Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electro-Mechanical Actuator Repair and Overhaul (OEM-Level)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the complete repair, overhaul, testing, and certification of 44 electro-mechanical actuators, identified by part number 825800-5, which are classified as Critical Safety Items. The work must be performed at an Original Equipment Manufacturer (OEM) level, ensuring adherence to strict design control and traceability requirements throughout the process. This highlights the necessity for high-quality workmanship and rigorous oversight to maintain safety and reliability standards. Awarded by the Department of Defense through the Pa DLA Aviation office in Philadelphia, the subcontract work is to be carried out in Windsor Locks, Connecticut. The contract falls under the NAICS code 336412, focusing on aircraft engine and engine parts manufacturing, reflecting the specialized nature of the components involved. The scope emphasizes ensuring that the actuators meet all necessary operational and safety certifications before being returned to service.

General Info

Repair, overhaul, test, and certify 44 critical electro-mechanical actuators at OEM level for DoD.

Agency

Department Of Defense → Pa DLA Aviation At PhiladelphiaView Agency

NAICS

336412 - Aircraft Engine and Engine Parts ManufacturingView NAICS

Place of Performance

Windsor Locks, CT, 06096, USA

Set-Aside

NONE

Documents

This scope was carved out of SPRPA126FEH0Y.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

16--ACTUATOR,ELECTRO-ME

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 10

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Pa DLA Aviation At Philadelphia

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Pa DLA Aviation At Philadelphia

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Complete repair, overhaul, testing, and certification of 44 electro-mechanical actuators (P/N 825800-5) designated as Critical Safety Items, requiring OEM-level work under design control and traceability.

Similar Contracts

Same NAICS industry code

Supply of Ferrule, Exciter-Rec

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

Fuel Pressure Valve Production (NSN: 2915008960173ok)

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Aerospace Asset Remanufacture Services

FA8122 Afsc Pzaab

POSTED

DEADLINE

Control, Exhaust Noz (3B)

Solicitation # SPRTA126R1778

The Department of Defense, through the DLA Aviation office at Oklahoma City, is seeking a procurement for Exhaust Nozzle Controls (NSN 2995014502816NZ) for F100 engines. The requirement is for 28 units, with a flexible quantity range between 14 and 42 units, to be delivered to Tinker AFB by December 31, 2026. These cast aluminum components serve as an integral part of the primary actuator convergent nozzle for the Main Fuel Control, which manages fuel delivery to the engine. The solicitation, identified as SPRTA126R1778, was posted on September 11, 2026, with a response deadline of September 26, 2026. The government intends to solicit this requirement under FAR 6.302 for limited sources, identifying Honeywell International Inc. as a qualified source. Award decisions will be based on a combination of price and past performance, with price being a significant evaluation factor. Item Unique Identification requirements apply if the unit price exceeds 5,000 dollars. Interested parties must identify their capability to satisfy the requirement with a commercial item within 15 days of the notice. All inquiries and proposals should be directed to the buyer, Rhonda Griffin.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Support, Turbine Noz (1C)

Solicitation # SPRTA126R1091

The contract solicitation SPRTA126R1091 pertains to the procurement of a Turbine Stator Support Assembly (TOBI), identified by NSN 2840015454839NZ and part number 4088292, for use on the F100 engine under the Department of Defense. This is a presolicitation notice indicating a sole source acquisition under FAR 6.302-1, justified by the limited number of qualified sources—specifically Union Machine Co and Raytheon Technologies Corporation—who are pre-approved for this component. The requirement calls for eight units of the assembly with a minimum of three and maximum of fifteen units possible, alongside two units for first article testing, one unit for evaluation by an alternate source, and mandatory submission of a First Article Test Plan and Test Report. All deliveries must be completed by May 1, 2028, at Tinker Air Force Base, Oklahoma, with the designated delivery point identified as SW3211. The procurement explicitly prohibits commercial item acquisition procedures under FAR Part 12 and instead follows full negotiated procedures under FAR Part 15. The contract includes stringent requirements for Item Unique Identification (IUID), export control compliance, and mandatory First Article Contractor Testing for all non-OEM suppliers. Price is a significant evaluation factor alongside technical capability and past performance in a trade-off selection process, though no numerical weights or adjectival ratings are disclosed. Proposals must be submitted electronically via SAM.gov by the deadline of July 8, 2026, with no hardcopy submissions accepted. Payment is dependent on appropriated funds, and the sole point of contact for inquiries is Rhonda Ehrhardt at the Oklahoma City DLA Aviation office. The acquisition involves no small business set-aside and imposes no option periods or security clearance requirements, focusing instead on strict adherence to military specifications, traceability standards, and qualified source limitations.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

