Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electromagnetic Shielding Material Supply

Active

Federal

Response Deadline08/12/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

335999 - All Other Miscellaneous Electrical Equipment and Component ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 12

Submission deadline

Response Deadline

08/12/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of conductive gaskets, EMI shielding coatings, or specialized composites ensuring electrical grounding and interference protection in aircraft ground shields.

Similar Contracts

Same NAICS industry code

INSULATION SLEEVING SE

Solicitation # SPE4A6-26-T-11ZR

The contract specifies the procurement of an Electrical Insulation Sleving Set with part number LNCL-12-140-CK-N and NSN 5970015164430, quantity of 60 kit units, under solicitation SPE4A6-26-T-11ZR. The item is subject to stringent technical and quality requirements mandated by the DLA Master List of Technical and Quality Requirements, including mandatory Item Unique Identification (IUID) in compliance with MIL-STD-130, and must be packaged and marked per MIL-STD-2073-1E and MIL-STD-129 with special shelf life marking code 32. The item is classified as a Critical Application Item with a non-extendable shelf life of 60 months, requiring strict adherence to preservation and packaging standards. Mercury and mercury-containing compounds are strictly prohibited from direct contact with the item or its packaging, except for functional uses in batteries, lamps, or instruments as specifically authorized by NAVSEA. Sampling must follow MIL-STD-1916 or a comparable zero-based plan, with zero non-conformances required unless otherwise stated. The item must be procured in lengths divisible by 10 feet and delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, PA, with a delivery deadline of January 31, 2027, despite the original required date being May 5, 2028. No quantity variance is permitted, and inspection and acceptance occur at destination, with all documentation and compliance governed by DFARS and DLA procedural notes.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-Q-0447

The contract pertains to the procurement of 86 electrical heating elements, nonimmersion type, identified by NSN 4520-01-391-8325, under solicitation SPE8E8-26-Q-0447, with a required delivery within 90 days of award. The procurement is managed by DLA Dist San Joaquin under the Department of Defense, with performance to occur in Tracy, California, 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates DLA packaging requirements and affirms that covered defense information may apply. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The point of contact for inquiries is Jennifer Luczkowski, with email and phone provided, and responses are due by August 11, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 3 hours ago

DEADLINE

TAILLIGHT, VEHICULAR

Solicitation # SPE8E7-26-T-3457

The contract pertains to the supply of one vehicular taillight with NSN 6220-20-011-6730 and part number 106583, sourced from LIFTKING MANUFACTURING CORP, under solicitation SPE8E7-26-T-3457. Delivery is required within 20 days FOB origin, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific preservation, wrapping, and unit packaging codes, while marking adheres strictly to MIL-STD-129 without special identification. The shipment is to be delivered to USS WASP LHD 1 at FPO AE 09556 via the fastest traceable method, explicitly prohibiting parcel post. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements apply, and the contract incorporates provisions for government identification removal, covered defense information, and source approval documentation. The delivery deadline is July 30, 2026, and the contract is managed under the Defense Logistics Agency with primary point of contact Kelly Mitchell. Pricing is set at $1.00 per unit for a total of $1.00, and all logistics and administrative codes are designated for government use only.

Defense Logistics Agency

POSTED

about 3 hours ago

DEADLINE

INSULATION SLEEVING, EL

Solicitation # SPE4A6-26-T-12BM

This contract specifies the supply of electrical insulation sleeving under NSN 5970-01-365-9143 and part number HS40-400-4, with a quantity of two units to be delivered within 171 days to the DLA Distribution San Joaquin facility in Tracy, California. The item is designated as a critical application product and must comply with stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, including sampling protocols per MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with units provided on reels, spools, or coils and palletized according to DLA packaging guidelines. The contract prohibits the intentional introduction of mercury or mercury-containing compounds into the product, except for specific exempted applications such as functional batteries, fluorescent lamps, sensors, or chemical reagents as approved by NAVSEA, and any portable mercury-containing devices must include a secondary containment barrier. Transportation instructions and freight shipping details are governed by DLA Procurement Notes C19 and C20, with delivery terms FOB origin and no variance allowed in quantity. Documentation for source approval and hazardous material handling must meet specific contractual conditions, and all deliveries must be received at the designated facility by the required delivery date of March 4, 2027.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

CONTACT, ELECTRICAL

Solicitation # SPE7M2-26-Q-0718

This contract pertains to the supply of electrical contacts designated by NSN 5999-01-082-0297, with a quantity of 7,597 units to be delivered under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required within 250 days after the award date, with inspection and acceptance occurring at the destination. The item is classified as a commercial item and is listed on a qualified products list, requiring strict adherence to the SAE AS39029E standard, including the mandatory marking of both the current and most recently superseded part numbers on each unit pack. The product is designated a critical application item with technical documentation aligned to TDP Rev B Gen 3 and must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, packaging materials, and unit container configurations. Marking must follow MIL-STD-129 with no special marking required. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specified functional uses like batteries, fluorescent lamps, sensors, and naval system components, which must meet additional containment and shockproofing requirements per NAVSEA 5100-003D. All packaging, labeling, and shipping of hazardous materials must comply with IP025 requirements. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical and quality mandates, with revisions controlled by the solicitation issue date. Deliveries are to be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Proc Note C19 and C20. The contract was issued under solicitation SPE7M2-26-Q-0718 with a proposal deadline of August 11, 2026, and the requirement is funded for a material need date of July 17, 2027.

NUCLEAR REACTOR PROGRAM

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-11WH

The contract pertains to the procurement of three electrodes identified by NSN 5977-01-264-3739 and part number 40369LM, supplied by Brantner and Associates, Inc. under solicitation SPE4A6-26-T-11WH. The items must be delivered FOB origin within 171 days, with zero variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129, with no special markings required. Palletization aligns with DLA packaging requirements, and preservation methods must exclude mercury or mercury compounds in any form, including packaging materials. Mercury-containing components such as batteries or instruments are permitted only under specific exceptions defined by NAVSEA, and all such items must include a secondary containment and be shock-proof per NAVSEA 5100-003D. Sampling and inspection protocols require adherence to MIL-STD-1916 or ASQ H1331, with zero non-conformances permitted unless otherwise stated, and critical attributes are assigned verification levels or AQLs as prescribed. The item has no shelf life requirement. All technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled based on acquisition type and amendment dates. Documentation for source approval, engineering change proposals, and deviation requests must be formally submitted and approved. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation instructions are aligned with DLAD procedural notes. The contract specifies a unit price of $3.00 per each, with a total contract value of $9.00. The solicitation was issued on August 4, 2026, with responses due by August 12, 2026, and the original required delivery date is March 22, 2027. The primary point of contact is Victoria Burcham of the ASC Commodities Division, Department of Defense.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A7-26-T-610G

This contract is for the procurement of 28 units of a junction box identified by NSN 5975-01-174-3646 and part number A-8064CHAL from Hoffman Engineering Co, a division of Federal Cartridge Corp, with CAGE code 63098. The item is classified as a commercial off-the-shelf (COTS) product and designated as a critical application item. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds in the hardware, its packaging, preservation, or marking, with limited exceptions for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents; portable mercury-containing devices must be shockproof and include a secondary containment boundary in compliance with NAVSEA 5100-003D. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization must adhere to DLA packaging requirements. The item is delivered FOB origin with zero variance in quantity, inspected and accepted at the destination. Delivery is required within 58 days of contract award, with an original required delivery date of October 25, 2026, and a need ship date of October 10, 2026. The unit price is $28.00 per unit, totaling $784.00, and the contract is issued under solicitation SPE4A7-26-T-610G. The delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, and transportation details are governed by DLAD Proc Notes C19 and C20.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

CONNECTOR BRUSH

Solicitation # SPE4A5-26-T-322R

The U.S. Department of Defense, through DLA Aviation, is seeking quotes for 27 units of NSN 5977012318738 CONNECTOR BRUSH, with delivery required to the DLA Distribution Depot Hill within 262 days after contract award. The procurement is conducted via a requested quotation (RFQ) under solicitation number SPE4A526T322R, with no hard copies available—only the electronic version accessible through the provided online link. The approved source for this item is supplier 73030 572866, and only electronic submissions will be accepted. All responsible suppliers may submit a quote provided it is received by the deadline of August 12, 2026. No technical specifications, plans, or drawings are provided, and the solicitation is open to all qualified sources without set-aside restrictions. The North American Industry Classification System code is 335999, and inquiries must be directed by email to the designated point of contact, with further details available through the SAM.gov portal using the solicitation number. The contracting office is located in Richmond, Virginia, under the agency name Department of Defense.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 3 hours ago

DEADLINE

TAPE, INSULATION, ELECTR

Solicitation # SPE4A6-26-T-12KH

This contract specifies the procurement of electrical insulation tape identified by NSN 5970009445015, designated as a commercial item with critical application status and a non-extendable shelf life of 18 months under TYPE I (CODE K) requirements. The tape must conform to technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or comparable zero-based plans, requiring zero non-conformances unless otherwise stated. Acceptance is at destination under FOB destination terms with no tolerance for quantity variance, and packaging and marking must comply strictly with MIL-STD-2073-1E and MIL-STD-129, including the special marking code 33 for shelf-life indication. The item must be palletized per DLA packaging requirements and shipped within five days of contract award. Approved suppliers include Saint-Gobain Performance Plastics Corp, Rogers Corporation, and Hawkeye International, LLC, each with specific part numbers. Documentation for source approval and shelf-life compliance is mandatory, and the unit of issue is RO with a total quantity of 136 RO. The solicitation, issued under SPE4A6-26-T-12KH by the Department of Defense’s ASC Commodities Division, has a response deadline of August 12, 2026, with performance required at Goldsboro, NC. The contract enforces full adherence to DLA’s packaging and identification protocols, including the removal of government identification from non-accepted supplies and documentation requirements tied to source approval. Inspection and acceptance occur at the destination, and all materials must be prepared with specific preservative methods, containment types, and labeling standards. The contract underscores strict compliance with quality assurance provisions, where unspecified attributes are treated as major, and zero-tolerance acceptance criteria apply to samples unless explicitly modified by contract wording. All requirements are binding under the DLA master document revisions in effect as of the solicitation issue date.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

HOLDER, ELECTRICAL C

Solicitation # SPE4A6-26-T-12KJ

The contract is for the procurement of 497 electrical contact brush holders identified by NSN 5977-00-091-6355 under solicitation SPE4A6-26-T-12KJ, with a delivery requirement of 31 days after order. The item is classified as a commercial item and must comply with DLA packaging, technical, and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be verified at predefined levels: VII for critical, IV for major, and II for minor. The item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including through foreign national employees or subsidiaries, with DFARS 252.225-7048 governing its handling. Access to controlled technical data is restricted to DLA contractors with approved US/Canada Joint Certification Program status, completion of mandated DOD export control training, and formal approval from DLA. Cybersecurity requirements mandate CMMC Level 2 certification by a C3PAO, and physical identification and marking of the item must meet specified standards. All defense information covered under RD002 is subject to protection protocols. The point of contact is Marcita Robinson of the ASC Commodities Division, with performance located in New Cumberland, Pennsylvania.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE4A6-26-T-11TG

The contract pertains to the procurement of five electrodes identified by NSN 5977-01-039-9640 under solicitation SPE4A6-26-T-11TG, with a delivery deadline of 171 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to either the solicitation issue date or award date depending on acquisition size, and any amendments take precedence if issued. The item involves controlled technical data subject to ITAR or EAR export regulations, requiring strict compliance with DFARS 252.225-7048; disclosure to foreign persons, including foreign nationals in the U.S., is prohibited without prior authorization. Contractors must hold JCP certification, complete mandatory DOD export control training and the DLA questionnaire, and receive explicit approval from the DLA controlling authority to access the technical data. Additional requirements include CMMC Level 2 certification for third-party assessors, adherence to DLA packaging standards, configuration change management procedures, inspection and acceptance at origin, removal of government identification from non-accepted items, documentation for source approval requests, and stringent physical marking of the bare item. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and the place of performance is in Tracy, California, under the oversight of the Department of Defense’s ASC Commodities Division.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

CABLE, SPECIAL PURPO

Solicitation # SPE7M0-26-T-028E

The contract specifies the procurement of a special purpose cable identified by NSN 6145-01-619-4942, with a quantity of 10 units required under purchase request 7017715761. Delivery must be completed within five days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible through the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment later updates the referenced revision. The alternate offeror is obligated to submit a complete data package, including specifications for both the approved and alternate part, despite no specific data being currently available. The solicitation number is SPE7M0-26-T-028E, issued on August 4, 2026, with responses due by August 17, 2026, under NAICS code 335999. The contracting activity is managed by the Maritime Supply Chain ESOc Buys within the Department of Defense, and all correspondence should be directed to Abaigael Masterson at the provided contact details.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 3 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON

Same awarding agency

MANUAL, TECHNICAL

Solicitation # SPE8EE-26-T-2212

This contract pertains to the procurement of one unit of a technical manual identified by NSN 7610016796815 and part number 10515-0512-4000, issued to L3HARRIS GLOBAL COMMUNICATIONS, INC. under solicitation SPE8EE-26-T-2212, with a required delivery date of July 31, 2026, and a ten-day delivery window FOB origin. The product must be packaged in strict compliance with ASTM D3951, but all DLA Master List of Technical and Quality Requirements—identified by R or I numbers including RP001 for packaging, RQ011 for removal of government identification from non-accepted supplies, and RD003 for covered defense information—take precedence over any industry standard. Packaging and labeling must adhere to MIL-STD-129, with palletization dictated by DLA packaging standards, and the Unit of Issue and Quantity per Unit Pack must mirror the contract specifications. The item is destined for US Army SSA Powidz AB in Poland, with the government’s freight shipping and mark for address matching the delivery location. All documentation and fulfillment must align with DLA procurement procedures, including specific transportation notes C19 and C20. The contract includes a zero variance tolerance on quantity and requires inspection and acceptance at the destination. Government-specific codes and identifiers are embedded for internal tracking, including an IPD, DIC, and project code, and the solicitation was posted August 4, 2026, with responses due by August 17, 2026.

Commercial Printing (except Screen and Books)

POSTED

about 3 hours ago

DEADLINE

FIBER ROPE ASSEMBLY, SI

Solicitation # SPE8EE-26-T-2213

The U.S. Department of Defense, through DLA Troop Support, is soliciting quotes for 156 units of Fiber Rope Assembly, SI, identified by NSN 4020013653115, under solicitation number SPE8EE26T2213. This procurement is restricted to SBA-certified Women-Owned Small Businesses under the WOSB Program and is being conducted as a combined solicitation with no hard copies available; all submissions must be made electronically through the SAM.gov portal. The contract requires delivery to DLA Distribution Red River within 175 days after award, and only approved sources listed as 27232 DSG-5-11K and 57282 0086-CSI-11K are eligible. Specifications, plans, or drawings are not provided, and responsible sources may submit quotes if received by the deadline, which is August 17, 2026. The solicitation was posted on August 4, 2026, and inquiries must be directed to the designated buyer via email, with further details accessible through the provided UI link or the DIBBS website using the solicitation number. The procuring office is located in Philadelphia, Pennsylvania.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 3 hours ago

DEADLINE

LUBRICATOR, AIRLINE

Solicitation # SPE8EE-26-T-2211

The contract is for the procurement of one Lufticator, Airline, identified by NSN 4930-01-284-6948 and part number P8B-860-M3DA, with a required delivery within 20 days of contract award. The item must be delivered FOB destination with no variance in quantity allowed and is subject to inspection and acceptance at the destination point. Packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with palletization governed by DLA’s Packaging Requirements for Procurement, and all technical and quality requirements from the DLA Master List of Technical and Quality Requirements supersede any conflicting ASTM standards. The shipment must not be sent via parcel post and must use the fastest traceable means, addressed to USS NEW YORK LPD 21 at FPO AA 34092 with RDD 777 and project code ZH9 TP 2. The sole unit of issue is each, with a total price of $1.00. The solicitation number is SPE8EE-26-T-2211, with a response deadline of August 17, 2026, and the contract is issued under the DoD with NAICS code 325998. Covered defense information applies, and government identification must be removed from non-accepted supplies. All vendor actions must reference the VSM system and the designated point of contact, Philip Ferrara, at DLA.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 3 hours ago

DEADLINE

LUBRICATING GUN, HAN

Solicitation # SPE8EE-26-T-2210

This contract is for the procurement of four lubricating guns, specifically the ALEMITE LLC DBA SKF USA INC. model 500-E, identified by NSN 4930-01-665-6928, classified as a commercial off-the-shelf item. Delivery is required within five days of contract award, with shipment terms FOB destination and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging mandated to comply with ASTM D3951 and MIL-STD-129 labeling, subject to the overriding authority of the DLA Master List of Technical and Quality Requirements. Packaging must adhere to DLA’s RP001 packaging standards, including palletization, and the unit of issue is each, with four units total. The items are destined for FPO AP 96349 and the physical delivery address at Yokosuka Naval Base in Japan, with specific transportation instructions governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE8EE-26-T-2210, with a required delivery date of August 3, 2026, and all technical specifications referenced via R and I numbers in the DLA Master List must be met. Government-specific identifiers and administrative codes are included for internal tracking and logistics coordination.

Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8EE-26-Q-0415

The contract solicitation SPE8EE-26-Q-0415 seeks 51 coils of fibrous cord, NSN 4020-00-233-6556, with each coil measuring 1,200 feet, for a total quantity of 51 CL, under a firm fixed price arrangement with no variance allowed in quantity. The product must conform to specification A-A-55622B, Type 1, Class 3, Size 6, in natural color, and be packaged in accordance with ASTM D3951 and MIL-STD-129, with palletization following DLA’s packaging directives. Delivery is required within 130 days after date of award, with inspection and acceptance occurring at destination. The item is subject to the Qualified Suppliers List for Manufacturers and Distributors (QSLM/QSLD) program, meaning only suppliers listed on the DLA-approved QSLM or QSLD may submit offers, and any offer must clearly identify both the manufacturer and distributor if a QSLD is involved. Government source inspection is waived for approved QSLM/QSLD vendors, and related quality conformance requirements such as COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 do not apply. Non-compliance with QSL requirements constitutes a deviation and may result in rejection, and supplying non-compliant products may lead to criminal penalties. Packaging must be labeled and marked to DLA standards, and the delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over other standards.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8EE-26-T-2209

Fibrous rope, compliant with MIL-DTL-24050F, is being procured under solicitation SPE8EE-26-T-2209 with a total quantity of five reels, each containing 200 yards for a cumulative length of 600 feet per reel, totaling 3000 feet. The rope is made of nylon, has a circumference of 3-3/4 inches, and is supplied in natural color with no multiple lengths per unit permitted; each reel weighs 239 pounds net, and pricing is based on net weight per pound. Delivery is required FOB destination within 20 days of contract award, with zero tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E, including marking per MIL-STD-129 with no special marking required. The item is identified by NSN 4020-00-106-9406 and is subject to strict quality conformance requirements per RQ006, which mandate sampling per MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified. Critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury and mercury-containing compounds are prohibited except in specific exempted applications such as functional batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents; portable devices containing mercury must have shockproof construction and a secondary containment boundary. Only manufacturers and distributors listed on the Qualified Supplier List for Manufacturers/Distributors (QSLM/QSLD) for FSC 4020 are eligible to respond; non-compliance constitutes a deviation and renders the offer invalid. Suppliers must affirm compliance with QSLM/QSLD; failure to do so may result in criminal penalties. Government source inspection is waived for QSL-compliant suppliers, and COQC, PVT, and QAP-EQ003 requirements are inapplicable in such cases. The delivery address is Fleet Activities Sasebo, Japan, and the transportation instructions follow DLAD Procurement Notes C19 and C20. The required delivery date is August 5, 2026.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE8EF-26-T-1541

The contract pertains to the procurement of one unit of a CHAMBER, SURGE with NSN 1740-01-498-6211 under solicitation SPE8EF-26-T-1541, requiring delivery within 20 days to FE Warren Air Force Base in Wyoming. The item must be packaged and labeled in strict accordance with MIL-STD-129 and ASTM D3951, with palletization following DLA’s RP001 packaging requirements, and all technical and quality specifications from the DLA Master List of Technical and Quality Requirements take precedence. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the contract applies to Covered Defense Information. The unit of issue is one each, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Shipping must be via traceable freight methods, not parcel post, and the delivery is FOB origin. The supplier is Pacific Consolidated Industries LLC with part number 791729-001, and the contract includes specific government markings, project codes, and a required delivery date of July 31, 2026. The point of contact is Russell Keiser, and the solicitation was posted August 4, 2026, with a response deadline of August 17, 2026.

Construction Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

Inspection & Acceptance Testing Services

Landscape Architectural Services

POSTED

DEADLINE

Supply Chain Traceability & Quality Documentation

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Packaging, Preservation & Marking Services

Packaging and Labeling Services

POSTED

DEADLINE

Precision Metal Fabrication & Welding

Sheet Metal Work Manufacturing

POSTED

DEADLINE

Aircraft Ground Shield Manufacturing

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE