Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Electrical Power Cable Manufacturing and Supply

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture and supply of 1,500 feet of military-spec electrical power cable in continuous length, with a tolerance of ±5%, fully compliant with NEMA WC 27500-2025 and all associated defense standards. The cable must meet rigorous performance, environmental, and safety requirements dictated by military specifications to ensure reliability in critical defense operations. The product is to be delivered to Robins AFB, Georgia, with a zip code of 31098-1887, serving as the sole place of performance for this subcontract. This solicitation, classified under NAICS code 335921 for other electrical equipment and component manufacturing, is issued by the Department of Defense under the Maritime Supply Chain organization. The request for quotation is open for responses until August 14, 2026, with the solicitation posted on August 3, 2026. The contract type is a subcontract, and no set-aside provisions apply, meaning all eligible manufacturers may bid without restriction based on business size or ownership. All technical, delivery, and compliance obligations must be fulfilled as outlined in the referenced defense standards, and prospective vendors are directed to the DIBBS portal for full solicitation details.

General Info

Supply 1,500 feet of military-spec power cable to Robins AFB, compliant with NEMA WC 27500-2025, by August 14, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335921 - Fiber Optic Cable ManufacturingView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Manufacture and supply of 1,500 feet (±5%) of military-spec electrical power cable in continuous length, compliant with NEMA WC 27500-2025 and associated defense standards.

Similar Contracts

Same NAICS industry code

NAICS: 335921
New
DIBBS
Electrical Wire Supply (Copper Conductor, Continuous Length)The contract involves the supply and delivery of 500-foot spools of electrical wire with a copper conductor, meeting federal and military specifications, including the National Stock Number 6145-01-469-3805, with a strict requirement for continuous-length wiring without splices or joints. The wire must comply with all applicable technical and quality standards mandated by military and federal regulations to ensure performance and reliability in critical applications. The procurement is structured as a subcontract under NAICS code 335921, indicating it pertains to the manufacturing of other electrical equipment and components, and is being managed by the Department of Defense through its Maritime Supply Chain ESOC Buys division. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and the place of performance is specified as Jacksonville with a ZIP code of 28545-6070. Although the solicitation number is not provided, the procurement is accessible via the DIBBS platform for vendor submission and tracking. The contract does not specify any set-aside preferences or designated small business classifications, and there is no listed point of contact for inquiries. Vendors must ensure full compliance with the technical requirements and delivery schedule to meet the operational needs of the end user within the Department of Defense supply chain.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 335921
New
DIBBS
CABLE ASSEMBLY, FIBE
Solicitation # SPE4A0-26-T-4153
The contract pertains to the supply of 30 units of a fiber optic cable assembly with part number 7348668G59 and NSN 6020015211052, sourced under solicitation SPE4A0-26-T-4153. Delivery is required within five days of award, FOB origin, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application item and must comply with stringent technical, quality, and security standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-1916 sampling protocols with zero non-conformances permitted unless otherwise stated. The supply must adhere to MIL-STD-2073-1E preservation and MIL-STD-129 marking standards, with packaging and palletization following DLA-specific requirements and prohibiting any mercury or mercury compounds in preservation, packaging, or marking. The contract enforces CMMC Level 2 compliance, requires IUID labeling per MIL-STD-130 and DFARS 252.211-7003, and prohibits intentional use of mercury except in narrowly defined functional applications such as specific batteries or sensors, which must include secondary containment. Transportation instructions specify shipment to Norfolk Naval Air Terminal under RDD 999/NMCS guidelines, with the original required delivery date set for July 27, 2026, and the point of contact is Danita Davis of DLA.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

2 days ago

DEADLINE

in 6 days
View Details
NAICS: 335921
New
Federal
Fiber Optic Cable & Wires
Solicitation # WX03406Y2026T
FEMA Region 1, under the Department of Homeland Security, is soliciting Fiber Optic Cable & Wires for its Federal Regional Center located at 63 Old Marlboro Rd, Maynard, MA, under solicitation number WX03406Y2026T. This is a Small Business Set-Aside with the NAICS code 335921, meaning only small businesses are eligible to respond, and the solicitation requires full compliance with SAM registration, including submission of a Unique Entity Identifier (UEI) and CAGE code. Offers must be submitted via email no later than 4:00 PM ET on Thursday, August 6, 2026, to the designated points of contact, and the delivery of all supplies must be completed within 90 days of contract award. The contract is intended to be awarded on a Lowest Priced Technically Acceptable basis, meaning technical acceptability is a mandatory pass/fail threshold, and among those who meet the minimum specifications outlined in the Statement of Work, the lowest price will prevail. Accepted items include specific quantities of 24-fiber OM4 armored outdoor cable, 18/6C shielded communication cable, fiberglass and polyester pull tape, and intrusion tamper switches, with no alternative standards cited beyond general federal compliance requirements. The Government will inspect and accept delivered goods only at the delivery destination, and payment is contingent upon formal acceptance. Clause 52.212-4 governs the terms and conditions, with a deviation noted, and the contract incorporates stringent security and compliance requirements under FAR 52.240-90 and 52.240-91, prohibiting the use of covered telecommunications equipment and services from restricted vendors such as Kaspersky Lab, and requiring strict adherence to OFAC sanctions regarding Sudan and Iran. Contractors must also certify they do not conduct restricted business operations in those regions and must report any identified non-compliant items within 72 hours. Flow-down clauses require these requirements to extend to all subcontractors, and failure to comply may disqualify a proposal or result in contract termination. No pricing data is provided in the solicitation, and the contract value remains unspecified, though all submissions must include a fully itemized quote. Packaging, marking, and preservation requirements reference manufacturer CAGE codes, model numbers, and OEM identifiers but do not specify adherence to MIL-STDs. The contract explicitly prohibits use of artificial intelligence as defined under federal statute
Region 1

POSTED

2 days ago

DEADLINE

in about 21 hours
View Details
NAICS: 335921
New
DIBBS
CABLE ASSEMBLY, FIBE
Solicitation # SPE7M1-26-T-240E
This contract obligates the supplier to deliver two units of a fiber optic cable assembly identified by NSN 6020-01-692-6310 and part number 6877804-14, with a total price of $2.00 per unit, to be delivered FOB destination within 20 days of contract award. The item must comply with all applicable technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including packaging per MIL-DTL-12000 and handling requirements under MIL-STD-2073-1E and MIL-STD-129 for marking and preservation. Packaging must ensure physical protection using Method 10, with cable ends secured by a neutral wrap of at least four inches, and cables must be mounted on spools or reels with a minimum six-inch diameter; shorter lengths must be coiled with a minimum six-inch center radius and secured at three points. The entire shipment must be enclosed in a compliant box meeting PPP-B-566, PPP-B-676, or ASTM-D5118 specifications with adequate cushioning and proper closure. No mercury or mercury-containing compounds may be introduced in or in contact with the item, except for specified functional uses in batteries, lighting, sensors, or weapon systems as defined by NAVSEA, and any portable items containing mercury must have shockproof construction with a secondary containment barrier. All packaging and markings must adhere strictly to MIL-STD-129, and the delivery destination is the USS JOHN S MCCAIN DDG 56 at FPO AP 96672, with additional shipment protocols governed by DLAD procedural notes C19 and C20. The contract specifies zero variance in quantity, with inspection and acceptance occurring at the delivery point, and references a required delivery date of May 28, 2024, under solicitation SPE7M1-26-T-240E.
MARITIME SUPPLY CHAIN