29--HOUSING,ACTUATOR,VA

Solicitation # SPE4A5-26-T-419Q

Solicitation SPE4A5-26-T-419Q is a fixed-price request for quotations issued by the Department of Defense, specifically the DLA Aviation ASC Supplier Oper OEM Division, for the procurement of 71 units of actuator housings under NSN 2995007725869. The procurement falls under NAICS code 336412. Quotes must be submitted electronically via the DIBBS system by September 18, 2026. The approved source for this item is 59364 112453-1. The contract requires delivery to the DLA Distribution Depot Oklahoma at Tinker AFB, with a delivery period of 179 days and a required delivery date of September 14, 2026. Inspection and acceptance will occur at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with specific requirements for palletization and hazardous material labeling. Payment will be processed electronically through the Wide Area Workflow system. Key compliance requirements include adherence to the Buy American Act, the Berry Amendment, and CMMC Level 2 Self-Assessment. The solicitation incorporates various FAR and DFARS clauses, including those regarding equal opportunity for workers with disabilities, combating trafficking in persons, and NIST SP 800-171 assessment requirements. Quality assurance will be managed through zero-based sampling plans such as MIL-STD-1916 or ASQ H1331.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

BEARING,ROLLER,CYLI

Solicitation # SPRTA126Q0373

This procurement request, identified by solicitation number SPRTA126Q0373, is for the acquisition of cylindrical roller bearings, part number 4035597. The government seeks a quantity of 20 units, with a minimum of 5 and a maximum of 33, to be delivered to destination SW3211 by January 31, 2027. This item is designated as a critical safety item and is subject to export controls, requiring first article inspection and specific qualification requirements. The solicitation is expected to be issued on September 28, 2026, and close on October 29, 2026. While the government has identified several approved sources, including RTX Corporation, The Timken Company, Schaeffler Aerospace Canada, SKF USA, and Industrial Tectonics Bearings, it is open to considering capability statements from other responsible sources. The contract is not a small business set-aside and involves technology with military or space applications. Final award decisions will be based on a combination of price, technical capability, and past performance.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

T-56 Amplifier, Electroni

Solicitation # SPRTA126Q1494

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

F108 Module 13/15 & 14 LPT Assembly (USAF/USN) Remanufacture

Solicitation # 2840-01-229-5786PN_2840-01-484-3913PN_2840-01-189-2941PN_2840-01-483-8785PN

The contract involves the remanufacture of F108 Module 13/15 and 14 Low-Pressure Turbine (LPT) assemblies for both the U.S. Air Force and U.S. Navy. It covers specific National Stock Numbers and part numbers associated with these modules, indicating a focus on critical engine components. This acquisition is competitive and open to qualified sources, emphasizing the importance of quality and compliance with military standards. The solicitation was posted on December 22, 2025, with a response deadline set for January 6, 2026. The contract is managed by the Department of Defense at Tinker Air Force Base in Oklahoma, with performance expected in South Coffeyville, Oklahoma. The NAICS code 336412 shows this is related to aerospace product and parts manufacturing, reflecting the contract’s technical nature. Points of contact include Brock May and Brad Bonsall, who can provide more information about the solicitation. There are no set-aside restrictions, suggesting the contract is open to all qualified bidders. This remanufacture effort underlines ongoing logistics and maintenance support for critical military aircraft engine components.

FA8122 Afsc Pzaab

POSTED

DEADLINE

NSN2840-01-696-1889_RingMount_F110_PN9530M56G18_FD2030-24-00209

Solicitation # FD2030-24-00209

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Fuel Pressure Valve_End_Item_J85_NSN_2915008960173OK_PN_37C301344G002

Solicitation # FD20302600142

The Department of the Air Force, through the 421st Supply Chain Management Squadron at Tinker AFB, is conducting market research via a Sources Sought Synopsis to identify potential sources for the procurement of fuel pressure valves for the J85 platform. The specific requirement concerns part number 37C301344G002 and NSN 2915008960173OK. This effort is a new spares buy without a repair requirement, and the government is seeking capable sources to provide all labor, materials, facilities, and equipment necessary for the new manufacture, inspection, testing, packaging, and shipping of these components. The government is interested in all business types, including large and various small business categories, under NAICS code 336412, which has a size standard of 1,500 employees. Potential sources must be prepared to meet strict manufacture qualification requirements for propulsion critical safety and application items, including providing detailed production documentation such as travelers and process operation sheets, and ensuring all equipment is properly calibrated. Interested vendors must submit their responses by September 18, 2026. This is currently a market research effort to determine the best acquisition strategy and potential for a small business set-aside; therefore, no solicitation is available at this time and no funds have been allocated for the information requested.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Pump, Fuel, Jet Engin (3B)

Solicitation # SPRTA126R1792

Solicitation SPRTA126R1792, issued by the Department of Defense DLA Aviation at Oklahoma City, seeks proposals for the new manufacture of Critical Safety Item fuel pumps for F110 jet engines. The requirement is for an estimated quantity of 58 units, with a flexible range between 14 and 87 units, to be delivered to Tinker AFB, OK, by May 31, 2027. The items are identified by NSN 2915013548333PR and part numbers 9338M20P08 / 5010069, and are constructed from aluminum alloy. Proposals are due by October 13, 2026, and the award decision will be based on a combination of price and past performance, with the Government utilizing the Supplier Performance Risk System for evaluation. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073 for preservation, MIL-STD-129 and MIL-STD-130 for marking and Item Unique Identification, and specific heat-treatment requirements for wooden packaging. Inspection and acceptance will occur at the origin via standard inspection, with all reporting and payment processing handled through the Wide Area Workflow system. Offerors must comply with the Buy American Act, cybersecurity maturity model certification requirements, and provide separate proposals for any non-recurring engineering expenses. The procurement is conducted under a limited source justification, with Hamilton Sundstrand Corporation listed as a qualified source.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

in about 1 month

More opportunities from Department Of Defense → Pa DLA Aviation At Philadelphia

Same awarding agency

81--CONTAINER,SHIPPING

Solicitation # SPRPA126RVC30

This solicitation is for the procurement of aluminum shipping containers, specifically part number 20140, to be manufactured according to Champion Company drawings. The contract is being extended to October 13, 2026, to promote competition. Key technical requirements include the use of specific weld fillers for 6061 and 5000 series aluminum, adherence to AWS welding standards, and the application of an electrodeposited alkaline Zinc-Nickel Alloy finish. Each container must feature a Unique Identification marking on a nameplate and include a specific amount of desiccant based on interior volume. A critical component of this contract is the First Article Testing (FAT) process, which includes dimensional inspections, a form and fit check with a T408-GE-400 engine, and a rigorous 18-inch free-fall drop test followed by pneumatic leak testing. New manufacturers may be subject to pre-award surveys and post-award conferences. While the government estimates first article testing costs at 12,000 dollars, all costs associated with the submission and shipment of FAT samples are the responsibility of the contractor. The contract also specifies strict chemical deoxidizing and mechanical cleaning procedures to be performed immediately prior to welding.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC10

This solicitation from the DLA Aviation office in Philadelphia is for the manufacture and delivery of aluminum containers according to drawing 875E001. The contract emphasizes strict quality control, requiring adherence to AWS welding standards and specific chemical deoxidizing and cleaning processes to prevent corrosion. Key technical requirements include the use of specific desiccant amounts, the application of Zinc-Nickel Alloy finishing instead of cadmium plating, and the installation of approved shock mounts. Each unit must feature a Unique Identification marking and follow a specific serial number convention. The agreement mandates a rigorous First Article Testing process, including dimensional inspections, a form and fit check, and a series of leak and 18-inch free-fall drop tests. All production units are also subject to a 100% production leak test following a drop test to ensure structural integrity. Contractors must provide their own tooling and manufacturing aids, and new manufacturers may be subject to pre-award surveys and post-award conferences due to the critical nature of the items.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

16--PUMP,WINDOW WASHER

Solicitation # SPRPA126QUB47

This solicitation, issued by the Department of Defense via DLA Aviation in Philadelphia, is for the procurement of window washer pumps under solicitation number SPRPA126QUB47. The closing date for responses is September 30, 2026. This requirement is issued under EAF authority and is specifically for non-CLSSA Foreign Military Sales, meaning the assets will be owned by customer countries rather than the U.S. Government. Consequently, standard Item Unique Identification and Valuation requirements are waived. Eligible suppliers must be government-approved sources providing newly manufactured spares; refurbished or repaired materials are strictly prohibited. All parts must be FAA-certified and accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Quality requirements include adherence to AS/EN/JISQ 9100 or an equivalent standard. Authorized distributors must provide a formal distributor letter on the source's letterhead at the time of proposal submission to be considered technically acceptable.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

15--DOOR,ACCESS,AIRCRAF

Solicitation # SPRPA126QUC06

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two aircraft access doors under contract NSN 7R-1560-017005796-P8. The acquisition is conducted as a commercial item procurement under FAR Part 12, requiring that all components be newly manufactured spares; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the items must meet all government form, fit, and function requirements. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, a standard commercial warranty, and full supply chain traceability. IUID is not required for these items as they are captured under the parent end item in the DoD registry.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--FIRE CONTROL PANEL

Solicitation # SPRPA126QUC04

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of two aircraft fire control panels under NSN 7R-1680-016679280-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition is governed by FAR Part 12 and applicable DFARS regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the commerciality of the items, including technical specifications and sales history, and ensure the components meet all form, fit, and function requirements. A standard commercial warranty covering workmanship and replacement parts is required.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

66--TRANSDUCER,MOTIONAL

Solicitation # SPRPA126QUB95

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new motional transducers under contract NSN 7R-6695-015731832-P8. The items are classified as commercial products and must be newly manufactured; refurbished or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and the acquisition follows FAR Part 12 and DFARS 212 regulations. Eligible offerors must be government-approved sources of supply or provide an authorized distributor letter on the source's letterhead. A critical requirement for award is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must also provide documentation supporting the item's commerciality, a standard commercial warranty, and technical specifications ensuring the components meet the required form, fit, and function.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

16--TAXI,NOSE GEAR,AIR

Solicitation # SPRPA126QUC02

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of two new nose gear taxi aircraft components under NSN 7R-1680-015885785-P8. The acquisition is conducted as a commercial item procurement in accordance with FAR Part 12 and DFARS 212, requiring that all provided components be newly manufactured spares. Refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. Suppliers must be government-approved sources of supply and provide an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and conformity to design data. Offerors are required to submit documentation supporting the commerciality of the items, such as sales history or price lists, and must provide full traceability from the original manufacturer. Delivery is specified as FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

48--VALVE,CROSS

Solicitation # SPRPA126QUC03

This solicitation, issued by the DLA Aviation office in Philadelphia, is for the procurement of nine aircraft cross valves under NSN 7R-4810-016016223-P8. The items are classified as commercial products and must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited. Delivery is set as FOB Origin, and all components must meet the government's form, fit, and function requirements. A critical requirement for this contract is the provision of an FAA Form 8130-3 Authorized Release Certificate to ensure airworthiness and traceability from the original manufacturer. Offerors must provide documentation supporting the commerciality of the items and must be government-approved sources of supply or provide an authorized distributor letter. The acquisition is conducted under FAR Part 12 and EAF Authority, requiring a standard commercial warranty and adherence to specific packaging and labeling standards.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC35

This solicitation, issued by DLA Aviation at Philadelphia, seeks the procurement of an aluminum outer shell container and an Inner Frame Adapter Assembly for the T-56 QECA engine. The contract is extended to October 13, 2026, to promote competition and is designated as a total small business set-aside. Manufacturing must adhere to specific Container Research Corporation drawings and AWS welding standards, with a strict requirement for engineering source approval for new manufacturers. Key technical specifications include the use of electrodeposited alkaline Zinc-Nickel Alloy finishing and the installation of specific desiccant and shock mounts. Quality assurance is a critical component of this contract, requiring 100% production leak testing and a rigorous First Article Testing (FAT) process. The FAT includes dimensional inspections, an 18-inch free-fall drop test, and form and fit verification. Contractors must provide a first article sample within 160 calendar days of the contract date to designated facilities in New Jersey. All items must feature Unique Identification (UID) markings and comply with Buy American and Free Trade Agreement certifications.

Other Metal Container Manufacturing

POSTED

DEADLINE

in about 1 month

16--CABIN TEMPERATURE I

Solicitation # SPRPA126QUB92

This solicitation, identified by NSN 7R-1680-016010190-P8 and reference number 162BL902, is for the procurement of one aircraft component determined to be a commercial item. The acquisition is governed by FAR Part 12 and DFARS 212, requiring that the component be currently in production or previously offered in the commercial marketplace. All submitted items must be newly manufactured spares; refurbished, remanufactured, or repaired materials are strictly prohibited and will be deemed ineligible for award. To be considered technically acceptable, offerors must be government-approved sources of supply or provide an authorized distributor letter. A critical requirement is the provision of an FAA Form 8130-3 Authorized Release Certificate to certify airworthiness and traceability from the original manufacturer. Vendors must provide documentation supporting the item's commerciality, such as price lists or sales history, and ensure the component meets all form, fit, and function requirements. Delivery is FOB Origin, and the contract requires a standard commercial warranty covering workmanship and replacement parts.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

NRP,FWD FAIRING ASS

Solicitation # SPRPA126QUB93

This solicitation, issued by the Department of Defense via the DLA Aviation office in Philadelphia, is for the procurement of NRP FWD Fairing Assemblies. The contract requires that all parts be newly manufactured, as refurbished, remanufactured, or repaired materials are strictly prohibited. Suppliers must be government-approved sources and provide FAA-certified parts accompanied by an FAA Form 8130-3 Airworthy Approval Tag. Distributors must submit an authorized distributor letter on the source's letterhead to be considered technically acceptable. The agreement mandates compliance with AS/EN/JISQ 9100 quality standards and includes a 12-month warranty for supplies of a noncomplex nature. Payments are to be processed through the Wide Area Workflow system using combined invoice and receiving reports. While IUID is generally required, it is waived for these commercial items per the PMA-290 implementation plan. The solicitation is issued under EAF authority, and responses are due by October 13, 2026.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

81--NRP,SHIPPING AND ST

Solicitation # SPRPA126RVC02

This solicitation is for the manufacture of plastic containers produced via rotomolding, specifically following drawing 829E001. The contract includes strict quality assurance requirements, including a First Article Test (FAT) involving dimensional inspections, 18-inch free fall drop tests, and pneumatic leak testing. All production units must undergo 100% leak testing and be affixed with a Unique Identification (UID) marking on a nameplate. The contractor is responsible for all tooling, fixtures, and the cost of FAT shipment and repair. Key technical specifications require the use of a specific amount of desiccant per cubic foot and the substitution of alkaline Zinc-Nickel Alloy plating for cadmium. The contract is a total small business set-aside and includes various federal clauses regarding the Buy American Act and the Trade Agreements Act. The current amendment extends the solicitation period to September 23, 2026, to promote competition. New manufacturers must obtain engineering source approval from the design activity and may be subject to pre-award surveys and post-award conferences.

Other Metal Container Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS