Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Electrical Wire Manufacturing and Supply (MIL-DTL-12000 Compliant)

Active

Federal

Response Deadline07/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture and delivery of 100 units of electrical wire designated by NSN 6145-01-384-4313, fully compliant with the military specification MIL-DTL-12000. All products must be packaged and marked according to established military standards to ensure proper handling, identification, and compliance with defense logistics requirements. The work is classified as a subcontract under NAICS code 332216, and the sourcing is managed by the Maritime Supply Chain under the Department of Defense. The solicitation was posted on July 19, 2026, with responses due by July 30, 2026, indicating a brief but critical window for bidders to submit proposals. The place of performance and point of contact information are not specified, but the contractual obligations are bound to federal defense supply standards, and the work must be conducted in alignment with DLA procurement protocols as referenced by the DIBBS platform link provided.

General Info

Manufacture and deliver 100 units of MIL-DTL-12000-compliant electrical wire per DoD procurement standards.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332216 - Saw Blade and Handtool ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 30

Submission deadline

Response Deadline

07/30/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of 100 units of electrical wire (NSN 6145-01-384-4313) compliant with MIL-DTL-12000, including packaging and marking per military standards.

Similar Contracts

Same NAICS industry code

SCALE, WEIGHINGThe contract specifies the procurement of commercial off-the-shelf weighing scales identified by NSN 6670016245433 and part number 1776113, supplied by Apple Valley Scale Company and Dymo Corporation, with a total quantity of 372 units. Delivery is required FOB origin within 168 days of contract award, with an original required delivery date of September 5, 2026, and a needed ship date of January 13, 2027. The unit price is $372.00 per unit, totaling $138,384.00, with no variance permitted in quantity. Inspection and acceptance occur at the destination facility located at DLA Distribution Red River in Texarkana, Texas, and all items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all labeling and marking must conform to specified government standards. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. Acceptance requires zero non-conformances in the sample lot unless the contract states otherwise. The contract is a total small business set-aside under NAICS code 332216, issued as a solicitation with a response deadline of July 28, 2026. All technical and quality requirements referenced by R and I numbers are governed by the DLA Master List in effect on the solicitation issue date, and transportation logistics are subject to DLAD Proc Notes C19 and C20. The point of contact for the contract is Hien-Van Trinh, and the purchase request number is 7017536479.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 5 hours ago

DEADLINE

66--SCALE,WEIGHINGThe U.S. Department of Defense, through DLA Aviation, is seeking to procure 372 units of NSN 6670016245433, SCALE, WEIGHING, with delivery required to DLA Distribution Red River within 168 days of award. This procurement is issued as a Request for Quotation under solicitation number SPE4A526T295Y, available exclusively online via the SAM.gov portal, with no hard copies provided. Only approved sources, identified by the CAGE codes 0M5P6 and 0TH24, are eligible to respond, though all responsible contractors may submit quotes if received by the deadline. The solicitation is a Total Small Business Set-Aside under NAICS code 332216, limiting participation to small businesses certified by the SBA. Quotes must be submitted electronically, and no technical specifications, plans, or drawings are available. The primary point of contact for inquiries is listed via email, with further details accessible through the provided SAM.gov link or the DIBBS website using the solicitation number. The response deadline is July 28, 2026, and the contracting office is located in Richmond, Virginia.

POSTED

about 10 hours ago

DEADLINE

Socket Wrench Crowfoot, Gimbal Bearing Compressor Sets Solicitation The solicitation seeks suppliers to provide socket wrench crowfoot attachments with part number 18C12916-1 and compressor sets for gimbal bearings with part number 901-210-025-101, under a total small business set-aside as defined by FAR 19.5. This opportunity is open exclusively to small businesses and falls under the NAICS code 332216, which pertains to forging and stamping. The solicitation, identified by number N6833526Q1164, was posted on July 20, 2026, and bids must be submitted by August 3, 2026, at 10:00 PM Eastern Time. The contracting activity is led by the Naval Air Warfare Center Aircraft Division, a component of the Department of Defense, with performance tied to Joint Base MDL, New Jersey. All correspondence and inquiries should be directed to Suresh Jafar, the primary point of contact, via email at suresh.jafar.civ@us.navy.mil or phone at 240-587-2457. The solicitation is available for review through the SAM.gov platform at the provided UI link, and no physical place of performance is specified beyond the office location.

Navair Warfare Ctr Aircraft Division

POSTED

about 10 hours ago

DEADLINE

Solicitation - Standard Automotive Tool Set (SATS) Base in Mobile; NSN: 4910-01-531-2053 - UPDATEDThis solicitation, issued as a sealed bid under W912CH-26-B-0003, seeks a single Firm-Fixed Price contract for the Standard Automotive Tool Set (SATS) Base in Mobile, identified by NSN 4910-01-531-2053 and part number KTCS1753. The procurement is exclusively set aside for small business concerns under Revolutionary FAR Overhaul 19.104-1 and is for the delivery of a standardized tool system comprising five roll-around storage units labeled G, H, J, K, and L, along with additional commercially packaged hand tools, all meeting rugged military specifications. The Technical Data Package (TDP) with Distribution Statement A is available on SAM.gov and is essential for compliance, as the product must meet or exceed the quality and workmanship of domestic commercial equivalents. All bids must be submitted electronically in Microsoft Office or PDF format under strict formatting rules, including file size limits, naming conventions, and prohibition of hyperlinks or external references. The Government will evaluate bids without discussions, and failure to complete all required representations, fill-ins, or meet material requirements will result in immediate rejection. Bids must include pricing for both the production quantity and an unexercised option quantity of 95 units, evaluated on the lowest total price, with transportation costs assessed at FOB origin. The contract requires full compliance with military packaging standards, including MIL-STD-2073 and MIL-STD-129 for marking and labeling, with mandatory application of U.S. Military Property identification per MIL-STD-130 and adherence to Unique Item Identifier (UII) requirements. Inspection and acceptance must occur at origin, and the contractor is solely responsible for arranging pre-shipment government inspection through the Defense Contract Management Agency prior to shipping to the designated delivery location in New Cumberland, PA. Payment will be processed via Wide Area WorkFlow (WAWF) under specific DoDAAC routing instructions, and all submissions must be in English and U.S. dollars. The contract incorporates numerous FAR and DFARS clauses by reference, including those governing subcontractor payments, anti-kickback procedures, trafficking in persons, employment eligibility verification, and compliance with Buy American and Berry Amendment laws. Bidders must ensure their SAM registration is current and contains all applicable certifications within the last 12 months. Key amendments and updates, including Amendment 0001 and 0002, and the Domestic

POSTED

about 10 hours ago

DEADLINE

Hand Hammer Supply & ManufacturingThe contract seeks the manufacture or supply of a single hand hammer identified by NSN 5120-15-151-5812 and part number 99366792, requiring full compliance with Department of Defense technical specifications, military packaging standards, and labeling requirements. The item must be delivered to Camp Pendleton, with the designated zip code 92055-5574 serving as the sole place of performance. The solicitation falls under NAICS code 332216, categorizing it as a subcontract for the production of hand and edge tools. The opportunity was posted on July 19, 2026, with responses due by July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All deliveries must adhere strictly to government-mandated protocols to ensure suitability for military use and logistical compatibility.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

CABLE, POWER, ELECTRIThe contract involves the procurement of 30 feet of power cable, sold in continuous foot lengths, with the item identified by NSN 6145-01-666-9522 and a purchase request number 7017524585. Delivery is required within 20 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment updates the requirements. Configuration changes must be managed through an Engineering Change Proposal, and any request for deviation or waiver requires formal processing. Government identification must be removed from non-accepted supplies as specified. The solicitation number is SPE7M1-26-T-218W, posted on July 19, 2026, with responses due by July 30, 2026. The NAICS code is 332216, and the performing location is Selfridge ANGB, MI, 48045-5213. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Alisha Blanton as the primary point of contact.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

HANDLE, CRANKThe contract pertains to the procurement of 143 units of a HANDLE, CRANK identified by NSN 5340-01-559-9356 under solicitation SPE7L1-26-Q-1325, with a firm delivery deadline 272 days after award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting commercial standards. The item is defined by Army drawings, but any paint or coating specifications must comply with DCSC Drawing 16236 CS-2300-0001, which details Chemical Agent Resistant Coatings and high-temperature finish requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1, utilizing zero-defect acceptance unless otherwise stipulated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must adhere to DLA’s RP001 and MIL-STD-129, with hazardous materials conforming to FED-STD-313 and IP025, while non-hazardous items must meet ASTM D3951—subject to precedence by DLA requirements. Palletization and unit of issue must align with contract specifications, and packaging must be marked per federal guidelines. Delivery is FOB origin to the designated DLA San Joaquin receive warehouse in Tracy, CA, with inspection and acceptance occurring at destination. All drawings and specifications referenced are accessible via DIBBS during the solicitation period, and compliance with the referenced TDP revisions, QAPs, and reference drawings including 19207 12443760 and 16236 SQAPCARCLTPHOS81361 is mandatory. The contract enforces a zero variance in quantity, and the point of contact is Mary Miller at DLA.

LAND SUPPLY CHAIN

POSTED

DEADLINE

WIRE, ELECTRICALThe contract pertains to the procurement of electrical wire with NSN 6145011602260, under solicitation SPE7M1-26-T-218Z, requiring a total quantity of 10,000 feet delivered in three separate line items of 429 feet, 2,571 feet, and 7,000 feet. Delivery is to be made FOB origin within 46 days of contract award, with a permissible quantity variance of plus or minus 5 percent. Inspection and acceptance occur at the destination, and all materials must comply with MIL-STD-2073-1E for packaging and MIL-DTL-12000 for preservation, meeting strict marking requirements per MIL-STD-129 and DLA packaging standards. The wire must conform to SAE AS22759/11A and SAE AS22759E specifications, and the item is designated as a critical application with qualified products list applicability. Mercury and mercury-containing compounds are strictly prohibited except in specific functional components such as batteries, fluorescent lamps, and weapons systems, with additional containment requirements for portable devices. Packaging must prevent damage and ensure compliance with DLA’s uniform standards, including palletization and preservation protocols, while adhering to advice code directives on continuous length requirements. Delivery destinations include Hill AFB, New Cumberland, and Robins AFB, with specific ship dates varying per line item. The contract mandates full and open competition and incorporates all technical and quality requirements referenced through the DLA Master List, with deviations requiring formal engineering change proposals or variance requests. All units are issued in feet in accordance with DoD standards, and the point of contact is Alisha Blanton at DLA.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

WIRE, ELECTRICALThe contract pertains to the procurement of 100 units of electrical wire with NSN/Part Number 6145-01-384-4313, under solicitation SPE7M1-26-T-218J, with a delivery requirement of 20 days after award. The solicitation is issued by the Department of Defense through the Maritime Supply Chain organization and is subject to stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 as a Certified Third-Party Assessment Organization is mandatory, and the item is subject to Covered Defense Information requirements, necessitating appropriate data protection measures. The technical data associated with this item is classified under export control regulations—either ITAR or EAR—prohibiting any disclosure or transfer to foreign persons without prior authorization from the Department of State or Commerce, and DFARS 252.225-7048 governs its handling. Contractors must have valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, and receive DLA approval to access the controlled data. Additionally, any configuration changes must follow the Engineering Change Proposal and Request for Variance process, and packaging must meet DLA packaging requirements for procurement. The response deadline is July 30, 2026, with point of contact Alisha Blanton available for inquiries via phone or email.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

HAMMER, HANDThe contract pertains to the procurement of one hammer, hand, identified by the NSN 5120-15-151-5812 and part number 99366792, under solicitation SPE4A6-26-T-07TR, with a required delivery within 20 days FOB origin. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. All packaging and labeling must adhere strictly to MIL-STD-129 and the DLA Packaging Requirements, with palletization following RP001 specifications. Sampling for inspection must follow MIL-STD-1916 or ASQ H1331, Table 1, or an equivalent zero-based method; unspecified attributes are treated as major with a verification level of IV or an AQL of 1.0. Acceptance is based on zero non-conformances in the sample lot unless otherwise stated in the contract. The unit of issue is each, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and shipping must be conducted via traceable freight methods, not parcel post. Delivery is to the 3rd AAV BN at Camp Pendleton, California, with an original required delivery date of May 11, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

WRENCH, SPANNERThe contract solicitation SPE4A0-26-T-3940 is for the procurement of one unit of a WRENCH, SPANNER with National Stock Number 5120016655735, to be delivered FOB Origin within five days of order placement to Fort Carson, Colorado. The item is procured under a simplified acquisition with no approved technical data package available, and the specification relies on proprietary or insufficient data, making competition limited. Packaging must comply with MIL-STD-2073-1E using clean/dry preservation methods, corrugated paper wrap, and E5 box containers, with palletization following DLA’s RP001 requirements. Marking must adhere strictly to MIL-STD-129, including standardized barcoding, NSN, CLIN, and contract number identification, with no special marking required. Inspection and acceptance occur at the destination, with quality verification governed by MIL-STD-1916 or ASQ H1331 using zero non-conformance acceptance thresholds; critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0. Sampling may use MIL-STD-105/ASQ Z1.4 for lot sizing, but acceptance remains zero defects unless otherwise stated. Cybersecurity and information handling requirements are extensive, mandating NIST SP 800-171 controls, DFARS 252.204-7012 safeguards for covered defense information, and reporting of cyber incidents. The contractor must ensure compliance with prohibitions on using telecommunications equipment from Chinese military companies, handling hazardous materials, storing toxic substances, and employing hexavalent chromium. All payments must be processed via WAWF, and the contract includes clauses prohibiting mandatory arbitration, requiring whistleblower rights notification, restricting confidentiality agreements, and controlling the use of government work product. The contractor must maintain current UEI and CAGE codes, certify small business status if applicable, and comply with transportation rules including the use of U.S.-flagged vessels for ocean shipments. The unit price listed as $1.00 is inconsistent with historical pricing data, suggesting a potential placeholder or error, and no formal contract value or option quantities are specified, though the delivery date is set for July 15, 2026. All submissions must be made electronically through DIB

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

61--WIRE,ELECTRICALThe solicitation seeks quotations for 100 units of electrical wire with NSN 6145013844313, to be delivered to CLRS ASC AIR DEPOT 983 SQN PVE MH within 20 days after order award. The approved source for this item is specified as 81205 BMS13-48/3-2-20, and only electronic submissions are accepted; hard copies are not available. The procurement is conducted via an RFQ under solicitation number SPE7M126T218J, with all responsible suppliers encouraged to submit quotes that are received prior to the deadline of July 30, 2026. No technical specifications, plans, or drawings are provided, and bidders must rely on the designated approved source data and their own understanding of the requirements. The contract falls under NAICS code 332216 and is managed by the DLA Land and Maritime office located in Columbus, Ohio. All inquiries must be directed to the designated point of contact via email, with further details accessible through the SAM.gov workspace link provided.

DLA Land And Maritime

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

CONNECTOR, PLUG, ELECTRIThe contract solicitation SPE7M126U4482 seeks the procurement of 265 electrical plug connectors with NSN 5935011143439 under an indefinite delivery contract structure, with delivery required within 102 days after order placement and FOB origin terms. The item is a qualified product listed under Federal Stock Class 5935, requiring compliance with qualification standards outlined in procurement note H01 and technical specifications MIL-DTL-83723/69B(2) and MIL-DTL-83723H(4). The connector is designated as a critical application item and is subject to strict prohibitions against the use of any Class I ozone-depleting substances in its design, manufacturing, or testing unless prior written consent is obtained from the contracting officer; this prohibition overrides all other specification requirements but does not waive performance obligations. The contract mandates that packaging and marking strictly adhere to MIL-STD-129 for labeling and barcoding, with hazardous materials compliant with FED-STD-313 and TQ requirement IP025, while non-hazardous items must follow ASTM D3951 — though all DLA Master List technical and quality requirements take precedence. Palletization must conform to RP001, and bare item marking must satisfy RQ017. Inspection and acceptance occur at the destination, with the government assuming responsibility for both functions. The contract incorporates a comprehensive suite of FAR and DFARS clauses covering equal opportunity, human trafficking, employment eligibility, sustainable products, hazardous material safety, cybersecurity (including NIST SP 800-171 and safeguarding covered defense information), subcontracting, payment processing, export control, and prohibitions on hexavalent chromium and defense telecommunications from sanctioned entities. Payment is processed exclusively through Wide Area WorkFlow, and all offers must be submitted electronically via DIBBS by the August 4, 2026 deadline. The contract is competitively awarded under full and open competition, with no set-aside, and the estimated contract value per order is capped at $350,000, though no unit price is specified, leaving the actual financial obligation contingent upon future order quantities and pricing. The contractor must also comply with all representations required under Section K, including disclosure of unique entity identifiers, CAGE codes, and socioeconomic status if applicable, and must verify eligibility for federal contracts through Employment Eligibility Verification and

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

PLATE, RETAINING, ELECTRThe contract governs the procurement of a retaining plate for electrical connectors, identified by NSN 5935013637382, under solicitation SPE7M1-26-U-4485, issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a qualified product requiring compliance with the Qualified Products List (QPL) for Federal Stock Class 5935 connector assemblies and contacts, as defined in procurement note H01, and must conform to the non-government standard SAE AS85049F Revision F dated April 1, 2021, with part number M85049/95-24A-A. The contract specifies an estimated quantity of 120 units with a guaranteed minimum of 18 units and a maximum contract value of $350,000, structured as an indefinite-delivery contract where orders will be issued periodically under a bilateral framework. All deliveries are FOB origin, with a performance timeline of 131 days after award, and inspection and acceptance occur at the destination under FAR 52.246-2. Packaging and marking must adhere to MIL-STD-129, with hazardous materials handled per FED-STD-313 and TQ Requirement IP025, while non-hazardous materials follow ASTM D3951, though DLA’s Master List of Technical and Quality Requirements supersedes all others. Palletization must comply with RP001, and bare item marking is required per RQ017. The use of any Class I ozone-depleting substances is strictly prohibited without written consent from the contracting officer, a restriction that overrides other specifications but does not excuse product performance requirements. The contract imposes extensive cybersecurity, compliance, and procedural obligations. Contractors must adhere to NIST SP 800-171 controls, safeguard covered defense information per 252.204-7012, and report cyber incidents in accordance with DoD mandates, while also complying with restrictions on covered telecommunications equipment under 252.204-7018. Labor and ethics requirements include whistleblower protections, prohibitions on trafficking in persons, and employment eligibility verification. Invoicing must be submitted exclusively via Wide Area WorkFlow using permitted document types, and contractors are required to maintain active registration in the System for Award Management. All representations and certifications must

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

VALVE, SOLENOIDThe contract pertains to the procurement of one valve, solenoid with NSN 4810-01-606-6913 and part number P/N 12019-910 from TEREX USA, LLC, under solicitation SPE7M1-26-T-219H. Delivery is required within five days of award, with shipment originating from the supplier and delivered FOB origin to the Marine Aviation Logistics Squadron 14 at Cherry Point, North Carolina, using the fastest traceable means, explicitly prohibiting parcel post. The item must comply with all DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including ASTM D3951 packaging standards. Packaging must follow MIL-STD-129 labeling and RP001 DLA packaging requirements, with palletization adhering to specified guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute materials must be pre-approved unless explicitly allowed by the specification. The contract enforces a zero percent quantity variance and requires inspection and acceptance at the destination. The required delivery date is July 17, 2026, with a response deadline of July 31, 2026, and all transactions must reference the designated government identification codes for logistics and accounting purposes.

Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

ARM ASSY, WIPERThis contract pertains to the procurement of an ARM ASSY, WIPER with NSN 1240-01-592-3242 and part number 8242175, under solicitation SPE7M1-26-T-219J. The supplier, L3 TECHNOLOGIES, INC., is required to deliver 14 units, each priced at $14.00, for a total value of $196.00, with delivery due within 202 days from the contract award, no later than February 19, 2027. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no variance in quantity is permitted—exactly 14 units must be furnished. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, containment types, and packaging codes, and all marking shall adhere to MIL-STD-129 without special markings. Palletization follows DLA packaging requirements, and shipment must be sent to the designated receiving warehouse in Tracy, California. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for limited exceptions such as functional mercury in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment barrier compliant with NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. Transportation instructions follow DLA Procurement Notes C19 and C20, and the unit of issue is aligned with ANSI X12 standards. The primary point of contact is Michael Reese, and the solicitation was posted on July 20, 2026, with responses due by July 31, 2026.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

VALVE, VENTThe contract specifies the procurement of a VALVE, VENT with NSN 4820-01-719-3374 and part number R5520401-A2 or R5520601-A2 from Electric Boat Corporation, requiring delivery of one unit within five days under FOB origin terms with zero variance in quantity. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards such as ASTM D3951. Packaging must comply strictly with MIL-STD-129 labeling and RP001 DLA Packaging Requirements for Procurement, with palletization following those same guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless already authorized by specification. Delivery is to be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated government facility in N Stonington, Connecticut. The contract is a total small business set-aside under NAICS code 332911, issued as a solicitation by the Department of Defense’s Maritime Supply Chain under solicitation number SPE7M1-26-T-219P, with a response deadline of July 31, 2026, and primary point of contact provided as Misty Eckard.

Industrial Valve Manufacturing

POSTED

about 5 hours ago

DEADLINE

GRILLE, REAR, HOODThe contract is for the procurement of 21 units of a rear grille for a hood, identified by NSN 4310-01-584-3027 and part number 158-72261, sourced from approved suppliers Parts Life Inc and Atlas Copco Hurricane LLC DBA. The item is to be delivered in 213 days from the contract award, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, with all packaging and labeling subject to DLA’s Master List of Technical and Quality Requirements, which override any conflicting standards. Palletization must adhere to RP001: DLA Packaging Requirements for Procurement. The delivery address is DDSP New Cumberland Facility in New Cumberland, Pennsylvania, and the unit of issue is each, with a total price of $441.00 at $21.00 per unit. The contract is governed by the DLA solicitation SPE7M1-26-T-219L, issued on July 20, 2026, with responses due by July 31, 2026. The NAICS code is 333912, under the Department of Defense’s Maritime Supply Chain, and the primary point of contact is Michael Reese. The required ship date is March 2, 2027, with the original delivery deadline set for October 14, 2026. Transport and shipping instructions are governed by DLAD Proc Notes C19 and C20.

Air and Gas Compressor Manufacturing

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, EThis contract involves the procurement of a precision electrical connector, receptacle type, identified by NSN 5935014604596 and part number D38999/24WJ20SB, governed by MIL-DTL-38999N Revision N dated September 14, 2023, and TDP Rev A Gen 1. The item is classified as a qualified product under the Qualified Products List for Federal Stock Class 5935, meaning only manufacturers pre-qualified per procurement note H01 are eligible. Manufacturing traceability is mandatory, with materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 explicitly prohibited regardless of condition, and traceability documentation may be requested before or after award. The use of any Class I ozone-depleting substances in design, manufacturing, testing, or cleaning is strictly prohibited unless prior written approval from the contracting officer is obtained, and this prohibition overrides all other specification requirements while maintaining performance standards. The item is designated as critical application and must be delivered FOB origin with no variance allowed in quantity—exactly ten units at a unit price not specified, delivered in 81 days. Packaging and labeling must strictly adhere to MIL-STD-129, with hazardous materials packaged per IP025 and non-hazardous materials per ASTM D3951, though all DLA Master List requirements supersede ASTM standards. Palletization must comply with RP001, and bare items must be permanently marked with CAGE code and lot/date codes as required by RQ017. The contract type is an indefinite-delivery vehicle under the Department of Defense’s Maritime Supply Chain with a ceiling value of $350,000 and a guaranteed minimum of one unit. Inspections and acceptances occur at destination, and all deliveries must be invoiced through WAWF. Compliance with federal cybersecurity standards, including NIST SP 800-171 and FAR 52.204-7012, is required alongside flow-down obligations to subcontractors, including hazardous material reporting and U.S.-flag vessel use for international shipments, which demands advanced waiver requests if applicable. Contractors must affirm their size status, UEI, and CAGE code, and represent compliance with anti-trafficking, employment eligibility, sustainable product, and whistleblower rights provisions. No attachments are formally

Nonferrous Forging

POSTED

about 5 hours ago

DEADLINE

ADAPTER, CONNECTORThe contract pertains to the procurement of an adapter connector with NSN 5935-01-544-9573 and part number 941-005NFF35SN-98, issued under solicitation SPE7M1-26-U-4487 by the Department of Defense through the Maritime Supply Chain. The requirement is for 16 units at $16.00 each, delivered FOB origin within 53 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination. Technical and quality requirements are governed entirely by the DLA Master List of Technical and Quality Requirements, with specific references to MIL-STD-1916 or ASQ H1331 for sampling, mandating zero non-conformances unless otherwise stated. Attributes are classified with verification levels or AQLs of VII IV II or 0.1 1.0 4.0 respectively, and unspecified attributes default to major. Packaging must conform to MIL-STD-129 and RP001 DLA packaging standards, with hazardous materials following FED-STD-313 and IP025, while nonhazardous items adhere to ASTM D3951 unless superseded by DLA requirements. Bare item marking and government identification removal are required under RQ017 and RQ011 respectively. Palletization must comply with DLA guidelines, and the unit of issue is EA. The contract is managed by Bryan Fair at DLA with a response deadline of August 4, 2026.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

JACK BOXThe contract solicitation for the JACK BOX under NSN 5935-01-572-5631 with a quantity of 77 units is issued by the Department of Defense’s Maritime Supply Chain under solicitation number SPE7M1-26-U-4489, with a response deadline of August 4, 2026. The procurement is structured as a simplified acquisition with an indefinite delivery contract framework and a maximum contract value of $350,000. Delivery is required within 73 days after order placement under FOB Origin terms, with inspection and acceptance occurring at the destination. All supplies must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the use of 2D Data Matrix barcodes. Packaging must be clean and dry using preservation method 31 with no additional preservation materials, and must be unit packed in E5 containers with sixteen intermediate containers. Physical identification of bare items per RQ017 is mandatory, and government identification must be removed from non-accepted supplies. The use of mercury or mercury-containing compounds is strictly prohibited unless exempted for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shockproof construction and a second containment boundary as per NAVSEA 5100-003D. Class I ozone-depleting substances are forbidden in all phases of production and cleaning unless written approval is obtained from the Contracting Officer, with this restriction overriding but not relaxing any performance requirements. The contractor must comply fully with the DLA Master List of Technical and Quality Requirements, referencing all applicable R and I numbers. Hazard communication requirements under 29 CFR 1910.1200 must be met with proper labeling and submission of Material Safety Data Sheets before award, and labels must conform to DFARS 252.223-7001 and MIL-STD-129. Radioactive materials exceeding 0.002 microcuries per gram or 0.01 microcuries total activity must be clearly identified per MIL-STD-129. The contract incorporates multiple FAR and DFARS clauses including equal opportunity, combating trafficking, employment eligibility verification, sustainable products, safeguarding of contractor information systems, NIST SP 800-171 DOD assessment

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

CONNECTOR, RECEPTACLE, EThis contract solicitation, identified as SPE7M1-26-U-4481, seeks the supply of an electrical receptacle connector with NSN 5935004624724, conforming to the specifications of Amphenol Corp part number 348-33E18-85S1. The requirement is for an estimated quantity of 39 units under an indefinite-delivery contract mechanism with a total contract ceiling of $350,000, though no guaranteed purchase volume is specified. Delivery must be completed within 113 days after order issuance, with FOB Origin terms placing transportation risk on the contractor until the item reaches the designated destination within the continental United States. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2. Packaging and preservation must comply with MIL-STD-2073-1E using QUP 001, preservation method 31, and climate control level 1, while marking must adhere to MIL-STD-129 with no special markings required. The item must be physically identified and labeled according to DLA requirements RQ017 and must not contain any intentional mercury except for exempted functional uses such as batteries, fluorescent lamps, sensors, or specified reagents, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The use of Class I ozone-depleting substances is strictly prohibited unless prior written approval is obtained from the Contracting Officer. Compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers is mandatory, and the contractor must affirm representations regarding small business status, unique entity identifier, CAGE code, and compliance with prohibitions on covered telecommunications equipment and human trafficking. All invoicing and payment processing must be conducted through the Wide Area WorkFlow system in accordance with DFARS clauses, and the contractor is bound by multiple safeguarding and cybersecurity clauses including 252.204-7012 for protected defense information. The evaluation will be price-driven, with preference potentially given to HUBZone small businesses, though no non-price factors are formally stated, implying a Low Price Technically Acceptable approach.

Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

BRAID, WIREThe contract pertains to the procurement of braid wire identified by NSN 6145145294064 and part number 62530687AA, with a quantity of 33 units issued as each (EA), under solicitation SPE7M1-26-U-4491. Delivery is required within 68 days FOB origin, with no tolerance for quantity variance—both plus and minus zero percent—and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation of cable, cord, and wire, with marking adhering to MIL-STD-129 and palletization governed by DLA’s packaging requirements. Sampling follows MIL-STD-1916 or an approved zero-based plan, with critical attributes subject to the most stringent verification levels and zero non-conformances required unless otherwise specified. This is a critical application item procured under DLA Direct, CONUS coverage, and the unit of issue aligns with DoD standards. The material is governed by overarching technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue or award date depending on acquisition size. The contract includes detailed packaging codes, preservation methods, and special marking instructions, all marked as zero or unspecified where not defined. The purchase request number is 1000237620, and the contract is administered by the Department of Defense under the Maritime Supply Chain organizational structure, with primary point of contact Bryan Fair. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and is classified under NAICS code 335929 for other electrical equipment and component manufacturing. The quantity listed is estimated and not guaranteed for purchase by the IDC.

Other Communication and Energy Wire Manufacturing

POSTED

about 5 hours ago

DEADLINE

SOLENOID, ELECTRICALThe contract is for the procurement of 30 solenoids, electrical, identified by NSN 5945-00-407-7030, under solicitation number SPE7M1-26-U-4483, with a deadline for responses on August 4, 2026. This is a Women-Owned Small Business Set-Aside with a NAICS code of 333612, managed by the Department of Defense through the Maritime Supply Chain. Delivery is required within 61 days after delivery order issuance. All supplies must comply with the DLA Master List of Technical and Quality Requirements, with applicable standards referenced by R or I numbers incorporated by full text. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses in batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. The government will not accept supplies with government identification removed if rejected, and the alternate offeror must submit a complete data package including technical data for both the primary and alternate parts.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 5 hours ago

DEADLINE