Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Testing and Quality Inspection Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract awards independent testing and inspection services focused on electrical continuity, insulation resistance, and adherence to military specifications for cable assemblies. These services are critical to ensuring the reliability and safety of components used in defense applications, with all work required to meet stringent military standards. The scope of work involves rigorous laboratory and field evaluations to verify electrical performance and compliance, employing calibrated instrumentation and documented procedures to validate results for acceptance by the U.S. Department of Defense. Issued as a subcontract under the Defense Logistics Agency, the contract is categorized under NAICS code 541380 for other scientific and technical consulting services. The performance location and specific delivery details are not fully specified, but the work is intended to support Department of Defense operational readiness through quality assurance of cable systems. The contract was posted on July 17, 2026, and is accessible via the DIBBS platform under award number SPE4A626P9542, indicating it is part of a larger procurement framework managed by the DLA to sustain trusted supply chain integrity for military electrical infrastructure.

General Info

Independent testing of cable assemblies to meet military specs for U.S. Department of Defense readiness.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent testing and inspection services for electrical continuity, insulation resistance, and compliance with military specifications for cable assemblies.

Similar Contracts

Same NAICS industry code

Product Verification and First Article TestingThe contract requires the contractor to perform First Article Testing (FAT) and support Product Verification Testing (PVT) for defense-related products, encompassing both destructive and non-destructive evaluation methods to ensure compliance with technical specifications and quality standards. Testing activities are critical to validating design and manufacturing processes prior to production scale-up, with results directly influencing acceptance decisions for defense systems. The work is classified as a subcontract under NAICS code 541380, indicating it falls within engineering services, and is managed by the Defense Logistics Agency under the Department of Defense. The solicitation was posted on July 24, 2026, with responses due by August 3, 2026, and performance is expected to occur at an unspecified location under the agency’s jurisdiction. No set-aside preferences or specific geographic requirements are indicated, and the contract is accessible through the DIBBS portal for eligible subcontractors to respond.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

mRNA-sequencing and Methyl-Bisulfite sequencing from submitted leaf tissue samplesThis solicitation, numbered 1232SA26Q0964, is a Request for Quotation issued under FAR Part 12 for commercial items to perform mRNA sequencing and Methyl-Bisulfite sequencing on 610 RNA and 20 DNA samples extracted from leaf tissue, with the work intended to support USDA Agricultural Research Service research on crop traits. The acquisition is a Total Small Business Set-Aside under NAICS code 541380, with a size standard of $19 million in annual receipts, and all responsible small businesses may submit quotations. The contract is a Firm Fixed Price based on a Lowest Price Technically Acceptable (LPTA) evaluation method, where only the lowest-priced offer is reviewed for technical acceptability, which is assessed on an adjectival scale of Acceptable or Unacceptable, with past performance considered as part of this assessment. The estimated contract value is $372,500, derived from unit pricing of $610 per RNA sample and $20 per DNA sample, with performance beginning on August 17, 2026, and concluding on August 16, 2027, under FOB Destination terms, with samples delivered to Fargo, North Dakota, and final sequencing data transmitted via secure, password-protected portal to Beltsville, Maryland. The contractor must adhere to strict technical timelines: a QC report must be submitted within six business days of sample receipt, library preparation and sequencing initiation must begin within five business days of QC approval, a sequencer run statistic report is due within seven business days of QC confirmation, and final raw and assembled sequencing data must be delivered within ten business days of library quality approval. All data remains the exclusive property of the government and cannot be transferred outside the United States or used to train AI/ML models. Additional requirements include mandatory compliance with DEI certification clauses under AGAR 452.203-70 and 452.203-71, prohibiting participation in or funding of programs that conflict with Title VI and Title VII of the Civil Rights Act and Executive Orders 14168 and 14173, with violations potentially triggering False Claims Act liability. The contractor must ensure all subcontractors flow down the DEI certification and may not impose unauthorized security, access, or liability terms on the government. Packaging and marking require shipment tracking identifiers including SHIP NUMBER, PARTIAL/FINAL designation,

USDA Ars Afm Apd

POSTED

about 10 hours ago

DEADLINE

Fire Hydrant Inspection and Testing ServicesThe contract requires the performance of routine inspection, flow testing, and operational checks of fire hydrants to verify compliance with fire safety standards and ensure the reliability of the water supply system. All tasks must be executed according to established protocols to maintain peak functionality and readiness for emergency response. The work is scoped as a subcontract under the NAICS code 541380, indicating professional, scientific, and technical services related to environmental and engineering consulting. The solicitation was posted on July 23, 2026, and responses are due by August 20, 2026. The contract is administered by OC Community Resources in California, though specific location details for performance or contact are not provided. All work must align with applicable fire department regulations and industry best practices to uphold public safety.

OC Community Resources

POSTED

about 23 hours ago

DEADLINE

Laboratory Instrument Preventative Maintenance & Calibration ServicesThe contract outlines a comprehensive service agreement for on-site annual preventative maintenance, factory-level calibration, and performance verification of high-precision thermal analysis instruments, specifically including the LFA 467 HT model, all conducted in strict accordance with original equipment manufacturer protocols. These services are essential to ensure the continued accuracy, reliability, and compliance of laboratory instrumentation used in critical thermal analysis applications. The work is expected to be performed at the client’s location, with all procedures aligned to OEM specifications to maintain instrument integrity and operational standards. This is a subcontract opportunity posted on July 23, 2026, with a response deadline of August 4, 2026. It falls under NAICS code 541380, which categorizes it within other scientific and technical consulting services. The contracting entity is the state of Utah, with Utah listed as both the agency name and organizational name, though no specific office address, place of performance details, or point of contact information is provided. Interested parties must submit proposals through the specified online portal by the stated deadline to be considered for award.

POSTED

about 23 hours ago

DEADLINE

Traffic Engineering and Safety AnalysisThe contract titled Traffic Engineering and Safety Analysis seeks qualified subcontractors to conduct comprehensive traffic impact studies, design traffic control plans, and perform signal warrant analyses in full compliance with the Manual on Uniform Traffic Control Devices and Caltrans standards. The work is intended to support transportation infrastructure planning and safety improvements across California, ensuring all engineering solutions meet state-mandated guidelines for efficiency and public safety. This subcontract is open for bid with a response deadline of August 24, 2026, and falls under the NAICS code 541380 for other engineering services, with no specific set-aside provisions outlined. The California Department of Transportation is the issuing agency, and all deliverables must align with the technical and regulatory expectations of the state’s transportation authority. Interested parties can access the full solicitation through the CalEprocure portal.

California Department of Transportation

POSTED

DEADLINE

in about 1 month

Data Management and Laboratory Testing SupportThe contract seeks support for the collection, analysis, and certification of test data required for compliance and quality assurance purposes, with a strong emphasis on coordination with accredited laboratories to ensure data integrity and regulatory alignment. The scope includes end-to-end management of laboratory testing workflows, from initial sample handling through final certification and submission of verified results, ensuring all procedures meet recognized standards and are properly documented. Contractors are expected to manage timelines, maintain chain-of-custody protocols, and deliver certified outputs in a timely manner to meet project milestones. This subcontract is issued by Montgomery County, Pennsylvania, under NAICS code 541380, which corresponds to other scientific and technical consulting services. The solicitation was posted on July 23, 2026, with a deadline for responses set for September 1, 2026, at 3:00 PM. While specific performance locations and point of contact details are not provided, the work is expected to support governmental operations requiring precise and auditable laboratory data. Interested parties should ensure their capabilities align with accreditation requirements and that they can reliably interface with certified testing facilities to fulfill contractual obligations.

Montgomery County Pa

POSTED

DEADLINE

in about 1 month

Reliability Testing and Validation ServicesThe contract seeks independent testing services to evaluate the reliability, safety, and environmental performance of door systems under rigorous conditions. This includes comprehensive cycle testing to simulate real-world usage and validation of mean time between failures to ensure long-term durability and operational integrity. The work is focused on verifying that door systems meet required performance benchmarks across varying environmental stresses and repeated use scenarios. The opportunity is posted as a subcontract under NAICS code 541380, with a response deadline of September 9, 2026. It is administered by the State of Utah, with all performance activities expected to be conducted within the state. Bidders must comply with the technical requirements for testing protocols and deliver comprehensive validation data, though no specific set-aside provisions or point of contact details are provided. The solicitation is accessible through the Utah BonfireHub portal.

POSTED

DEADLINE

in about 2 months

Radioactive Materials Screening and NotificationThe contract seeks a subcontractor to perform radiological screening of materials to identify any radioactive content exceeding established threshold levels, ensuring compliance with military standards for safety and traceability. The work requires precise detection methods and adherence to MIL-STD-129 for proper labeling, documentation, and reporting of affected items to prevent unintended exposure and maintain regulatory integrity across the supply chain. All screening activities must be conducted with calibrated equipment and documented procedures to verify accuracy and accountability. This subcontract is issued under the Department of Defense’s Strategic Acquisition Program Directorates and falls under NAICS code 541380, indicating it involves scientific and technical consulting services. The solicitation was posted on July 23, 2026, with a firm response deadline of July 28, 2026, and is accessible through the DIBBS system. Performance location and point of contact details are not specified, but the work is expected to support defense logistics and material handling operations, emphasizing strict regulatory compliance and the timely identification of potentially hazardous radioactive substances before they enter controlled environments.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Quality Assurance and Compliance DocumentationThe contract seeks a small business to provide technical documentation, quality assurance testing, and compliance verification services to ensure splash guards meet all technical specifications set by the Defense Logistics Agency. This includes preparing Safety Data Sheets and validating labeling to confirm adherence to regulatory and operational standards. The work is critical to ensuring product conformity and safety for military use, requiring precise execution throughout the documentation and testing phases. The solicitation is a total small business set-aside under FAR 19.5, meaning only small businesses are eligible to respond, and it falls under NAICS code 541380 for other professional, scientific, and technical services. The opportunity was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. While no specific location is listed for performance or the point of contact, the work is expected to be performed in support of defense logistics operations under the authority of the DLA.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Packaging, Labeling, and Hazardous Materials Compliance Services

JACKSONVILLE BLDG

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Quality Assurance & Product Verification Testing (PVT)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

ITAR Compliance and Technical Data ManagementThe contract requires comprehensive management of ITAR-controlled technical data, ensuring strict adherence to U.S. export control regulations and seamless coordination with the Directorate of Defense Trade Controls and the Joint Certification Program. The contractor will be responsible for implementing and maintaining compliance protocols to safeguard sensitive defense-related information, handling all aspects of documentation, access controls, and reporting procedures mandated by ITAR. This includes establishing internal processes to monitor, classify, and transfer technical data while ensuring all personnel and partners follow export compliance standards and engage effectively with DDTC and JCP requirements. As a subcontract under the Department of Defense through the Defense Logistics Agency, the engagement demands a high level of operational precision and regulatory expertise, particularly in navigating the complex landscape of international defense trade controls. The work is governed by NAICS code 541611, indicating a focus on management consulting services related to administrative and general management. The response deadline is August 3, 2026, and performance may occur at any location as no specific place of performance is defined, allowing flexibility for remote or distributed operations as long as compliance obligations are fully met without compromise.

Administrative Management and General Management Consulting Services

POSTED

about 5 hours ago

DEADLINE

Secure Military Packaging and MarkingThe contract titled Secure Military Packaging and Marking requires full compliance with MIL-STD-2073-IE and RP001 standards for the packaging, preservation, labeling, and marking of military equipment and supplies. This includes accurate barcoding, application of special marking codes, and adherence to strict preservation techniques to ensure product integrity during storage and transit. All packaging and labeling must meet Department of Defense specifications to support reliable identification, handling, and logistics operations across the supply chain. The work is classified as a subcontract under NAICS code 561910 and is being managed by the Defense Logistics Agency under the Department of Defense. Responses are due by August 3, 2026, with the solicitation posted on July 24, 2026, and performance locations are not specified beyond the overarching jurisdiction of the agency.

Packaging and Labeling Services

POSTED

about 5 hours ago

DEADLINE

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 5 hours ago

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 5 hours ago

DEADLINE

Precision Machining of Bipod Leg AssemblyThe contract specifies the precision CNC machining, milling, and finishing of the left-hand machine gun bipod leg in strict accordance with military drawings and technical specifications. The work requires high-accuracy manufacturing processes to meet stringent defense standards, ensuring dimensional integrity, material consistency, and surface finish quality critical for operational reliability in field conditions. All components must be produced using approved methods and materials, with full compliance to government-mandated quality control protocols. Submitted by a subcontractor, the contract is issued under the Defense Logistics Agency within the Department of Defense and classified under NAICS code 332710 for metal forging and stamping. The opportunity was posted on July 24, 2026, with responses due by August 3, 2026, indicating a limited window for qualified vendors to bid. Performance location details are not specified, but execution must align with defense logistics requirements, and the work will support a critical small arm component in a military platform. All submissions must adhere to military-grade tolerances and documentation standards to qualify for award.

POSTED

about 5 hours ago

DEADLINE

LEG, MACHINE GUN BIPThe contract specifies the procurement of one unit of a left-hand machine gun bipod leg, identified by NSN 1005-00-608-5020, with a delivery deadline of 155 days after contract award. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing inquiries must be directed to DLA’s Aviation or Land & Maritime Supply Chains. The item is classified as a Category I munitions part under DoD directives, necessitating demilitarization procedures upon disposal. It is subject to stringent quality controls including tailored higher-level contract requirements, configuration change management through engineering change proposals, inspection and acceptance at origin, and mandatory qualification of components via Qualified Products Lists or Qualified Manufacturers Lists. Technical data associated with the item is controlled under ITAR or EAR regulations, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; only contractors with approved U.S./Canada Joint Certification Program status, completed DOD export training, and DLA authorization may access controlled data. Packaging must meet DLA standards, government identification must be removed from non-accepted items, and solicitation compliance is governed by the version of the DLA Master List of Technical and Quality Requirements in effect on the relevant date. The solicitation number is SPE7L7-26-Q-2059, with a response deadline of August 3, 2026, and primary point of contact is Charles Duncan at the Defense Logistics Agency.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 5 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense Information

Computer Systems Design Services

POSTED

DEADLINE

Hazard Communication & Regulatory Compliance Support

Environmental Consulting Services

POSTED

DEADLINE

Packaging and Labeling Services for Hazardous/Regulated Items

All Other Support Services

POSTED

DEADLINE

Supply of Respirator Cartridges (Air Filtering)

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Quality Assurance and Third-Party Certification Services

Other Scientific and Technical Consulting Services

POSTED

DEADLINE