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 335921
New
DIBBS
CABLE, FIBER OPTIC
Solicitation # SPE7M2-26-T-5879
The contract specifies the procurement of fiber optic cable under NSN 6015-01-442-9423, with a total quantity of 4,117 measurement units, to be delivered FOB origin within 105 days of contract award. The item is classified as a commercial item and a critical application item, requiring strict adherence to technical specifications including MIL-PRF-85045/18D and MIL-PRF-85045H, with part number M85045/18-01P. Supply compliance with DLA packaging standards under MIL-STD-2073-1E and preservation under MIL-DTL-12000 is mandatory, along with marking per MIL-STD-129 and palletization per DLA requirements. The contractor must ensure no mercury or mercury-containing compounds are introduced unless explicitly exempted for specific functional components, and all mercury-containing devices must meet NAVSEA 5100-003D containment standards. Material from General Cable Industries with lot codes between 0117 and 0821 and trace code 382893.000 with lot code 0619 are prohibited. The contract enforces CMMC Level 2 self-assessment requirements and incorporates DLA’s Master List of Technical and Quality Requirements. Inspection and acceptance occur at origin with zero tolerance for quantity variance. Delivery is directed to DLA District San Joaquin in Tracy, California, with a required ship date of July 23, 2026, and original delivery deadline of February 25, 2027. The item is subject to Qualified Products List or Qualified Manufacturers List controls, and all shipments must comply with DLA transportation notes C19 and C20.
NUCLEAR REACTOR PROGRAM

POSTED

6 days ago

DEADLINE

in 5 days
View Details
NAICS: 335921
DIBBS
CABLE ASSEMBLY, FIBE
Solicitation # SPE7M1-26-T-238V
This contract is for a single unit of a fiber optic cable assembly designated as NSN 6020-01-540-9930 under solicitation SPE7M1-26-T-238V, with delivery required within 20 days to the USS BULKELEY DDG 84 at FPO AE 09565. The item is classified as a critical application component and must be furnished by approved suppliers including Lockheed Martin Corporation and NewVac, LLC using part number 7572110-629. Strict prohibitions ban the use of Class I ozone-depleting chemicals and intentional addition of mercury or mercury-containing compounds, except for specific functional uses like batteries, fluorescent lights, sensors, or naval-specified reagents. Any mercury-containing portable devices must include shock-proof construction and a secondary containment barrier per NAVSEA 5100-003D. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, using Method 10 for physical protection, with cable ends covered by neutral wrap and secured with tape. The cable must be wound on spools or reels of at least six inches in diameter, or coiled in a box meeting specified standards if not reel-compatible, with cushioning and proper bracing. All packaging must be marked in accordance with MIL-STD-129 and palletization must meet DLA procurement guidelines. The contract enforces zero variance in quantity and mandates inspection and acceptance at the destination. Technical and quality requirements are governed by the DLA Master List, and unit of issue conforms to DoD standards. The delivery deadline is June 18, 2026, with transportation details following DLAD procedural notes C19 and C20.
MARITIME SUPPLY CHAIN

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 335921
Federal
TELECOMMUNICATION CABLE SERVICES (FIBER/COPPER)
Solicitation # 70LGLY-SSB-RFI-CABLESERVICES
The solicitation seeks qualified vendors to provide comprehensive onsite telecommunications cable system support services for both inside plant and outside plant copper and fiber optic networks, serving Federal Law Enforcement Training Center locations in Artesia NM, Charleston SC, Cheltenham MD, and Glynco GA. The scope includes installation, maintenance, troubleshooting, testing, documentation, and lifecycle support for communication infrastructure encompassing cabling systems, communications rooms, handholes, manholes, and conduit networks that support critical voice, data, and network transport services. Vendors must demonstrate the capability to deliver mission-critical support in these geographically dispersed training facilities and understand the technical demands of maintaining both legacy and modern telecommunications infrastructure. All responses to this Request for Information are voluntary and at the respondent’s sole expense; the government will not reimburse any costs incurred during submission. Information provided will become the property of the government and will not be returned, and respondents must clearly mark any proprietary, restricted, or competitively sensitive data within their submissions. The RFI is not a solicitation for contracts but a means to identify capable sources for potential future procurement; non-response does not disqualify vendors from future opportunities. The solicitation number is 70LGLY-SSB-RFI-CABLESERVICES, with a response deadline of August 12, 2026, and is issued by the Federal Law Enforcement Training Center Glynco Procurement Office under the Department of Homeland Security. Primary and secondary points of contact are provided for inquiries, and NAICS code 335921 applies to this effort.
Fletc Glynco Procurement Office

POSTED

8 days ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 333912
New
DIBBS
SEAL ASSEMBLY, SHAFT, SP
Solicitation # SPE7M1-26-Q-1335
The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.
Air and Gas Compressor Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334511
New
DIBBS
INDICATOR, CARBON MONOX
Solicitation # SPE7M1-26-T-250G
This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334519
New
DIBBS
ALARM, GAS, AUTOMATIC
Solicitation # SPE7M1-26-T-250J
The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.
Other Measuring and Controlling Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M1-26-U-5053
The contract solicitation SPE7M1-26-U-5053 seeks the procurement of an electrical connector, receptacle, identified by NSN 5935015240367 and part number 2583A-125, under an indefinite-delivery contract structure with an estimated annual quantity of 11 units and a maximum contract value of $350,000. Deliveries are required FOB Origin with a 57-day lead time following award, and goods will be inspected and accepted at the destination point. All supplies must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-129 for labeling and marking, RP001 for palletization, and RA001 for technical specifications from the DLA Master List of Technical and Quality Requirements, which supersede commercial standards such as ASTM D3951. Hazardous materials, as defined by FED-STD-313, must be packaged under TQ requirement IP025 and labeled per OSHA’s Hazard Communication Standard, while non-hazardous items must meet commercial packaging standards unless overridden by DLA requirements. Physical identification of bare items is mandated under RQ017. The contract includes mandatory clauses related to employment equity, anti-trafficking, sustainable products, cybersecurity safeguards including NIST SP 800-171 and DFARS 252.204-7012, and prohibitions on covered defense telecommunications equipment. Payment will be processed exclusively via Wide Area WorkFlow using the Invoice and Receiving Report method, and all offers must be submitted electronically through the DIBBS portal by the August 20, 2026 deadline. The solicitation requires full compliance with Buy American provisions and mandates U.S.-flag vessels for ocean transportation unless waived. No unit price is listed in the CLIN, but the total estimated value is capped at $350,000, with award based on price and other factors, not as a strictly lowest price technically acceptable procurement. The contract is unilateral, allowing the Government to issue delivery orders under predetermined terms, and includes guaranteed minimum quantities. All representations and certifications by offerors remain unpopulated at the solicitation stage.
Electronic Connector Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333996
New
DIBBS
HOUSING SECTION, LIQ
Solicitation # SPE7M1-26-T-250A
This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.
Fluid Power Pump and Motor Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335311
New
DIBBS
COIL, ELECTRICAL
Solicitation # SPE7M1-26-T-250E
The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7M1-26-Q-1336
This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333998
New
DIBBS
FILTER ELEMENT, FLUID
Solicitation # SPE7M1-26-T-250B
This contract covers the procurement of a fluid filter element identified by NSN 4330012808418 and part number F64318, with approved suppliers including Falls Filtration Technologies Inc., Wix Corp, Honeywell International Inc, Donaldson Company Inc, and Genuine Parts Company. The item is classified as a critical application and must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. The unit of issue is each, with a contract quantity of two units to be delivered within 20 days from the award date, FOB origin, under Solicitation SPE7M1-26-T-250B. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling governed by these standards. Shipping must occur via the fastest traceable method, excluding parcel post, and all deliveries must be directed to the specified address at Aberdeen Proving Ground, Maryland. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The required delivery date is August 3, 2026, and the contract includes a government-only point of contact and tracking identifiers for logistics and accountability.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 12 days
View Details