Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

ELECTRONIC MODULE, STAN

Active
SPE4A6-26-T-11NKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single standardized electronic module identified by NSN 5963-01-204-7488, with a delivery requirement of 20 days after delivery order. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation or award date depending on acquisition size. Source approval documentation must be submitted per RD002, and the item is subject to Covered Defense Information requirements. Cybersecurity compliance mandates CMMC Level 2 certification through an accredited third-party assessment organization. Packaging must adhere to DLA specifications, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Government identification must be removed from non-accepted supplies, and physical marking of the bare item is required. Item Unique Identification is waived by the service customer per DFARS 252.211-7003(c)(1)(i). Technical data associated with the item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to such data is restricted to contractors holding approved US/Canada Joint Certification Program certification, having completed mandated DOD export control training, and receiving explicit authorization from DLA. The solicitation number is SPE4A6-26-T-11NK, issued on August 3, 2026, with responses due by August 11, 2026, under NAICS code 334418. Performance is set for Houston, Texas, with primary point of contact Tre Tillman via email and phone provided.

General Info

Procure NSN 5963-01-204-7488, deliver in 20 days, CMMC Level 2, ITAR/EAR controlled, DLA standards, Houston TX.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

ATTN LF2/FIN SERV, HOUSTON, TX, 77058, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-11NK.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Tre Tillman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
ELECTRONIC MODULE,STANDARDIZED
ELECTRONIC MODULE, STANDARDIZED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD002, COVERED DEFENSE INFORMATION APPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5963-01-204-7488 Quantity: 1 EA Purchase Request: 7017673364QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334418
New
DIBBS
Electronic Component Marking and Labeling ServicesThe contract requires application of surface markings on electronic components in strict compliance with IPC/JEDEC J-STD-609 standards, ensuring accurate identification of lead and lead-free configurations to support global supply chain traceability and regulatory alignment. All labeling must adhere to OSHA Hazard Communication requirements for hazardous materials, encompassing proper signage, material safety data, and worker protection protocols to ensure safe handling and processing environments. The work falls under NAICS code 334418 and is structured as a subcontract within the Department of Defense’s Maritime Supply Chain initiative, with bids due by August 14, 2026, and the opportunity publicly posted on August 3, 2026. Performance location and point of contact details are unspecified, but all work must meet the technical and safety mandates outlined in the referenced standards without deviation.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Manufacture and Supply of Fixed Wire ResistorsThe contract calls for the manufacture and delivery of seven fixed wire resistors with the National Stock Number 5905010619055, manufactured to meet the technical, packaging, and marking standards set by the Defense Logistics Agency, including adherence to J-STD-609 and RP001 specifications. All units must be produced and packaged in strict compliance with these military-grade requirements to ensure interoperability and quality assurance for defense applications. The place of performance is designated as Hill Air Force Base with ZIP code 84056-5734, indicating where the finished product must be delivered or where operational integration is expected. The solicitation, issued under the NAICS code 334418 for other electronic component manufacturing, is classified as a subcontract and was posted on August 3, 2026, with responses due by August 14, 2026. The contracting activity is managed by the Active Devices Division within the Department of Defense, and the opportunity is accessible through the DIBBS platform under solicitation reference SPE7M526T365M.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Solid-State Relay Supply and Compliance PackagingThe contract requires the supply of ten solid-state relays engineered to meet stringent military specifications, with all units delivered in full compliance with military packaging, labeling, hazardous materials communication, and delivery protocols. Each relay must adhere to DFARS regulatory requirements and be packaged under MIL-STD-129 for uniform labeling, MIL-STD-2073-1E for preservation and packaging of military items, and J-STD-609 for standardized marking of electronic components. The items are destined for delivery to a U.S. Navy vessel, with performance occurring at FPO, ZIP 96663, ensuring secure and compliant transit through military logistics channels. The contract is classified as a subcontract under NAICS code 334418 and is issued by the Active Devices Division of the Department of Defense. All proposals must be submitted by August 14, 2026, with the solicitation posted on August 3, 2026, allowing potential vendors a precise window to prepare compliant bids. The requirement emphasizes complete adherence to DoD standards, with no room for deviations in documentation, packaging, or material handling. Suppliers must demonstrate proven capability in military-grade electronics delivery, including full traceability and hazardous material reporting, to ensure seamless integration onto naval platforms. The contract underscores the critical need for reliability and conformity in electronic components used in defense systems, where failure is not an option.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Electronic Component Manufacturing – Resistor Network (Film, Fixed)The contract calls for the manufacture and delivery of ten units of fixed film resistor networks that must fully comply with MIL-PRF-83401H and all applicable defense electronics standards, ensuring high reliability and performance under demanding operational conditions. These components are critical to defense systems and require stringent quality controls, materials sourcing, and testing procedures consistent with military specifications to guarantee long-term functionality in harsh environments. The product is intended for use in defense applications and must meet exacting electrical, mechanical, and environmental requirements defined in the referenced military performance specification. This is a subcontract under the Department of Defense, managed by the Maritime Supply Chain, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, with the North American Industry Classification System code 334418 indicating classification under other electronic component manufacturing. The contract is not set aside for any specific small business category and is accessible through the DIBBS platform. Contractors must ensure full adherence to all technical, documentation, and delivery requirements tied to military-grade electronic components, with no flexibility on compliance or performance benchmarks.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Solid-State Relay Supply (Commercial Off-The-Shelf)The contract calls for the supply of two commercial off-the-shelf solid-state relays that must fully comply with military packaging, preservation, and marking standards, including precise lead finish identification to ensure compatibility and reliability in defense applications. These components are not standard industrial parts but must meet stringent military-grade handling and documentation requirements despite being commercially available. The place of performance is designated as Keyport, Washington, with a ZIP code of 98345-7610, indicating the delivery and inspection site for these critical electronic components. The solicitation is categorized as a subcontract under NAICS code 334418, which pertains to other electronic component manufacturing, and is issued by the Active Devices Division of the Department of Defense. Responses are due by August 14, 2026, with the request posted on August 3, 2026, giving suppliers approximately eleven days to submit proposals that demonstrate full adherence to all technical and regulatory specifications outlined in the solicitation.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Electrical Connector Manufacturing & AssemblyThe contract solicits qualified subcontractors to manufacture and assemble high-reliability electrical connectors, specifically receptacles, meeting stringent DLA and defense industry standards. The scope encompasses the full lifecycle of production including design validation, fabrication, material sourcing, assembly, and comprehensive testing to ensure performance, durability, and compliance with military specifications. All work must align with the NAICS code 334418 and adhere to the quality and documentation requirements expected by the Department of Defense's Active Devices Division. The opportunity is open for bids with a response deadline of August 14, 2026, and was posted on August 3, 2026. The contract is structured as a subcontract, indicating it supports a larger prime contract or program under the Department of Defense. Performance location and point of contact details are not specified in the provided data, but bidders must be prepared to meet defense-grade manufacturing requirements and deliver products that support critical military systems. Bidders should access the official DIBBS portal for full documentation and submission guidelines.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
Qualified Electrical Connector Manufacturing & SupplyThe contract requires the manufacture and supply of a qualified plug-type electrical connector identified by NSN 5935012201934 and part number MS3456W16-7P, meeting exacting technical standards specified in SAE-AS34561 Revision A and SAE AS50151 Revision E. The product must be listed on the DLA Qualified Products List for Federal Supply Class 5935 and include TDP Rev A Gen 1 marking to indicate suitability for critical application use. Manufacturing and delivery must adhere to stringent quality and documentation requirements to ensure full compliance with military aerospace specifications. The solicitation is a subcontract opportunity posted by the Active Devices Division under the Department of Defense with a response deadline of August 14, 2026. The North American Industry Classification System code is 334418, indicating classification under Other Electronic Component Manufacturing. Performance of the contract is designated to take place at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The contract is not subject to any specific set-aside designation and is accessible via the DIBBS procurement portal for interested parties to review full terms and submission requirements.
ACTIVE DEVICES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
SOLENOID ASSEMBLY
Solicitation # SPE7M1-26-T-221H
The contract is for the procurement of a solenoid assembly identified by NSN 5945-01-122-3045 and part number 6211-546, supplied by ASAP SEMICONDUCTOR, LLC, with a quantity of ten units. Delivery is required within 99 days, shipped FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and DLA packaging standards, including specific preservation methods, unit packaging codes, and marking per MIL-STD-129. Special marking per IPC/JEDEC J-STD-609 is mandatory on each unit package to indicate lead content or absence thereof, with precise placement requirements. The use of mercury and mercury-containing compounds is strictly prohibited unless part of approved exemptions like batteries, sensors, or weapon systems, and portable mercury-containing devices must have shockproof containment with a secondary boundary as specified by NAVSEA. Class I ozone-depleting substances are banned in all manufacturing and processing stages unless prior written approval is granted by the contracting officer, though this does not apply to commercial items or part-number-only components. The delivery address is DLA Distribution San Joaquin in Tracy, California, and the required ship date is January 20, 2026, with an original delivery deadline of February 21, 2026. The contract references DLA’s Master List of Technical and Quality Requirements for applicable R and I specifications and incorporates procurement, packaging, and environmental compliance requirements under federal and military standards.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M0-26-T-028A
Offerors responding to solicitation SPE7M0-26-T-028A must comply with strict domestic sourcing requirements, including the Berry Amendment and Buy American Act, with the Berry Amendment threshold lowered to $150,000. Non-domestic materials require full disclosure to the contracting point of contact. The solicitation prohibits the use of covered telecommunications equipment or services under FAR 52.204-24 and DFARS 252.204-7016, and additive manufacturing is not permitted unless specifically approved in advance. Quotes must not include Fast Pay terms, and offerors are strongly encouraged to submit quantity ranges to accommodate fluctuating demand and reduce administrative overhead, though this does not apply to Auto IDC. Small business joint ventures must submit required representations for applicable categories including small business, service-disabled veteran-owned, women-owned, economically disadvantaged women-owned, and HUBZone status. All vendors must register via DLA’s Account Management & Provisioning System (AMPS) within two months to continue accessing the Vendor Shipment Module and shipping goods; failure to register will result in loss of shipping capability. VSM WebServices users must update their internal schemas by the specified deadline to avoid disruption. Offers submitted after the closing date must include a “No Bid” submission on DIBBS with an anticipated quote date or reason for non-submission to inform buyers and prevent unnecessary cancellations. The required item is a circuit card assembly, one unit, with a five-day delivery requirement to Camp Pendleton, and all responses must be submitted through DIBBS by the specified deadline.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMBLY
Solicitation # SPE7M1-26-T-248A
This contract pertains to the procurement of 10 units of a circuit card assembly identified by NSN 5998-01-449-2980 and part number 429-138-00, issued under solicitation SPE7M1-26-T-248A by the Department of Defense’s Defense Logistics Agency. Delivery is required within 157 days from the award date, with shipment FOB origin and inspection and acceptance occurring at the destination, Robins Air Force Base in Georgia. The items must be packaged in strict compliance with MIL-STD-2073-1E and MIL-STD-129, including special ESD marking code 39, and must be protected against electrostatic discharge and electromagnetic interference using only MIL-PRF-81705 certified materials from qualified manufacturers listed on QPL-81705. The packaging must incorporate Type I and Type III barrier materials as specified, with adequate cushioning to prevent physical damage to leads and terminals, even when not explicitly mandated by the packaging code. All packaging and handling must occur at approved ESD/EMI protective work stations. The contract incorporates technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including the replacement of obsolete standards such as MIL-PRF-55110 and MIL-P-50884 with MIL-PRF-31032 for printed circuit boards, and mandates equivalent quality for laminate materials formerly governed by the canceled MIL-S-13949. Compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 is required through a self-assessment. The supplier must ensure all materials and processes meet applicable defense standards, verify compliance with packaging and ESD/EMI safeguards, and provide technical documentation if the solicitation’s preservation method does not address ESD/EMI protection but the item is susceptible to such environmental factors. The item is classified as a critical application item, and the contract prohibits the removal of government identification from non-accepted supplies. The delivery deadline is January 19, 2027, with an original required date of December 27, 2026, and all shipments must adhere to DLA transportation and distribution procedures.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334418
New
Federal
Portable Remote Speaker-Microphone (RSM) SupplyThe contract is for the supply of ruggedized, portable remote speaker-microphones designed for use with military radios, featuring an IP68 rating for dust and water resistance, a standard 3.5mm audio jack, an emergency button for immediate distress signaling, and a programmable button for customizable operational functions. The equipment must meet strict military-grade durability standards to ensure reliable performance in harsh environments. This procurement is structured as a subcontract under a Service-Disabled Veteran-Owned Small Business set-aside, specifically targeting businesses owned and controlled by service-disabled veterans, as defined under FAR 19.14. The North American Industry Classification System code for this requirement is 334418, indicating it falls under the manufacturing of communications equipment. The solicitation was posted on August 3, 2026, with a response deadline of August 5, 2026, emphasizing a swift turnaround for vendor submissions. The place of performance is identified as Bremerton, Washington, with a zip code of 98314, and the contracting activity is led by DLA Maritime - Puget Sound under the Department of Defense. While no specific point of contact or funding details are included, the requirement clearly prioritizes secure, mission-critical communication hardware compatible with existing military radio systems, and the contract is restricted to qualified SDVOSB entities eligible to compete under the set-aside provisions.
DLA Maritime - Puget Sound

POSTED

about 22 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334418
New
DIBBS
Circuit Card Assembly Manufacturing – Electric Control UnitThe contract requires the manufacture of eleven units of a CONTROL, ELECTRIC LI circuit card assembly identified by NSN 6220-01-710-4814 and part number 15-9-15-110-0FL, with full compliance to military packaging, marking, and handling standards. The work falls under NAICS code 334418 and is classified as a subcontract, indicating it is part of a larger procurement effort managed by the ASC COMMODITIES DIVISION under the Department of Defense. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, and all deliverables must meet rigorous defense-grade specifications to ensure operational readiness and compatibility with existing military systems. The solicitation was posted on August 2, 2026, with a firm deadline for responses on August 10, 2026, allowing potential vendors a limited window to submit proposals. The contract is accessible through the DIBBS portal, where detailed technical requirements and submission guidelines are expected to be available. Although no specific set-aside designation or point of contact is listed, the emphasis on military compliance and the controlled environment of the Department of Defense procurement process implies strict qualification criteria, including certifications related to defense manufacturing, quality assurance, and supply chain security. Vendors must be prepared to demonstrate capacity for low-volume, high-integrity production while adhering to all regulatory and logistical standards applicable to defense electronics.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541611
New
DIBBS
Traceability Documentation and DART Database SubmissionThe contract requires the maintenance and submission of complete traceability records for airworthiness parts through the DLA Automated Records Traceability DART database, ensuring full accountability from manufacturing through to final use. This includes the accurate uploading of manufacturer information, lot-level traceability data, and all relevant test results to meet stringent defense aviation standards. The obligation extends to timely and error-free documentation to support regulatory compliance and operational readiness across the Department of Defense supply chain. This subcontract is issued under NAICS code 541611 and is active with a response deadline of August 17 2026 and a posted date of August 3 2026. It is managed by the ASC Commodities Division under the Department of Defense and requires strict adherence to DART protocols without reliance on external or paperbased systems. There is no designated set aside classification and no specific performance location listed indicating the work may be performed remotely or at any qualifying facility meeting federal traceability requirements. Failure to comply with data submission timelines or accuracy standards will result in contract noncompliance.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and CUI Compliance (CMMC Level 2)The contract requires implementation and self-assessment for CMMC Level 2 compliance to safeguard Controlled Unclassified Information related to design, manufacturing, and testing data. It applies specifically to systems that handle technical data and traceability records, ensuring that appropriate security controls are in place to protect sensitive information from unauthorized access, disclosure, or compromise. The contractor must align with the CMMC framework’s requirements to achieve and maintain compliance, which includes documenting policies, conducting internal assessments, and demonstrating readiness for potential audits. This is a subcontract under the Department of Defense, managed by the ASC Commodities Division, with a NAICS code of 541512 indicating information technology services. The solicitation was posted on August 3, 2026, and responses are due by August 17, 2026. The performance location is not specified, and there is no set-aside designation. The contract is accessible via a public DIBBS portal, and while a point of contact is not provided, responsible parties are expected to adhere to all CMMC Level 2 controls and maintain ongoing compliance throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 493190
New
DIBBS
MIL-STD-2073-1E and MIL-STD-129 Packaging and MarkingAll units must be packaged and marked in full compliance with MIL-STD-2073-1E and MIL-STD-129, encompassing detailed preservation methods designated as PRES MTHD: 10, and requiring accurate lot and serial number labeling, CAGE code marking, and barcoding for traceability and inventory management. Palletization must adhere to DLA RP001 specifications to ensure uniformity, stability, and readiness for handling and transport within the Department of Defense logistics network. This subcontract is issued under NAICS code 493190 by the ASC Commodities Division of the Department of Defense, with responses due by August 17, 2026, and performance expected to support military supply chain requirements regardless of specific geographic location.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
First Article Testing (FAT) and Government Test Unit ProductionThe contract requires the production and submission of government test units under CLIN 0002 and CLIN 0003 for First Article Testing, with full documentation including a comprehensive FAT report, inspection at the manufacturing origin, and delivery within specified timeframes of 210 and 296 days ADO respectively. The effort is part of a subcontract under the Department of Defense’s ASC Commodities Division, with a NAICS code of 332722 indicating precision instrument manufacturing, and is focused on delivering qualified test units that meet rigorous government technical and procedural standards. The timeline is tightly defined, and the requirement for complete documentation and on-site inspection ensures traceability and compliance before acceptance. The solicitation, posted on August 3, 2026, has a response deadline of August 17, 2026, and is accessible via the DIBBS platform. Although no set-aside type or specific point of contact is provided, the place of performance and organization details indicate this is a federal defense procurement with expectations for full adherence to military quality assurance protocols. Participation requires the ability to manage complex production timelines, document every stage of manufacturing and testing, and coordinate with government inspection teams to validate conformance prior to final delivery.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332722
New
DIBBS
Precision Machining of Critical Safety BoltsThe contract mandates the manufacture of 271 precision machine bolts designated by NSN 5306-01-564-3371, engineered to meet strict technical standards, with specific attention to correcting a weight discrepancy found on part number 70400-38159 for MP-35N material. The scope of work encompasses the full production cycle including sourcing of approved materials, precision machining, heat treatment processes, and comprehensive quality verification to ensure compliance with safety and performance requirements. All components must be produced under rigorous quality control protocols to maintain dimensional accuracy and material integrity critical to their function. This subcontract, issued under NAICS code 332722 by the ASC Commodities Division of the Department of Defense, is posted for bid with a response deadline of August 17, 2026. The work is tied to a defense-related production need, emphasizing reliability and adherence to military specifications. While details on delivery location and point of contact are not provided, the place of performance and contracting entity indicate that the finished bolts are intended for use in mission-critical defense systems, requiring full traceability and certification throughout the manufacturing process.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
DIBBS
Commercial Item Subcontract ManagementThe contract titled Commercial Item Subcontract Management requires the successful offeror to oversee and manage subcontracts for commercial products in full compliance with Federal Acquisition Regulation 52.244-6 and Defense Federal Acquisition Regulation Supplement 252.244-7000. This includes the accurate and complete flow-down of all applicable clauses to subcontractors and ensuring that small business participation is properly integrated throughout the supply chain in alignment with the stated set-aside requirements. All subcontracting activities must adhere to the standards established for commercial item acquisition while maintaining rigorous documentation and oversight to demonstrate compliance. This solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to compete, and the North American Industry Classification System code 541611 applies, indicating the work involves management, scientific, and technical consulting services. The contracting activity is under the ASC Commodities Division of the Department of Defense, and responses must be submitted by August 13, 2026. The contract is intended to support commercial item procurement efforts with a strong emphasis on fostering small business involvement across all levels of subcontracting.
Administrative Management and General Management Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541511
New
DIBBS
Cybersecurity and Covered Defense Information SafeguardingThis contract requires the implementation and maintenance of cybersecurity controls aligned with NIST SP 800-171 to protect covered defense information as mandated by DFARS 252.204-7012, ensuring compliance with federal security standards for sensitive defense data. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and is governed by the NAICS code 541511, which pertains to custom computer programming services. The contract is administered by the ASC Commodities Division within the Department of Defense and places no specified location for performance, indicating flexibility in execution as long as compliance obligations are met. Respondents must submit proposals by the deadline of August 13, 2026, with the solicitation posted on August 3, 2026, through the DIBBS platform. Although no point of contact or physical performance location is provided, the expectation is for contractors to establish and sustain a verifiable, auditable cybersecurity posture throughout the contract period. The emphasis is on continuous compliance with NIST controls to safeguard covered defense information, and failure to maintain these standards could result in contract termination or penalization under applicable defense acquisition regulations.
Custom Computer Programming Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541512
New
DIBBS
Electronic Invoicing and WAWF Compliance SupportThis contract requires the preparation and submission of electronic invoices through the Wide Area Workflow system with full compliance to Federal Acquisition Regulation clauses and seamless integration support to ensure accurate and timely processing. The work must be performed under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to bid, and the North American Industry Classification System code 541512 indicates the scope centers on computer systems design services, specifically within the realm of invoicing and financial data systems. The opportunity was posted on August 3, 2026, with submissions due by August 13, 2026, and is issued under the ASC Commodities Division of the Department of Defense, where performance is expected to align with federal electronic invoicing standards and system requirements, regardless of a specified physical location. All bidders must demonstrate proven capability in WAWF integration, proper FAR clause representation, and the technical infrastructure to handle secure, compliant electronic invoicing for government contracts.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541380
New
DIBBS
Military-Grade Inspection and Acceptance ServicesThe contract requires comprehensive origin-based inspection and acceptance testing for critical components, strictly adhering to MIL-STD-1916 or ASQ Z1.4 standards with an AQL of 0.1 for critical defects, ensuring the highest level of quality control. Full traceable reporting must be maintained throughout the process, documenting every inspection step and result with complete accountability and data integrity. This work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense contracting. The procurement falls under NAICS code 541380, indicating technical and scientific consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on August 3, 2026, with a firm response deadline of August 13, 2026, leaving a ten-day window for qualified small businesses to submit proposals. Although the place of performance and point of contact details are unspecified, the contract is accessible via the DIBBS portal, and performance expectations center on precision testing and documentation to meet military-grade quality requirements without deviation.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 322291
New
DIBBS
Defense Logistics Agency (DLA) Compliance Packaging and Preservation ProviderThe contract requires a small business to provide full packaging, preservation, and labeling services that meet military standards, specifically MIL-STD compliance, with an emphasis on mercury-free methods for environmental and safety compliance. All work must adhere to Defense Logistics Agency requirements, including the application of barcoding and precise container marking to ensure traceability and logistical efficiency across the supply chain. Services must be performed under a Total Small Business Set-Aside, restricting eligibility exclusively to small businesses certified by the SBA, and is classified under NAICS code 322291, which pertains to other paper product manufacturing. The solicitation is issued by the ASC Commodities Division within the Department of Defense and is open for response until August 13, 2026, with a posting date of August 3, 2026. Performance location details are unspecified, but all work must satisfy federal defense logistics standards without exception.
Sanitary Paper Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 334511
New
DIBBS
Qualified Product/Manufacturer Sourcing AgentThe contract seeks a qualified small business to source defense-compliant electronic components in accordance with MIL-DTL-24779D specifications and H02 clause requirements, ensuring all products originate exclusively from manufacturers or suppliers listed on the Qualified Products List or Qualified Manufacturers List. The role involves identifying, vetting, and procuring components that meet stringent military standards, with the expectation that all sourcing activities adhere to the technical and compliance frameworks established by the Department of Defense. The effort is classified as a total small business set-aside under FAR 19.5, restricting eligibility exclusively to small businesses as defined by the SBA, with the NAICS code 334511 indicating the industry focus on electronic component manufacturing. The solicitation, issued by the ASC Commodities Division under the Department of Defense, requires full responsiveness to the referenced specifications and compliance with all associated military standards. Responses are due by August 13, 2026, and the contract will be executed as a subcontract. While no point of contact or physical performance location is provided, the work is expected to support defense electronics supply chains through rigorous supplier qualification and component sourcing processes. All activities must ensure traceability, authenticity, and regulatory alignment with current DoD procurement guidelines.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SHROUD
Solicitation # SPE4A6-26-T-11MB
The contract specifies the procurement of 817 units of BUSHING, SHROUD with NSN 3120-01-131-0493 under solicitation SPE4A6-26-T-11MB, with a delivery requirement of 130 days ADO. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the appropriate revision determined by the acquisition type and relevant dates. The item is subject to tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers, and configuration change management must follow engineering change proposal and variance procedures. Inspection and acceptance must occur at the origin, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per the Service customer’s request, and DFARS 252.211-7003(c)(1)(i) governs this exception. Technical data associated with the item is controlled under ITAR or EAR, prohibiting export without prior authorization from the Department of State or Commerce, including disclosures to foreign persons regardless of location. Only DLA contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access this data. Packaging must comply with DLA standards, and covered defense information protocols apply. The place of performance is Jacksonville, Florida, with Tracy Fletcher as the primary point of contact.
Ball and Roller Bearing Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details