Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Electrical Wire Supply – Continuous Length Spools (SAE AS22759E Compliance)

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of 68,856 feet of electrical wire in continuous lengths, wound on 500-foot spools, fully compliant with SAE AS22759E Revision E specifications. The wire must meet stringent military standards for traceability, ensuring each spool is uniquely identified and documented throughout production and delivery. Packaging and labeling must adhere to military requirements, with all materials properly identified, secured, and labeled for handling, storage, and transportation. Compliance with hazardous materials regulations is mandatory, including proper documentation and adherence to DOT and military transport protocols for any substances classified as hazardous. The contract is classified as a subcontract under the NAICS code 335999 and is issued by the Department of Defense through the Maritime Supply Chain. Performance is required at New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 19, 2026, and responses must be submitted by July 30, 2026. All deliverables must be ready for immediate acceptance upon delivery, with no deviations from the technical, packaging, or documentation requirements accepted without prior written authorization. Full compliance with all federal acquisition and defense supply chain mandates is mandatory for contract award and execution.

General Info

Supply 68,856 feet of SAE AS22759E wire on 500-ft spools, compliant with military traceability and packaging standards for DoD delivery to New Cumberland, PA by July 30, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Supply of 68,856 feet of electrical wire in continuous lengths on 500 ft/spools, compliant with SAE AS22759E Rev E, including full traceability, military-standard packaging, labeling, and hazardous materials compliance.

Similar Contracts

Same NAICS industry code

NAICS: 335999
New
DIBBS
TAPE, INSULATION, ELECTRElectrical insulation tape, black, 2 inches wide, 108 feet per roll, is being procured under solicitation SPE4A6-26-T-07UY with NSN 5970-00-230-5124. The contract requires 10 rolls to be delivered within 20 days FOB origin, with no variance allowed in quantity. All items must meet Type I shelf life standards of 18 months and be marked in accordance with MIL-STD-129R, including special labeling for Type II shelf life. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, with individual units packed in be box containers, intermediate containers marked E5, and no cushioning material used. The product must conform to ASTM D4514 Rev 12 and is subject to zero-defect sampling under MIL-STD-1916 or equivalent zero-based sampling plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. Delivery is to a military facility in El Salvador, with shipments required to be sent via the fastest traceable means—parcel post is prohibited. Inspection and acceptance occur at destination. The contract is governed by DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers, and all documentation must align with current revisions effective at the time of solicitation issuance. The point of contact for inquiries is Amanda Stewart at the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
INSULATION SLEEVING, ELThis contract specifies the procurement of electrical insulation sleeving, special purpose, with part number SSC-2/239 and NSN 5970-01-014-3523, for a quantity of 569 units at a unit price of $569.00, totaling $324,061.00. The item must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards such as ASTM D3951. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are to be classified with specific verification levels or AQLs. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls,_weapon systems, or NAVSEA-specified reagents, with portable devices containing mercury requiring shockproof design and a secondary containment barrier as per NAVSEA 5100-003D. Packaging must follow DLA’s RP001 requirements and MIL-STD-129 labeling standards, with hazardous material packaged in accordance with TQ requirement IP025 if deemed hazardous under FED-STD-313, or commercially packaged per ASTM D3951 if not. Palletization and unit of issue must align with contract specifications, and all packaging must be marked appropriately. The item is to be delivered FOB origin within 158 days of contract award, with delivery addressed to DLA District San Joaquin at Tracy, CA. Inspection and acceptance occur at the destination, and no quantity variance is allowed. Unit Identification is not required per DFARS 252.211-7003(c)(1)(i), and the supplier must be TYCO Thermal Controls LLC or TE Connectivity Corporation with CAGE code 06090. The solicitation number is SPE4A6-26-T-07VG, with a response deadline of July 28, 2026, and the item is classified under NAICS 335999. The contracting point of contact is Jessica Fuentes-OSSIO, and the delivery deadline is January 3, 2027.
ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThis contract, issued by the Defense Logistics Agency under solicitation SPE7L7-26-T-4376, specifies the procurement of one Power Supply unit with NSN 6130-01-506-5866 and part number 14AH, supplied by Electric Boat Corporation. The item must comply with stringent DLA packaging, marking, and quality requirements including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA’s Master List of Technical and Quality Requirements referenced by R and I numbers. The product is classified as a Type I shelf-life item with a non-extendable 12-month shelf life, requiring SDS documentation per FED-STD-313 and special shelf-life labeling. It is subject to zero tolerance for non-conformances under sampling plans based on MIL-STD-1916 or ASQ H1331, and all attributes not otherwise specified are treated as major. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted, such as within functional batteries or specific instruments, and any portable devices containing mercury must have shock-proof construction with a secondary containment. Delivery is required FOB origin within five days of contract award, with inspection and acceptance occurring at the destination. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, and delivered to Electric Boat Corporation in N Stonington, CT. The contract mandates compliance with CMMC Level 2 Cybersecurity Self-Assessment and prohibits intentional introduction of hazardous materials. Unit of issue is EA, with no quantity variance permitted. All packaging and palletization must adhere to RP001 DLA packaging standards. The supplier is required to meet all technical and quality provisions referenced without exception, and the delivery must occur no later than July 14, 2026, with shipping documentation tied to the provided contract and freight identifiers.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLYThe contract pertains to the procurement of a single power supply unit with NSN 6130-01-583-6348, delivered in a quantity of one unit under solicitation SPE7L7-26-T-4373, with a required delivery date of June 15, 2026, and a 20-day delivery window from origin under FOB origin terms. All supplies must comply with the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951, and packaging must follow MIL-STD-129 and RP001 guidelines, ensuring unit packaging and palletization meet DLA specifications. The item must be free of intentional mercury or mercury compounds, with exceptions limited to functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or naval-specified reagents, and any portable devices containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection adhere strictly to zero-defect acceptance criteria using MIL-STD-1916 or equivalent zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Inspection and acceptance occur at destination, and no quantity variance is permitted. The unit must be shipped via traceable freight to the designated Virginia Beach address, strictly avoiding parcel post. All marking, labeling, and documentation must conform to federal requirements, and the item is subject to defense information handling protocols under RD003.
Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335999
New
Federal
NG SEW-ELECTRICAL COMPONENTSThe U.S. Department of Defense, through the Army Contracting Command – Rock Island, is soliciting electrical components for the Next Generation Shop Equipment Welding program under solicitation W519TC26QA164, with offers due by July 3, 2026. The acquisition is a total small business set-aside, exclusively reserved for Women-Owned Small Businesses, Economically Disadvantaged Women-Owned Small Businesses, and 8(a) firms, and is governed by FAR 19.5 with a NAICS code of 335999. The contract requires delivery of five specific items: 167 Channel Struts, 38 NEMA 4 Single Door Enclosures, 38 Circuit Breaker Load Centers, 300 Flexible Conduits, and 38 Electrical Cables with precise technical specifications including 5 conductors, 2 AWG size, 133 strands, and defined insulation and jacket dimensions. All items must strictly conform to attached engineering drawings, with drawing specifications overriding any manufacturer part numbers or catalog references. Technical compliance is mandatory and must be supported by a Certificate of Conformance, and contractors must be registered in the System for Award Management (SAM) with all required representations completed, including those related to cybersecurity, prohibited activities, and tax compliance. The contract employs a Firm Fixed Price arrangement and will be awarded on a Lowest-Price Compliant Offer basis, meaning award will go to the most responsive and responsible offeror with the lowest total evaluated price, contingent upon meeting all pass/fail gates for technical compliance, certification, and responsibility. Deliveries are due no later than August 4, 2026, to the Rock Island Arsenal Joint Manufacturing and Technology Center in Rock Island, Illinois, under FOB Destination terms with the contractor responsible for all transportation and shipping costs. Inspection and acceptance will occur at destination by the Government at BLDG 299, Rock Island. The contractor must comply with NIST SP 800-171, DFARS 252.204-7012, and DFARS 252.204-7008 for safeguarding covered defense information and cyber incident reporting, and adhere to numerous FAR and DFARS clauses concerning human trafficking, convex labor, sustainable products, equal opportunity, whistleblower protections, and export controls. Payment will be processed via Wide Area WorkFlow using specified DoDAACs, including HQ03
W6QK Acc-Ri

POSTED

about 10 hours ago

DEADLINE

in about 1 year
View Details
NAICS: 335999
New
Federal
Combined Sources Sought Notice and Notice of Intent to Award a Sole Source Contract for Voltage Dividers with Buffer Amplifiers and SwitchThe National Institute of Standards and Technology (NIST) is seeking information from potential vendors to assess market availability and competition for five specific technical items: three precision resistive voltage dividers with a 0.001 ratio for 500V, three with a 0.003 ratio for 330V, three with a 0.006 ratio for 166V, three precision buffer amplifiers, and one computer-controlled switch. Each voltage divider must meet precise electrical specifications including input resistance, frequency range, ac-dc transfer difference, and phase error, and must be delivered with connecting cables, calibration certificates, and manuals. The buffer amplifiers must handle up to 5 Vrms with specific impedance and ac-dc accuracy requirements across frequencies up to 100 kHz and include both AC power and external DC battery inputs. The switch must be a double pole double throw unit with remote and manual control, LED status indication, USB connectivity, fast switching under 5 ms, and low on-resistance repeatability, accompanied by LabView drivers. NIST has not yet decided on its acquisition approach and is conducting market research to determine whether sufficient capable and interested commercial sources exist beyond a currently referenced entity, making this a pre-solicitation effort to evaluate competition. Respondents are asked to voluntarily submit detailed information including company profiles, SAM.gov registration status, NAICS code compliance, product specifications and origins, and whether items meet definitions of commercial or COTS products and services. Pricing data, standard commercial terms, warranty details, and supply chain compliance with FAR Clause 52.219-14 are requested along with any suggestions to enhance clarity, competitiveness, and domestic content. NIST is also seeking to learn if vendors hold federal contract vehicles such as GSA MAS that could be used for potential award. All responses must be provided by the August 4, 2026 deadline in specified formats and must exclude proprietary or classified information. Participation does not guarantee a contract award, and NIST retains the right to use all submitted data to inform final requirements or acquisition strategy, which may include issuing a public solicitation on SAM.gov or eBuy if competition is viable. No obligation exists to respond to this notice, and no feedback or acknowledgment will be provided to submitters.
Department Of Commerce Nist

POSTED

about 10 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334417
New
DIBBS
CONNECTOR, PLUG, ELECTRIThe contract solicitation SPE7M126U4482 seeks the procurement of 265 electrical plug connectors with NSN 5935011143439 under an indefinite delivery contract structure, with delivery required within 102 days after order placement and FOB origin terms. The item is a qualified product listed under Federal Stock Class 5935, requiring compliance with qualification standards outlined in procurement note H01 and technical specifications MIL-DTL-83723/69B(2) and MIL-DTL-83723H(4). The connector is designated as a critical application item and is subject to strict prohibitions against the use of any Class I ozone-depleting substances in its design, manufacturing, or testing unless prior written consent is obtained from the contracting officer; this prohibition overrides all other specification requirements but does not waive performance obligations. The contract mandates that packaging and marking strictly adhere to MIL-STD-129 for labeling and barcoding, with hazardous materials compliant with FED-STD-313 and TQ requirement IP025, while non-hazardous items must follow ASTM D3951 — though all DLA Master List technical and quality requirements take precedence. Palletization must conform to RP001, and bare item marking must satisfy RQ017. Inspection and acceptance occur at the destination, with the government assuming responsibility for both functions. The contract incorporates a comprehensive suite of FAR and DFARS clauses covering equal opportunity, human trafficking, employment eligibility, sustainable products, hazardous material safety, cybersecurity (including NIST SP 800-171 and safeguarding covered defense information), subcontracting, payment processing, export control, and prohibitions on hexavalent chromium and defense telecommunications from sanctioned entities. Payment is processed exclusively through Wide Area WorkFlow, and all offers must be submitted electronically via DIBBS by the August 4, 2026 deadline. The contract is competitively awarded under full and open competition, with no set-aside, and the estimated contract value per order is capped at $350,000, though no unit price is specified, leaving the actual financial obligation contingent upon future order quantities and pricing. The contractor must also comply with all representations required under Section K, including disclosure of unique entity identifiers, CAGE codes, and socioeconomic status if applicable, and must verify eligibility for federal contracts through Employment Eligibility Verification and
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
PLATE, RETAINING, ELECTRThe contract governs the procurement of a retaining plate for electrical connectors, identified by NSN 5935013637382, under solicitation SPE7M1-26-U-4485, issued by the Department of Defense’s Maritime Supply Chain. The item is classified as a qualified product requiring compliance with the Qualified Products List (QPL) for Federal Stock Class 5935 connector assemblies and contacts, as defined in procurement note H01, and must conform to the non-government standard SAE AS85049F Revision F dated April 1, 2021, with part number M85049/95-24A-A. The contract specifies an estimated quantity of 120 units with a guaranteed minimum of 18 units and a maximum contract value of $350,000, structured as an indefinite-delivery contract where orders will be issued periodically under a bilateral framework. All deliveries are FOB origin, with a performance timeline of 131 days after award, and inspection and acceptance occur at the destination under FAR 52.246-2. Packaging and marking must adhere to MIL-STD-129, with hazardous materials handled per FED-STD-313 and TQ Requirement IP025, while non-hazardous materials follow ASTM D3951, though DLA’s Master List of Technical and Quality Requirements supersedes all others. Palletization must comply with RP001, and bare item marking is required per RQ017. The use of any Class I ozone-depleting substances is strictly prohibited without written consent from the contracting officer, a restriction that overrides other specifications but does not excuse product performance requirements. The contract imposes extensive cybersecurity, compliance, and procedural obligations. Contractors must adhere to NIST SP 800-171 controls, safeguard covered defense information per 252.204-7012, and report cyber incidents in accordance with DoD mandates, while also complying with restrictions on covered telecommunications equipment under 252.204-7018. Labor and ethics requirements include whistleblower protections, prohibitions on trafficking in persons, and employment eligibility verification. Invoicing must be submitted exclusively via Wide Area WorkFlow using permitted document types, and contractors are required to maintain active registration in the System for Award Management. All representations and certifications must
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 333310
New
DIBBS
ARM ASSY, WIPERThis contract pertains to the procurement of an ARM ASSY, WIPER with NSN 1240-01-592-3242 and part number 8242175, under solicitation SPE7M1-26-T-219J. The supplier, L3 TECHNOLOGIES, INC., is required to deliver 14 units, each priced at $14.00, for a total value of $196.00, with delivery due within 202 days from the contract award, no later than February 19, 2027. Delivery is FOB origin, with inspection and acceptance occurring at destination, and no variance in quantity is permitted—exactly 14 units must be furnished. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, containment types, and packaging codes, and all marking shall adhere to MIL-STD-129 without special markings. Palletization follows DLA packaging requirements, and shipment must be sent to the designated receiving warehouse in Tracy, California. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for limited exceptions such as functional mercury in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, and chemical reagents specified by NAVSEA. Portable fluorescent lamps and instruments containing mercury must include shock-proof construction and a secondary containment barrier compliant with NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. Transportation instructions follow DLA Procurement Notes C19 and C20, and the unit of issue is aligned with ANSI X12 standards. The primary point of contact is Michael Reese, and the solicitation was posted on July 20, 2026, with responses due by July 31, 2026.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACLE, EThis contract involves the procurement of a precision electrical connector, receptacle type, identified by NSN 5935014604596 and part number D38999/24WJ20SB, governed by MIL-DTL-38999N Revision N dated September 14, 2023, and TDP Rev A Gen 1. The item is classified as a qualified product under the Qualified Products List for Federal Stock Class 5935, meaning only manufacturers pre-qualified per procurement note H01 are eligible. Manufacturing traceability is mandatory, with materials produced by Amphenol, Matrix, or Pyle National between July 2006 and June 2016 explicitly prohibited regardless of condition, and traceability documentation may be requested before or after award. The use of any Class I ozone-depleting substances in design, manufacturing, testing, or cleaning is strictly prohibited unless prior written approval from the contracting officer is obtained, and this prohibition overrides all other specification requirements while maintaining performance standards. The item is designated as critical application and must be delivered FOB origin with no variance allowed in quantity—exactly ten units at a unit price not specified, delivered in 81 days. Packaging and labeling must strictly adhere to MIL-STD-129, with hazardous materials packaged per IP025 and non-hazardous materials per ASTM D3951, though all DLA Master List requirements supersede ASTM standards. Palletization must comply with RP001, and bare items must be permanently marked with CAGE code and lot/date codes as required by RQ017. The contract type is an indefinite-delivery vehicle under the Department of Defense’s Maritime Supply Chain with a ceiling value of $350,000 and a guaranteed minimum of one unit. Inspections and acceptances occur at destination, and all deliveries must be invoiced through WAWF. Compliance with federal cybersecurity standards, including NIST SP 800-171 and FAR 52.204-7012, is required alongside flow-down obligations to subcontractors, including hazardous material reporting and U.S.-flag vessel use for international shipments, which demands advanced waiver requests if applicable. Contractors must affirm their size status, UEI, and CAGE code, and represent compliance with anti-trafficking, employment eligibility, sustainable product, and whistleblower rights provisions. No attachments are formally
Nonferrous Forging

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
JACK BOXThe contract solicitation for the JACK BOX under NSN 5935-01-572-5631 with a quantity of 77 units is issued by the Department of Defense’s Maritime Supply Chain under solicitation number SPE7M1-26-U-4489, with a response deadline of August 4, 2026. The procurement is structured as a simplified acquisition with an indefinite delivery contract framework and a maximum contract value of $350,000. Delivery is required within 73 days after order placement under FOB Origin terms, with inspection and acceptance occurring at the destination. All supplies must comply with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including the use of 2D Data Matrix barcodes. Packaging must be clean and dry using preservation method 31 with no additional preservation materials, and must be unit packed in E5 containers with sixteen intermediate containers. Physical identification of bare items per RQ017 is mandatory, and government identification must be removed from non-accepted supplies. The use of mercury or mercury-containing compounds is strictly prohibited unless exempted for specific functional applications such as batteries, fluorescent lights, sensors, weapon systems, or NAVSEA-specified chemical reagents, with portable fluorescent lamps and instruments requiring shockproof construction and a second containment boundary as per NAVSEA 5100-003D. Class I ozone-depleting substances are forbidden in all phases of production and cleaning unless written approval is obtained from the Contracting Officer, with this restriction overriding but not relaxing any performance requirements. The contractor must comply fully with the DLA Master List of Technical and Quality Requirements, referencing all applicable R and I numbers. Hazard communication requirements under 29 CFR 1910.1200 must be met with proper labeling and submission of Material Safety Data Sheets before award, and labels must conform to DFARS 252.223-7001 and MIL-STD-129. Radioactive materials exceeding 0.002 microcuries per gram or 0.01 microcuries total activity must be clearly identified per MIL-STD-129. The contract incorporates multiple FAR and DFARS clauses including equal opportunity, combating trafficking, employment eligibility verification, sustainable products, safeguarding of contractor information systems, NIST SP 800-171 DOD assessment
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334417
New
DIBBS
CONNECTOR, RECEPTACLE, EThis contract solicitation, identified as SPE7M1-26-U-4481, seeks the supply of an electrical receptacle connector with NSN 5935004624724, conforming to the specifications of Amphenol Corp part number 348-33E18-85S1. The requirement is for an estimated quantity of 39 units under an indefinite-delivery contract mechanism with a total contract ceiling of $350,000, though no guaranteed purchase volume is specified. Delivery must be completed within 113 days after order issuance, with FOB Origin terms placing transportation risk on the contractor until the item reaches the designated destination within the continental United States. Inspection and acceptance occur at the destination point, governed by FAR 52.246-2. Packaging and preservation must comply with MIL-STD-2073-1E using QUP 001, preservation method 31, and climate control level 1, while marking must adhere to MIL-STD-129 with no special markings required. The item must be physically identified and labeled according to DLA requirements RQ017 and must not contain any intentional mercury except for exempted functional uses such as batteries, fluorescent lamps, sensors, or specified reagents, with portable mercury-containing devices requiring shockproof design and a secondary containment boundary per NAVSEA 5100-003D. The use of Class I ozone-depleting substances is strictly prohibited unless prior written approval is obtained from the Contracting Officer. Compliance with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers is mandatory, and the contractor must affirm representations regarding small business status, unique entity identifier, CAGE code, and compliance with prohibitions on covered telecommunications equipment and human trafficking. All invoicing and payment processing must be conducted through the Wide Area WorkFlow system in accordance with DFARS clauses, and the contractor is bound by multiple safeguarding and cybersecurity clauses including 252.204-7012 for protected defense information. The evaluation will be price-driven, with preference potentially given to HUBZone small businesses, though no non-price factors are formally stated, implying a Low Price Technically Acceptable approach.
Electronic Connector Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335929
New
DIBBS
BRAID, WIREThe contract pertains to the procurement of braid wire identified by NSN 6145145294064 and part number 62530687AA, with a quantity of 33 units issued as each (EA), under solicitation SPE7M1-26-U-4491. Delivery is required within 68 days FOB origin, with no tolerance for quantity variance—both plus and minus zero percent—and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-12000 for preservation of cable, cord, and wire, with marking adhering to MIL-STD-129 and palletization governed by DLA’s packaging requirements. Sampling follows MIL-STD-1916 or an approved zero-based plan, with critical attributes subject to the most stringent verification levels and zero non-conformances required unless otherwise specified. This is a critical application item procured under DLA Direct, CONUS coverage, and the unit of issue aligns with DoD standards. The material is governed by overarching technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation issue or award date depending on acquisition size. The contract includes detailed packaging codes, preservation methods, and special marking instructions, all marked as zero or unspecified where not defined. The purchase request number is 1000237620, and the contract is administered by the Department of Defense under the Maritime Supply Chain organizational structure, with primary point of contact Bryan Fair. The solicitation was posted on July 20, 2026, with responses due by August 4, 2026, and is classified under NAICS code 335929 for other electrical equipment and component manufacturing. The quantity listed is estimated and not guaranteed for purchase by the IDC.
Other Communication and Energy Wire Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details