Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Electrical Insulation Tape Manufacturing & Supply

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture and supply of 75,267 rolls of military-spec electrical insulation tape, identified by NSN 5970-00-949-4846, to meet stringent defense standards. All units must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking to ensure proper handling, storage, and identification throughout the supply chain. Each roll is required to have a minimum 12-month shelf life from the date of manufacture, ensuring operational readiness upon delivery. Origin inspection is mandated to verify compliance with quality and sourcing requirements, reinforcing the integrity of the supply chain. The contract is classified as a subcontract under NAICS code 335932 and is administered by the Defense Logistics Agency under the Department of Defense, with performance and delivery obligations aligned to federal defense logistics protocols.

General Info

75,267 military-spec insulation tape rolls, compliant with MIL-STDs, 12-month shelf life, DLA-administered subcontract.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

335932 - Noncurrent-Carrying Wiring Device Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A626F253V.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TAPE, INSULATION, ELECTRICAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 75,267 rolls of military-spec electrical insulation tape (NSN: 5970-00-949-4846) with compliance to MIL-STD-2073-1E packaging and MIL-STD-129 marking standards, 12-month shelf life, and origin inspection.

Similar Contracts

Same NAICS industry code

Manufacturing of Special Purpose Electrical Insulation Sleeving (NSN 5970-01-552-7865)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Supply of Electrical Plug Connectors (Insulator Bushings)This subcontract involves the procurement or manufacture of 210 electrical plug connector insulator bushings for the DLA Weapons Support Active Devices Division. The required items must match NSN 5935-14-529-4062 and part numbers 91777152 or 96139404AA, adhering strictly to Critical Application Item quality standards. Performance for this contract will take place in Jacksonville. Eligible providers must maintain an active CAGE code and SAM registration to participate. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026. This requirement falls under NAICS code 335932 and supports prime contractors delivering essential components to the Department of Defense.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

MIL-SPEC Electrical Wire Supplier (NSN 6145-00-229-9862)

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 10 hours ago

DEADLINE

CONNECTOR, PLUG, ELECTRI

Solicitation # SPE7M5-27-Q-0101

Solicitation SPE7M5-27-Q-0101 is a small business set-aside request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 210 electrical plug connectors, identified by NSN 5935-14-529-4062. Although described as a connector, the correct nomenclature is insulator, bushing. The requirement specifies two approved part numbers: PN 91777152 for the French Navy and PN 96139404AA for the US Navy. This is designated as a critical application item with a delivery timeline of 251 days after receipt of order. The contract stipulates FOB origin shipping with inspection and acceptance occurring at the destination, specifically DLA Distribution Jacksonville. Packaging must adhere to MIL-STD-129 for marking and RP001 for palletization, with specific requirements for hazardous materials under FED-STD-313 and IP025 or commercial packaging via ASTM D3951 for non-hazardous items. Quality assurance will be managed through sampling plans such as MIL-STD-1916 or MIL-STD-105/ASQ Z1.4. Award will be based on best value, evaluating price, offered delivery, and past performance. Invoicing must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 10 hours ago

DEADLINE

INSULATION SLEEVING

Solicitation # SPE4A6-27-T-7427

Solicitation SPE4A6-27-T-7427 is issued by the Defense Logistics Agency Weapons Support ASC Commodities Division for the procurement of insulation sleeving, identified by NSN 5970-01-717-4313. The requirement consists of three line items, each for a quantity of one unit, with a delivery lead time of 20 days after receipt of order. Delivery is specified as FOB Destination to the USS The Sullivans (DDG 68). Inspection and acceptance will also occur at the destination, with quality sampling conducted according to MIL-STD-1916 or ASQ H1331. The contract incorporates stringent technical and security requirements, including CMMC Level 2 certification and compliance with ITAR and EAR export controls. Packaging must adhere to MIL-STD-2073-1E and DLA requirement RP001, while marking must follow MIL-STD-129. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to the Buy American Act and Berry Amendment. Offerors must submit quotes through the DIBBS portal and maintain current representations in the System for Award Management.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-27-T-7458

Solicitation SPE4A6-27-T-7458 is a federal procurement issued by the DLA Weapons Support ASC Commodities Division for the supply of 1,122 units of special purpose electrical insulation sleeving, identified by NSN 5970-01-552-7865. The contract is established as a fixed-price agreement with delivery required by April 6, 2027, and a delivery lead time of 151 days. Shipping is designated as FOB Origin, with the final destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The procurement is subject to rigorous quality and technical standards, including compliance with Basic Drawing NR 06090 202D211 Revision N2 and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for the removal of government identification from non-accepted supplies. The award process may utilize automated award capabilities and provides a price evaluation preference for certified HUBZone small businesses, while explicitly prohibiting the use of additive manufacturing for the produced items. Administrative requirements include electronic invoicing and receiving through the Wide Area WorkFlow system. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and strict prohibitions on covered defense telecommunications equipment. Additionally, the contractor must comply with NIST SP 800-171 for safeguarding covered defense information and adhere to hazardous material identification and safety data standards.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE4A7-27-T-2305

Solicitation SPE4A7-27-T-2305, issued by the DLA Weapons Support ASC Supplier Oper AE and AF Div, is for the procurement of 100 units of cable hangers under NSN 5975016207736. The requirement is designated as a critical application item and is associated with General Dynamics Mission Systems part numbers 02-2805803 and 82-2810739-2. Delivery is required within 50 days after order, with a need ship date of November 5, 2025, and an original required delivery date of September 22, 2025. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List Technical and Quality Requirements, which take precedence over ASTM D3951 for non-hazardous commercial packaging. Hazardous materials must be packaged per TQ requirement IP025 and labeled according to the Hazard Communication Standard. All packaging must comply with MIL-STD-129 and RP001 for palletization. Quality assurance will be managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Additionally, the award process incorporates a HUBZone price evaluation preference and strictly prohibits the use of additive manufacturing for the supplied items.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 10 hours ago

DEADLINE

MIL-Spec Cordage and Wire SupplyThis subcontract opportunity is for the supply of specialized military-grade electrical cordage to support prime contractors working with the DLA Weapons Support Active Devices Division. The required materials must adhere to MIL-C-83501 specifications, specifically focusing on red and green wires with white stripes that are engineered to withstand 200,000 flexes. Deliverables include high-flex insulated wiring provided in either spools or pre-cut lengths. The procurement is designated as a Total Small Business Set-Aside under NAICS code 335932. Interested parties must submit their responses by November 12, 2026, to provide these critical components for Department of Defense projects.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Supply of Lever Switch (NSN 5930-01-300-7642)This subcontract involves the supply of a specific lever switch, identified by NSN 5930-01-300-7642, for prime contractors working on DLA Weapons Support projects. The scope of work includes the delivery of one unit of the hardware and the development and submission of technical data packages to facilitate alternate part evaluations. The contract is managed under the Department of Defense through the DLA Weapons Support Electrical Devices Division. To ensure successful execution and payment, the contractor must be registered in both the System for Award Management and the Wide Area Workflow for invoicing and receiving purposes. The performance of this contract is designated for FPO 96686, and it falls under NAICS code 335932.

DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Manufacturer of Electrical Insulation Sleeving (NSN 5970-01-709-0765)This subcontract involves the manufacture and supply of 18 units of electrical insulation sleeving (NSN 5970-01-709-0765) for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Production must strictly adhere to TDP Rev B Gen 3, specifically basic drawing 19207 12601056 Revision A and reference drawing 19207 12601056-020. Delivery is required FOB Origin, with packaging and marking compliant with MIL-STD-2073-1E and MIL-STD-129 standards. To qualify for this project, the contractor must possess CMMC Level 2 certification and be part of the US/Canada Joint Certification Program to ensure authorized access to ITAR and EAR regulated data. The work is categorized under NAICS code 335932 and will be performed in New Cumberland. Interested parties must respond by the deadline of November 4, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-27-T-7084

Solicitation SPE4A6-27-T-7084 is a request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 18 units of electrical insulation sleeving, identified by NSN 5970-01-709-0765. The requirement specifies adherence to TDP Rev B Gen 3 per basic drawing 19207 12601056 (Revision A) and reference drawing 19207 12601056-020. Delivery is required by June 2, 2027, with a delivery lead time of 209 days ADO. The items are to be shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract includes stringent compliance requirements, including CMMC Level 2 certification and the necessity for an approved US/Canada Joint Certification Program certification to access export-controlled technical data subject to ITAR or EAR. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA requirement RP001. Offerors must provide a Safety Data Sheet prior to award to avoid being deemed nonresponsible. Evaluation preferences are available for HUBZone Small Business Concerns, and the buy is identified as a candidate for automated award. Invoicing and payment will be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

DISTRIBUTION BOX

Solicitation # SPE7M0-27-T-0789

Solicitation SPE7M0-27-T-0789 is issued by the Defense Logistics Agency (DLA) Weapons Support Maritime Supply Chain for the procurement of one distribution box, identified by NSN 6110-99-459-9801 and part number MUA7407080 (Hiab Limited U5503). The requirement is for a single unit with a delivery timeframe of five days after order, and an original required delivery date of October 27, 2026. The item is to be delivered FOB Origin to the 0087 CS BN CO A Composite at Fort Stewart, Georgia, with both inspection and acceptance occurring at the destination. The contractor must adhere to strict packaging and marking standards, specifically ASTM D3951 and MIL-STD-129, while ensuring palletization complies with DLA requirement RP001. Technical and quality requirements from the DLA Master List, including RA001 and RQ011, take precedence over other packaging standards. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. The solicitation is subject to various federal regulations, including the Buy American Act, Berry Amendment, and DFARS cybersecurity and hazardous material reporting requirements. Quotations are due by November 9, 2026, via the DIBBS portal.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

MIL-STD Packaging and Logistics ServicesThis subcontract for MIL-STD Packaging and Logistics Services supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves providing specialized military-grade packaging and palletization services, ensuring all items are processed according to MIL-STD-129, RP001, and ASTM D3951 standards. The provider must utilize compliant labeling and industrial equipment to deliver shipments that are fully prepared for FOB Origin transport. The project is managed under NAICS code 561910 for the Department of Defense and will be performed in Phoenix, Arizona. Interested parties should note the response deadline of November 9, 2026, for this specific logistics requirement.

Packaging and Labeling Services

POSTED

about 10 hours ago

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)This subcontract involves the procurement of 589 safety cones to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for manufacturing or sourcing cones identified by NSN 6250-00-334-6183, ensuring all materials strictly adhere to the DLA Master List of Technical/Quality requirements and comply with the Buy American Act. The completed order of 589 safety cones must be delivered FOB Origin to Phoenix, Arizona. This requirement falls under NAICS code 339999 and is managed by the Department of Defense for the Defense Logistics Agency.

All Other Miscellaneous Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Toggle Switches (NSN 5930-00-655-1507)This subcontract involves the supply of 11 toggle switches for prime contractors supporting Defense Logistics Agency contracts. The switches must strictly adhere to NSN 5930-00-655-1507 specifications, with a specific prohibition against the use of additive manufacturing. All items must be delivered FOB Destination and must comply with packaging and marking standards established by MIL-DTL-28786, MIL-STD-129, and RP001. The contractor is required to maintain rigorous cybersecurity and data protection standards, specifically ensuring compliance with NIST SP 800-171 and DFARS 252.204-7012. This procurement falls under NAICS code 334419 and is managed through the Department of Defense.

Other Electronic Component Manufacturing

POSTED

about 10 hours ago

DEADLINE

Domestic Electrical Component Supply (Berry Amendment Compliant)This subcontract involves the supply of raw wire, connectors, shielding, and housing for prime contractors working on Defense Logistics Agency procurement projects specifically for NSN 5995-01-696-1261. The provider is responsible for sourcing electrical grade materials that meet strict technical requirements and must include a Certificate of Conformance with all delivered components. A critical requirement of this agreement is the provision of certification of origin to ensure full compliance with the Buy American Act and the Berry Amendment. Managed under NAICS code 335131 for the Department of Defense, the contract ensures that all domestic electrical components meet the necessary federal standards for military application.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 10 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication and assembly of a special purpose electrical cable assembly, specifically NSN 5995-01-696-1261, for prime contractors working on Defense Logistics Agency procurement projects. The manufacturer is required to produce one completed, tested, and packaged assembly in strict accordance with the DLA Master List of Technical and Quality Requirements (RA001), with a specific prohibition against the use of additive manufacturing. All deliverables must be packaged and marked according to MIL-STD-129 and MIL-STD-2073-1E standards. This opportunity falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties must respond by November 5, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supplier of Flat Washers (NSN 5310-01-097-9936)This subcontract involves the procurement of 109 specialized flat washers to support Defense Logistics Agency aircraft component projects. The supplier is responsible for manufacturing or sourcing the components in strict accordance with Sikorsky Aircraft Corporation part number SS5104-01 and NSN 5310-01-097-9936. All items must be delivered to DLA Distribution DDSP New Cumberland. The contract mandates rigorous adherence to quality and regulatory standards, including compliance with the Buy American Act and the Berry Amendment. Packaging must meet ASTM D3951 specifications, while marking and palletization must follow MIL-STD-129 and RP001 guidelines. The opportunity falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 10 hours ago

DEADLINE

Military-Spec Packaging and International Shipping (Guam)This subcontract through the Defense Logistics Agency involves specialized military packaging, marking, and international transportation services for prime contractors delivering supplies to Guam. The scope of work specifically requires the packaging of mufflers in accordance with ASTM D3951, marking per MIL-STD-129, and palletization following RP001 requirements. The selected provider must utilize the fastest traceable shipping methods to ensure delivery to the MESG One Detachment in Guam. This opportunity falls under NAICS code 488330 and is managed by the Department of Defense.

Navigational Services to Shipping

POSTED

about 10 hours ago

DEADLINE

Exhaust Muffler Supply (NSN 2990-01-566-4579)This subcontract involves the manufacture or procurement of one specialized exhaust muffler, identified by NSN 2990-01-566-4579, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The provider must ensure the product complies with DLA Master List of Technical and Quality Requirements RA001 and RQ011, while maintaining strict supply chain traceability documentation as specified in the contract terms. Managed under NAICS code 336390 for the Department of Defense, the agreement requires the delivery of a single completed unit. The solicitation was posted on October 28, 2026, with a response deadline set for November 4, 2026.

Other Motor Vehicle Parts Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Sleeve Spacers (NSN 5365-01-566-4847)This subcontract involves the manufacture or sourcing of four sleeve spacer units, identified by NSN 5365-01-566-4847, to support prime contractors under a Defense Logistics Agency supply contract. The selected provider must ensure all materials comply with the Buy American Act and the Berry Amendment. Final delivery of the units is required at Fort Bragg, North Carolina. Strict adherence to technical specifications is mandatory, including packaging according to ASTM D3951, labeling per MIL-STD-129, and palletization following RP001 standards. The opportunity falls under NAICS code 332721 and is managed through the Department of Defense.

Precision Turned Product Manufacturing

POSTED

about 10 hours ago

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 10 hours ago

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)This subcontract involves the supply of refractory castable mix to prime contractors supporting Defense Logistics Agency contracts for the USS George H W Bush and USS Abraham Lincoln. The provider is responsible for manufacturing or sourcing material that meets NSN 9350015694317, with strict requirements for packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and the Hazard Communication Standard. The scope of work requires the delivery of two units of castable mix on a FOB Destination basis. This procurement falls under NAICS code 327120 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

Clay Building Material and Refractories Manufacturing

POSTED

about 10 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A6-26-T-04ZD

Defense Logistics Agency

POSTED

DEADLINE

CABLE ASSEMBLY, SPEC

Solicitation # SPE4A626F1430

Defense Logistics Agency

POSTED

DEADLINE

CABLE ASSEMBLY, RADI

Solicitation # SPE4A626F253D

Defense Logistics Agency

POSTED

DEADLINE

Supply of Junction Box Covers (NSN: 5975015700822)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Insulation Sleeving Manufacturing and Supply

ASC COMMODITIES DIVISION

POSTED

CLOSED

Wiring Harness Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Electrical Insulation Tape Manufacturing and Supply

ASC COMMODITIES DIVISION

POSTED

CLOSED

Electrical Insulation Tape Supply

Defense Logistics Agency

POSTED

DEADLINE

Supply of Electrical Insulation Tape (NSN 5970-01-588-5080)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Electrical Insulation Sleeving Manufacturing

ASC COMMODITIES DIVISION

POSTED

CLOSED

Supply of Metal Rigid Conduit (Electrical Fittings)

Defense Logistics Agency

POSTED

DEADLINE

Qualified Manufacturer of Insulation Sleeving (NSN 5970016681760)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS