals meeting technical, quality, and delivery requirements.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

SWITCH BOXThe contract solicitation SPE7M8-26-T-5588 seeks five SWITCH BOX units identified by NSN 5930-01-582-9676, with a total estimated value of $5.00, delivered to the DLA Distribution Facility at New Cumberland, Pennsylvania, within 168 days of government direction under FOB Destination terms. All items must comply with MIL-STD-2073-1E for packaging and preservation using CLNG/DRY Method 31, and MIL-STD-129 for labeling including barcoding and special shelf life code 33 indicating a 60-month Type II shelf life. Hazardous materials must be labeled per 29 CFR 1910.1200 and radioactive materials above threshold levels must be clearly marked per MIL-STD-129. The contract requires full adherence to DLA Packaging Requirements (RP001) and incorporates technical and quality standards referenced via R or I numbers from the DLA Master List. Offerors must hold a valid UEI and CAGE code and submit representations regarding small business status, including SDB, WOSB, EDWOSB, SDVOSB, and HUBZone classifications, with mandatory disclosures if providing covered defense telecommunications equipment. The contract includes numerous FAR and DFARS clauses addressing cybersecurity, trafficking in persons, employment eligibility, sustainable products, hazardous material reporting, and NIST SP 800-171 assessment requirements, as well as flow-down obligations to subcontractors. Payment must be submitted electronically via WAWF and no paper invoices are accepted. Inspection and acceptance occur at destination by the Government, with compliance governed by FAR 52.246-2. The solicitation closes on August 3, 2026, with submissions required exclusively through the DIBBS portal, and includes no evaluation factors, award basis, or option quantities, nor are any attachments provided. The contracting officer’s representative and technical representative are not named, and the contract type remains unspecified despite the inclusion of an alternate clause.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

INSULATION SLEEVING, ELThe contract specifies the procurement of electrical insulation sleeving identified by NSN 5970000891454, with a total quantity of 3,584 feet split across three delivery lines of 31 feet, 1,541 feet, and 2,012 feet respectively. Delivery is required within 160 days from contract award, with FOB origin terms and a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at the destination, and all materials must be supplied on reels or spools, packaged per MIL-STD-2073-1E, labeled per MIL-STD-129, and palletized according to DLA packaging requirements. The product must comply with SAE AS23053/5 and AS23053C standards, and is classified as a qualified item under the QPL for electrical connector assemblies and contacts. Strict prohibitions ban intentional addition of mercury or mercury compounds, except for approved applications such as batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices required to have shock-proof housing and secondary containment as per NAVSEA 5100-003D. Sampling procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and configuration changes require formal engineering change proposals or variance requests. Shipping destinations include Tinker AFB Oklahoma, Hill AFB Utah, and Robins AFB Georgia, each with specific parcel and freight addresses. The contract was issued under solicitation SPE7M2-26-T-5710 by the Department of Defense, Nuclear Reactor Program, with a response deadline of August 3, 2026.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

INSULATION SLEEVINGElectrical insulation sleeving supplied under this contract must comply with stringent performance and quality standards, as it is a Qualified Products List (QPL) or Qualified Manufacturer List (QML) item requiring procurement exclusively from accredited manufacturers or assemblers listed on the PRI database. The product is designated as a critical application item with a 12-month extendable shelf life, classified as Type II under packaging and storage regulations. Compliance with MIL-STD-129 for marking and MIL-STD-2073-1E for packaging is mandatory, including specific labeling for shelf life and reel or spool supply format. The item must be free of intentional mercury or mercury compounds, with exceptions limited to functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, and any portable devices containing mercury must feature shockproof construction and secondary containment. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, and all attributes not otherwise classified are treated as major. Delivery is due within 20 days from contract award, FOB origin, with a 10% quantity variance allowed, and final inspection and acceptance occur at the destination. The delivery address is Kings Bay, Georgia, with detailed packaging, marking, and transportation protocols governed by DLA procedural notes and the designated unit of issue. The contract specifies the NSN 5970-00-063-1498, quantity of 2 feet, and references technical standards including SAE AS23053/1 Revision A and MIL-STD-129R, with all documentation aligned to the DLA Master List of Technical and Quality Requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

TAPE, INSULATION, ELEThe contract pertains to the procurement of electrical insulation tape, identified by part number P-213LW and NSN 5970-01-678-0586, with a quantity of two feet. The item is classified as a Type 2 (Code 4) product with a 12-month shelf life that is extendable, and it must be marked in accordance with Special Marking Code 33 to indicate this shelf life requirement. Packaging must comply with MIL-STD-2073-1E, using Method 10 for preservation, and marking must follow MIL-STD-129 standards, with palletization governed by DLA packaging requirements. All materials must be shipped via the fastest traceable means, excluding parcel post, to the Letterkenny Army Depot in Chambersburg, Pennsylvania. Delivery is required within five days of contract award, with no tolerance for shortfall and a maximum allowable overrun of 10 percent. Inspection and acceptance occur at the destination point. Sampling for quality assurance must adhere to MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are considered major unless otherwise stated in governing documents. The manufacturer may choose attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise, and MIL-STD-105/ASQ Z1.4 may only determine sample size—not acceptance criteria, which require zero non-conformances. The contract incorporates all technical and quality requirements referenced by R or I numbers from the DLA Master List, and revisions are controlled based on solicitation or award date depending on acquisition size. The supplier is NITTO, INC., and the requirement is part of a larger federal procurement under solicitation SPE4A6-26-T-09GF, with an original required delivery date of July 22, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CHANNEL AXLEThis contract pertains to the procurement of 15 CHANNEL AXLE units under solicitation SPE7L4-26-T-5790, with a delivery requirement of 168 days from the award date, to be delivered FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item is identified by NSN 5970-01-551-8597 and is subject to strict compliance with DLA packaging standards, specifically MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Packaging must adhere to DLA’s procurement requirements, including the use of approved materials and methods for preservation, wrapping, cushioning, and containerization, with all units palletized according to RP001. The contract explicitly prohibits the use of ozone-depleting chemicals and the intentional introduction of mercury or mercury-containing compounds, except for exempted functional applications such as batteries, fluorescent lights, sensors, weapon systems, and specific reagents approved by NAVSEA, which must also meet double containment and shockproof standards. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are classified with predefined verification levels. The delivery is inspected and accepted at the destination, with no variance permitted in quantity. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications, and transportation details are governed by DLAD procedural notes C19 and C20. The supplier must deliver by the original required date of June 16, 2027, with a needed ship date of January 19, 2027.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

CHASSIS, ELECTRICAL-The contract pertains to the procurement of 12 units of a CHASSIS, ELECTRICAL with NSN 5975-01-616-8607 under solicitation SPE4A7-26-T-594M, with a response deadline of July 31, 2026, and a delivery requirement of 168 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item includes technical data subject to export control under either ITAR or EAR, prohibiting any export or disclosure to foreign persons without prior authorization from the Department of State or Commerce, including foreign nationals within the U.S. Compliance with DFARS 252.225-7048 is mandatory, and access to the controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and DLA approval. Packaging must adhere to DLA standards, and non-accepted supplies must have all government identification removed. The contract is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with performance based in New Cumberland, Pennsylvania, and primary point of contact listed as Stephen Scull of DLA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → NUCLEAR REACTOR PROGRAM

Same awarding agency

ELECTRONIC MODULE, STANThis contract is for the procurement of two electronic modules, standardized under NSN 5963-01-101-6942 and part number M28787/278-1, from approved suppliers Alektronics Inc. and Indal Technologies Inc. The item is classified as a critical application and is subject to stringent Defense Logistics Agency specifications, including mandatory compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements. The module is highly sensitive to electrostatic discharge and electromagnetic interference, necessitating DOD-qualified protective packaging materials per MIL-PRF-81705, specifically Type I barrier material for both ESD and EMI protection, with Type III wrap required if cushioning is not otherwise specified. All packaging materials must originate from manufacturers listed on the QPL-81705, and handling must occur at approved field force protective workstations. The item is also prohibited from contact with mercury or mercury-containing compounds except for specified exceptions such as batteries, fluorescent lights, sensors, and weapon systems, which must include a secondary containment boundary. The contract requires delivery within 165 days to the specified destination in Tracy, California, with FOB origin terms and zero variance allowed in quantity. Inspection and acceptance both occur at the destination, and the supplier must ensure all documentation and packaging meet exacting technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the solicitation is a total small business set-aside under NAICS code 334413. The offer must include any necessary packaging data if ESD/EMI protection is not explicitly stated in the preservation method code. The contract includes detailed transportation instructions tied to DLAD procedural notes and is issued under solicitation SPE7M2-26-T-5758, with a response deadline in August 2026 and a required ship date of January 19, 2027.

Semiconductor and Related Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

TRANSFORMER, POWERThis contract is for the procurement of a single power transformer identified by NSN 5950-01-438-0097, with delivery required within 165 days from the contract award date and a final delivery deadline of January 19, 2027. The item is classified as a critical application component subject to strict quality and traceability standards, requiring all constituent parts to originate exclusively from sources listed on the qualified products list or qualified manufacturers list as defined by applicable MIL-PRF-27/320C and MIL-PRF-27G specifications. The transformer must comply with DLA’s technical and quality requirements referenced via R and I numbers from the DLA Master List, including traceability documentation retention per DLAD Procurement Note C03, and adherence to strict configuration change management procedures. Mercury and mercury-containing compounds are prohibited in or on the component except for specified functional uses in batteries, instruments, or sensors approved by NAVSEA, with portable devices containing mercury requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The item must meet NAVAIR aircraft launch and recovery equipment traceability standards, with all bare metal surfaces marked with the contract number, NAWC CAGE, and part number as directed by associated technical drawings. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA packaging guidelines and no special marking codes applied. Delivery is FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination point, and no variance in quantity is permitted. The contract is issued under solicitation SPE7M2-26-T-5764 with a response deadline in August 2026 and requires compliance with DoD unit of issue standards and transportation requirements outlined in DLAD Procurement Notes C19 and C20.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 15 hours ago

DEADLINE

ROLLER, ROLLER FAIRLThis contract specifies the procurement of a ROLLER, ROLLER FAIRLEAD identified by NSN 3815-01-341-5035 and part number 6550C028-1 under solicitation SPE7M2-26-T-5766, with a delivery requirement of 61 units to be shipped FOB origin within 178 days from the contract award. All items must comply with stringent DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, including contract number, NAWC CAGE, and part number markings unless superseded by technical drawings. Quality compliance is governed by QAP EQ003 and referenced technical requirements from the DLA Master List, with inspection and acceptance performed at origin using zero-defect sampling per MIL-STD-1916 or ASQ H1331 unless otherwise directed, assigning verification levels VII, IV, and II for critical, major, and minor attributes respectively. The material is designated as a critical application item and must adhere to NAVAIR aircraft launch and recovery equipment traceability standards, with strict prohibitions against intentional addition of mercury or mercury-containing compounds except in specified functional applications such as batteries, fluorescent lamps, sensors, or chemical reagents, which must include secondary containment as per NAVSEA 5100-003D. The delivery destination is clearly defined as Tracy, CA, with packaging and palletization governed by DLA standards and transportation logistics outlined in DLAD proc notes C19 and C20. The contract enforces a zero variance in quantity, with no tolerance for over or under shipment, and requires full conformity to all referenced technical data packages and quality assurance provisions.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

SWITCH, TOGGLEThe contract centers on the procurement of a SWITCH, TOGGLE item identified by NSN 5930008786734 and part number MS24659-22D, with technical compliance governed by MIL-DTL-3950L Rev L and NAS MS24659J Rev J, both effective as of 2022 and 2024 respectively. Full and open competition applies, and all supplies must adhere to DLA’s Master List of Technical and Quality Requirements, with packaging and marking strictly following MIL-STD-2073-1E and MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses in specific components such as batteries, fluorescent lamps, sensors, weapon systems, or chemical reagents as defined by NAVSEA, with portable devices containing mercury required to have shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The item is classified as a critical application item, and packaging must comply with RP001 DLA Packaging Requirements, including palletization standards and hazard material shipping protocols under IP025. Two delivery lines are specified: one for five units at $5.00 each and another for 68 units at $68.00 each, totaling 73 units, with delivery required within 11 days FOB origin to designated DLA distribution centers in Albany, Georgia, and New Cumberland, Pennsylvania. Inspection and acceptance occur at destination, with zero variance allowed on quantity. The need ship dates are August 18, 2026, and September 7, 2027, though the original required delivery date is March 20, 2027. All documentation references DoD unit of issue standards via a published DLA Excel file, and the solicitation number is SPE7M2-26-T-5761, issued under the Department of Defense with a response deadline of August 6, 2026.

Other Electronic Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

WASHER, FLATThis contract specifies the procurement of flat washers identified by NSN 5310-01-390-5131 and part number NAS1149F0432P, with a total quantity of 1,385 units distributed across three line items, all to be delivered FOB origin within 86 days of ordering. The item is classified as a commercial item and must comply with stringent technical and quality requirements referenced from the DLA Master List, including MIL-STD-130N for identification marking, MIL-STD-129 for packaging labeling, and MIL-STD-2073-1E for preparation for shipment. Sampling and inspection adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical attributes are subject to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Thread dimensions for class 3A and 3B threads must conform to System 22 of FED-STD-H28/20, excluding small threads. The washer is designated a critical application item requiring critical item source inspection. Mercury and mercury-containing compounds are strictly prohibited unless exempted for specified functional uses such as batteries, instruments, or sensors as outlined in NAVSEA standards. Packaging must meet DLA’s specific requirements including palletization, unit containment, and special marking code 00 indicating no special markings. Shipments are directed to three distinct DLA distribution facilities in Oklahoma, California, and Pennsylvania, with required delivery dates spanning from early 2026 through early 2027. The contract also enforces Cybersecurity Maturity Model Certification Level 2 self-assessment and incorporates Covered Defense Information requirements, ensuring compliance with DoD cybersecurity protocols. All units of issue comply with DoD standards and are cross-referenced to ANSI X12 equivalents.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

BOLT, SPECIALThis contract pertains to the procurement of a specialized bolt designated as NSN 5306-01-111-6010 for use in Aircraft Launch and Recovery Equipment (ALRE), classified as a Critical Application Item requiring strict traceability and source approval. The item must be manufactured by an approved source as determined by the Naval Air Warfare Center Aircraft Division at Lakehurst, with offerors required to submit documentation such as a source approval letter from NAVICP or equivalent evidence of compliance. Serialization is mandatory for both the part and its packaging to ensure full traceability throughout its lifecycle, including scrappage, and any re-branding that obscures original OEM markings is prohibited. The contractor must adhere to DLA packaging standards (MIL-STD-2073-1E and RP001), mark all units per MIL-STD-129 with NSN, contract number, lot and serial numbers, contractor and manufacturer CAGE codes, and part number, and comply with configuration change management and inspection protocols at origin. All supplies must meet SAE AS9100 quality requirements and NAVAIR ALRE traceability standards, with technical and quality requirements referenced from the DLA Master List, and documented through specified CDRLs including First Article Testing, Production Test and Inspection Reports, and Certificate of Quality Compliance. Mercury and ozone-depleting chemicals are strictly prohibited unless explicitly exempted, and all bare items must be marked per technical drawings with the contract number, NAWC CAGE code, and part number. The contract mandates a firm fixed price with no tolerance for quantity variance, a delivery deadline of 729 days after delivery order, and inspection and acceptance at origin. A small business set-aside applies, and the supplier must comply with all applicable DLA clauses, including those governing data handling under RD003, while explicitly excluding the Certificate of Conformance clause. The end-user requires the item for use by the Nuclear Reactor Program with a scheduled ship date of July 20, 2028.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 15 hours ago

DEADLINE

ANODE ASSYThe contract pertains to the procurement of an ANODE ASSEMBLY with NSN 1710-00-573-7197, requiring 377 units under purchase request 7017601770, with delivery due within 144 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition type. Packaging must adhere to DLA standards, and the item is subject to Covered Defense Information regulations. The supplier must be certified at CMMC Level 2 by an accredited third-party assessor. Any configuration changes require formal engineering change proposals, and non-accepted supplies must have government identification removed. Technical data associated with the item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons even within the United States, with DFARS 252.225-7048 governing compliance. Access to controlled data is limited to contractors certified under the US/Canada Joint Certification Program, who have completed DLA-mandated training and questionnaire, and received formal approval. The procurement is issued under solicitation SPE7M2-26-T-5765, posted July 26, 2026, with responses due August 6, 2026, classified under NAICS 336413, performed in San Diego, California, and managed by the Department of Defense’s Nuclear Reactor Program with primary point of contact Alisha Blanton.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 15 hours ago

DEADLINE

HOSE ASSEMBLY, NONMETALThis contract specifies the procurement of a nonmetallic hose assembly identified by NSN 4720-00-204-2092, with a quantity of 39 units to be delivered FOB origin within 309 days of contract award, targeting a shipment date of June 12, 2027, and an original delivery deadline of June 23, 2027. The item is classified as a Critical Application Item and must comply with stringent technical and quality standards, including SAE AS629D and SAE AS604, and must be sourced exclusively from manufacturers or assemblers listed on the Performance Review Institute’s Qualified Manufacturer List or Qualified Products List. Supply chain traceability is mandatory under DLA Procurement Note C03, and all components must be permanently marked with the contract number, NAWC CAGE, and part number per technical data drawings, with marking conforming to MIL-STD-129 and MIL-STD-130N for U.S. military property identification. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with shelf-life requirements enforced via a non-extendable 120-month expiration period, clearly marked on all packaging levels. The product is prohibited from containing ozone-depleting chemicals, mercury or mercury-containing compounds except in narrowly defined functional exceptions approved by NAVSEA, and no mercury may be used in preservation, packaging, or marking. Cybersecurity compliance is required at CMMC Level 2, and the contractor must retain all supply chain documentation. The item is subject to inspection and acceptance at destination, with zero variance allowed in quantity, and all data must align with the referenced technical documentation and DLA master requirements, which are incorporated by reference and continuously updated per applicable revision dates.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 15 hours ago

DEADLINE

CONNECTOR BODY, RECEPTAThis contract specifies the procurement of 422 electrical connector bodies, receptacles, identified by NSN 5935-01-231-8432, for delivery to Robins Air Force Base, Georgia, with a required delivery date of March 20, 2027, and a lead time of 168 days. The item is designated as a commercial item and must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking required. Packaging must be palletized in accordance with DLA guidelines, and the units must be shipped FOB origin with zero variance in quantity. The contract prohibits the intentional addition of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lights, sensors, controls, weapon systems, and approved chemical reagents; portable devices containing mercury must include a secondary containment and meet shock-proof standards per NAVSEA 5100-003D. The connector is classified as a critical application item and is sourced from approved manufacturers including Boeing, Lockheed Martin, Northrop Grumman, L3Harris, Honeywell, and TE Connectivity, each using their respective part numbers. Compliance with the DLA Master List of Technical and Quality Requirements is mandatory, and the controlling revision is determined based on the solicitation issue date. Transportation and shipping instructions follow DLAD Proc Notes C19 and C20, with the final delivery point specified as DLA Distribution Warner Robbins. The solicitation was issued under contract number SPE7M2-26-T-5763 with a response deadline of August 6, 2026, and is managed by the Department of Defense under NAICS code 334417.

Electronic Connector Manufacturing

POSTED

about 15 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRIThis contract is for the procurement of electrical plug connectors, identified by NSN 5935-01-092-1035 and part number MS3476W14-5S, meeting the technical standards of MIL-DTL-26482J and MS3476G. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935, and must be marked with an acceptable manufacturer part number listed on the QPL at the time of award. Each package must include a notice instructing the user to obtain a backsHELL separately, specifying the approved NSNs and part numbers for straight and right-angle cable clamp styles. The connector is designated as a critical application item, and no intentional addition or direct contact with mercury or mercury compounds is permitted except for specific exempted applications such as batteries, lighting, instruments, sensors, or weapon systems, with additional containment requirements for portable devices containing mercury. The contract specifies three separate delivery lines totaling 528 units, each with identical technical and packaging requirements under MIL-STD-2073-1E and MIL-STD-129 marking standards, using unit packaging code U and palletization per DLA guidelines. Deliveries are FOB origin with zero quantity variance allowed, inspected and accepted at the destination. Shipments must be sent to three different DLA distribution centers located at Tinker AFB, Robins AFB, and New Cumberland, with distinct need ship dates ranging from mid-2026 to mid-2027 and a 77-day delivery window. The contract mandates full and open competition, prohibits hazardous material exceptions beyond defined exemptions, and references the DLA Master List of Technical and Quality Requirements for all incorporated specifications, with all packaging, labeling, and shipping strictly aligned with DLA procurement directives and transportation protocols.

Electronic Connector Manufacturing

POSTED

about 15 hours ago

DEADLINE

COMPUTER SUBASSEMBLThis contract specifies the procurement of 92 units of a computer subassembly identified by NSN 7050-01-505-2960 under solicitation SPE7M2-26-Q-0680, with a firm fixed price and zero tolerance for quantity variance. Delivery is required within 150 days after order date, with inspection and acceptance occurring at the destination. The item is subject to stringent packaging requirements per MIL-STD-2073-1E and DLA packaging standards, including specific methods for preservation, wrapping, and unit containerization, and must be marked in accordance with MIL-STD-129 without special marking codes. Mercury and mercury-containing compounds are strictly prohibited in incidental contact with the hardware, except for exempted functional uses such as specified batteries, fluorescent lamps, sensors, or weapon systems, with portable mercury-containing devices requiring shock-proof construction and secondary containment as defined by NAVSEA 5100-003D. The contract excludes any government identification from non-accepted supplies and is classified as a critical application item with two specific part numbers identified. The delivery point is the DLA Distribution San Joaquin warehouse in Tracy, California, and the item is subject to DLA transportation procedures C19 and C20. The contract is a total small business set-aside under NAICS code 334111, with performance under the Department of Defense’s Nuclear Reactor Program and a response deadline of August 6, 2026.

Electronic Computer Manufacturing

POSTED

about 15 hours ago

DEADLINE

Supply of Locking Devices for Circuit BreakersThe contract pertains to the manufacture and delivery of three locking devices for circuit breakers identified by NSN 5925-01-453-6631, specifically designed for use in nuclear reactor program applications. These devices must meet rigorous technical specifications and comply with all Department of Defense standards for packaging, hazard labeling, and quality assurance to ensure operational integrity and safety in sensitive nuclear environments. The work is being procured as a subcontract under the NUCLEAR REACTOR PROGRAM, part of the Department of Defense, with performance required at New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on July 24, 2026, with a deadline for responses set for July 29, 2026, indicating a tightly controlled procurement timeline. The North American Industry Classification System code 335313 applies, referencing the manufacturing of electrical equipment for power distribution. The contract emphasizes strict adherence to defense logistics agency requirements, ensuring that the locking devices are not only functionally suitable for high-stakes nuclear applications but also properly documented and labeled to meet federal safety and handling protocols.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE