Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

ELECTRODE

Active
SPMYM226Q7762Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, numbered SPMYM26Q7762, is posted on SAM.gov and seeks quotes for electrodes under a Total Small Business Set-Aside. All submissions must be made electronically through SAM.gov and are due by 12 PM PST on July 28, 2026. The contract requires compliance with NIST SP 800-171 for any contractor not supplying Commercial Off The Shelf items, necessitating a current cybersecurity assessment within the last three years unless otherwise specified; COTS items must be clearly identified and documented during bidding. Quotes must be submitted FOB Destination Bremerton, WA, and include full contractor details, CAGE code, point of contact information, part numbers, manufacturer names, country of origin, lead times, and delivery dates. Specific sections of the solicitation must be completed and signed, including telecommunications compliance questions and manufacturer certifications. The completed and signed solicitation, along with the quote, must be emailed to Deborah.Beierle@dla.mil to be considered responsive. The performance location is in Bremerton, Washington, and the NAICS code is 333992, under the Department of Defense’s DLA Maritime - Puget Sound office.

General Info

Small business set-aside for electrodes, due July 28, 2026, FOB Bremerton, WA, cybersecurity compliance required.

Agency

Department Of Defense → DLA Maritime - Puget SoundView Agency

NAICS

333992 - Welding and Soldering Equipment ManufacturingView NAICS

Place of Performance

Bremerton, WA, 98314, USA

Set-Aside

SBA

Documents

(5)

CDRL+EXHIBIT+A++N4523A61109800.pdf

PDF

Solicitation+-+SPMYM226Q7762.pdf

PDF

SDS+P151391.pdf

PDF

CDRL+EXHIBIT+B++N4523A61109800.pdf

PDF

TECHNICAL+ORDERING+DATA+61109800.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / Agency
Department Of Defense → DLA Maritime - Puget Sound
View Agency Profile
Office AddressBREMERTON, WA, 98314-5000, USA
Contacts
Deborah Beierle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more

THIS SOLICITATION AND ANY SUBSEQUENT AMENDMENTS WILL BE POSTED TO THE SAM WEBSITE: SAM.GOV


ELECTRONIC SUBMISSION OF QUOTES IS AVAILABLE THROUGH THE SAM WEBSITE.


To be considered for award, if the contractor (awardee) is required to implement NIST SP 800-171, the contractor (awardee) shall have a current assessment as detailed in DFARS 252.204-7019 (I.E., not more than 3 years old unless a lesser time is specified in the solicitation)



**Items deemed to be Commercial Off The Shelf (COTS) are exempt from NIST SP 800-171 requirement.  Must identify and provide information to contracting officer on bid during solicitation period**



  Please read the contract in its entirety.



  If you are able to provide a quote be sure to provide the following information in the sections provided below:



  1. Page 1 -  Read box 28 and sign boxes 30 a, b, and c.
  2. Provide Contractor's info and cage code.
  3. Page 2-Section A. A1 – 1. Enter The Contractor's POC
  4. Section B. – Attach or Enter your Quote and any other info we should know.
  5. Please quote FOB Destination BREMERTON, WA.
  6. Section F. –  Provide the Part number, Lead Time and/or Delivery Date.
  7. PN:_______________MFG:                              COO:                   ;
  8. Page 49- Section K. K21 – Check the appropriate box and provide the Manufacturer’s Name and the Country of Manufacturing
  9. Page 31-32, 46-47 Section K. - 52.204-24 (d)(1) and (2) Telecomunications questions. Check the applicable boxes.
  10. Return the signed and filled out solicitation with your quote by 7-28-2026 by 12 PM PST


FOR YOUR BID TO BE DEEMED RESPONSIVE A SIGNED AND COMPLETED SOLICITATION MUST BE SUBMITTED VIA EMAIL.



EMAIL:  Deborah.Beierle@dla.mil


Similar Contracts

Same NAICS industry code

NAICS: 333992
New
Federal
ELECTRODE,WELDINGThis contract, issued under solicitation number N0010426QFG29 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, seeks welding electrodes classified as Special Emphasis Level I material for use in critical shipboard systems where failure could result in catastrophic loss of life or vessel integrity. The items must strictly conform to specification T9074-BC-GIB-010/0200 and associated appendixes, including specific requirements for chemical composition, mechanical properties, and welding parameters, with chromium content limited to 0.20% to control hexavalent chromium fumes. All materials must be traceable from heat lot to final delivery via unique identifiers on container labels, and certification data must be submitted via WAWF to Portsmouth Naval Shipyard prior to shipment, with no material allowed to ship without formal acceptance. Contractors must maintain an ISO-9001 or equivalent quality system, comply with strict documentation standards, and provide signed, unqualified certifications affirming full compliance with all contractual and specification requirements. The contract mandates 100% inspection of traceability markings and certification documents, prohibits transcribed or disclaimered data, and requires strict control over subcontractors and supply chain integrity. Delivery is scheduled over 365 days with early or incremental shipments permitted at no added cost, and variations in quantity are limited to a maximum of -5% under specific conditions. All materials must be mercury-free, packaged in accordance with MIL-STD-2073, and shipped in 10-pound containers with proper labeling. Compliance with Buy American and small business subcontracting provisions is required, and waivers or deviations must be formally requested and approved through the ECDS system. The contracting officer retains authority to conduct government quality assurance at source, and all certifications, engineering change proposals, and documentation must be electronically submitted using ECDS or WAWF. The procurement is issued under emergency acquisition flexibility, and only qualified products listed on the approved QPL are acceptable, with no exceptions for unapproved sources.
Navsup Weapon Systems Support Mech

POSTED

3 days ago

DEADLINE

in 14 days
View Details
NAICS: 333992
New
DIBBS
Small Business Prime Contractor (Set-Aside Opportunity)The contract is a Total Small Business Set-Aside under FAR 19.5, exclusively available to small businesses, for the management and fulfillment of delivery of a Welding Qualification Test Kit. The NAICS code 333992 identifies the industry as Other Manufacturing, indicating the specialized nature of the product required. Performance of the contract must occur at the New Cumberland facility with a ZIP code of 17070-5002, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. The solicitation was posted on July 23, 2026, with a firm deadline for responses on August 3, 2026. Although classified as a subcontract in type, the opportunity is structured as a prime contract award, meaning the selected small business will serve as the prime contractor responsible for end-to-end delivery without requiring subcontracting to another entity. All responsibilities, including compliance with federal acquisition regulations pertaining to small business set-asides and timely fulfillment of technical requirements, rest fully with the winning small business entity.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 333992
New
DIBBS
CONNECTOR, RECEPTACLThis contract specifies the procurement of an electrical connector receptacle under the NSN 5935-01-225-6820 and part number M28840/14AA1S1, aligned with MIL-DTL-28840/14G and MIL-DTL-28840 specifications. The item is classified as a qualified product requiring compliance with the Qualified Products List for Federal Stock Class 5935 connector assemblies and contacts, as outlined in procurement note H01. The product is designated as a critical application item and must adhere to rigorous technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Strict prohibitions forbid the intentional addition of mercury or mercury-containing compounds, except in specific exempted applications such as batteries, fluorescent lamps, and medical instruments, with additional containment and shock-proofing requirements for portable mercury-containing devices. The use of Class I ozone-depleting substances in any phase of design, manufacturing, or testing is strictly prohibited without explicit contracting officer approval, though exceptions apply to commercial items and numbered parts. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item must be delivered FOB origin in 91 days, with zero variance in quantity, inspected and accepted at destination. Each unit is priced at $28.00, totaling $784 for 28 units, and must be shipped to the DLA Distribution facility in New Cumberland, PA, following DLAD Proc Notes C19 and C20 for transportation and first destination handling. The original required delivery date is June 27, 2026, with a need ship date of November 3, 2026, under solicitation SPE7M5-26-T-351P, issued by the Department of Defense’s Active Devices Division.
ACTIVE DEVICES DIVISION

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 333992
New
DIBBS
TRANSFORMER, POWERThe contract pertains to the procurement of a power transformer, specifically identifiable by part number 397849-07403 and NSN 5950009576725, designated as a critical application item supplied by SIMMONDS PRECISION PRODUCTS INC. The requirement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951, and compliance with MIL-STD-129 for labeling and packaging. The item must be packaged in accordance with Fed-Std-313, using IP025 for hazardous materials or commercial packaging otherwise, and palletized per DLA Packaging Requirements. The transformer is subject to zero defect acceptance under MIL-STD-1916 or an equivalent zero-based sampling plan, with all attributes treated as major unless otherwise specified, and inspection and acceptance occur at the destination. Cybersecurity requirements include a CMMC Level 2 Self-Assessment and adherence to rules for covered defense information. Delivery is FOB origin within five days of contract award to the Marine Aviation Logistics Squadron 16 in San Diego, with shipment required via the fastest traceable means excluding parcel post. The contract specifies a fixed quantity of one unit, with no variance allowed, and an original delivery date of July 23, 2026, under solicitation SPE4A5-26-T-308A. The unit of issue is each, and all packaging must reflect the prescribed QUP and DLA-recognized labeling. Additional compliance obligations include physical identification of the item, proper use of measuring and test equipment, and removal of government identification from non-accepted supplies.
ASC SUPPLIER OPER OEM DIVISION

POSTED

4 days ago

DEADLINE

in 4 days
View Details
NAICS: 333992
New
DIBBS
WELDING QUALIFICATIONThe contract pertains to the procurement of a Welding Qualification Test Kit under solicitation SPE8E5-26-T-3684, with a total quantity of 122 units, each identified by NSN 3439-01-679-7021 and part number 8027662-70. The requirement is designated as a Total Small Business Set-Aside, targeting small businesses under NAICS code 333992, and is managed by the Department of Defense through the DDSP New Cumberland Facility. Delivery is required within 167 days after order placement, with the solicitation opening on July 23, 2026, and responses due by August 3, 2026. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements referenced in RA001, with packaging governed by RP001 and export control compliance mandated under RQ032 due to the presence of technical data subject to ITAR or EAR regulations. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and formal DLA authorization. The contract also mandates removal of government identification from non-accepted supplies and applies Covered Defense Information protocols as outlined in RD002. The point of contact for inquiries is Brandon Wicker, reachable via email and phone provided in the contract data.
DDSP NEW CUMBERLAND FACILITY

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 333992
New
Federal
Anchor Windlass Removal and Reinstallation (On-Vessel Mechanical Services)The contract involves the on-site removal and reinstallation of the anchor windlass on USCGC MORRO BAY, located in Cleveland, OH. This work encompasses the complete disconnection and reconnection of all mechanical, electrical, and structural components associated with the windlass system, requiring skilled technical expertise to ensure safe and compliant vessel operations post-reinstallation. All work must be performed aboard the vessel at the designated location without relocation of the asset to an external facility. This is a subcontract issued under a Total Small Business Set-Aside by the Department of Homeland Security, specifically through the Sflc Procurement Branch 2, with the NAICS code 333992 indicating classification under Other Miscellaneous Manufacturing. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, at 2:00 PM. Performance is restricted to the specified place of performance in Cleveland, and the project is intended exclusively for small business contractors meeting SBA criteria.
Sflc Procurement Branch 2(00085)

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 333992
New
Federal
Cryostat and Vacuum Enclosure SupplyThe contract calls for the supply of a cryostat and vacuum enclosure system designed to maintain a detector at cryogenic temperatures, ensuring optimal operational conditions for sensitive scientific measurements. The system must be fully integrated with the detector and associated signal processing electronics, requiring precise engineering to guarantee thermal stability, vacuum integrity, and seamless electronic compatibility. The performance location is designated as Winchester, Massachusetts, with a ZIP code of 01890, indicating the physical site where the equipment will be installed and tested. This subcontract, classified under NAICS code 333992 for other commercial and industrial machinery and equipment manufacturing, is issued by the FDA Office of Acquisition and Grant Services under the Department of Health and Human Services. The opportunity was posted on July 23, 2026, with a response deadline set for August 7, 2026, at 5:00 PM Eastern Time. While specific details about set-aside status or point of contact are not provided, the requirement implies a high degree of technical expertise and compliance with cryogenic and vacuum system standards to support mission-critical detection functions.
FDA Office Of Acq Grant Svcs

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 333992
New
Federal
Recirculating Aquaculture System (RAS) – Trout Incubation ModuleThe contract entails the supply and delivery of a fully self-contained recirculating aquaculture system designed for trout incubation, featuring two racks each equipped with twelve 18-inch incubators, totaling twenty-four incubation units. The system must meet strict technical specifications and adhere to government marking standards to ensure compliance with federal procurement requirements. The equipment is intended for use at a designated performance location in Trail, Oregon, with a zip code of 97541, and must be capable of supporting sustained, controlled aquatic environments for trout hatchery operations. This is a small business set-aside subcontract under the SBA program, specifically reserved for total small business participation as defined by FAR 19.5, with a NAICS code of 333992 for other commercial and industrial machinery and equipment manufacturing. The opportunity was posted on July 23, 2026, and responses are due by August 6, 2026, by 5:00 PM. The contracting entity operates under the Department of Defense through the W071 Endist Portland office, indicating defense-related aquaculture needs, potentially supporting military nutrition or research initiatives. All deliverables must be completed and delivered in accordance with the stated deadlines and regulatory frameworks governing federal subcontracting.
W071 Endist Portland

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
Federal
Recirculating Aquaculture System (RAS) – Salmon Incubation ModuleThe contract entails the supply and delivery of a fully self-contained recirculating aquaculture system designed specifically for salmon incubation, featuring four racks with eight-tray incubators totaling 32 trays. The system must meet stringent technical specifications and adhere to all applicable government standards to ensure optimal water quality, temperature control, and biological filtration necessary for successful salmon egg development and early-stage fry rearing. The equipment is intended for use at a designated performance location in Trail, Oregon, with postal code 97541, and must be installed and operational in compliance with regulatory and operational requirements specific to federal aquaculture operations. This subcontract is a Total Small Business Set-Aside under the SBA program, meaning only small business concerns are eligible to bid, and it is classified under NAICS code 333992 for Other Commercial and Service Industry Machinery Manufacturing. The solicitation was posted on July 23, 2026, with a firm response deadline of August 6, 2026, at 5:00 PM local time. The contracting activity is managed by the Department of Defense through the W071 Endist Portland office, indicating this system supports a military or defense-related aquaculture initiative. All proposals must demonstrate technical capability, compliance with standards, and the ability to deliver within the specified timeline without delays.
W071 Endist Portland

POSTED

4 days ago

DEADLINE

in 10 days
View Details
NAICS: 333992
New
Federal
Precision Die Bonder System Supply and IntegrationThe contract calls for the supply, installation, and commissioning of a high-accuracy die bonder specifically designed for advanced semiconductor packaging applications, requiring placement precision of five micrometers or better and integrated automated epoxy dispensing capabilities. This equipment must meet stringent performance benchmarks to support critical military and defense-grade semiconductor manufacturing processes. The work is to be performed at a facility with a zip code of 20375, which corresponds to the Naval Research Laboratory in Washington D.C., underscoring the defense-oriented nature of the project. The contract is structured as a subcontract under the Department of Defense and falls under NAICS code 333992, which covers other industrial machinery manufacturing. Proposals are due by August 7, 2026, with the opportunity posted on July 23, 2026, allowing potential vendors a three-week window to submit responses. The contracting activity is managed by the Naval Research Laboratory, and the system must be fully functional upon commissioning, including validation of accuracy, reliability, and integration with existing production workflows.
Naval Research Laboratory

POSTED

4 days ago

DEADLINE

in 11 days
View Details
NAICS: 333992
New
Federal
Granular Activated Carbon (GAC) Filtration System ServiceThe contract pertains to the maintenance, media replacement, and performance testing of granular activated carbon filtration systems utilized for water or air purification at CFA Yokosuka, with services required to ensure continued operational effectiveness and regulatory compliance. The work involves routine inspections, timely replacement of degraded GAC media, and comprehensive testing to validate system performance under specified conditions, all critical to sustaining the quality of purified water and air at the facility. The contract is structured as a subcontract under NAICS code 333992, which classifies it within the industrial machinery and equipment manufacturing sector, and is managed by the Naval Facilities Engineering Systems Command Far East under the Department of Defense. The solicitation was posted on July 23, 2026, with a required response deadline of September 3, 2026, indicating a competitive procurement timeline for qualified subcontractors. The place of performance is fixed at CFA Yokosuka, and while specific address details are not provided, the work is localized to this facility in Japan. There is no set-aside classification indicated, suggesting eligibility is open to all qualified firms regardless of size or certification status. The contract does not include a designated point of contact, implying all inquiries must be directed through official SAM.gov channels, with the official link provided for further information and submission.
Navfacsyscom Far East

POSTED

4 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333992
New
Federal
ROD,WELDINGThis contract seeks the procurement of E7018-B2L welding electrodes, classified as SPECIAL EMPHASIS Level I material due to their critical role in a shipboard system where failure could result in catastrophic consequences including loss of life or vessel. The material must strictly comply with AWS A5.5 and AWS A5.01 specifications, with mandatory chemical and mechanical testing per Table 5, including moisture content requirements aligned with MIL-E-22200/8, which contains specific corrections to be followed. Electrodes must be supplied in 10-pound containers with traceable labeling, including the type designation on the electrode covering within 2.5 inches of the grip end, and each unit container must carry a unique traceability identifier linked to certification data. Certification reports must be signed, unqualified, and directly traceable to material lots, with no disclaimers permitted; noncompliant or incomplete documentation will result in rejection. All suppliers must maintain an ISO-9001 quality system with calibration standards per ISO-10012 or ANSI-Z540.3 and ISO-17025, subject to government audit prior to and throughout production. The prime contractor is responsible for ensuring subcontractors adhere to all quality, traceability, and certification requirements and must conduct supplier evaluations and periodic audits. Final inspection requires 100% verification of traceability markings and certification documentation, with materials shipped only after WAWF submission and formal acceptance by Portsmouth Naval Shipyard. Deliveries are due within 365 days, with early or incremental shipments permitted without cost to the government, and no quantity variations beyond -5% are allowed unless caused by packing or shipping conditions. The procurement is issued under Emergency Acquisition Flexibilities, and all data must be submitted through the ECDS system with WAWF used for certification transmittal specifying N50286 as ship-to, N39040 as inspect/accept, and PORT_PTNH_WAWF_NOTIFICATION@NAVY.MIL for email notifications. Mercury is strictly prohibited, and all documentation must conform to Navy distribution control and security requirements, with waivers or deviations requiring written approval prior to implementation.
Navsup Weapon Systems Support Mech

POSTED

4 days ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 334220
New
Federal
HANDHELD RADIOThis solicitation for handheld radios, numbered SPMYM226Q7823, is a total small business set-aside under NAICS code 334220, issued by the Department of Defense’s DLA Maritime – Puget Sound office in Bremerton, Washington. All responses must be submitted electronically via email to diana.baldwin@dla.mil by the deadline of July 28, 2026, at 8:00 PM ET, and only fully completed and signed solicitation forms will be considered responsive. Bidders are required to provide detailed contractor information, including CAGE code, point of contact, quote, and delivery terms, with all items to be delivered FOB destination in Silverdale, Washington. Lead times and delivery dates must be clearly stated, and the manufacturer’s details—name, address, and country of origin—must be declared per Section K. Compliance with the FAR 52.204-24 requirement regarding cybersecurity and information systems must be confirmed by checking the appropriate boxes. Contractors must ensure their proposals meet the NIST SP 800-171 security requirements unless the items being quoted are classified as Commercial Off-The-Shelf (COTS), in which case an exemption applies but must be explicitly identified and documented during bidding. Any COTS items must be clearly marked and justified to the contracting officer. The solicitation must be reviewed in its entirety, with specific attention to Box 28 and the certification requirements in Boxes 30a, 30b, and 30c on Page 1. All submissions must be complete, accurate, and submitted via email only; failure to comply with any submission requirement will render a bid non-responsive. The place of performance is specified as Silverdale, Washington, with the contracting officer contact information provided for questions and submission purposes.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 24 hours
View Details
NAICS: 315990
New
Federal
NITRILE GLOVESTo be considered responsive, bidders must submit a fully signed and completed solicitation via email to donna.todd@dla.mil by the deadline of July 28, 2026 at 7:00 PM ET, with electronic submissions accepted only through SAM.gov. The solicitation, numbered SPMYM226Q7821, is a total small business set-aside for Nitrile Gloves under NAICS code 315990, issued by the DLA Maritime - Puget Sound office in Bremerton, Washington. Bidders must complete all required fields, including contractor information, cage code, point of contact, quote details, FOB destination, lead time, and delivery date, and must check the appropriate boxes in clauses 52.204-24(d)(1) and (2) and 52.212-3(b)-(p). Manufacturers must be identified with full names, addresses, countries of origin, and part numbers. If the product is not commercial off-the-shelf, contractors must have a current NIST SP 800-171 assessment, no more than three years old, unless otherwise specified; COTS items are exempt but must be clearly identified during bidding. All updates and amendments will be posted on SAM.gov, and failure to comply with any requirement will render the bid unresponsive.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 332999
New
Federal
HANEL LEAN LIFT CABINET (SOLE SOURCE)This solicitation, designated SPMYM226Q7575, is a sole source procurement by DLA Maritime - Puget Sound for a Hanel Lean Lift Vertical Lift Module, model 2860-825/281/320/75/650/40, to be delivered and installed as a turn-key system at Naval Base Kitsap-Silverdale, Washington. The requirement includes not only the equipment itself but also full installation, connection to utilities, relocation of interfering electrical conduits and lighting, up to 100 feet of new conduit and wiring with an appropriate breaker, operational testing, and comprehensive personnel training. The contract further mandates the delivery of supplemental data packages including repair manuals, NRTL certification documentation, and warranty terms as defined in Exhibits A, B, and C, all subject to firm fixed pricing. Delivery is required by August 14, 2026, with FOB destination terms applying, and all shipments must comply with ASTM-D-3951 packaging standards, using heat-treated wood pallets where applicable, while strictly prohibiting materials such as asbestos, excelsior, and loose fill polystyrene. Marking of all containers must include the NSN or part number, noun nomenclature, quantity, contract number, and contractor information, with legibility ensured through any method. Proposals must be submitted electronically to Tricia Wintersteen at tricia.wintersteen@dla.mil and must include a completed and signed solicitation, manufacturer identification, country of origin, and precise lead time quoted FOB destination. Offers are evaluated as technically acceptable before price competitiveness is considered, with technical and past performance combined as approximately equal in weight to cost or price. The system must meet NFPA, NEMA, and ANSI standards, including NEMA-MG1 for motors and ASTM E-84-10m fire-retardant coating ratings. The contractor is responsible for all inspections and quality control, with final acceptance contingent upon satisfactory installation, testing, and government approval; non-conforming items may lead to rejection of the entire lot. A three-year warranty commencing at acceptance is required, and all warranty service must be performed by a factory-authorized distributor. Cybersecurity requirements mandate NIST SP 800-171 compliance and a current assessment unless the item is identified as COTS, in which case an exemption must be claimed and substantiated during bidding. Contractors must also comply with FAR and
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
Federal
SCREWThis solicitation, numbered SPMYM226Q7814, is a total small business set-aside issued by the Department of Defense through DLA Maritime - Puget Sound for the procurement of screws, with responses due by Tuesday, 28 July 2026 at 10:00 AM PST. All submissions must be made electronically via SAM.gov, and only electronically submitted, fully completed, and signed solicitations will be considered responsive. Bidders must provide their contractor information, CAGE code, point of contact, and quote FOB destination Bremerton, WA, along with manufacturer details including name, address, and country of origin in Section B.K21. Compliance with NIST SP 800-171 is mandatory unless the item qualifies as commercial off-the-shelf, in which case the bidder must explicitly identify it as such and provide supporting documentation to the contracting officer during submission. Bidders must also complete Section K by checking applicable boxes for cybersecurity requirements under FAR 52.204-24, confirm compliance with signature requirements in box 28 and boxes 30a, b, and c, and provide accurate lead times or delivery dates in Section F. The solicitation is restricted to small businesses as defined under NAICS code 332722, and all bids must be submitted via email in their completed, signed form to be eligible for award.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in about 21 hours
View Details
NAICS: 611430
New
Federal
On-Site Training Delivery by U.S. Citizen TrainerA U.S. citizen trainer is required to provide on-site instruction to PSNS personnel on the operation, programming, and maintenance of the DNM 6700 machining center, with all training to be conducted at the facility in Bremerton, Washington, zip code 98314. The contract is classified as a subcontract under NAICS code 611430 and is issued by DLA Maritime - Puget Sound under the Department of Defense, with a response deadline of July 27, 2026, at 10:00 PM Eastern Time, and the opportunity was posted on July 23, 2026. The trainer must be a verified U.S. citizen to meet security and compliance requirements, and the training must be delivered directly at the worksite to ensure hands-on proficiency for the personnel. The solicitation does not specify a set-aside designation, and no point of contact is listed.
Professional and Management Development Training

