Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical System Quality Control & Inspection

Active

State & Local

Response Deadline08/17/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for comprehensive quality control inspections of electrical systems in healthcare and other facilities to ensure strict adherence to safety and code requirements. Key tasks include performing grounding continuity tests that must meet a maximum resistance of 2 ohms and conducting receptacle pin retention checks requiring a minimum force of 115 grams to verify secure electrical connections. These inspections are critical for maintaining operational integrity and regulatory compliance in sensitive environments where electrical reliability directly impacts safety and functionality. The work is structured as a subcontract under NAICS code 541370 and is managed by AS-Procurement (AS-P) under the California agency. The solicitation was posted on July 13, 2026, with responses due by August 17, 2026. Performance location details are not specified, and no set-aside classification is indicated, leaving the opportunity open to eligible subcontractors who can demonstrate technical capability in electrical system verification and compliance testing.

General Info

Conduct electrical inspections with 2-ohm grounding and 115-gram pin retention tests for healthcare facilities under AS-P.

Agency

California → AS- Procurement (AS-P)View Agency

NAICS

541370 - Surveying and Mapping (except Geophysical) ServicesView NAICS

Place of Performance

CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 13

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 09:00:00 PM UTCin 28 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → AS- Procurement (AS-P)

ContactsNo contacts available

OfficeN/A

Organization / Agency

California → AS- Procurement (AS-P)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performing quality control inspections, grounding continuity tests (≤2 ohms), and receptacle pin retention checks (≥115g) in healthcare and other facilities to ensure code compliance.

Similar Contracts

Same NAICS industry code

Surveying and Site LayoutThe contract encompasses topographic surveys, boundary verification, and precise site layout services essential for supporting construction activities. These tasks are critical to ensuring accurate spatial data and legal boundary alignment prior to any ground-breaking or structural development. The work is conducted under a subcontract with the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 541370 for surveying and mapping services, indicating a specialized technical scope requiring licensed professionals and advanced geospatial technology. The contract was posted on July 20, 2026, and performance location details are not specified, suggesting the work may be required across multiple military or federal sites under the agency’s jurisdiction. No set-aside provisions or small business preferences are indicated, and the point of contact information is unavailable, though the contract can be referenced via the provided DIBBS link for official documentation and award details.

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

TCLP Metals Analysis (D004-11 & UHC Metals)

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Corrosivity Testing of Steel (D002)

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Surveying and Site Layout Services

Defense Logistics Agency

POSTED

about 10 hours ago

DEADLINE

Survey and Mapping Services IDIQThe Port of Seattle is seeking qualified firms or teams to provide Survey and Mapping Services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract, with solicitation details posted on July 20, 2026. All survey work must adhere strictly to designated geodetic datums: the Seattle-Tacoma International Airport Grid System or NAD83 for airport properties, and NAD83 or Seattle Tidelands for seaport properties. Vertical measurements must follow NGVD 29, STIA Vertical Datum, MLLW, or NAVD88 as specified, with any deviation requiring written approval from the Port Manager of Survey and Mapping. The work must comply fully with the Washington Administrative Code and Revised Code of Washington regarding the practice of land surveying, ensuring legal and technical accuracy across all projects. Consultants will operate under the supervision of the Port Manager of Survey and Mapping Services or their designated representative, delivering both field and office-based support services including on-site surveying and mapping. The contract is managed by the Port’s Construction Management division, with primary point of contact Hala Rabbo available via email and phone for inquiries, and Ann Davidson serving as Project Manager. Proposals are to be submitted in response to this forecasted opportunity, with performance expected across Port facilities throughout the region, though specific locations are not yet defined. All work must align with the Port’s established standards and regulatory frameworks to ensure consistency and compliance.

Construction Management

POSTED

about 11 hours ago

DEADLINE

Surveying and Geospatial Data Collection ServicesThe City of Issaquah is seeking qualified contractors to provide on-call land surveying, topographic mapping, boundary determination, and construction staking services in support of parks and infrastructure projects. The solicitation, classified under NAICS code 541370 for surveying services, is structured as a subcontract opportunity with a response deadline of August 7, 2026, and was posted on July 20, 2026. Services are expected to be performed within the jurisdiction of Issaquah, Washington, and will require precision geospatial data collection to ensure accurate project alignment and compliance with local development standards. Contractors must be prepared to respond promptly to project needs, deliver high-quality field data, and coordinate with city staff and other stakeholders throughout the lifecycle of various public works initiatives.

City of Issaquah

POSTED

about 11 hours ago

DEADLINE

RFQ PARKS-On-Call Surveying Consultants for Parks & Recreation ProjectsThe City of Issaquah Parks and Community Services Department is seeking to establish an on-call contract with up to two qualified survey consulting firms to provide specialized surveying services for parks and recreation projects. These services may be required to support larger capital initiatives or address isolated engineering needs, with work being issued through individual task orders following the format outlined in Professional Services Agreement Attachment C. The volume of work and number of hours per task order will vary based on project demands, and the City does not guarantee any minimum level of activity or commitment to issue task orders. Firms must be prepared to respond flexibly to unpredictable needs across a range of technical specialties to ensure comprehensive coverage for the department's requirements. The solicitation, numbered Parks-07.20.2026, was posted on July 20, 2026, with responses due by August 7, 2026. Interested firms must submit proposals by the deadline, and all work will be performed within the state of Washington. Primary contact for inquiries is Robin Spear, reachable via email or phone, and additional details are available through the public purchase portal. The contract is open to qualified consultants without specific set-aside provisions, and evaluation will focus on the ability to deliver high-quality, timely surveying services tailored to the City’s parks and recreation infrastructure needs.

City of Issaquah

POSTED

about 11 hours ago

DEADLINE

Civil/Structural Inspection and Surveying Services

POSTED

about 12 hours ago

DEADLINE

GIS Mapping & Spatial Data DevelopmentThe contract requires the development of detailed GIS maps for cemetery-related spatial data, including plot boundaries, burial locations, family groupings, and terrain topography, all to be integrated into geospatial layers suitable for municipal and public use. The work involves collecting and incorporating field data into accurate, usable digital formats that support long-term recordkeeping, public access, and administrative functions for cemetery management. The project is focused on the Central Square area in Bridgewater, Massachusetts, with a zip code of 02324, and must be performed at that location. This is a subcontract under NAICS code 541370, solicited by the Massachusetts Finance Department, with responses due by September 2, 2026. The solicitation was posted on July 20, 2026, and is open for bidding through the CommBuys platform. While no specific set-aside status or point of contact details are provided, the emphasis is on delivering precise, reliable geospatial datasets that meet public sector standards for accuracy, accessibility, and durability. The successful vendor must demonstrate expertise in GIS data collection, spatial analysis, and integration of field-verified information into coherent map products.

B135 - Finance Department

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Surveying and Site Layout Services

POSTED

about 15 hours ago

DEADLINE

in about 1 month

B--BLM ID AML DIGITAL INVENTORYThis contract, identified as BLM ID AML DIGITAL INVENTORY under solicitation number 140L2626Q0045, is a Firm Fixed-Price acquisition issued by the Bureau of Land Management’s Idaho State Office within the Department of the Interior, targeting a Total Small Business Set-Aside under NAICS code 541370 for special studies and analysis related to environmental assessments. The work involves utilizing LiDAR technology to digitally inventory, spatially document, field validate, and risk-rank abandoned mine land features such as shafts, adits, waste rock dumps, mill tailings, and prospect pits across Idaho, adhering to national BLM data standards and the Abandoned Mine Site Cleanup Module schema. The contractor is required to provide all labor, supplies, and equipment necessary to deliver a finalized Abandoned Mines Feature spreadsheet and BLM-approved metadata, ensuring accuracy and conformity in all submissions. Performance is scheduled from August 3, 2026, through June 30, 2027, with work conducted during standard business hours Monday through Friday, excluding federal holidays, and any off-hours work requiring prior written approval from the Contracting Officer. The place of performance is in Boise, Idaho, and deliveries must be made FOB Destination. The solicitation mandates that all proposals be submitted via email to charles_dodson@ios.doi.gov by July 21, 2026, and must include a detailed cost breakdown separate from the technical proposal, outlining labor hours, per diem, and equipment expenses. Technical proposals must demonstrate the offeror’s staff organization, methodology, proposed timeline, and prior experience with similar government contracts, while also addressing key questions raised by the scope. Evaluation is based on best value using a trade-off approach, considering technical capabilities, applicant qualifications, past performance, and price — with pass/fail gates for ability to perform field work within the timeline and RFQ compliance. The Contracting Officer, Charles Dodson, holds sole authority over contract modifications and acceptances, while a designated Contracting Officer’s Representative will oversee technical performance. Payment must be submitted electronically through the Treasury’s Internet Payment Platform, requiring a copy of the company invoice as an attachment, and contractors must be registered in SAM with up-to-date representations and certifications, including small business status and compliance with drug-free workplace, whistleblower protections, labor standards, and equal opportunity requirements. All contractors must also comply with security protocols involving Standard Form 312 and

Idaho State Office

POSTED

about 15 hours ago

DEADLINE

Data Analysis & GIS Mapping

City of Fitchburg

POSTED

DEADLINE

in about 1 month

More opportunities from California → AS- Procurement (AS-P)

Same awarding agency

Building System Commissioning & TestingThe contract titled Building System Commissioning & Testing seeks a subcontractor to perform comprehensive commissioning, functional testing, and verification of electrical and control systems to ensure full operational performance. This includes all phases of system validation from initial startup through final verification, with a focus on confirming that equipment and controls function as designed and meet specified performance criteria. Documentation of all testing procedures, results, and corrective actions is required, along with active coordination with project stakeholders to ensure alignment with operational goals and compliance with technical specifications. The work is classified under NAICS code 541330 and is posted as a subcontract opportunity by AS Procurement under the California agency. The solicitation was published on July 13, 2026, with responses due by August 17, 2026. While the exact location of performance is not specified, the effort is anticipated to support building systems within California. The contract emphasizes technical precision, thorough documentation, and seamless communication among project teams to deliver systems that are fully functional, reliable, and ready for handover.

Engineering Services

POSTED

DEADLINE

Lead-Based Paint RemediationThe contract pertains to the identification, containment, and remediation of lead-based paint hazards in compliance with EPA and OSHA regulations, requiring thorough surface preparation, encapsulation, or complete removal of hazardous materials. Work must be performed to industry-standard safety and environmental protocols, ensuring the protection of workers and occupants during all phases of remediation. The scope is narrowly focused on hazardous material abatement services, with no indication of broader construction or renovation activities. This is a subcontract opportunity posted on July 13, 2026, with a response deadline of August 17, 2026, under NAICS code 562910 for other remediation services. The procuring entity is AS-Procurement (AS-P) under the California agency, though specific location details for performance or contact are not provided. Interested parties must submit responses through the provided procurement portal before the deadline, with no set-aside classification or demographic preferences indicated in the solicitation.

Remediation Services

POSTED

DEADLINE

Asbestos Encapsulation & Abatement ServicesThe contract requires the safe encapsulation, removal, and abatement of asbestos-containing materials in strict adherence to all applicable federal, state, and local regulations. All work must be performed with rigorous attention to health and safety protocols to prevent exposure and environmental contamination. Proper disposal of asbestos waste is mandated, including transport to permitted facilities and adherence to chain-of-custody requirements. Comprehensive documentation must be maintained throughout the project, covering inspection reports, work plans, air monitoring results, and final certifications to validate compliance and completion. The solicitation is issued as a subcontract under NAICS code 562910 for hazardous waste remediation services, with a response deadline of August 17, 2026. The contract is managed by the California office of AS-Procurement with no specified set-aside designation or place of performance details provided. While no point of contact is listed, the procurement portal link is available for further inquiry. All contractors must demonstrate proven experience in asbestos abatement and full regulatory knowledge to qualify for award.

Remediation Services

POSTED

DEADLINE

Electrical Control Systems Installation & IntegrationThe contract calls for the complete furnishing, installation, and integration of electrical control systems, requiring full lifecycle support from initial setup through final commissioning and testing. The work must ensure seamless operational performance across all designated design ranges and includes close coordination with other trades to guarantee system interoperability and functional reliability. All activities are subject to strict adherence to industry standards and project-specific requirements to achieve certified performance outcomes. This subcontract, identified under NAICS code 238210, is administered by AS-Procurement (AS-P) through the California agency office, with a response deadline of August 17, 2026. The place of performance and specific location details are not provided, but the scope implies on-site execution at an undisclosed facility or facilities under California jurisdiction. Contractors are expected to manage logistics, scheduling, and technical integration independently while maintaining alignment with broader project objectives and timelines.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

LA County (CDBG Projects) Job Order Contracts Numbers 153, 154, & 155The Los Angeles County Development Authority (LACDA) is soliciting bids for three Job Order Contracts (JOCs) numbered 153, 154, and 155 under Solicitation Number LACDA26-044, aimed at providing construction services for Community Development Block Grant (CDBG) projects throughout Los Angeles County. These are firm-fixed-price, indefinite quantity contracts with a term of one year or until the maximum contract value of $6,402,606.00 is expended, whichever occurs first; however, any work order issued prior to expiration will automatically extend the contract solely for completion of that scope. Bidders must submit separate, complete proposals for each JOC, answer all solicitation questions, and guarantee their bids for at least 270 days. Failure to provide accurate or complete responses may result in a non-responsible determination. Proposals must be submitted exclusively via the LACDA OpenGov Procurement portal by 2:00 p.m. on August 17, 2026; late or improperly submitted bids will be rejected. A mandatory virtual pre-bid meeting is scheduled for July 27, 2026, and attendance confirmation is required by July 24. The JOCs utilize Gordian’s proprietary software and Construction Task Catalog to establish unit prices for a wide array of repair, remodeling, and renovation tasks, with work orders issued to perform specific tasks at various sites across the County. All work must comply with the Statement of Work, applicable CSI MasterFormat divisions, federal and state regulations, and manufacturer specifications. The contracts are subject to strict compliance with federal and state labor standards, including the Davis-Bacon Act and California’s prevailing wage laws, with the higher wage rate prevailing in case of conflict; certified payrolls must be submitted and retained for three years. Contractors must provide performance and payment bonds at 100% of the contract value and a 5% bid bond, alongside required insurance coverage including general liability with completed operations and primary/non-contributory language, automobile liability covering owned, hired, and non-owned vehicles, and statutory workers’ compensation with employer’s liability and waiver of subrogation. Compliance with the Build America, Buy America Act, Section 3 of the Housing and Urban Development Act, California’s CSLB B-General Building Contractor license, Child Support Compliance Program, Equal Employment Opportunity, Fair Chance Employment Hiring Practices, Zero Tolerance Human Trafficking Policy, and other local

Commercial and Institutional Building Construction

POSTED

DEADLINE

Surveying and Site Layout ServicesThe contract titled Surveying and Site Layout Services encompasses comprehensive topographic surveys, boundary verification, and precise layout for construction elements, ensuring accurate site documentation and alignment with design specifications. These services are critical for infrastructure development and will require adherence to high standards of measurement and documentation to support subsequent construction activities. The work is classified under NAICS code 541370, indicating specialized engineering surveying services, and is structured as a subcontract with no set-aside designation. The solicitation was posted on July 13, 2026, with a response deadline of August 17, 2026, providing interested parties approximately one month to submit proposals. The contracting entity is AS-Procurement (AS-P) under the California agency, though specific office location and point of contact details are not provided. The place of performance is not clearly defined in the data, but the work is expected to occur within California. The contract opportunity is accessible through the online procurement portal at the provided link, where full details and submission requirements may be obtained.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Road Paving and Asphalt MillingThe contract pertains to roadway, parking lot, and airfield construction work involving milling, grading, and asphalt paving, classified under NAICS code 237310 for heavy and civil engineering construction. It is listed as a subcontract opportunity posted on July 13, 2026, with a response deadline of August 17, 2026, and is managed by AS-Procurement under the California agency. The work will be performed across unspecified locations within California, with no set-aside provisions detailed. All bids must be submitted by the stated deadline to be considered, and submissions should align with the scope of surface preparation and pavement installation services required for transportation and infrastructure projects. Interested parties can access additional details via the official procurement portal link provided.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Concrete Forming and PlacementThe contract pertains to the forming, reinforcing, and pouring of concrete for foundations, slabs, walls, and other structural elements as part of construction activities under NAICS code 238110. It is designated as a subcontract and was posted on July 13, 2026, with a response deadline set for August 17, 2026. The solicitation is managed by AS-Procurement under the California agency, though specific details regarding the location of performance, point of contact, or set-aside status are not provided. Interested parties must submit their proposals prior to the stated deadline to be considered for award. The project does not include additional information on funding source, payment terms, or required certifications beyond the scope of concrete work described.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation seeks qualified subcontractors to install comprehensive plumbing systems encompassing water supply, drainage, and gas piping for various building and infrastructure projects. It is classified under NAICS code 238220, indicating specialized trade contracting for plumbing, heating, and air conditioning, and is issued by AS-Procurement under the California agency. The opportunity was posted on July 13, 2026, with a response deadline of August 17, 2026, giving interested parties approximately one month to submit proposals. The place of performance has not been specified, suggesting work may be required across multiple locations within California. No set-aside preferences or organizational type restrictions are indicated, making this open to eligible subcontractors regardless of size or certification status. All submissions must be made through the official procurement portal linked in the contract posting.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services is a subcontract for the installation of electrical systems on commercial or infrastructure projects, encompassing conduits, wiring, lighting, and power distribution. It is classified under NAICS code 238210 and was posted on July 13, 2026, with a response deadline of August 17, 2026. The procurement is managed by AS-Procurement under the California agency, though specific office location and point of contact details are not provided. The place of performance is unspecified, indicating flexibility in project locations within the state. Interested parties must submit responses prior to the deadline to be considered for award under this subcontract opportunity, with no set-aside designation identified for small businesses or other categories. The solicitation is accessible via an online portal link for further details and submission.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

CCE Grant Job Order Contracts Numbers 156, 157, 158, 159, 160, & 161The Los Angeles County Development Authority (LACDA) is soliciting bids for six Job Order Contracts (JOCs) numbered 156 through 161 under Solicitation LACDA26-045, which is structured as an indefinite-delivery/indefinite-quantity contract with a maximum value of $6,402,606.00. The contract term spans one year or until the maximum contract value is exhausted, whichever occurs first, with automatic extension permitted only to complete any work order issued before expiration. Bidders must submit separate proposals for each JOC number and guarantee their bids for a minimum of 270 days. The work involves construction, renovation, repair, and refurbishment services across Los Angeles County, executed via individual work orders based on pre-established unit prices derived from the Gordian JOC SolutionTM platform, which includes proprietary software, cost data, and a construction task catalog. All work must comply with the Statement of Work, California labor codes, prevailing wage requirements, and applicable state and local regulations, including those enforced by the California Division of Labor Standards Enforcement and the Contractors State License Board, which requires a B-General Building Contractor license. Bidders are obligated to adhere to all safety, environmental, and accessibility statutes, including the California Labor Code, ADA, and Civil Rights Act, and must demonstrate compliance with County-specific programs such as Child Support Compliance, Zero Tolerance for Human Trafficking, and Fair Chance Employment. Proposals must be submitted in hard copy only, hand-delivered to LACDA’s Alhambra office by the deadline of August 17, 2026, at 2:00 p.m., with no electronic submissions accepted. A mandatory virtual pre-bid meeting is scheduled for July 27, 2026. The award will follow a Lowest Price Technically Acceptable (LPTA) methodology, evaluating bids solely on price and a series of weighted prevailing wage and overtime adjustment factors tied to commercial and residential classifications, with no qualitative or technical trade-offs permitted. Bid bonding at 5% and full performance and payment bonds at 100% are required, along with comprehensive insurance coverage including general liability, automobile liability, workers’ compensation, professional liability, and crime coverage. Contractors must also be registered with the California Department of Industrial Relations, comply with the Gordian license agreement, and disclose any past labor violations, criminal convictions, false claims, debarments, or organizational conflicts of interest

Commercial and Institutional Building Construction

POSTED

DEADLINE

Specialty Trade Coordination and JOC Task Order ExecutionThe contract requires the contractor to act as a specialty subcontractor for repair, remodeling, and maintenance tasks under the Job Order Contracting framework, executing individual task orders as issued. This subcontracting role involves coordination and delivery of specialized trade services across a range of facilities, adhering to the standards and procedures outlined in the JOC system to ensure efficient and timely project completion. The work is governed under NAICS code 238210, which pertains to electrical contracting and related specialty trades, indicating the anticipated scope focuses on technical and skilled labor services. The opportunity is issued by the California-based AS-Procurement office, with no specific geographic restrictions listed for performance, suggesting work may occur across multiple sites within the state. The solicitation was posted on July 13, 2026, with a deadline for responses set for August 17, 2026. While no set-aside designation or point of contact is provided, the contract is structured as a subcontract under a larger government procurement framework, emphasizing the need for proven experience in JOC-based task execution and the ability to scale operations according to fluctuating work orders without direct contract modifications. All activity must align with the procedural and quality benchmarks established under the JOC vehicle.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE