This Solicitation opportunity from Department Of Defense was posted on September 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ELECTRODE, CUTTING, SOLI

Closed

SPE8E6-26-T-4623Federal

Submission Closed10/01/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333992

New

Federal

Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services

Solicitation # W91CRB-27-R-A005

The Army Contracting Command-Aberdeen Proving Ground is soliciting a single-award, hybrid Time-and-Materials and Firm-Fixed-Price Indefinite Delivery/Indefinite Quantity contract for on-site welding, machining, painting, and fabrication services. This 100 percent small business set-aside under NAICS 333992 will support the U.S. Army Aberdeen Test Center across multiple cores, including Automotive, Command Staff, Live Fire, Virtual Test and Electronics, and Warfighter. The period of performance runs from December 9, 2026, through December 8, 2031, and includes a 45-day transition period. The government has provided a five million dollar firm-fixed-price plug for standard fabrication tasks over the five-year term. Source selection will follow the Lowest Price Technically Acceptable process, evaluating technical capability, past performance from the last five years, and price. Proposals must be submitted in four volumes, with strict page limits for the technical and past performance sections. Key requirements include that all personnel must possess an active Secret security clearance and meet specific certification and licensing standards. The contractor is responsible for adhering to MIL-STD-130 and MIL-STD-129 for item identification and marking. Performance will be managed via a Quality Assurance Surveillance Plan, and all invoicing must be processed through the Wide Area WorkFlow system.

POSTED

DEADLINE

WELDING QUALIFICATION

Solicitation # SPE8E5-27-T-0416

This solicitation, issued by the Defense Logistics Agency Troop Support Construction and Equipment office, is for the procurement of 165 units of welding qualification test kits under NSN 3439-01-679-4815. The requirement is designated as a total small business set-aside and may be eligible for automated award, with a HUBZone price evaluation preference available. The required delivery date is April 10, 2027, with a lead time of 163 days after the delivery order. Shipping is established as FOB Destination Other, with the primary delivery location being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements and specifies that all packaging and marking must comply with MIL-STD-129 and RP001. Hazardous materials must be handled according to FED-STD-313 and the Hazard Communication Standard, with required safety data sheets submitted prior to award. Inspection and acceptance will occur at the destination per FAR 52.246-2. Additionally, the contractor must comply with the Buy American and Balance of Payments Program, ITAR or EAR export controls, and cybersecurity standards including DFARS 252.204-7012 and CMMC Level 2. Invoicing and payment processing must be conducted electronically through the Wide Area WorkFlow system.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Draft Solicitation - Aberdeen Test Center Welding, Machining, Painting, and Fabrication Services

Solicitation # W91CRB-27-R-A002

The U.S. Army Aberdeen Test Center (ATC) is seeking a contractor to provide on-site, non-personal technical support services for welding, machining, painting, and fabrication at Aberdeen Proving Ground, Maryland. This total small business set-aside, specifically targeting Women-Owned Small Businesses and Service-Disabled Veteran-Owned Small Businesses under NAICS 333992, supports core competencies including Automotive, Live Fire, and Warfighter. The overall period of performance runs from December 9, 2026, through December 8, 2031, featuring a 45-day phase-in period and a 57-month time and materials ordering period with additional firm-fixed-price tasks. The contract will be awarded based on the Lowest Price Technically Acceptable (LPTA) process, evaluating technical approach, past performance, and price. Key requirements include the provision of a Program Manager and specialized working leaders, with all personnel requiring an active Secret security clearance. The contractor must implement a Quality Control Plan and adhere to a Government Quality Assurance Surveillance Plan. Significant emphasis is placed on the management of Government Furnished Property (GFP) and Contractor Acquired Property (CAP), requiring annual reporting and a compliant property management system. Deliverables include monthly progress reports, cost reports, and strict adherence to DoD unique item identification and marking standards.

POSTED

DEADLINE

Industrial Resistance Spot Welder Equipment SupplierThis subcontract opportunity, managed by the Department of Transportation's AAQ600 692M15 Acquisition and Grants office, seeks an OEM authorized distributor to supply one industrial resistance spot welder for prime contractors at the William J. Hughes Technical Center in Atlantic City. The required equipment must be fully operational, include manuals, a two-stage foot switch, and a basic consumables kit. Technical specifications mandate compatibility with 480VAC/3ph/60 Hz power and a minimum throat depth of 24 inches, ensuring the machine meets AWS D17.2 standards. The solicitation was posted on October 30, 2026, with a response deadline of November 20, 2026. Falling under NAICS code 333992, the contract focuses on the procurement of specialized industrial machinery to support FAA projects. Interested parties must ensure they meet the authorized distributor requirement to be eligible for the award.

AAQ600 692M15 Acquisition & Grants

POSTED

DEADLINE

Industrial Resistance Spot Welder

Solicitation # 692M15-27-P

The Federal Aviation Administration, specifically the William J. Hughes Technical Center for Advanced Aerospace, is conducting a market survey under solicitation number 692M15-27-P to identify capable vendors for the manufacture of one new industrial resistance spot welder. This equipment is intended to support specialized enclosures and testing equipment and must be supplied by an OEM authorized distributor. Key technical requirements include AWS D17.2 compliance, operation on 480VAC/3ph/60 Hz utility power, and the inclusion of a two-stage foot switch to prevent pinch-point injuries. The procurement also requires one day of on-site training for metal shop employees and a minimum one-year standard commercial warranty starting upon final government acceptance. The delivery must be completed within 180 days of award on a strictly FOB Destination basis, with all shipping and handling costs included in the total price. Payment terms are Net 30 following full delivery and formal acceptance, with no advance or milestone payments permitted. Interested respondents must be registered in the System for Award Management and provide their UEI number and size status under NAICS code 333992. Submissions must not exceed five pages and are due to Contracting Officer Kenneth Hitchens by November 20, 2026. This announcement is for market research purposes only and does not constitute a formal request for proposal or a commitment to contract.

AAQ600 692M15 Acquisition & Grants

POSTED

DEADLINE

Welding Qualification Test Kit SupplyThis subcontract, issued by the Department of Defense DDSP New Cumberland Facility, requires the manufacture and delivery of 137 Welding Qualification Test Kits under NSN 3439016797021. The kits must be produced in strict accordance with Basic Drawing NR 98752 8027662, Revision B, and must adhere to all DLA technical and quality requirements, including the use of materials that meet the specified drawing standards. The contract is designated as a Total Small Business Set-Aside under NAICS code 333992, with performance taking place in New Cumberland. Delivery of the completed kits is required FOB Origin. Interested parties must respond by the deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

WELDING QUALIFICATION

Solicitation # SPE8E6-27-T-0480

Solicitation SPE8E6-27-T-0480 is a request for the procurement of 352 Welding Qualification Test Kits (NSN 3439-01-682-4453) for the Department of Defense, specifically the DDSP New Cumberland Facility. The requirement is governed by basic drawing 98752 8027655 (Revision B) and reference drawing 98752 200415485 (Revision E). Delivery is expected by June 7, 2027, with a need ship date of April 26, 2027, under FOB Origin terms. The procurement is designated as a total small business set-aside under FAR 19.5, and the award may be processed via an automated system. The contract imposes strict technical and quality standards, incorporating the DLA Master List of Technical and Quality Requirements, including RP001 for packaging and RQ011 for the removal of government identification. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls under DFARS 252.225-7048, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contractor must comply with the Buy American Act and the Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area WorkFlow (WAWF) system. Inspection will occur at the destination per FAR 52.246-2. Quotations are due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

WELDING QUALIFICATION

Solicitation # SPE8E5-27-T-0397

Solicitation SPE8E5-27-T-0397 is a total small business set-aside fixed-price contract issued by the Defense Logistics Agency DLA Dist San Joaquin for the procurement of 140 welding qualification test kits, identified by NSN 3439-01-679-7500. The items must be manufactured according to TDP Rev A Gen 1 and Reference Drawing NR 98752 200415485, Revision E. Delivery is required within 167 days after order, with an original required delivery date of April 23, 2027. The place of performance and delivery is Tracy, California, with inspection and acceptance occurring at the destination. The contract imposes strict technical and security requirements, including compliance with ITAR and EAR export controls, which limit technical data distribution to approved US/Canada Joint Certification Program participants. Packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following RP001 and commercial packaging meeting ASTM D3951 unless DLA Master List requirements take precedence. Hazardous materials must be handled per FED-STD-313 and TQ requirement IP025. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and adherence to DFARS 252.204-7012 for safeguarding covered defense information.

POSTED

DEADLINE

Solicitation # SPE7M2-27-T-0580

Solicitation SPE7M2-27-T-0580 is a small business set-aside request for quotations issued by the DLA Weapons Support Nuclear Reactor Program for the procurement of 2,747 units of a soldering aid. The item is a commercial off the shelf non conductive fiberglass tool, 1/4 inch in diameter or square and 6 inches in length, featuring one pointed end and one notched slot. It is designated as a critical application item used for inspecting, probing, unsoldering, and assembling printed circuits. The product must be delivered in new, unused unit containers and must strictly adhere to mercury free requirements as specified in drawing 13873-03-0001, as well as prohibitions against class I ozone depleting chemicals. The delivery schedule specifies a 167 day after order period, with a need ship date of April 26, 2027, and a final required delivery date of June 4, 2027. Shipping is FOB destination to the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging and marking must comply with MIL-STD-129 and MIL-STD-2073-1E, with palletization following DLA requirement RP001. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various federal and defense clauses, including the Buy American Act, safeguarding of covered defense information, and restrictions on the use of mandatory arbitration agreements.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Solicitation # SPE8E5-27-T-0391

Solicitation SPE8E5-27-T-0391 is a fixed-price procurement issued by the Defense Logistics Agency for the supply of welding electrodes, identified by NSN 3439-01-180-4976. The requirement specifies 32 units of 16lb electrodes with a 0.035 inch diameter, specifically identifying Hobart Brothers part number 535603512ML as the exact product. These items are designated as critical application items and must comply with AWS A5.10/A5.10M-17 standards. Delivery is required at the DDSP New Cumberland Facility in Pennsylvania, with an original required delivery date of March 29, 2027, and a need ship date of April 26, 2027. The contract mandates strict adherence to packaging and marking standards, including ASTM-D3951-15 for general packaging, MIL-STD-129 for markings, and MIL-STD-130N for identification of U.S. military property. Inspection and acceptance will occur at the destination. Key regulatory requirements include the Buy American Act, the Berry Amendment, and various DFARS clauses regarding cybersecurity, such as safeguarding covered defense information and reporting cyber incidents. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Evaluation for award may include a price preference for HUBZone Small Business Concerns and may be subject to an automated award process.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

WELDING QUALIFICATION

Solicitation # SPE8E6-27-T-0482

Solicitation SPE8E6-27-T-0482 is a federal procurement issued by the DLA Troop Support Construction and Equipment (Class IV) for the supply of 528 Welding Qualification Test Kits (NSN 3439-01-679-7026). The contract requires adherence to specific technical drawings, including Basic Drawing 98752 8027658 Revision C and Reference Drawing 98752 200415485 Revision E. Delivery is required within 167 days after receipt of order, with a target delivery date of April 25, 2027, to the DLA Distribution center in Jacksonville, Florida. Inspection and acceptance will occur at the destination per FAR 52.246-1. The procurement is subject to stringent regulatory and security requirements, including the Buy American Act, the Berry Amendment, and ITAR/EAR export controls for technical data. Contractors must comply with CMMC Level 2 certification and DFARS 252.204-7012 for safeguarding covered defense information. Packaging must meet ASTM D3951 and MIL-STD-129 standards, with specific labeling requirements for hazardous materials per 29 CFR 1910.1200. Invoicing is managed electronically through the Wide Area WorkFlow (WAWF) system. While the solicitation is listed as a total small business set-aside in some metadata, the contract documents explicitly state it is not a small business set-aside. All quotations must be submitted via the DIBBS portal by November 9, 2026.

POSTED

DEADLINE

WELDING QUALIFICATION

Solicitation # SPE8E6-27-T-0484

Solicitation SPE8E6-27-T-0484 is a fixed-price request for the procurement of 239 welding qualification test kits (NSN 3439-01-679-7035) for the Department of Defense, specifically the DDSP New Cumberland Facility. The contract requires delivery within 167 days after award, with shipping terms set as FOB Origin and both inspection and acceptance occurring at the destination. While the solicitation is not a small business set-aside, it allows for the HUBZone price evaluation preference. All quotations must be submitted via the DLA Internet Bid Board System (DIBBS) by November 9, 2026. The contract imposes strict technical and safety requirements, including compliance with the DLA Master List of Technical and Quality Requirements and MIL-STD-129 for marking and labeling. Suppliers must adhere to the Hazard Communication Standard for hazardous materials, providing Safety Data Sheets and ensuring no intentional addition of mercury. Due to the nature of the technical data, offerors must possess an approved US/Canada Joint Certification Program (JCP) certification and be approved by the DLA controlling authority to access export-controlled data. Additionally, the contract mandates adherence to cybersecurity standards, including CMMC Level 2 and NIST SP 800-171 requirements. Payment and invoicing are to be processed electronically through the Wide Area WorkFlow (WAWF) system.

DDSP NEW CUMBERLAND FACILITY

POSTED

5 days ago

DEADLINE

in 6 days

AI Contract Overview

Solicitation SPE8E6-26-T-4623 is a Request for Quotations issued by DLA Troop Support Construction and Equipment for the procurement of 107 packages of solid cutting electrodes. The required items are round copper-coated carbon-graphite electrodes measuring 1/2 inch in diameter and 12 inches in length, conforming to part number MIL-E-17777 MIL-CUC-A 0.500 12IN. This is a fully competitive acquisition under NAICS 333992, with a required delivery date of February 19, 2027, and a need ship date of March 15, 2027. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to technical and quality requirements, including packaging per ASTM-D3951-15, marking per MIL-STD-129, and palletization per MIL-STD-147. Because the materials may be hazardous, suppliers must provide Safety Data Sheets and labels compliant with 29 C.F.R. 1910.1200. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, while certified HUBZone small businesses may be eligible for a price evaluation preference.

General Info

DLA seeks 107 packages of carbon-graphite cutting electrodes by February 19, 2027.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITY

NAICS

333992 - Welding and Soldering Equipment Manufacturing

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

20 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedSep 16

Solicitation

Deadline changedSep 28

Response deadline changed from Sep 28, 2026 to Oct 1, 2026.

Response DeadlineOct 1

Deadline has passed

Submission Closed

10/01/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY

Office AddressUSA

Contacts

Brett Scull

contact@example.gov

+1 (555) 000-0000

Full Description

ELECTRODE,CUTTING,SOLID
ELECTRODE, CUTTING, SOLID
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN
ACCORDANCE WITH A MILITARY / FEDERAL
SPECIFICATION/STANDARD. SEE NSN/Part Number: 3439-00-288-4049 Quantity: 107 PG Purchase Request: 7018364670QTY: 107 Delivery: 167 days ADO