POSTED

4 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 541830
New
Federal
Preparation and Delivery of O&M ManualsThe contract requires the preparation and delivery of three hard copy and one searchable electronic version of comprehensive Operating and Maintenance manuals for equipment or systems managed by DLA Maritime - Puget Sound. These manuals must include detailed programming instructions, maintenance procedures, troubleshooting guidance, and complete parts information to ensure operational readiness and serviceability. The deliverables are to be presented in a format that ensures usability and accessibility, with the electronic copy requiring full search functionality to support efficient reference and field use. The contract is classified as a subcontract under NAICS code 541830 and is issued by the Department of Defense through its Puget Sound office located in Bremerton, Washington, with a delivery address of 98314. The solicitation was posted on July 23, 2026, and responses are due by July 27, 2026, at 10:00 PM local time. The work must be performed in alignment with the technical scope outlined in the contract notice, though specific performance locations beyond Bremerton are not detailed. No set-aside status or point of contact information is provided in the solicitation data.
Media Buying Agencies

POSTED

4 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 811212
New
Federal
IUID Marking and Data Matrix Labeling ServicesThe contract requires the application of Item Unique Identification IUID markings in compliance with MIL-STD-130N standards using Data Matrix symbols to uniquely identify equipment and assets. All markings must be encoded according to ISO/IEC and ANSI standards to ensure global readability and data integrity. In addition to physical marking, the contractor must submit the corresponding Unique Item Identifier UII data to the Wide Area Workflow Document Review WAWF-DR system, ensuring accurate and timely registration in the Department of Defense’s asset tracking database. The work is classified as a subcontract under NAICS code 811212 and is being managed by DLA Maritime - Puget Sound under the Department of Defense, with performance required at Bremerton, Washington, 98314. Responses must be submitted by 10:00 PM ET on July 27, 2026, with no set-aside provisions specified.
Computer and Office Machine Repair and Maintenance

POSTED

4 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 238210
New
Federal
Installation and Commissioning of Machining CenterThe contract encompasses the full on-site installation, mechanical and electrical integration, system startup, and commissioning of the DNM 6700 machining center at the Puget Sound Naval Shipyard in Bremerton, Washington, with a zip code of 98314. This work includes all necessary activities to bring the machining center to full operational capability, culminating in final testing and operational validation to ensure compliance with performance standards. The effort is classified as a subcontract under NAICS code 238210, indicating it falls within the electrical and wiring installation services category, and is being managed by DLA Maritime under the Department of Defense. All work must be performed at the specified location in Bremerton, and proposals must be submitted by the deadline of July 27, 2026, with the solicitation posted on July 23, 2026. The project requires precise coordination between mechanical and electrical disciplines to ensure seamless system integration and reliable long-term functionality in a naval shipyard environment.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

4 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 333517
New
Federal
Supply and Delivery of DN Solutions DNM 6700 (4th Gen) Machining CenterThe contract entails the procurement, packaging, and delivery of one DN Solutions DNM 6700 3-axis vertical machining center, fully equipped with all standard components including fluids, wiring, and interconnecting parts, ensuring full operational readiness upon arrival. The machine must meet both commercial and military shipping standards, requiring robust packaging and handling protocols to safeguard against transport-related damage. This is a subcontract under the Department of Defense, solicited by DLA Maritime - Puget Sound, with performance designated to occur in Bremerton, Washington, zip code 98314. The solicitation was posted on July 23, 2026, and responses are due by July 27, 2026, with a NAICS code of 333517 indicating classification under Machine Shop, Tool Die, and Mold Making. All deliverables must align with the specified generation—4th Gen—of the DNM 6700, and the contract requires strict adherence to defense supply chain requirements without any set-aside provisions.
Machine Tool Manufacturing

POSTED

4 days ago

DEADLINE

in about 2 hours
View Details
NAICS: 423330
New
Federal
Supply of All-Weather Flashing TapeThe contract seeks the supply and delivery of 1,008 rolls of all-weather flashing tape meeting Department of Defense logistics standards, with mandatory compliance to MIL-STD-130 for item identification marking and MIL-STD-129 for military packaging and labeling requirements. The product must adhere to strict defense-grade specifications to ensure compatibility, durability, and traceability across DoD supply chains. This is a total small business set-aside under FAR 19.5, restricted exclusively to small businesses certified by the SBA, and classified under NAICS code 423330 for wholesale trade of construction materials. Performance is required at Bremerton, Washington, 98314, with responses due by 6:00 p.m. on July 28, 2026. The solicitation is issued under DLA Maritime - Puget Sound, a component of the Department of Defense, and is structured as a subcontract opportunity. The solicitation was posted on July 23, 2026, and all bidders must ensure full compliance with marking, packaging, and delivery standards to qualify, with no exceptions permitted for nonconforming submissions.
Roofing, Siding, and Insulation Material Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 332618
New
Federal
SECURITY FENCINGThe solicitation SPMYM226Q7478 for SECURITY FENCING is a Total Small Business Set-Aside under FAR 19.5, issued using commercial and simplified acquisition procedures per FAR Parts 12 and 13.5, with a NAICS code of 332618. It requires the supply and installation of security fencing, gates, gate motors, and solar lights as two distinct line items—FENCING MATERIAL and LABOR FOR INSTALLATION—each with a quantity of one, to be delivered FOB Destination to the Naval Shipyard Puget Sound Detachment at NAS North Island in San Diego, California, on or before July 27, 2026. The resultant award will be a firm fixed-price contract, and offerors must complete all representations and certifications in SAM.gov, including a current Unique Entity Identifier and CAGE code, while affirming small business status. All submissions must reference the solicitation number in the subject line and be sent via email to Denise Quist at denise.quist@dla.mil by the deadline of July 13, 2026. A mandatory site visit is required on July 27, 2026, during two time slots: 0700–0900 and 1100–1300. Contractors must comply with stringent packaging and marking standards per ASTM-D-3951, prohibiting asbestos, excelsior, loose fill polystyrene, and shredded paper; non-manufactured wood must be heat treated to 56°C for 30 minutes and ALSC-certified, with pallets required except for small parcel shipments. Labeling must include NSN, FSN, or part number, noun nomenclature, quantity, contract number, and origin/destination details. Unique items must comply with MIL-STD-129 and MIL-STD-130 for machine-readable marking and UDI data elements. Inspection and acceptance occur at destination by the receiving activity, with any single nonconformance potentially leading to rejection of the entire shipment. Invoicing must be submitted electronically through WAWF with Transportation Control Numbers and carrier tracking, with invoices limited to once every two weeks. Contractors must adhere to NIST SP 800-171 for CUI protection, DFARS 252.204-7020, Executive Order 1355
Other Fabricated Wire Product Manufacturing

POSTED

4 days ago

DEADLINE

in 2 days
View Details
NAICS: 333248
New
Federal
DNM 6700 4TH GENERATIONThe U.S. Department of Defense, through DLA Maritime - Puget Sound, is soliciting a sole-source, firm fixed-price supply contract for one DNM 6700 4th Generation 3-Axis Vertical Machining Center from Ellison Technologies under commercial item procedures outlined in FAR Parts 12 and 13.5. The item, classified under NAICS code 333248 and Product Service Code 3417, will be delivered FOB Destination to Puget Sound Naval Shipyard in Bremerton, Washington, with final acceptance performed by the Government at Building 514 D1. The contract requires full compliance with commercial packing standards ASTM-D-3951, military marking standards MIL-STD-129 and MIL-STD-130, including mandatory two-dimensional Data Matrix barcodes encoding Unique Item Identifiers in accordance with ISO/IEC 16022, ISO/IEC 15434, and ANSI MH10.8.2. Wood packaging must be heat-treated to 56°C for 30 minutes and certified by an ALSC-recognized agency, while prohibited materials include asbestos, excelsior, loose fill polystyrene, and hygroscopic substances. The equipment must be OSHA-certified by a nationally recognized testing laboratory, accompanied by three hard copies and one searchable electronic copy of comprehensive operating and maintenance manuals, and include on-site training by a U.S. citizen representative. All offerors must be registered in SAM.gov, provide a valid CAGE code, complete all representations and certifications, and indicate whether the item qualifies as Commercial Off-The-Shelf, which exempts it from NIST SP 800-171 cybersecurity requirements. The solicitation mandates adherence to clauses covering child labor, whistleblower rights, prohibited contractors, supply chain security, and anti-discrimination policies, with a requirement that offers include delivery lead times and pricing for each CLIN. Offers must be submitted via email to Naomi Larson at naomi.larson@dla.mil by 27 July 2026, with delivery scheduled for 30 September 2026. Invoicing must be processed through WAWF, and the payment office is located at the same DLA Maritime facility in Bremerton. The award will be based on a trade-off analysis of technical merit, price, and performance, without specifying the relative weight of non-price factors. No contract
All Other Industrial Machinery Manufacturing

POSTED

4 days ago

DEADLINE

in about 2 hours
View Details