Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Electronic Component Marking & Traceability Services

Active

Federal

Response Deadline08/19/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive physical identification and marking of electronic components in strict alignment with J-STD-609 and MIL-STD-129 standards, ensuring full traceability and compliance across the defense supply chain. This includes bare item marking to enable accurate identification throughout procurement, assembly, and deployment phases, with an emphasis on durability, legibility, and adherence to federal military specifications. The work supports the integrity of defense logistics by guaranteeing component authenticity, origin tracking, and regulatory conformity at every stage. This is a total small business set-aside subcontract under NAICS code 334418, issued by the Department of Defense through the Maritime Supply Chain office, with a response deadline of August 19, 2026. The solicitation is exclusively available to small businesses as defined by the SBA, and performance is expected to support defense-related supply chain operations without geographic restrictions specified. Interested parties must submit proposals by the stated deadline through the official DIBBS portal to be considered for award.

General Info

Small business set-aside for defense component marking per J-STD-609 and MIL-STD-129, due August 19, 2026.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 19

Submission deadline

Response Deadline

08/19/2026, 05:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide physical identification and marking of electronic components per J-STD-609 and MIL-STD-129, including bare item marking and traceability for defense supply chain compliance.

Similar Contracts

Same NAICS industry code

CIRCUIT CARD ASSEMB

Solicitation # SPE7M1-26-T-250H

The contract pertains to the procurement of 30 circuit card assemblies identified by NSN 5998-00-111-4498 and part number 65901-02973-044, with a unit price of $30.00 and a total value of $900.00. Delivery is required within 20 days under FOB origin terms, with no variance allowed in quantity, and acceptance occurs at the origin point. The items must be packaged in compliance with MIL-STD-2073-1E, marked according to MIL-STD-129, and contain no special marking codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, with Covered Defense Information rules applied. The goods are destined for the Government of Israel, Ministry of Defense, with a specified freight forwarder and government use identifiers included. The solicitation number is SPE7M1-26-T-250H, issued by the Department of Defense’s Maritime Supply Chain, with a response deadline of August 17, 2026, and a required delivery date of August 7, 2026. The contract falls under NAICS code 334418 and is administered through DLA’s eProcurement system, with all unit of issue conversions defined by official DoD standards.

MARITIME SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

CIRCUIT CARD ASSEMB

Solicitation # SPE7M5-26-T-368N

The contract is for the procurement of 171 circuit card assemblies identified by NSN 5998-01-501-9986 and part number TU14404P, awarded under solicitation SPE7M5-26-T-368N as a Women-Owned Small Business Set-Aside. Delivery is required within 29 days of award, with shipment originating FOB origin and inspection and acceptance occurring at the destination. The item is designated as a critical application item and is subject to strict Electrostatic Discharge (ESD) and Electromagnetic Interference (EMI) protection requirements per MIL-PRF-81705, mandating the use of qualified barrier materials from suppliers listed on QPL-81705. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 39 for ESD sensitivity, and adequate cushioning must prevent physical damage to leads and terminals. Mercury and mercury-containing compounds are prohibited from direct contact with the hardware except in specified exempted applications like batteries or instruments governed by NAVSEA standards, and any portable devices containing mercury must be shockproof with secondary containment. Preservation method GX with packaging code U and specific wrap and cushioning materials are required, and all packaging must be palletized in accordance with DLA’s procurement requirements. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, with an initial ship date of March 13, 2026, and the original required delivery date set for August 11, 2026. The supplier must ensure all ESD/EMI protective materials are sourced from qualified manufacturers and provide technical packaging data if the solicitation does not explicitly require such protection but the item is susceptible to environmental degradation.

ACTIVE DEVICES DIVISION

POSTED

about 3 hours ago

DEADLINE

49--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QLA96

The contract pertains to the acquisition of seven units of a circuit card assembly used in repair or modification applications, with delivery terms set at FOB origin. Due to the flight-critical nature of the item and the lack of adequate technical data to support full and open competition, exclusive sourcing is mandated under FAR 6.302-1, requiring prior Government source approval. Only previously approved sources are eligible to respond, as they possess unique design capabilities, proprietary manufacturing knowledge, and essential technical data that are not economically available to the Government. Any prospective vendor not already approved must submit comprehensive documentation as outlined in the NAVSUP Weapon Systems Support Source Approval Information Brochures, covering either prior experience with similar items or details for new entrants. Proposals lacking complete source approval documentation or evidence of prior submission will be rejected. The Government will not delay award to accommodate new source qualification if timelines preclude it, and award will proceed based on Fleet operational needs. All submissions must be received by September 8, 2026, and responses are only considered if the offeror, product, or manufacturer meets all qualification criteria at the time of award per FAR clause 52.209-1. Market research confirms that commercial item acquisition policies under FAR Part 12 do not apply, though interested parties may still propose commercial alternatives within 15 days. Technical specifications and standards referenced are accessible through ASSIST-Online and DODSSP, with offline requests handled via the DODSSP Help Desk. The acquisition is subject to trade agreements including the Buy American Act—Free Trade Agreements and the World Trade Organization Government Procurement Agreement, as specified in applicable DFARS clauses. The point of contact for qualification inquiries is Kimberly Flores of NAVSUP Weapon Systems Support in Philadelphia, and no competitive solicitation is expected unless the Government determines otherwise based on submissions.

Navsup Weapon Systems Support

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Sole Source to Sierra Circuits, Inc. for Printed Wiring Assemblies Fabrication per attachments

Solicitation # N61331-26-Q-KS48

The U.S. Navy, through the Naval Surface Warfare Center in Panama City Beach, Florida, has issued a sole source solicitation for the fabrication of printed wiring assemblies to Sierra Circuits, Inc., based on a justified exclusivity determination. This procurement, identified by solicitation number N61331-26-Q-KS48, is categorized as a combined action under NAICS code 334418 and does not include any set-aside provisions. Interested vendors must submit their quotes by the deadline of August 10, 2026, at 4:00 PM Eastern Time, and all responses must include mandatory supporting documentation: a capabilities statement, proof of past performance on similar projects, and a valid CAGE code. The contract is for work to be performed at the Navy’s facility in Panama City Beach, Florida, and all proposals will be evaluated only if submitted by the stated cut-off date. Primary point of contact for inquiries is Kaitlin Summerville, with Jamell L. Kilgore serving as the secondary contact.

Naval Surface Warfare Center

POSTED

about 8 hours ago

DEADLINE

Call For Solutions: Circuit Card Assembly (CCA) Production Support and Scalability Solutions

Solicitation # CCA_26_01

The Army Contracting Command–Aberdeen Proving Ground, Tobyhanna Division, on behalf of Tobyhanna Army Depot, is issuing a Call for Solutions to identify innovative commercial methodologies, processes, and technologies that can rapidly scale Circuit Card Assembly production using existing Surface Mount Technology and through-hole component machinery. The initiative aims to close internal capability gaps by advancing design approaches, reverse engineering techniques, obsolescence management strategies, and supply chain resilience efforts to accelerate the development of essential CCA manufacturing data. Proposals must address scalable solutions that enhance production efficiency and responsiveness without requiring full-scale infrastructure overhauls. Responses must reference the solicitation number CCA_26_01 in the email subject line and adhere to submission guidelines outlined in the accompanying Call for Solutions document available in the attachments section. The solicitation is open through August 10, 2026, with questions and answers published as of July 28, 2026. The primary point of contact is Dean Berkovics, reachable via email and phone, and the place of performance is Tobyhanna, Pennsylvania. The North American Industry Classification System code associated with this effort is 334418, indicating an electronic component manufacturing context. While no contract value, evaluation criteria, delivery schedules, or detailed technical specifications are provided in the available documentation, respondents are directed to review the associated Army Open Solicitation on SAM.gov for complete structural context. All submissions must be submitted through the established channel, and no contract clauses, representations, certifications, packaging requirements, or administration data are included in the current documentation, leaving the full scope of obligations to be determined through the submission process and any attached materials referenced in the Call for Solutions.

W6QK Acc-Apg Cont Ct Tyad Ofc

POSTED

about 8 hours ago

DEADLINE

PCB Assembly (SIT8 Connector) Supply

POSTED

DEADLINE

Electronic Component Supply – Amplifier Unit

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Component-Level Qualified Manufacturing (QML/QPL)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electrical Connector Manufacturing and AssemblyThe contract entails the manufacture and assembly of 39 military-grade electrical connector receptacles designated by NSN 5935002553375 and Part No MS90362-1, strictly adhering to SAE AS90362-A1 and SAE AS81790A technical standards. The work involves precision fabrication and assembly processes to meet rigorous defense requirements, ensuring the components are fully compliant with industry and military specifications for reliability and performance in operational environments. This is a subcontract under a total small business set-aside classification, meaning only small businesses certified by the Small Business Administration are eligible to bid, promoting economic opportunity within the defense supply chain. The solicitation opportunity was posted on August 4, 2026, with a response deadline set for August 19, 2026, and is managed under the North American Industry Classification System code 334418, which covers other electronic component manufacturing. The procuring agency is the Maritime Supply Chain within the Department of Defense, indicating the connectors are destined for naval or maritime platforms. While specific performance location and point of contact details are not provided, the official solicitation can be accessed through the DIBBS portal at the given URL, and all bidders must comply with federal acquisition regulations governing small business set-asides and defense subcontracting.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Circuit Card Assembly (CCA) ManufacturingThe contract requires full manufacturing, assembly, and testing of a circuit card assembly to meet Department of Defense technical and quality standards under the DLA framework, with strict adherence to packaging specification RP001. All work must be completed and delivered within five business days after delivery order issuance, demanding a highly efficient and reliable production process with minimal latency. The performance location is CHEBOYGAN, MI, with the NAICS code 334418 indicating the specialized electronics manufacturing sector. This is a subcontract opportunity issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office, with responses due by August 17, 2026, and posted on August 4, 2026. Failure to meet the stringent quality benchmarks or the five-day delivery requirement will result in noncompliance.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Domestic-Compliant Electronics Supplier (Alternative Source Qualification)The contract seeks a domestic supplier capable of providing a magnetic contactor that is functionally equivalent to the original specification but manufactured by an alternative source, ensuring compliance with U.S. sourcing requirements. The replacement component must meet all technical performance standards and undergo rigorous review by the Defense Logistics Agency’s Engineering Support Activity to verify suitability for future procurements, with approval necessary before any supply arrangement is finalized. The goal is to establish a qualified domestic alternative that maintains operational integrity while supporting supply chain resilience and domestic industrial capacity. This solicitation is classified as a subcontract under NAICS code 334418, managed by the Department of Defense through the Maritime Supply Chain office, with performance required at Tracy, California, 95304-5000. The opportunity was posted on August 4, 2026, and responses are due by August 17, 2026. There is no set-aside designation, and all interested parties must demonstrate their ability to deliver a compliant, domestically sourced product that satisfies engineering and logistical criteria for long-term adoption across DLA procurement channels.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Electrical Connector Manufacturing & Supply

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250L

The contract pertains to the procurement of 307 units of an automatic gas alarm with NSN 6665-01-499-7234 under solicitation SPE7M1-26-T-250L, issued by the Department of Defense’s Maritime Supply Chain division. The solicitation is a total small business set-aside, with responses due by August 17, 2026, and requires delivery within 13 days after award. All supplies must comply with DLA packaging requirements and technical quality standards referenced in the DLA Master List of Technical and Quality Requirements, where revisions in effect at the time of solicitation issue or award govern compliance. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the supplied hardware except under specific exemptions for functional uses such as batteries, fluorescent lights, weapons systems, or authorized instruments, with portable devices containing mercury required to be shockproof and feature a secondary containment boundary in accordance with NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts, as no existing data is available. The place of performance is Tracy, California, 95304-5000, and the primary point of contact is Misty Slone, reachable via email and phone provided.

Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-26-Q-1335

The seal assembly is a shaft-mounted, spring-loaded mechanical seal requiring pure carbon material proprietary to Morgan Advanced Materials, specifically Cage 80894, as defined by Drawing 5773203, Sheet 26. Manufacturing must comply with NAVSEA 5773203, Piece No. 10A, and Drawing Sheets 26 and 30, with three critical deviations: the outer shell must follow Ram Seal Drawing 01-250159 Rev B, the drive band must adhere to Ram Seal Drawing 11-250159 Rev B, and the spring retainer must conform to Ram Seal Drawing 12-250259 Rev A. Each unit must be delivered with a complete installation kit containing specified O-rings identified by part numbers 5773203-1.6, 5773203-1.7.1, 5773203-12.6.4, 5773203-1.8.1, 5773203-1.9.1, 5773203-4.1, 5773203-10.11, 5773203-12.6.5, and a 2-inch steel spanner wrench with a .250 inch pin per Fed Spec GGG-W-665 Type 2 Grade A. The contract mandates a Certificate of Quality Compliance for each manufacturing lot, prepared in accordance with the Supplemental Quality Assurance Provision, and requires electronic submission of each COQC via the iRAPT system. Product verification testing may be invoked at the government’s discretion under DLAD 52.246-9004, and all supplies must conform to DLA packaging, configuration management, and inspection requirements including RQ002, RQ009, and RD003. The NSN 4320-01-269-8849 is solicited under a total small business set-aside with a delivery deadline of 30 days ADO for 104 units, sourced through the Department of Defense’s Maritime Supply Chain under contract SPE7M1-26-Q-1335.

Air and Gas Compressor Manufacturing

POSTED

about 3 hours ago

DEADLINE

MODIFICATION KIT, EL

Solicitation # SPE7M1-26-T-250F

This contract specifies the procurement of a Modification Kit, EL, with NSN 6105-01-705-8310 and part number 377-53322-000, supplied by JOHNSON CONTROLS NAVY SYSTEMS, LLC. The delivery is for one unit, to be shipped FOB destination within 20 days of contract award, with no quantity variance allowed. All packaging and preservation must strictly comply with MIL-STD-2073-1E, Appendix D, for kits, and marking must adhere to MIL-STD-129. Packaging requirements as defined by DLA’s RP001 apply, including palletization and the use of specified preservation methods, wrapping, and cushioning materials. The item is designated as a Critical Application Item and may involve Covered Defense Information under RD003. Technical and quality requirements referenced via R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the revision in effect on the solicitation issue date controlling. The delivery destination is the USS CANBERRA LCS 30 at FPO AP 96694, and shipment logistics must follow DLAD Proc Note C19 for transportation and C20 for first destination delivery. The contract solicitation number is SPE7M1-26-T-250F, with a required delivery date of August 3, 2026, and procurement is managed under NAICS code 333618 by the Department of Defense’s Maritime Supply Chain.

Other Engine Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

INDICATOR, CARBON MONOX

Solicitation # SPE7M1-26-T-250G

This contract specifies the procurement of a carbon monoxide indicator unit with part number BWC2-M25100 and NSN 6665200018480, with a quantity of five units to be delivered within 20 days to the USS ROBERT SMALLS CG 62. Delivery is FOB destination with zero variance allowed and inspection and acceptance occurring upon arrival. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific storage and handling requirements such as dry climate control and prohibition of cushioning materials. All hazardous materials, including lithium batteries, must adhere to DLA packaging and shipping standards, with marking and documentation following strict DoD guidelines. The item is classified as a critical application product with a TYPE 2 shelf life of 12 months extendable, and no mercury or mercury-containing compounds may be intentionally added or come into direct contact with the supplied hardware except under approved exceptions for functional components like certain instruments or sensors as defined by NAVSEA. Suppliers are required to submit Safety Data Sheets (SDS) and Hazard Communication Standard (HCS) compliant labels in accordance with 29 C.F.R. 1910.1200, effective since June 1, 2015, replacing the previous Material Safety Data Sheet (MSDS) requirements. Employees must be trained on these updated standards, including proper classification, labeling, and handling procedures. The contract incorporates technical and quality requirements from the DLA Master List, and the unit of issue is defined by DoD standards. The solicitation number is SPE7M1-26-T-250G, with a required delivery date of August 3, 2026, and responses due by August 17, 2026. Transportation and shipment instructions reference DLA procedural notes C19 and C20, and the item is subject to federal acquisition regulations under the North American Industry Classification System code 334511.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 3 hours ago

DEADLINE

ALARM, GAS, AUTOMATIC

Solicitation # SPE7M1-26-T-250J

The contract is for the procurement of 185 units of an automatic gas alarm identified by NSN 6665-01-499-7234 under purchase request 7015538145, with a delivery requirement of 13 days after order placement. The solicitation number is SPE7M1-26-T-250J, issued by the Department of Defense’s Maritime Supply Chain through the Defense Logistics Agency, with a response deadline of August 17, 2026. The technical requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revision control depending on the type of acquisition—simplified acquisitions follow the revision in effect on the solicitation issue or award date, while large acquisitions adhere to the revision in effect on the RFP issue date unless an amendment supersedes it. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or equipment, unless exempted for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or NAVSEA-specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier in accordance with NAVSEA 5100-003D. Offerors must provide a complete data package covering both the approved and alternate parts, as no existing data is available for this item. The place of performance is Tracy, California, with Misty Slone listed as the primary point of contact.

Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M1-26-U-5053

The contract is for the procurement of 11 electrical connector receptacles with part number 2583A-125 and NSN 5935-01-524-0367, supplied by PAULUHN ELECTRIC MANUFACTURING LLP under solicitation SPE7M1-26-U-5053. Delivery is required within 57 days FOB origin with zero variance in quantity, and inspection and acceptance occur at the destination. The item is covered under DLA DIRECT, CONUS, and must comply with all DLA Master List of Technical and Quality Requirements referenced by R or I numbers, which supersede any commercial standards like ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001 DLA packaging requirements. If classified as hazardous per FED-STD-313, packaging must meet TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 is permitted. The unit of issue is each, with a total price of $11.00, and the contract includes strict requirements for removal of government identification from non-accepted supplies and bare item marking. All packaging and labeling must align with the specified QUP of 001 and DLA unit of issue guidelines.

Electronic Connector Manufacturing

POSTED

about 3 hours ago

DEADLINE

HOUSING SECTION, LIQ

Solicitation # SPE7M1-26-T-250A

This contract pertains to the procurement of a housing section and pump under solicitation SPE7M1-26-T-250A, with a single unit of 1 EA identified by NSN 4320-01-511-0467 and part number 009-1107B08-347552A from Carver Pump Company. Delivery is required within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All items must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129, including specific preservation methods, wrapping, and palletization standards. Mercury and mercury-containing compounds are strictly prohibited in or on the supplied hardware except for designated functional uses such as certain batteries, lighting, instruments, sensors, controls, weapon systems, and NAVSEA-specified reagents, with additional containment and shockproofing mandates for portable devices. Packaging must adhere to RP001 and special marking code 00-00 applies, with no unique identifiers beyond standard requirements. Shipment must be delivered to the FPO address for USS JOHN P MURTHA LPD 26 using the fastest traceable means, explicitly prohibiting parcel post, and must follow DLA procurement notes C19 and C20 for transportation routing. The supply is tied to Project LK5 TP 2 with a required delivery date of August 3, 2026, and is subject to federal procurement standards incorporating technical and quality requirements referenced from the DLA Master List. The contracting office is under the Department of Defense’s Maritime Supply Chain, with Michael Reese as the primary point of contact.

Fluid Power Pump and Motor Manufacturing

POSTED

about 3 hours ago

DEADLINE

COIL, ELECTRICAL

Solicitation # SPE7M1-26-T-250E

The contract pertains to the procurement of two electrical coils identified by NSN 5950-01-582-0088 and part number 266763-902-D, supplied by IVES EQUIPMENT, LLC and AUTOMATIC SWITCH COMPANY, with a total quantity of two units at a unit price of $2.00 each, for a total contract value of $4.00. Delivery is required FOB destination within 20 days of contract award, with zero variance permitted in quantity. Inspection and acceptance occur at the destination, and packaging must comply with DLA’s Master List of Technical and Quality Requirements, including MIL-STD-129 labeling, RP001 palletization standards, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with the former taking precedence. Mercury and mercury-containing compounds are strictly prohibited except in specific functional applications such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, and when present, portable devices must include shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. All packaging must be marked and labeled per government specifications, and the shipment must be sent to the designated FPO address with transportation directives outlined in DLAD Proc Note C19 and C20. The contract is governed by DLA procurement policies, and technical specifications referenced through R and I numbers must be accessed via the official DLA Master List website. The required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026, and primary point of contact is Ryan Snyder of the Department of Defense’s Maritime Supply Chain.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 3 hours ago

DEADLINE

Solicitation # SPE7M1-26-Q-1336

This contract specifies the procurement of 2,000 O-rings made from synthetic rubber, identified by the National Stock Number 5331-00-248-3849 and part number MS29513-019, with detailed technical requirements aligned to SAE AS29513 Revision C dated October 1, 2016. The item is classified as a commercial item and must be manufactured by a supplier approved on the Qualified Products List (QPL); only QPL-approved manufacturers are eligible at the time of award. The product has a non-extendable shelf life of 180 months and is designated as a Type I (Code Y) item, with packaging and preservation strictly governed by MIL-STD-2073-1E and MIL-STD-129. Mercury and mercury-containing compounds are prohibited from direct contact with the item or its packaging, with exceptions only for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents, and any such components must meet additional containment standards. Packaging must be in a medium-duty, waterproof, greaseproof, and opaque bag per MIL-DTL-117, Type II, Class C, Style 1, especially for direct vendor delivery, foreign military sales, or stock shipments. Preservation methods require dry, clean packaging with no mercury-based compounds, and markings must comply with MIL-STD-129, including the special marking code for Type I shelf life. The delivery is FOB origin with a firm fixed price and zero variance allowed in quantity, to be delivered within 126 days after contract award, with inspection and acceptance occurring at the destination. The contract is subject to all technical and quality requirements referenced in the DLA Master List, and the sole point of performance and delivery is Tinker AFB, Oklahoma.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

FILTER ELEMENT, FLUID

Solicitation # SPE7M1-26-T-250B

This contract covers the procurement of a fluid filter element identified by NSN 4330012808418 and part number F64318, with approved suppliers including Falls Filtration Technologies Inc., Wix Corp, Honeywell International Inc, Donaldson Company Inc, and Genuine Parts Company. The item is classified as a critical application and must comply strictly with DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute materials require prior approval unless already authorized by specification. The unit of issue is each, with a contract quantity of two units to be delivered within 20 days from the award date, FOB origin, under Solicitation SPE7M1-26-T-250B. Packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling governed by these standards. Shipping must occur via the fastest traceable method, excluding parcel post, and all deliveries must be directed to the specified address at Aberdeen Proving Ground, Maryland. Inspection and acceptance occur at the destination, with no variance permitted in quantity. The required delivery date is August 3, 2026, and the contract includes a government-only point of contact and tracking identifiers for logistics and accountability.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 3 hours ago

DEADLINE

CIRCUIT BREAKER

Solicitation # SPE7M1-26-U-5050

The contract solicits 134 units of a circuit breaker identified by NSN 5925-01-430-2318 under solicitation number SPE7M1-26-U-5050, with a response deadline of August 20, 2026, and a required delivery within 99 days of award. The item is classified as a commercial item description, eliminating the need for a Form 239 and enabling competitive procurement using data available through the drawing repository referencing the CID number and NSN. All supply requirements must comply with the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. Government identification must be removed from non-accepted supplies, and full and open competition is mandated. The contracting activity falls under the Department of Defense’s Maritime Supply Chain, with primary point of contact Bryan Fair reachable via email and phone. The solicitation is posted on DIBBS, and performance is expected within U.S. territory.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 3 hours ago

DEADLINE